PAL6374.101AHLT

_Voltage Regulator (VR) - PAL6374.XXXAHLT Series_ 

## SMT Power Inductors 

_**Current Rating:** Over 71A TYP_ _**Inductance Range:** 70nH to 180nH_ _**Height:** 12.0mm Max_ 

_**Footprint:** 10.0mm x 5.0mm Max_ 

|Part<br>Number|Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C<br>Inductance1<br>@ 0ADC<br>(nH+/-15%)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C<br>Inductance2<br>@ I sat<br>(nH MIN)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C<br>DCR (1-2)<br>(+/- 10%)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C<br>Saturation Current5<br>(A TYP)|Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C<br>Saturation Current5<br>(A TYP)|Rated Current3<br>(A TYP)|
|---|---|---|---|---|---|---|
|||||(A TYP)<br>25°C|(A TYP)<br>100°C||
|PAL6374.700AHLT|70|49|0.135 mOhm|134|114|77|
|PAL6374.800AHLT|80|56||117|100||
|PAL6374.900AHLT|90|63||105|90||
|PAL6374.101AHLT|100|70||96|82||
|PAL6374.121AHLT|120|84||77|66||
|PAL6374.151AHLT|150|105||58|50||
|PAL6374.181AHLT|180|126||47|40||



## **NOTES:** 

1. Inductance measured at 100kHz, 1.0 Vrms. 

2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current. 3. Rated Current is the DC current which causes the part temperature to increase by approximately 40C. It is a calculated value and will vary within application based on ambient temperature, air flow, surrounding component temperature and heat sinking. Part temperature should not exceed 125C under worst case operating conditions. Part temperature should be verified in the end application. 

4. The nominal DCR is measured at point Z\ 2. , as shown below on the mechanical drawing. 

5. The saturation current is the typical current which causes the inductance to drop by 20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 

6. In high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may neccessitate derating the current in order to limit the temperature rise of the component. To determine the approximate total losses (or temperature rise) for a given application, the coreloss and temperature rise curves can be used. 

7. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to industry standard tape and reel specification EIA-481. The tape and reel for this product has a width (W=24mm), pitch (Po=12mm) and depth (Ko=12.2mm). Samples of these parts can be ordered by removing the HLT suffix and replacing with HL. 

8. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 

9. Sample Value only. Guaranteed by Design and not tested in production 

1 a 

P928.Pre (10/22) 

PulseElectronics.com 

## SMT Power Inductors 

_Voltage Regulator (VR) - PAL6374.XXXAHLT Series_ 

**==> picture [76 x 37] intentionally omitted <==**

**==> picture [469 x 243] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mechanical Schematic<br>1<br>2<br>Weight: 2.74grms<br>Tape &Reel: 320/ Reel<br>Dimensions: mm<br>Unless otherwise specified ,<br>all tolerances are ± 0.25<br>**----- End of picture text -----**<br>


## **PAL6374.XXXAHL** 

**==> picture [538 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
TAPE & REEL INFO P1<br>**----- End of picture text -----**<br>


**==> picture [328 x 199] intentionally omitted <==**

**----- Start of picture text -----**<br>
P1<br>PIN<br>CIRCULAR HOLES<br>INDICATOR<br>W<br>MARK PART PER<br>FINAL OUTLINE<br>D/C  CTRY<br>PART NUMBER<br>**----- End of picture text -----**<br>


## USER DIRECTION OF FEED 

|**SURFACE**|**MOUNTING TYPE, REEL/TAPE LIST**|**MOUNTING TYPE, REEL/TAPE LIST**|||
|---|---|---|---|---|
|**TYPE**|**REEL SIZE (mm)**||**QTY**||
||**W ± 0.30**<br>**P1 ± 0.1**|**(K0)**|**PCS/REEL**||
|**PAL6374.XXXAHL**|24.0<br>12.0|12.2|350||
|nics.com||||P928.Pre (10/22)|



PulseElectronics.com 

2 

SMT Power Inductors _Voltage Regulator (VR) - PAL6374.XXXAHLT Series_ 

## **PAL6374.XXXAHLT, L vs I, Curve 25°C** 

## **PAL6374.XXXAHLT, L vs I, Curve 100°C** 

P928.Pre (10/22) 

PulseElectronics.com 

3 

_Voltage Regulator (VR) - PAL6374.XXXAHLT Series_ 

## SMT Power Inductors 

## **PAL6374.XXXAHLT, Core Loss** 

## For More Information: 

**Americas -** prodinfo_power_americas@yageo.com  | **Europe -** prodinfo_power_emea@yageo.com  | **Asia -** prodinfo_power_asia@yageo.com 

Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2022. Pulse Electronics, Inc. All rights reserved. 

P928.Pre (10/22) 

PulseElectronics.com 

4