Image not available
Illustrative purposes only
P7LF-D
Relay Accessory, Track Mounting Adapter, G7L Series General Purpose Relay
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: OMRON ELECTRONIC COMPONENTS
- Product type: Other Relay Accessories
- Accessory Type:Track Mounting Adapter; For Use With:G7L Series General Purpose Relay; Product Range:G7L Series; Available until stocks are exhausted
- SVHC: No SVHC (17-Dec-2014)
- For Use With: G7L Series General Purpose Relay
- Product Range: -
- Accessory Type: Track Mounting Adapter
| Delivery and price | |
|---|---|
| Units per pack | 1 |
| Price | 6.59 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
CSM_common_sockets_DS_E_3_5 ## **Products Related to Common Sockets and DIN Tracks** ## **A Wide Variety of Square and Round Sockets in Front-mounting and Back-mounting Models** - Models available with finger protection. - Hold-down Clips and Socket Bridges for PYF Sockets are also available. - New screwless models available. ## **Models Used with Common Sockets** ## **Sockets** |**Sockets**|**Sockets**|**Sockets**||||| |---|---|---|---|---|---|---| |**Item**<br>**Model**<br>**Num-**<br>**ber of**<br>**pins**<br>**Applicable Sockets**<br>**Group name**<br>**Front-mount-**<br>**ing**<br>**Back-**<br>**mount-**<br>**ing**<br>**Proximi-**<br>**ty Sen-**<br>**sors**<br>**E2C**<br>E2C-AM4A<br>8<br>P2CF-08<br>P3G<br>E2C-AK4A<br>11<br>P2CF-11<br>P3GA<br>E2C-GE4A<br>E2C-GF4A<br>8<br>PYF08A<br>PY<br>61F-GP-N8<br>61F-APN2<br>PF083A<br>~~an~~<br>~~SS~~||||**Item**<br>**Model**<br>**Number**<br>**of pins**<br>**Applicable Sockets**<br>**Group name**<br>**Front-**<br>**mounting**<br>**MM**<br>MM2(X)P<br>8<br>8PFA<br>MM3P<br>MM2(X)KP<br>11<br>PFA<br>MM3XP<br>MM3(X)KP<br>MM4(X)P<br>MM4(X)KP<br>14<br>~~_ |~~<br>~~PT~~||**Applicable Sockets**<br>**Back-**<br>**mounting**<br>PL| |**Level**<br>**Devices**<br>**General-**<br>**purpose**<br>**Relays**<br>**and Solid-**<br>**state Re-**<br>**lays**|**61F**<br>8<br>61F-UHS<br>8PFA1<br>61F-HSL<br>8PFA<br>61F-03B, -04B<br>61F-GP-N<br>61F-GPN-V50<br>61F-GPN-BT/BC<br>11<br>PF113A<br>61F-IP<br>61F-G1P, -G2P<br>14<br>14PFA<br>**K7L**<br>K7L-AT50/AT50D<br>K7L-U/-UD<br>8<br>P2RF-08(-E)<br>**MY**<br>**(Q, K, H)**<br>MY1, MY2<br>8<br>PYF<br>MY3<br>11<br>MY4, MYQ4<br>MY4Z-CBG<br>MY2K, MY4H<br>14<br>**LY**<br>LY1, LY2<br>8<br>PTF<br>LY3<br>11<br>LY4<br>14<br>**G7K**<br>G7K-412S<br>**G2A(K)**<br>G2A,<br>G2A-434<br>G2AK<br>14<br>PYF<br>**MK(K)**<br>MK2P<br>8<br>PF083A(-E)<br>MK3P<br>MK2KP<br>11<br>PF113A(-E)<br>~~es ee~~<br>~~Pf |~~<br>~~ee ~~~~**e**ee~~<br>~~ee~~<br>~~e~~<br>~~—~~<br>~~oo~~<br>~~pf~~<br>~~oo~~<br>~~eee~~<br>~~a~~<br>~~eee ee~~<br>~~ee eee~~|PL<br>---<br>PY<br>PT<br>---<br>PY<br>PL||**General-**<br>**purpose**<br>**Relays and**<br>**Solid-state**<br>**Relays**<br>**Timers**|**G4Q**<br>---<br>8<br>8PFA1<br>**G3F**<br>G3F(D) Series<br>G3FM<br>8<br>PYF<br>**G3H**<br>G3H(D) Series<br>PTF<br>**G3B**<br>G3B(D) Series<br>PF083A<br>**G9H**<br>G9H-2@@S<br>PTF<br>**G2R**<br>G2R-1-S@<br>5<br>P2RF-05@<br>G2R-2-S@<br>8<br>P2RF-08@<br>**G3R**<br>---<br>5<br>P2RF-05@<br>**G7T**<br>**G3TA**<br>G7T<br>G3TA<br>5<br>P7TF-05<br>**G7S**<br>G7S-4A2B-E<br>G7S-3A3B-E<br>14<br>P7S-14F-END<br>**G7SA**<br>G7SA-3A1B<br>G7SA-2A2B<br>10<br>P7SA-10F<br>P7SA-10F-ND<br>G7SA-5A1B<br>G7SA-4A2B<br>G7SA-3A3B<br>14<br>P7SA-14F<br>P7SA-14F-ND<br>**H3CA**<br>H3CA-8(H)<br>8<br>P2CF<br>H3CA-A<br>11<br>**H5CN**<br>H5CN-@M<br>11<br>Other H5CN<br>models<br>8<br>~~Fff~~l ~~CE~~<br>~~OE~~<br>~~—————~~<br>~~Ss~~<br>~~ee~~<br>~~ee~~<br>~~——_—}—~~<br>~~ee~~<br>~~ee~~<br>~~po~~<br>~~TT~~<br>~~_}-~~<br>~~——~~<br>~~fT~~|PL<br>PY<br>PT<br>PL<br>PT<br>P2R<br> -05@<br>P2R<br> -08@<br>P2R<br> -05@<br>---<br>P7S<br>-14P-E<br>P7SA<br>@-10P<br>P7SA<br>@-14P<br>P3G<br>PL<br>P3GA<br>PL<br>P3GA<br>P3G| ||||||**H5CX**<br>H5CX-L8@<br>8<br>H5CX-A11@<br>11<br>~~———~~<br>~~4~~|P3G<br>P3GA| ||||||**H5CZ**<br>H5CZ-L8@<br>8<br>~~EE~~|P3G| **1** omrRon ~~a~~ **Products Related to Common Sockets and DIN Tracks** ## **Hold-down Clips** ||**Item**|**Model**|**Num-**<br>**ber of**<br>**pins**|**Applicable Sockets**|**Applicable Sockets**||**Hold-down Clips**<br>**For Square Sockets**|**Hold-down Clips**<br>**For Square Sockets**|**Hold-down Clips**<br>**For Square Sockets**|||| |---|---|---|---|---|---|---|---|---|---|---|---|---| |**Group