PA18CAD04NAM1WS

## **Photoelectrics Diffuse-reflective Type PA18CAD04...WS, DC** 

- **Miniature sensor range** 

- **Range: 0.4 m** 

- **Sensitivity adjustment by potentiometer** 

- **Modulated, red light 625 nm** 

- **Supply voltage: 10 to 30 VDC** 

- **Output: 100 mA, NPN or PNP, N.O & N.C.** 

- **Degree of protection IP67, IP69K** 

- **LED indication for output, stability and power ON** 

- **Protection: reverse polarity, short circuit and transients** 

- **Cable and plug versions** 

- **Excellent EMC performance** 

- **Wide detection angle - short blind zone** 

## **Product Descri tion p** 

**Product Descri tion Orderin Ke** ~~a~~ **p g y PA18CAD04PAM1WS** The PA18CAD04...WS is performance-size ratio. **Type** part of a family of inexpenThe potentiometer used for **Housing style** sive general purpose diffuse adjustment of the sensitivi- **Housing size** reflective sensors in industrity makes the sensors highly **Housing material** al standard 18 mm cylindriflexible. The output type is **Housing type** cal ABS housing. NPN or PNP and the output **Detection principle** The sensors are useful in switching function is NO and **Sensing distance** applications where high-acNC. **Output type** curacy detection as well as The sensor is characterized **Output configuration** small size is required. by a wide detection angle as **Connection type** Compact housing and high well as a short blind zone. ~~I~~ **Sensitive adjustment** 

The sensors are useful in applications where high-accuracy detection as well as small size is required. Compact housing and high power LED for excellent 

## **T e Selection yp** 

|**Housing style**|**Range**|**Connection**|
|---|---|---|
||**Sn**||
|M18|0.4 m|Cable|
|M18|0.4 m|Plug|



**Ordering no. Ordering no. NPN PNP Make & break switching Make & break switching PA 18 CAD 04 NAWS PA 18 CAD 04 PAWS PA 18 CAD 04 NAM1WS PA 18 CAD 04 PAM1WS** 

**Specifications** according to EN60947-5-2 

|**Rated operating distance**(Sn) Up to 0.4 m,|) Up to 0.4 m,|
|---|---|
||reference target Kodak test|
|**Blind zone**<br>**Sensitivity control**<br> Electrical adjustment<br>Mecanical adjustment<br>Adjustable distance<br>**Temperature drift**<br>**Hysteresis**(H)<br> (differential travel)<br>**Rated operational volt.**(UB)<br>**Ripple**(Urpp)<br>**Output current**<br>Continuous (Ie)<br>Short-time (I)<br>**No load supply current**(Io)<br>**Minimum operational current**(Im)|card R27, white, 90%<br>reflective,100 x 100 mm<br>0 mm @ Snmax.<br>Adjustable by potentiometer<br>210˚<br>240˚<br>30-400 mm<br>≤ 0.2%/ºC<br>≤ 20%<br>10 to 30 VDC(ripple included)<br>≤ 10%<br>≤ 100 mA<br>≤ 100 mA<br>(max. load capacity100 nF)<br>≤ 15 mA @ 24 VDC<br>0.5 mA|
|**OFF-state current**(Ir)|≤ 100µA|
|**Voltage drop**(Ud)|≤ 2.0 VDC @ 100 mA|



|**Protection**|Short-circuit, reverse|
|---|---|
||polarityand transients|
|**Light source**|InGaAlP,LED,625 nm|
|**Light type**|Red,modulated|
|**Emitter angle**|±16º @ half sensing distan-|
|ce||
|**Light spot**|120 x 160 mm @ 200 mm|
|**Ambient light**|30.000 lux|
||incandescent lamp|
|**Operating frequency**|500 Hz|
|**Response time**||
|OFF-ON (tON)|≤ 1.0 ms|
|ON-OFF(tOFF)|≤ 1.0 ms|
|**Power ON delay **(tv)|≤ 100 ms|
|**Output function**||
|Type|NPN or PNP|
|Switchingfunction|NO and NC|
|**Indication**||
|Output ON|LED, yellow|
|Signal stability and power ON|LED, green (see curve for|
||condition of stability)|



