PAA110

**PAA110 Dual Single-Pole, Normally Open OptoMOS[®] Relays** 

|**Parameters**|**Ratings**|**Units**|
|---|---|---|
|Load Voltage|400|VP|
|Load Current|150|mA|
|Max RON|22|Ω|



## **Features** 

- 3750Vrms Input/Output Isolation 

- Small 8-Pin Package 

- Low Drive Power Requirements (TTL/CMOS Compatible) 

- High Reliability 

## **Description** 

PAA110 is a 400V, 150mA, 22 Ω, dual normally open (1-Form-A) optically isolated Solid State Relay. Its efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture to provide 3750Vrms of input to output isolation. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED 

This performance leader provides high peak load voltage handling capability and improved peak load current handling. 

- Arc-Free With No Snubbing Circuits 

- VDE Compatible 

- FCC Compatible 

- No EMI/RFI Generation 

- Machine Insertable, Wave Solderable 

- Surface Mount and Tape Reel Version Available. 

## **Applications** 

- Telecommunications 

- Telecom Switching 

- Tip/Ring Circuits 

- Modem Switching (Laptop, Notebook, Pocket 

- Size) 

- Hook Switch 

- Dial Pulsing 

## **Approvals** 

- UL Recognized Component: File E76270 

- CSA Certified Component: Certificate 1175739 

- EN/IEC 60950-1 Certified Component: 

- TUV Certificate B 09 07 49410 004 

## **Ordering Information** 

|**Part #**|**Description**|
|---|---|
|PAA110|8-Pin DIP (50/Tube)|
|PAA110P|8-Pin Flatpack (50/Tube)|
|PAA110PTR|8-Pin Flatpack (1000/Reel)|
|PAA110S|8-Pin Surface Mount (50/Tube)|
|PAA110STR|8-Pin Surface Mount (1000/Reel)|



- Ground Start 

- Ringing Injection 

## **Pin Configuration** 

- Instrumentation 

- Multiplexers 

- Data Acquisition 

- Electronic Switching 

- I/O Subsystems 

- Meters (Watt-Hour, Water, Gas) 

- Medical Equipment-Patient/Equipment Isolation 

- Security 

||||AC/DC Configuration|AC/DC Configuration|AC/DC Configuration|AC/DC Configuration|AC/DC Configuration|AC/DC Configuration|AC/DC Configuration|AC/DC Configuration|
|---|---|---|---|---|---|---|---|---|---|---|
||||1|||||||8|
|+ Control - Switch #1|+ Control - Switch #1|+ Control - Switch #1|+ Control - Switch #1|||||||Load - Switch #1|
|– Control - Switch #1|– Control - Switch #1|– Control - Switch #1|2<br>– Control - Switch #1|||||||7<br>Load - Switch #1|
||||3|||||||6|
|+ Control - Switch #2<br>– Control - Switch #2|+ Control - Switch #2<br>– Control - Switch #2|+ Control - Switch #2<br>– Control - Switch #2|4<br>5<br>+ Control - Switch #2<br>– Control - Switch #2<br>Load - Switch #2<br>Load - Switch #2<br>~~R=~~ ~~EL~~||||||||



- Aerospace 

- Industrial Controls 

**Switching Characteristics of Normally Open Devices** 

**==> picture [127 x 82] intentionally omitted <==**

**----- Start of picture text -----**<br>
Form-A<br>IF<br>90%<br>ILOAD 10%<br>ton toff<br>**----- End of picture text -----**<br>


**==> picture [123 x 44] intentionally omitted <==**

**----- Start of picture text -----**<br>
RoHS<br>Pb 2002/95/EC e3<br>Qe CO<br>DS-PAA110-R04<br>**----- End of picture text -----**<br>


**1** 

**www.clare.com** 

**PAA110** 

## **Absolute Maximum Ratings @ 25ºC** 

**==> picture [237 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
Parameter Ratings Units<br>**----- End of picture text -----**<br>


|**Parameter**|**Ratings**|**Units**|
|---|---|---|
||||
|Blocking Voltage|400|VP|
|Reverse Input Voltage|5|V|
|Input Control Current<br>Peak (10ms)|50|mA|
||1|A|
|Input Power Dissipation1|150|mW|
|Total Power Dissipation2|800|mW|
|Isolation Voltage, Input to Output|3750|Vrms|
|Operational Temperature|-40 to +85|°C|
|Storage Temperature|-40 to +125|°C|



_Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied._ 

1  Derate linearly 1.33 mW / ºC 

2  Derate linearly 6.67 mW / ºC 

## **Electrical Characteristics @ 25ºC** 

**==> picture [457 x 15] intentionally omitted <==**

**----- Start of picture text -----**<br>
Parameter Conditions Symbol Min Typ Max Units<br>**----- End of picture text -----**<br>


|**Parameter**|**Conditions**|**Symbol**|**Min**|**Typ**|**Max**|**Units**|
|---|---|---|---|---|---|---|
||||||||
|**Output Characteristics**|||||||
|Load Current *<br>Continuous, AC/DC Configuration<br>Peak|-|IL|-|-|150|mA|
||t=10ms|ILPK|-|-|400||
|On-Resistance, AC/DC Configuration|IL=150mA|RON|-|15|22|Ω|
|Off-State Leakage Current|VL=400VP|ILEAK|-|-|1|μA|
|Switching Speeds<br>Turn-On<br>Turn-Off|IF=5mA, VL=10V|ton|-|-|1|ms|
|||toff|-|-|0.25||
|Output Capacitance|VL=50V, f=1MHz|COUT|-|25|-|pF|
|**Input Characteristics**|||||||
|Input Control Current|IL=150mA|IF|-|-|5|mA|
|Input Dropout Current|-|IF|0.4|0.7|-|mA|
|Input Voltage Drop|IF=5mA|VF|0.9|1.2|1.4|V|
|Reverse Input Current|VR=5V|IR|-|-|10|μA|
|**Common Characteristics**|||||||
|Input to Output Capacitance|-|CI/O|-|3|-|pF|



*NOTE:  If both poles operate simultaneously, then load current must be derated so as not to exceed the package power dissipation value. 

R04 

**www.clare.com** 

**2** 

**PAA110** 

## **PERFORMANCE DATA*** 

**==> picture [492 x 579] intentionally omitted <==**

**----- Start of picture text -----**<br>
Typical Turn-On Time Typical Turn-Off Time Typical On-Resistance Distribution<br>(N=50, IF=5mA, IL=150mADC, TA=25ºC) (N=50, IF=5mA, IL=150mADC, TA=25ºC) (N=50, IF=5mA, IL=150mADC, TA=25ºC)<br>25 25 35<br>30<br>20 20<br>25<br>15 15 20<br>10 10 15<br>10<br>5 5<br>5<br>0 0 0<br>0.15 0.21 0.27 0.33 0.39 0.45 0.05 0.07 0.09 0.11 0.13 0.15 13.1 13.7 14.3 14.9 15.5 16.1<br>Turn-On (ms) Turn-Off (ms) On-Resistance ( Ω )<br>Typical IF for Switch Operation Typical IF for Switch Dropout Typical Blocking Voltage Distribution<br>(N=50, IL=150mADC, TA=25ºC) (N=50, TA=25ºC) (N=50, TA=25ºC)<br>25 25 35<br>30<br>20 20<br>25<br>15 15 20<br>10 10 15<br>10<br>5 5<br>5<br>0 0 0<br>0.75 1.05 1.35 1.65 1.95 2.25 0.75 1.05 1.35 1.65 1.95 2.25 441.5 450.5 459.5 468.5 477.5 486.5<br>LED Current (mA) LED Current (mA) Blocking Voltage (VP)<br>Typical Turn-On Typical Turn-Off<br>Typical LED Forward Voltage Drop vs. LED Forward Current  vs. LED Forward Current<br>35 (N=50, IF=5mA, TA=25ºC) 0.40 (IL=150mADC) 0.12 (IL=150mADC)<br>0.35<br>30 0.10<br>0.30<br>25<br>0.08<br>0.25<br>20<br>0.20 0.06<br>15<br>0.15<br>0.04<br>10 0.10<br>0.02<br>5 0.05<br>0 0 0<br>1.17 1.19 1.21 1.23 1.25 0 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 50<br>LED Forward Voltage Drop (V) LED Forward Current (mA) LED Forward Current (mA)<br>Typical LED Forward Voltage Drop Typical Turn-On vs. Temperature Typical Turn-Off vs. Temperature<br>vs. Temperature (IL=150mADC) (IL=150mADC)<br>1.8 1.50 0.14<br>1.6 1.25 0.12<br>0.10<br>1.00<br>1.4 0.08<br>0.75<br>1.2 0.06<br>0.50<br>0.04<br>1.0 0.25 0.02<br>0.8 0 0<br>-40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100<br>Temperature (ºC) Temperature (ºC) Temperature (ºC)<br>IF=5mA<br>IIIIIFFFFF=50mA=30mA=20mA=10mA=5mA IIFF=10mA=20mA<br>Device Count (N) Device Count (N) Device Count (N)<br>Device Count (N) Device Count (N) Device Count (N)<br>Turn-On (ms) Turn-Off (ms)<br>Device Count (N)<br>Turn-On (ms) Turn-Off (ms)<br>LED Forward Voltage Drop(V)<br>**----- End of picture text -----**<br>


*The Performance data shown in the graphs above is typical of device performance.  For guaranteed parameters not indicated in the written specifi cations, please contact our application department. 