n**|**ame**|||**Front-mount-**<br>**ing**|**Back-**<br>**mount-**<br>**ing**|||||||| ||||||||**Sockets**|**PYF**@**A**<br>**PTF**@**A**||**PYF08M**|**PY**@**(QN)**<br>**PT**@**(QN)**|**PY**@**-02**<br>**PT**@**-0**| |**Timers**|**H3CR**|H3CR-A8@<br>H3CR-F8@<br>H3CR-G8@<br>H3CR-H8@|8|P2CF|P3G<br>PL||**Applicable models**|||||| ||||||||**MY**@**, MY**@**N,**<br>**MY**@**-D, MY2**@**-CR,**<br>**MY4**@**-CR,**<br>**MY4Z**@**-CR,**<br>**MY**@**-TU, MY2K,**<br>**MY**@**N-D2, LY**@**,**<br>**LY**@**N, LY**@**-TU,**<br>**MYQ**@**,**<br>**G3H(D) Series,**<br>**G3F(D) Series,**<br>**G3FM, and G9H**|PYC-A1||PYC<br>PYC-P|PYC-P<br>PYC-S|PYC-P| |||H3CR-A<br>H3CR-AS<br>H3CR-AP<br>H3CR-F<br>H3CR-FN<br>H3CR-HRL|11||P3GA<br>PL|||||||| ||**H3M**|---|8|PF085A|P3G<br>PL|||||||| ||||||||**MY**@**I***<br>**LY**@**I**|||---|PYC-P2|| ||**H3Y**|H3Y-2|8|PYF|PY|||||||| |||H3Y-4|14||||**MY4H**|||---|PYC-P|| ||**H3YN**|H3YN-2@|8||||**MY2Z**@**-CR**<br>**MY3**@**-CR**<br>**LY**@**-CR**|Y92H-3||---|PYC-1|| |||H3YN-4@|14|||||||||| ||**H3RN**|H3RN-1@|5|P2RF-@-E|P2R<br>@-@7P|||||||| ||||||||**G2A(K) Series**|PYC-A2||---|PYC-2<br>PYC-3<br>PYC-5|PYC-3<br>PYC-5| |||H3RN-2@|8|||||||||| ||**RD2P**|---|8|8PFA1|PL|||||||| ||**H2C**|---|8|P2CF<br>PF085A|P3G<br>PL||**G7K**|PKC||---||| ||||||||**H3Y**|Y92H-3||---|Y92H-4|| |**Counters**|**H7CX**|H7CX-A11@|11|P2CF|P3GA|||||||| ||||||||**Note:**The@in the model number is replaced with 08, 11, or 14.<br>*If you use a Hold-down Clip with the MY2I, you cannot use the<br>PYF08A.<br>Use the PYF14A.<br>**For Round Sockets**|||||| ||**H7CZ**|H7CZ-L8@|8||P3G|||||||| ||**H7CN**|H7CN-@M|11||P3GA|||||||| |||Other H7CN<br>models|8||P3G|||||||| |**Tem-**<br>**pera-**<br>**ture**<br>**Control-**<br>**lers**|**E5CC**|E5CC-@U|11||P3GA|||||||| ||**E5C2**|---|8||P3G||**Sockets**||**PF083A**<br>**PF113A**|**PL08 (-Q)**<br>**PL11 (-Q)**|**PLE08-0**<br>**PLE11-0**|**P2CF-11**| ||**E5CS**|E5CS-@1,@2|11||P3GA||**Applicable models**|||||| |||Other E5CS<br>models|8||P3G||**61F-03B, -04B**||PFC-A1|PLC|PLC-10|---| ||||||||**61F-GP-N,**<br>**-GPN-BT**<br>**61F-GP-N8**<br>**?61F-APN2**||PFC-N8|PHC-5||| ||**E5L**|---|14|PTF14A|---|||||||| |**Signal**<br>**Con-**<br>**verters**|**K3FK**|K3FK models not<br>listed below|8|8PFA (Included<br>with Converter)|---|||||||| ||||||||**MK2P Series,**<br>**MK2KP,**<br>**MK3P**@**(-US), and**<br>**G3B(D) Series**||PFC-A1|PLC||| |||K3FK-G@<br>K3FK-GS@<br>K3FK-SL-?5-@|11|11PFA<br>(Included with<br>Converter)||||||||| |**Compo-**<br>**nent**<br>**Protec-**<br>**tive**<br>**Compo-**<br>**nents**|**SE**|SE-KP@N|8|8PFA1|---||**MK3ZP**<br>**MK3LP**|||PLC-1||| ||**SAO**|SAO-@||||||||||| ||**APR**|APR-S||PF083A|PL08||**MYA-NA1, -NB1**<br>**MYA-LA1, -LB1**<br>**MYA-NA2, -NB2**<br>**MYA-LA2, -LB2**||PFC-A6|PLC-7|---|---| |||APR-S380/-S440|11|P2CF-11|PL11|||||||| ||**K2CU**|K2CU-P|8|8PFA1|---|||||||| ||**SDV**|SDV-F@@/-FH@T|||PL08||**MYA-LA12, -LB12**||PFC-A7|PLC-8|---|---| |||SDV-D@@|14|14PFA|PL15||**APR-S**||PFC-A6|PLC-7|---|---| ||**LG2**|LG2-@|8|PF083A|PL08||**APR-S380/-S440**||---|---|---|Y92H-1| ||**K6EL**|K6EL-@|11|P2CF-11|PL11 and<br>P3GA-11||**LG2**||PFC-A7|PLC-8|---|---| ||||||||**K6EL**||---|Y92H-1|---|---| |**Prod-**<br>**ucts for**<br>**High-**<br>**voltage**<br>**Power**<br>**Receiv-**<br>**ing**<br>**Equip-**<br>**ment**|**AGF**|AGF-1-P5|8|8PFA1|---|||||||| ||||||||**Note: 1.** The 8PFA(1), 11PFA, and 14PFA are held with hooks.<br>**2.** The PL15, PL20, and PF202, as well as models not given in<br>the above table, require panel processing for installation.<br>**3.** The PF085A Hold-down Clip is included with the H3M and<br>H2A. It is an option (sold separately) for the H2C.|||||| |**Annun-**<br>**ciators**|**MYA**|MYA-NA1, -NB1|8|PF083A|PL|||||||| |||MYA-NA2, -NB2<br>MYA-LA1, -LB1<br>MYA-LA2, -LB2<br>MYA-LA12, -LB12|11|PF113A||||||||| - **Note: 1.** The 8PFA(1), 11PFA, and 14PFA are held with hooks. **2.** The PL15, PL20, and PF202, as well as models not given in the above table, require panel processing for installation. **2** **Products Related to Common Sockets and DIN Tracks** **Ordering Information** ## **Square Sockets** |**Model**|**P2RF (front-mounting), page 9**|**P2R (back-mounting), pages 11 and 12**<br>**Solder terminals**<br>**PCB terminals**|**P2R (back-mounting), pages 11 and 12**<br>**Solder terminals**<br>**PCB terminals**|**P2R (back-mounting), pages 11 and 12**<br>**Solder terminals**<br>**PCB terminals**|**P7TF (front-**<br>**mounting), page 12**| |---|---|---|---|---|---| |**Number of pins**|||**PCB terminals**||| |**5 pins**|**P2RF-05**<br>Approx. 