Specifications are subject to change without notice (15.06.2017) 

**1** 

**PA18CAD04...WS** 

## **Specifications (cont.)** 

|**Environment**<br>**Housing material**||||
|---|---|---|---|
|Installation category<br>III (IEC 60664/60664A;<br>Body||ABS, grey||
|60947-1)<br>Front material||PMMA, red||
|Degree of pollution<br>3 (IEC 60664/60664A;<br>Cable gland||POM, Black||
|60947-1)<br>Trimmer shaft||POM, Dark Grey||
|Degree ofprotection<br>IP 67,IP 69K*<br>Locknuts||PBTP, black||
|**Ambient temperature**<br>Operating<br>-25°to +60°C (-13°to +140°F)<br>Mountingbracket<br>**Connection**||PPA,black||
|Storage<br>-40°to +70°C(-40°to +158°F)<br>Cable||PVC, grey, 2 m||
|**Vibration**<br>10 to 150 Hz, 1 mm/15 G<br>(IEC 60068-2-6)<br>**Shock**<br>30 g / 11ms, 3 pos, 3 neg<br>per axis<br>(IEC 60068-2-6,60068-2-32)<br>**Rated insulation voltage**<br>500 VAC (rms)<br>IEC protection class III<br>Plug<br>**Weight**<br>**CE-marking**<br>**Approvals**<br>~~DS —— ~~||4 x 0.25 mm2, Ø = 4.5 mm<br>M12, 4-pin<br>(CONB14NF-series)<br>With cable: 85 g<br>Withplug:  25g<br>Yes<br>cULus (UL508)<br>supply class 2<br> ~~li~~||
|* The IP69K test according to DIN 40050-9 for high-pressure, high-temperature wash-down applications.||* The IP69K test according to DIN 40050-9 for high-pressure, high-temperature wash-down applications.<br>90°||
|The sensor must not only be dust tight (IP6X), but also able to withstand high-pressure and steam cleaning.<br>The sensor is exposed to high pressure water from a spray nozzle that is fed with 80°C water at 8’000–<br>10’000 KPa (80–100bar) and a flow rate of 14–6L/min. The nozzle is held 100 –150 mm from the sensor at<br>angles of 0°, 30°, 60° and 90° for 30s each. The test device sits on a turntable that rotates with a speed of 5<br>times per minute. The sensor must not suffer any damaging effects from the high pressure water in appea-<br>rance and function.||The sensor must not only be dust tight (IP6X), but also able to withstand high-pressure and steam cleaning.<br>The sensor is exposed to high pressure water from a spray nozzle that is fed with 80°C water at 8’000–<br>10’000 KPa (80–100bar) and a flow rate of 14–6L/min. The nozzle is held 100 –150 mm from the sensor at<br>angles of 0°, 30°, 60° and 90° for 30s each. The test device sits on a turntable that rotates with a speed of 5<br>60°<br>30°<br>0°<br>ex.<br>=||



## **O eration Dia ram p g** 

**==> picture [498 x 89] intentionally omitted <==**

**----- Start of picture text -----**<br>
tv = Power ON delay<br>ON<br>Power supply OFF a<br>Present<br>Object (Target) Not Present<br>a<br>ON Tv<br>Break Output (N.C.) OFF icc<br>ON Tv<br>Make Output (N.O.)  OFF E e Lee LLU Ee OO LS Lee<br>**----- End of picture text -----**<br>


## **Wiring Diagrams** 

**==> picture [405 x 95] intentionally omitted <==**

**----- Start of picture text -----**<br>
NPN PNP<br>1 BN ° V 1 BN + V<br>4 BK<br><b<br>2 WH<br>2 WH<br>4 BK<br>3 BU <b 3 BU<br>V GND V GND<br>**----- End of picture text -----**<br>


Specifications are subject to change without notice (15.06.2017) 