R04 

**www.clare.com** 

**3** 

**PAA110** 

## **PERFORMANCE DATA*** 

**==> picture [492 x 437] intentionally omitted <==**

**----- Start of picture text -----**<br>
Typical IF for Switch Operation  Typical IF for Switch Dropout<br>vs. Temperature vs. Temperature Typical On-Resistance vs. Temperature<br>(IL=150mADC) (IL=150mADC) (IF=5mA, IL=150mADC)<br>3.0 3.0 25<br>2.5 2.5 20<br>2.0 2.0<br>15<br>1.5 1.5<br>10<br>1.0 1.0<br>5<br>0.5 0.5<br>0 0 0<br>-40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100<br>Temperature (ºC) Temperature (ºC) Temperature (ºC)<br>Typical Load Current vs. Load Voltage  Typical Blocking Voltage<br>(IF=5mA, TA=25ºC) Typical Load Current vs. Temperature vs. Temperature<br>150 300 480<br>100 250 475<br>50 200 470<br>0 150 465<br>-50 100 460<br>-100 50 455<br>-150 0 450<br>-2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100<br>Load Voltage (V) Temperature (ºC) Temperature (ºC)<br>Typical Leakage vs. Temperature<br>Measured across Pins 5&6 or 7&8 Energy Rating Curve<br>0.035 1.2<br>0.030 1.0<br>0.025<br>0.8<br>0.020<br>0.6<br>0.015<br>0.4<br>0.010<br>0.005 0.2<br>0 0<br>-40 -20 0 20 40 60 80 100 10 μ s 100 μ s 1ms 10ms 100ms 1s 10s 100s<br>Temperature (ºC) Time<br>IIIFFF=20mA=10mA=5mA<br>LED Current (mA) LED Current (mA) On-Resistance () Ω<br>Load Current (mA) Load Current (mA) )Blocking Voltage (VP<br>A)<br>μ<br>Leakage (<br>Load Current (A)<br>**----- End of picture text -----**<br>


*The Performance data shown in the graphs above is typical of device performance.  For guaranteed parameters not indicated in the written specifi cations, please contact our application department. 

R04 

**www.clare.com** 

**4** 

**PAA110** 

## **Manufacturing Information** 

## **Moisture Sensitivity** 

All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, **IPC/JEDEC J-STD-020** , in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. 

Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. 

This product carries a **Moisture Sensitivity Level (MSL) rating** as shown below, and should be handled according to the requirements of the latest version of the joint industry standard **IPC/JEDEC J-STD-033** . 

|**Device**|**Moisture Sensitivity Level (MSL) Rating**|
|---|---|
|PAA110 / PAA110S / PAA110P|MSL 1|



## **ESD Sensitivity** 

This product is **ESD Sensitive** , and should be handled according to the industry standard **JESD-625** . 

## **Reflow Profile** 

This product has a maximum body temperature and time rating as shown below. All other guidelines of **J-STD-020** must be observed. 

|**Device**|**Maximum Temperature x Time**|
|---|---|
|PAA110 / PAA110S|250ºC for 30 seconds|
|PAA110P|260ºC for 30 seconds|



## **Board Wash** 

Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine-based or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. 