27 g<br>**P2RF-05-E***<br>Approx. 38 g<br>**P2RF-0**<br>Approx.|**5-S**<br>36 g<br>**P2R-05A**<br>Approx. 5 g|**P2R-05P**<br>Approx. 5 g|**P2R-057P**<br>Approx. 5.5 g|**P7TF-05**<br>Approx. 28 g| ||||||| |**8 pins**|**P2RF-08**<br>Approx. 33 g<br>**P2RF-08-E***<br>Approx. 38 g<br>**P2RF-0**<br>Approx.|**8-S**<br>40 g<br>**P2R-08A**<br>Approx. 5 g|**P2R-08P**<br>Approx. 5 g|**P2R-087P**<br>Approx. 5.5 g|**---**| ||||||| **Note: 1.** The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. **2.** To remove the Relay, pull the lever on the Socket with your fingers supporting the lever and the opposite side of the Relay case, and jiggle the Relay. - Use a #1 Phillips screwdriver to tighten the screws on this Socket. **Minimum Order Lot** The following models are available at the minimum order lot specified below. |**Number of pins**<br>**Model**|**Number of pins**<br>**Model**|**P2RF**|**P2R**|**P2R**|**P7TF**|**P7TF**|**Minimum order lot (pcs)**|**Minimum order lot (pcs)**| |---|---|---|---|---|---|---|---|---| |**5 pins**||P2RF-05|P2R-05A<br>P|2R-05P|P7TF-05||10|| |**8 pins**||P2RF-08|P2R-08A<br>P|2R-08P|---|||| |||||||||| |**Model**|**PYF (front-mounting), page**||**14**<br>**PY (back-mounting), page 15**<br>**Solder terminals**<br>**Wrapping terminals**<br>**PCB terminals**|||||| |**Number**<br>**of pins**||||||**Wrapping terminals**||**PCB terminals**| |**8 pins**||||||||| ||**PYF08A**<br>Approx. 32 g<br>**PYF08A-E*1**<br>**PYF08M**<br>Approx. 26 g<br>**PYF08S**<br>Approx. 46 g||<br> <br>**PY08**<br>Approx. 8 g<br>**PY08-Y1**<br>**PY08-Y3**|||**PY08QN**<br>Approx. 12 g<br>**PY08QN2**<br>**PY08QN-Y1**<br>**PY08QN2-Y1**||**PY08-02** ***2**<br>Approx. 7.2 g| |**11 pins**|||**PY11**<br>Approx. 9 g|1<br>**PY11-Y1**||?<br>**PY11QN**<br>**PY11QN2**<br>**PY11QN-Y1**<br>**PY11QN2-Y1**||| ||**PYF11A**<br>Approx. 43 g|||||||**PY11-02** ***2**| |**14 pins**||||||||| ||**PYF14A-E*1**<br>**PYF14A**<br>Approx. 49 g<br>**PYF14T**<br>Approx. 53 g<br>**PYF14S**<br>Approx. 62 g||**PY14**<br>Approx. 10 g<br>**PY14-Y1**<br>**PY14-Y3**|||**PY14QN**<br>Approx. 14 g<br>**PY14QN2**<br>**PY14QN-Y1**<br>**PY14QN2-Y1**<br>**PY14QN-Y3**<br>**PY14QN2-Y3**||**PY14-02** ***2**| **3** **Products Related to Common Sockets and DIN Tracks** **Note: 1.** The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. **2.** Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards. - *1. Use a #1 Phillips screwdriver to tighten the screws on this Socket. - *2. The structure does not resist flux. Manual soldering is recommended for this product. **==> picture [511 x 209] intentionally omitted <==** **----- Start of picture text -----**<br> Model PT (back-mounting), page 18<br>PTF (front-mounting), page 17<br>Number<br>Solder terminals Wrapping terminals PCB terminals<br>of pins<br>PTF08A Approx. 47 g PTF08A-E [*1] PT08 Approx. 11 g PT08QN PT08-0 [*2]<br>Approx. 10.4 g Approx. 8 g<br>8 pins<br>PTF11A Approx. 61 g PT11 Approx. 13 g PT11QN PT11-0 [*2]<br>Approx. 12.2 g<br>11 pins<br>PTF14A Approx. 77 g PTF14A-E [*1] PT14 Approx. 17 g PT14QN PT14-0 [*2]<br>Approx. Approx. 16.2 g<br>20 g<br>14 pins<br>**----- End of picture text -----**<br> **Note:** The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. - Use a #1 Phillips screwdriver to tighten the screws on this Socket. - The structure does not resist flux. Manual soldering is recommended for this product. ## **Minimum Order Lot The following models are available at the minimum order lot specified below.** |**Number of pins**<br>**Model**|**PYF**|**PY**|**PTF**|**PT**|**Minimum order lot (pcs)**| |---|---|---|---|---|---| |**8 pins**|PYF08A<br>PYF08M|PY08|PTF08A|PT08|10| |**11 pins**|PYF11A|PY11|PTF11A|PT11|| |**14 pins**|PYF14A|PY14|PTF14A|PT14|| **==> picture [511 x 234] intentionally omitted <==** **----- Start of picture text -----**<br> Model Model P7S/P7SA, pages 20 and 21<br>Number P7LF (front-mounting), page 20<br>of pins Number Front-mounting PCB terminals<br>of pins<br> P7LF-06 Approx. 60 g<br>P7SA-10F Approx. 44 g P7SA-10P Approx. 9 g<br>P7SA-10F-ND Approx. 44 g<br>6 pins 10 pins<br>P7S-14F-END Approx. 110 g P7S-14P-E Approx. 25 g<br>14 pins<br>P7SA-14F Approx. 59 g P7SA-14P Approx. 10 g<br>P7SA-14F-ND Approx. 