**2** 

**PA18CAD04...WS** 

## **Si nal Stabilit Indication g y** 

**==> picture [244 x 161] intentionally omitted <==**

**----- Start of picture text -----**<br>
Excess Gain<br>1.1 Operation level x 1.1<br>1.0 Operation level<br>0.9 Operation level x 0.9<br>Time<br>Green LED ON<br>Yellow LED ON<br>**----- End of picture text -----**<br>


**==> picture [72 x 72] intentionally omitted <==**

## **APA18-MB1** 

**==> picture [245 x 161] intentionally omitted <==**

**----- Start of picture text -----**<br>
10<br>Ø 27<br>Ø 27<br>10<br>**----- End of picture text -----**<br>


## **Detection Diagram** 

**==> picture [245 x 183] intentionally omitted <==**

**----- Start of picture text -----**<br>
Sensor<br>Y<br>X R27Kodac test card Distance [inches]<br>0 3.9 7.9 11.8 15.7 19.7 23.6<br>60 0.20<br>40 0.13<br>20 0.07<br>0 0<br>-20 -0.07<br>-40 -0.13<br>-60 -0.20<br>0 100 200 300 400 500 600<br>Sensing range [mm]<br>[mm]<br>[inches]<br>**----- End of picture text -----**<br>


## **Excess Gain** 

**==> picture [245 x 183] intentionally omitted <==**

**----- Start of picture text -----**<br>
Distance [inches]<br>0 2.0 3.9 5.9 7.9 9.8 11.8 13.8 15.7 17.7 19.7<br>1000<br>100<br>10<br>1<br>0 50 100 150 200 250 300 350 400 450 500<br>Distance [mm]<br>Excess Gain<br>**----- End of picture text -----**<br>


## **Dimensions** 

**==> picture [500 x 200] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cable version Plug version<br>Sensitivity Control 240° Operation Indicator (Yellow) Sensitivity Control 240° Operation Indicator (Yellow)<br>3 30 6.3 15 3 30 10.8 15<br>Emitter Emitter<br>M12x1 Plug<br>Optical Axis<br>20.5 8.1 Optical Axis Receiver 0.6 20.5 8.1 Power and Stability  Receiver 0.6<br>39.3 Power and Stability  43.8 Indicator (Green)<br>Indicator (Green)<br>Ø 9.9<br>Ø 4.5<br>3.5 3.5<br>3.5 3.5<br>M18 x 1 M18 x 1<br>**----- End of picture text -----**<br>


Specifications are subject to change without notice (15.06.2017) 

**3** 

**PA18CAD04...WS** 

## **Mountin S stems g y** 

**==> picture [102 x 114] intentionally omitted <==**

**----- Start of picture text -----**<br>
Jx \<br>M18 Locknut<br>APA18-MB1<br>Min. 1.0 mmMax. 4.5 mm<br>**----- End of picture text -----**<br>


PA18 mounting with a combination of 1 x APA18-MB1 and 1 x M18 locknut. Maximum torque 0.9 NM 

PA18 mounting with a combination of 2 x M18 locknuts. Maximum torque 2.0 NM 

## **Installation Hints** 

**==> picture [445 x 114] intentionally omitted <==**

**----- Start of picture text -----**<br>
To avoid interference from inductive voltage / Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier<br>current peaks, separate the proximity switch<br>cables from any other power cables. E.g.<br>Engine, contactor or solenoid cables<br>Incorrect Incorrect<br>Incorrect<br>Correct Correct<br>> 100 mm<br>A proximity switch should not serve Any repetitive flexing of the<br>The cable should not be pulled as mechanical stop cable should be avoided<br>**----- End of picture text -----**<br>


## **Deliver Contents y** 

- Photoelectric switch: PA 18 CAD04...WS 

## **Accessories** 

   - Connector type CONG1A.. / CONB14NF.. series 

- Installation instruction on plastic bag 

- Screwdriver 

- Mounting bracket APA18-MB1 

- 2 M18 locknuts 

- **Packaging:** Plastic bag 

Specifications are subject to change without notice (15.06.2017) 

**4**