**==> picture [118 x 29] intentionally omitted <==**

**----- Start of picture text -----**<br>
RoHS<br>Pb 2002/95/EC e3<br>**----- End of picture text -----**<br>


R04 

**www.clare.com** 

**5** 

**PAA110** 

## **MECHANICAL DIMENSIONS** 

## **PAA110** 

## **PAA110S** 

## **PAA110P** 

**==> picture [395 x 548] intentionally omitted <==**

**----- Start of picture text -----**<br>
9.652 ± 0.381 7.620 ± 0.254 PCB Hole Pattern<br>2.540 ± 0.127 (0.380 ± 0.015) (0.300 ± 0.010)<br>(0.100 ± 0.005) 8-0.800 DIA. 2.540 ± 0.127<br>(8-0.031 DIA.)  (0.100 ± 0.005)<br>9.144 ± 0.508<br>6.350 ± 0.127 (0.360 ± 0.020)<br>(0.250 ± 0.005)<br>6.350 ± 0.127<br>(0.250 ± 0.005)<br>3.302 ± 0.051<br>0.457 ± 0.076 (0.130 ± 0.002)<br>(0.018 ± 0.003) 7.239 TYP. 0.254 TYP (0.300 ± 0.005)7.620 ± 0.127<br>(0.285) (0.01) 7.620 ± 0.127<br>4.064 TYP (0.300 ± 0.005)<br>(0.160)<br>Dimensions<br>0.889 ± 0.102 mm<br>(0.035 ± 0.004) (inches)<br>9.652 ± 0.381 PCB Land Pattern<br>(0.380 ± 0.015) 0.635 ± 0.127<br>2.540 ± 0.127 3.302 ± 0.051 (0.025 ± 0.005) 2.54<br>(0.100 ± 0.005)<br>(0.130 ± 0.002) (0.10)<br>6.350 ± 0.127 9.525 ± 0.254<br>(0.250 ± 0.005) (0.375 ± 0.010) 1.65 8.90<br>7.620 ± 0.254 (0.0649) (0.3503)<br>(0.300 ± 0.010)<br>0.457 ± 0.076 0.254 ± 0.127<br>(0.018 ± 0.003) (0.010 ± 0.0005) 0.65<br>(0.0255)<br>4.445 ± 0.127<br>(0.175 ± 0.005)<br>Dimensions<br>0.813 ± 0.120 mm<br>(0.032 ± 0.004) (inches)<br>2.286 MAX. PCB Land Pattern<br>(0.090 MAX.)<br>2.540 ± 0.127 0 MIN / 0.102 MAX<br>(0.100 ± 0.005) (0 MIN / 0.004 MAX) 2.54<br>(0.10)<br>(0.250 ± 0.005)6.350 ± 0.127 (0.370 ± 0.005)9.398 ± 0.127 (0.300 ± 0.010)7.620 ± 0.254 (0.025 ± 0.005)0.635 ± 0.127<br>8.70<br>1.55 (0.3425)<br>0.203 ± 0.013 (0.0610)<br>9.652 ± 0.381 (0.008 ± 0.0005)<br>(0.380 ± 0.015)<br>0.65<br>2.159 ± 0.025 (0.0255)<br>(0.085 ± 0.001)<br>0.457 ± 0.076<br>(0.018 ± 0.003) Dimensions<br>0.864 ± 0.120 mm<br>(0.034 ± 0.004) (inches)<br>**----- End of picture text -----**<br>


R04 

**www.clare.com** 

**6** 

**PAA110** 

## **PAA110P Tape & Reel** 

**==> picture [448 x 167] intentionally omitted <==**

**----- Start of picture text -----**<br>
330.2 DIA.<br>(13.00 DIA.)<br>W = 16.00<br>(0.63)<br>Top Cover<br>Tape Thickness Bo = 10.30<br>0.102 MAX.<br>(0.406)<br>(0.004 MAX.)<br>P = 12.00 Ao = 10.30<br>K0 = 2.70 (0.472) (0.406)<br>(0.106)<br>Dimensions<br>Embossed Carrier K1(0.079) = 2.00 User Direction of Feed mm<br>(inches)<br>NOTES:<br>1. All dimensions carry tolerances of EIA Standard 481-2<br>Embossment<br>**----- End of picture text -----**<br>


2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 

## **PAA110S Tape & Reel** 

**==> picture [438 x 170] intentionally omitted <==**

**----- Start of picture text -----**<br>
330.2 DIA.<br>(13.00 DIA.)<br>Top Cover W=16.00<br>Tape Thickness Bo=10.30 (0.63)<br>0.102 MAX. (0.406)<br>(0.004 MAX.)<br>Ao=10.30 P=12.00<br>K0=4.90 (0.406) (0.472)<br>(0.193)<br>K1=4.20 User Direction of Feed<br>Embossed Carrier (0.165) Dimensions<br>mm<br>(inches)<br>NOTES:<br>1. Dimensions carry tolerances of EIA Standard 481-2<br>Embossment 2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2<br>**----- End of picture text -----**<br>


## **For additional information please visit our website at: www.clare.com** 

Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice.  Neither circuit patent licenses nor indemnity are expressed or implied.  Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. 

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage.  Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 

Specification:  DS-PAA110-R04 © Copyright 2010, Clare, Inc. OptoMOS[®] is a registered trademark of Clare, Inc. All rights reserved.  Printed in USA. 7/29/2010 

**7**