59 g<br>**----- End of picture text -----**<br> **Note:** Refer to _Models with Standards Certification_ for detailed information on the models of Common Sockets that are certified for standards. **4** **Products Related to Common Sockets and DIN Tracks** ## **Round Sockets** |**Model**|**PF (front-mounting),**<br>**page 22**|**P2CF (front-mounting),**<br>**page 23**|**P2CF (front-mounting),**<br>**page 23**|**PFA (front-mounting),**<br>**page 24**|**P3G (back-mounting),**<br>**page 25**|**PL (back-mounting), page 26**|**PL (back-mounting), page 26**|**PL (back-mounting), page 26**| |---|---|---|---|---|---|---|---|---| |**Number**<br>**of pins**||||||**Solder**<br>**terminals**|**Wrapping**<br>**terminals**|**PCB**<br>**terminals**| |**8 pins**||||||||| ||**PF083A**<br>Approx. 34 g<br>**PF083A-E***<br>**PF085A**<br>Approx. 40 g|**P2CF-08**<br>Approx. 55 g<br>**P2CF-08-E**||**8PFA**<br>Approx.<br>57 g<br>**8PFA1**<br>Approx.<br>66 g|**P3G-08**<br>Approx. 40g<br>**Note:** The Y92A-48G<br>Terminal Cover<br>can be used to<br>provide finger<br>protection.|**PL08**<br>Approx. 14 g|**PL08-Q**<br>Approx. 15 g|**PLE08-0**<br>Approx.<br>10.6g| |||||||||| |**11 pins**||||||||| ||**PF113A**<br>Approx.<br>47 g<br>**PF113A-E***|**P2CF-11**<br>Approx.<br>70g<br>**P2CF-11-E**||**11PFA**<br>Approx. 74 g|**P3GA-11**<br>Approx.<br>47 g<br>**Note:** The Y92A-48G<br>Terminal Cover<br>can be used to<br>provide finger<br>protection.|**PL11**<br>Approx. 15 g|**PL11-Q**<br>Approx.<br>18.5A|**PLE11-0**<br>Approx.<br>10.8 g| |||||||||| |**14 pins**|---|---|||||---|---| |||||**14PFA**Approx. 104 g|---|**PL15**<br>Approx. 28 g||| |**20 pins**|---|---||---|---||---|---| |||||||**PL20**<br>Approx. 17 g||| **Note:** The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. * Use a #1 Phillips screwdriver to tighten the screws on this Socket. ## **Minimum Order Lot** The following models are available at the minimum order lot specified below. |**Number of**<br>**pins**<br>**Model**|**PF**|**P2CF**|**PFA**|**P3G**|**PL**| |---|---|---|---|---|---| |**8 pins**|PF083A, PF085A<br>P|2CF-08, P2CF-08-E|8PFA. 8PFA1|P3G-08|PL08| |**11 pins**|PF113A<br>P|2CF-11,P2CF-11-E|11PFA|P3GA-11|PL11| |**14 pins**|---|---|14PFA|---|PL15| |**Minimum order lot**<br>**(pcs)**|20|10|20|10|| ## **Terminal Cover** |**Model**|**Y92A-48G**| |---|---| |**Appearance**|| **Note:** Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards. **5** **Products Related to Common Sockets and DIN Tracks** ## **Hold-down Clips For Square Sockets** ## **(Unit: mm)** **==> picture [511 x 354] intentionally omitted <==** **----- Start of picture text -----**<br> PKC One Set (2 Clips) PTC-1 PYC-A1 Approx. 0.54 g PYC-A2 PYC-E1 PYC-P Approx. 1.4 g<br>4.5 5 One Set (2 Clips) One Set (2 Clips) One Set (2 Clips)<br>3<br>5 max.<br>3.3 5 max. 5 max.<br>10 5<br>7° 29 29 max . Approx. 3<br>71.8 36.3 42.8 36.3<br>2.7 2.7 38.5<br>36.3 [40.7]<br>4.5<br>3 4.5 1 4.5 1.2 4.5 4.5 1.2 4.5 ±0.1 5.8 1.2 4.3<br>2.5 9.6<br>PYC-P2 Approx. 1.2 g PYC-S Approx. 1.8 g PYC-1 Approx. 6 g PYC-2 PYC-3 PYC-5<br>9.4<br>10 8 8 5 10<br>28<br>28 28 28.8 Approx. 3 29.5<br>3.7<br>2.5<br>52 58.2 44.5 41.7<br>PYC Approx. 0.2 g Y92H-1 Y92H-3 Y92H-4<br>One Set (2 Clips) 5 max. R9<br>10 6 3 5<br>3.5 30.5<br>24.5 2.5<br>3.7<br>53<br>1.5 72.9 20 (84°)<br>34.5<br>1.5<br>34.7<br>23.5<br>6 33.7<br>6 10 2 4.5 1.2 4.5<br>**----- End of picture text -----**<br> ## **For Round Sockets** **==> picture [511 x 300] intentionally omitted <==** **----- Start of picture text -----**<br> PFC-A1 Approx. 2.2 g PFC-A6 Approx. 2.4 g PFC-A7 Approx. 3.0 g PLC Approx. 2.4 g PLC-1 Approx. 2.6 g PLC-7 Approx. 3.0 g<br>One Set (2 Clips) One Set (2 Clips) One Set (2 Clips) One Set (2 Clips) One Set (2 Clips) One Set (2 Clips)<br>4.6 4.6<br>4.6<br>60.8 62 73.3 74.5 94 95.2 56.6 56.3 69.2 65.7<br>7.6 8 8<br>6 4.5<br>6 4.5 9<br>6 4.5<br>PLC-8 Approx. 6.4 g PLC-10 Approx. 2.0 g PLC-12 Approx. 5.4 g<br>One Set (2 Clips) One Set (2 Clips) One Set (2 Clips) Minimum Order Lot<br>5 The following models are available at the<br>minimum order lot specified below.<br>Minimum<br>Type Model order lot<br>90.2 86.7 64.3 (pcs)<br>66.2 PYC-A1<br>100<br>PYC-P<br>PYC-A2<br>For Square PYC-S<br>8 8 Sockets PYC-1 10<br>9 6 PYC-2<br>PYC-3<br>PYC-5<br>PFC-A1<br>For Round PFC-A6<br>20<br>Sockets PFC-A7<br>PLC<br>**----- End of picture text -----**<br> **6** **Products Related to Common Sockets and DIN Tracks** ## **Specifications** ## **Socket Characteristics** |**Model**|**Continuous**<br>**carry current**|**Dielectric strength**|**Insulation**<br>**resistance*1**|**Remarks**| |---|---|---|---|---| |P2RF-05(-E)(-S)|10 A|Between contact terminals of same polarity: 1,000 VAC for 1 min|1,000 MΩmin.|| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2RF-08(-E)(-S)|5 A|Between contact terminals of different polarity: 3,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of same polarity: 1,000 VAC for 1 min||| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2R-05P|10 A|Between contact terminals of same polarity: 1,000 VAC for 1 min|1,000 MΩmin.|| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2R-08P|5 A|Between contact terminals of different polarity: 3,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of same polarity: 1,000 VAC for 1 min||| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2R-057P|10 A|Between contact terminals of same polarity: 1,000 VAC for 1 min|1,000 MΩmin.|| |||Between coil and contact terminals: 5,000 VAC for 1 min||| |P2R-087P|5 A|Between contact terminals of different polarity: 3,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of same polarity: 1,000 VAC for 1 min||| |||Between coil and contact terminals: 5,000 VAC for 1 min||| |P2R-05A|10 A|Between contact terminals of same polarity: 1,000 VAC for 1 min|1,000 MΩmin.|| |||Between ground terminals: 1,500 VAC for 1 min||| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P2R-08A|5 A|Between contact terminals of different polarity: 3,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of same polarity: 1,000 VAC for 1 min||| |||Between ground terminals: 1,500 VAC for 1 min||| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |P7TF-05|5 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |PYF08A(-E)(-S)|7 A, -S models:<br>10 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|The continuous carry current of 10<br>A for the PYF08S is for an<br>ambient temperature of 55°C.<br>At an ambient temperature of<br>70°C, the value is 7 A.| |PYF11A|5 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |PYF14A(-E)(-S)|3 A, -S models:<br>5 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |PY08(-Y1)|7 A|Between terminals: 1,500 VAC for 1 min|1,000 MΩmin.|| |PY08QN(-Y1)|7 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY08-02|7 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY11(-Y1)|5 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY11QN(-Y1)|5 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY11-02|5 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY14(-Y1)|3 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY14QN(-Y1)|3 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PY14-02|3 A|Between terminals: 1,500 VAC for 1 min|100 MΩmin.|| |PTF@@A(-E)|10 A|Between terminals: 2,000 VAC for 1 min|100 MΩmin.|| |PT@@|10 A|Between terminals: 2,000 VAC for 1 min|100 MΩmin.|| |PT@@QN|10 A|Between terminals: 2,000 VAC for 1 min|100 MΩmin.|| |PT@@-0|10 A|Between terminals: 2,000 VAC for 1 min|100 MΩmin.|| |P7LF-06|30 A|Between contact terminals of different polarity: 2,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of same polarity: 2,000 VAC for 1 min||| |||Between coil and contact terminals: 4,000 VAC for 1 min||| |PF@@@A|5 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |P2CF|5 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |P3G(A)|6 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |8PFA(1)|10 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |11PFA(1)|10 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |PL@(-Q)|10 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |PLE@@-0|10 A|Between terminals: 2,000 VAC for 1 min|1,000 MΩmin.|| |P6D-04P|5 A|Between contact terminals of same polarity: 1,000 VAC for 1 min|100 MΩmin.|| |||Between coil and contact terminals: 3,000 VAC for 1 min||| |P7S-14@-E(ND)|10 A|Between contact terminals of different polarity: 2,000 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of same polarity: 1,500 VAC for 1 min||| |||Between coil and contact terminals: 2,000 VAC for 1 min||| **7** **Products Related to Common Sockets and DIN Tracks** |**Model**|**Continuous**<br>**carry current**|**Dielectric strength**|**Insulation**<br>**resistance*1**|**Remarks**| |---|---|---|---|---| |P7SA-10@|6 A*2|Between contact terminals of different polarity: 2,500 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of same polarity: 1,500 VAC for 1 min||| |||Between coil and contact terminals: 2,500 VAC for 1 min||| |P7SA-14@|6 A*2|Between contact terminals of different polarity: 2,500 VAC for 1 min|1,000 MΩmin.|| |||Between contact terminals of same polarity: 1,500 VAC for 1 min||| |||Between coil and contact terminals: 2,500 VAC for 1 min||| *1. The insulation resistance was measured with a 500-VDC insulation resistance meter at the same places as those used for measuring the dielectric strength. - *2. There are restrictions in the current. Refer to the _General Catalog for the OMRON Safety Components_ (Cat. No. Y106) for details. ## **Safety Precautions** **Refer to** _**Common Relay Precautions**_ **for general precautions.** **8** **Products Related to Common Sockets and DIN Tracks** **Dimensions** ## **P2RF** ## **(Unit: mm)** **==> picture [511 x 690] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P2RF-05 7± [0.2] 2<br> (One Pole) 5-M3.5×8 4.2-dia. hole<br>4 dia.<br>9.5<br>4<br>71.5 max . 35.5 3 30 [±0.05]<br>4<br>M3 (M3 x 16)<br>2 or 3.2-dia. hole<br>5 1<br>4 19.5<br>19.5 max. 3 0 max . (Top View)<br>5 4 max .<br>(Top View) Note: Track mounting is also possible.<br>Refer to page 27.<br>P2RF-05-E (One Pole)<br>(Finger Protection Structure) 7 [±0.2]<br>3.2-dia. hole<br>59 max. 4 (11) 7<br>(80.9 max.)* 2 (12) 2<br>5-M3.5×7 4 8 max . 3 (14)<br>39.5 [±0.1]<br>3.5-dia. hole 39.5 4<br>5<br>85.5 max. 35.5 (A1)(A2) 1 M3 or 3.5-dia. hole<br>(Top View)<br>Note: Figures in parentheses (Top View)<br>indicate DIN standard<br>*When mounted numbers. Note: Track mounting is also possible.<br>4 16 11.5 on H3RN-1@. Refer to page 27.<br>61 max.<br>P2RF-05-S (One Pole)<br>(Screwless Model) 4<br>(11)<br>32.6<br>3<br>18.0 max. 27.622.6 (14)<br>2<br>(12)<br>24.5<br>---<br>35.3<br>91.8 max.<br>(A1) (A2)<br>5 1<br>(Top View)<br>Note: Figures in parentheses<br>(2.4) 28.5 (5.3) indicate DIN standard numbers.<br>32.6<br>P2RF-08 7 [±0.2] 2<br> (Two Poles) 8-M3.5×8 4.2-dia. hole<br>4 dia. 9.5<br>6 3 30 [±0.05]<br>71.5 max . 35.5 5 4 4<br>M3 (M3 x 16)<br>or 3.2-dia. hole<br>7 2<br>4 19.5 max. 3 0 max19.5 . 8 1 (Top View)<br>5 4 max .<br>(Top View) Note: Track mounting is also possible.<br>Refer to page 27.<br>**----- End of picture text -----**<br> **9** **Products Related to Common Sockets and DIN Tracks** ## **P2RF** **(Unit: mm)** **==> picture [511 x 397] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P2RF-08-E<br>(Two Poles) 6 [+0.2] −0.1 (21) (11)<br>(Finger Protection Structure) (22) 67 32 (12) 3.2-dia. hole<br>63 max.<br>1.5 (84.9 max.) [*] 2 5 4 7<br>2 8-M3×8 4 8 max . (24) (14)<br>3 dia.<br>39.5 [±0.1]<br>3.5-dia. hole 8 (A1)<br>39.5 (A2) 1 4<br>85.5 max. 35.5 (Top View) M3 or 3.5-dia. hole<br>Note: Figures in (Top View)<br>*When mounted parentheses indicate DIN Note: Track mounting is also possible.<br>4 1 6 11.5 on H3RN-2@. standard numbers. Refer to page 27.<br>6 1 max .<br>P2RF-08-S (Two Poles) 6 3<br>(Screwless Model) (21) (11)<br>5 4<br>32.6 (24) (14)<br>18.0 max. 27.6 7 2<br>22.6 (3.4) (22) (12)<br>24.5<br>---<br>35.3<br>91.8 max. (A1) (A2)<br>8 1<br>(Top View)<br>Note: Figures in<br>parentheses<br>(2.4) 28.6 (5.3) indicate DIN<br>32.6 standard numbers.<br>**----- End of picture text -----**<br> **Note: 1.** If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. **2.** Refer to pages **28** and **30** for the features of Screwless Sockets and for precautions for correct use. **10** **Products Related to Common Sockets and DIN Tracks** ## **P2R** **(Unit: mm)** **==> picture [511 x 553] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/ PCB Dimensions<br>Internal Connections<br>P2R-05P (One Pole) 4<br>Five, 1.6-dia. holes<br>14.5 max. 7.5 3.5<br>1 3 6<br>6 4 4.5<br>35.5 max. 1.2 3.54.515 2 15<br>4<br>1 4<br>1.5 5 (5)<br>4 7 7<br>3 6.5 max . (Bottom View) (Bottom View)<br>P2R-08P (Two Poles)<br>7.5<br>14.5 max. 7.5 3.5 Eight, 1.3-dia holes<br>0.3 4 5<br>5 3 6 5<br>35.5 max. 1 2.85 20 2 7 5<br>20<br>1 8<br>1.5 (4.3)<br>7.5<br>3 6.5 max . (Bottom View) (Bottom View)<br>P2R-057P (One Pole)<br>14 max. 16.4 4 [±0.1]<br>0.7 8.7 1 10.4 3.5 1 Five, 1.6-dia. holes<br>37 max.29.6 64.515 3 4 4.5 [±0.1] 6 [±0.1]<br>4 2 15 [±0.1]<br>1 8.75<br>4 [±0.1]<br>8.7 7.4 1 (8.75)<br>5<br>7 [±0.1]<br>4 7<br>4 1 max . (Bottom View) (Bottom View)<br>P2R-087P (Two Poles)<br>14 max. 16.4<br>7.5 1 10.4 3.5 0.3 7.5 Eight, 1.3-dia holes<br>5 4 5<br>37 max.29.1 1 5 20 32 67 55<br>8.1 20<br>8.9 7.4 1 8<br>(8.1)<br>7.5<br>41 max. (Bottom View) (Bottom View)<br>**----- End of picture text -----**<br> **Note:** If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. **11** **Products Related to Common Sockets and DIN Tracks** ## **P2R** ## **(Unit: mm)** **==> picture [511 x 299] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P2R-05A (One Pole)<br>7.5 4.5<br>14.5 max.<br>1.2 0.3 3<br>4<br>6.7 2<br>35.5 max. 5 16.7<br>3.8<br>1 5<br>Five, 3 x 1.8-dia. holes<br>13.6 [±0.1]<br>6<br>(Bottom View)<br>3 6.5 max .<br>P2R-08A (Two Poles) 30.5 [+] 0 [0.2]<br>7.5<br>14.5 max. 6.5<br>1.2 0.3 4 5 (Use panel with thickness of<br>5 3 6 1.6 to 2.0 mm.)<br>5 2 7<br>35.5 max.<br>2.6 2.8 20<br>1 8<br>Eight, 3 x 1.2-dia. holes 1.5<br>7.5<br>(Bottom View)<br>3 6.5 max .<br>**----- End of picture text -----**<br> **Note:** If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is negative. ## **P7TF** ## **(Unit: mm)** **==> picture [511 x 195] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>12.5 [±0.2]<br>P7TF-05<br>M3 or M4 [*]<br>19 max.<br>7 -0 [+0.2]<br>5-M3.5×8<br>4 62 [±0.1]<br>3 2<br>71.5 max. 35.5<br>1 M3<br>5 (Top View)<br>Note: Track mounting is also possible.<br>4 9 Refer to page 27.<br>* We recommend that you use washers<br>12.5 [±0.2] 1 9.5 (Top View) if you use M3 bolts or screws.<br>5 9 max . Washers are not required with M4<br>bolts or screws.<br>**----- End of picture text -----**<br> **Note:** If an I/O SSR or Indicator Module is used, the polarity of terminal 1 is positive. **12** **Products Related to Common Sockets and DIN Tracks** ## **PYF** **==> picture [511 x 647] intentionally omitted <==** **----- Start of picture text -----**<br> (Unit: mm)<br>Terminal<br>Dimensions Arrangement/Internal Mounting Hole Dimensions<br>Connections<br>PYF08A PYF08A-E<br>Two M3 or M4<br>(Finger Protection Structure) or 4.5-dia. holes<br>Two, 4.2 × 5 −6 [+0.2] 0.1 3.4 Two, 4.2 × 5 −6 [+0.2] 0.1 3.4<br>mounting holes 8-M3×8 mounting holes 8-M3×8<br>4 1<br>8 5<br>59 [±0.3]<br>72 max. 35.4 72 max. 35.4<br>12 9<br>14 13 15 [±0.2]<br>(Top View)<br>4 4 4 (Top View)<br>6 6 Note: Track mounting is also<br>23 max. 23 max.<br>16.5 1 6.5 possible.<br>3 0 max . 3 1 max . Refer to page 27.<br>PYF08M 8-M3.5×7.5<br>3 dia.<br>7 [±0.2] 4 1 3.5-dia. hole<br>8 5<br>33.5 max.<br>12 9<br>20 [±0.1] 3.5-dia. or M3 hole<br>14 13<br>4 4.5 max . 1.5<br>18 max. (Top View)<br>3.5-dia. mounting holes<br>6.5-dia. countersinking, depth: 11.5<br>PYF08S<br>38.2 max.<br>(Screwless Model) 36.5 max.<br>12 9<br>(41) (11)<br>8 5<br>32.6 (44) (14)<br>27.6 4 1<br>23.2 max. 22.6 (3.4) (42) (12)<br>24.5 ---<br>(A2) (A1)<br>85 max. 35.4 14 13<br>(Top View)<br>Note: Figures in<br>parentheses<br>indicate DIN<br>(5) 28.6 (5.3) standard<br>32.6 numbers.<br>PYF11A Two, 4.2 × 5 −6 [+0.2] 0.1 3.4 Two M3 or M4 or 4.5-dia. holes<br>mounting holes<br>11-M3×8<br>3 2 1<br>6 5 4 59 [±0.3]<br>72 max. 35.4<br>9 8 7<br>11 10 22 [±0.2]<br>4 (Top View)<br>29.5 max. 6 (Top View) Note: Track mounting is also<br>16.5 possible.<br>3 0 max . Refer to page 27.<br>**----- End of picture text -----**<br> **13** ## **Products Related to Common Sockets and DIN Tracks** ## **PYF** **(Unit: mm)** **==> picture [511 x 542] intentionally omitted <==** **----- Start of picture text -----**<br> Terminal<br>Dimensions Arrangement/Internal Mounting Hole Dimensions<br>Connections<br>PYF14A PYF14A-E<br>Two M3 or M4<br>(Finger Protection Structure) or 4.5-dia. holes<br>Two, 4.2 × 5 mounting holes −6 [+0.2] 0.1 3.4 Two, 4.2-dia × 5 mounting holes −6 [+0.2] 0.1 3.4<br>14-M3×8 14-M3×8<br>59 [±0.3]<br>72 max. 35.4 72 max. 35.4<br>22 [±0.2]<br>(Top View)<br>4 4 4 3 2 1<br>6 6 8 7 6 5 Note: Track mounting is also<br>29.5 max. 16.5 29.5 max. 16.5 possible.<br>3 0 max . 3 1 max . Refer to page 27.<br>PYF14T 30 124 1114 1013 9 2-M4<br>23.5<br>33 max. 11.5<br>Two, 4.2-dia × 5 mounting holes 7 [±0.2] 11 (Top View)<br>59<br>70 max. 35.5<br>24.5<br>(Top View)<br>17.8 Note: Track mounting is also<br>possible.<br>4 17.4 14-M3.5×8 10 Refer to page 27.<br>PYF14S<br>3 6.5 max.<br>(Screwless Model)<br>12 11 10 9<br>(41) (31) (21) (11)<br>8 7 6 5<br>(44) (34) (24) (14)<br>32.6 4 3 2 1<br>27.6 (42) (32) (22) (12)<br>3 1 max. 22.6 (3.4)<br>24.55 ---<br>(A2) (A1)<br>85 max. 35.4 14 13<br>(Top View)<br>Note: Figures in<br>parentheses<br>indicate DIN<br>(4.15) 28.6 standard<br>32.6 numbers.<br>**----- End of picture text -----**<br> **Note:** Refer to pages **28** and **30** for the features of Screwless Sockets and for precautions for correct use. **14** **Products Related to Common Sockets and DIN Tracks** ## **Relay Sockets and Socket Bridges for PYF** ## **Bridges within the Same Socket** **==> picture [511 x 156] intentionally omitted <==** **----- Start of picture text -----**<br> Pitch Applicable models Appearance Dimensions (mm) Model Specifications<br>7<br>PYD-020B@(2P)<br>Max. carry current: 20 A (18 A at 70°C)<br>3.2 Ambient operating temperature: -40 to 70°C (with no<br>icing or condensation)<br>7 PYF14A 5.6 Ambient operating humidity: 45% to 85% (with no<br>mm icing or condensation)<br>7 7 Conductor material: Brass<br>Conductor surface treatment: Nickel plating<br>Package qty: 50/bag<br>PYD-030B@(3P)<br>3.2<br>5.6<br>**----- End of picture text -----**<br> **Note: 1.** The @ in the model number is replaced with the insulation color specification code. B: Black, Y: Yellow **2.** Specify the number of bags when ordering. ## **Bridges between Adjacent Sockets** **==> picture [511 x 282] intentionally omitted <==** **----- Start of picture text -----**<br> Pitch Applicable models Appearance Dimensions (mm) Model Specifications<br>22 40°<br>PYD-025B@(2P)<br>Max. carry current: 20 A (18 A at 70°C)<br>3.3 Ambient operating temperature: -40 to 70°C (with no<br>22 PYF08A 5.6 icing or condensation)Ambient operating humidity: 45% to 85% (with no<br>mm 154 icing or condensation)<br>22 40° Conductor material: Brass<br>Conductor surface treatment: Nickel plating<br>PYD-085B@(8P) Package qty: 10/bag<br>3.3<br>5.6<br>29 40°<br>PYD-026B@(2P)<br>Max. carry current: 20 A (18 A at 70°C)<br>3.3 Ambient operating temperature: -40 to 70°C (with no<br>29 PYF14A 5.6 icing or condensation)Ambient operating humidity: 45% to 85% (with no<br>mm 203 icing or condensation)<br>29 40° Conductor material: Brass<br>Conductor surface treatment: Nickel plating<br>PYD-086B@(8P) Package qty: 10/bag<br>3.3<br>5.6<br>**----- End of picture text -----**<br> **Note: 1.** The @ in the model number is replaced with the insulation color specification code. B: Black, S: Blue, R: Red **2.** Specify the number of bags when ordering. ## **Socket Bridges** |**Pitch**|**Applicable models**|**Appearance and dimensions (mm)**|**Model**|**Insulation color**| |---|---|---|---|---| |**19.7**<br>**mm**|**PYF08S**|9<br>Guide: 1.2 dia.<br>Insulating coating<br>14<br>Pitch|**PYDM-08SR**|Red| ||||**PYDM-08SB**|Blue| |**27.5**<br>**mm**|**PYF14S**||**PYDM-14SR**|Red| ||||**PYDM-14SB**|Blue| |**14.3**<br>**mm**|**P2RF-@@-S**||**P2RM-SR**|Red| ||||**P2RM-SB**|Blue| **Note: 1.** Use the Socket Bridges for relay coil bridge wiring. **2.** Specify the number of bags when ordering. ## **Safety Precautions** ## **Maximum Carry Current** - The total current of all bridged poles must not exceed the maximum carry current of the Socket Bridge. - Make sure that the maximum carry current of the relay contacts is also not exceeded for each pole. - If you use more than one Socket, use End Plates (PFP-M). **15** **Products Related to Common Sockets and DIN Tracks** ## **PY** **(Unit: mm)** ||**Dimensions**|||**Terminal**<br>**Arrangement/**<br>**Internal**<br>**Connections**|**Mounting hole and PCB dimensions**|**Mounting hole and PCB dimensions**|**Mounting hole and PCB dimensions**|**Mounting hole and PCB dimensions**|**Mounting hole and PCB dimensions**| |---|---|---|---|---|---|---|---|---|---| |5<br>*The PY08-Y@includ<br>the part outlined by t<br>dashed lines above.<br>**PY08**<br>**PY08-Y1 (L = 42 max.)**<br>**PY08-Y13 (L = 60 max.)**|L<br>2<br>2.7<br>*<br>Ei<br>es<br>he|0 max.<br>ght, 3 x 1.2 ellipses<br>7.7<br>24 m<br>2|ax.<br>.6<br>25.5 max.<br>29.5 max.|1<br>4<br>5<br>8<br>9<br>12<br>13<br>14<br>(Bottom View)|6<br>5<br>25.||||4.1<br>12.65<br>6.35<br>Eight, 1.3-dia holes| |||||||8±0.2|||| ||||||||13.2<br>21.4+0.2<br>0||| |5<br>*1. The PY08QN(2)-Y1 includes the par<br>outlined by the dashed lines above.<br>*2. The figures in the parentheses are fo<br>the PY08QN2(-Y1).<br>**PY08QN**<br>**PY08QN2**<br>**PY08QN-Y1**<br>**PY08QN2-Y1**|*1|~~4~~1.5 max~~.~~<br>36.5 max.)*2<br>(20)*2<br>25<br>22 m<br>24 m<br>1|ax.<br>ax.<br>29.5 max.||||||| ||~~4~~2 max~~.~~<br>(<br>2.7<br>t<br>r||||||||| |||||||.8|||| |**PY08-02**<br>* The structure does not resist flux. Manual<br>soldering is recommended for this product.|16<br>2.7|.5 max.<br>4.3<br>0.3<br>22|max.<br>25.5 max.<br>2<br>1.0<br>29.5 max.||||||| ||||||||||| |||||||.4|||| ||||||||4.2||| |5<br>*The PY11-Y1 includes<br>part outlined by the da<br>lines above.<br>**PY11**<br>**PY11-Y1**|*<br>E|20 max.<br>leven, 3 x 1.2 ellipses<br>7.7<br>24 m|ax.<br>2.6<br>25.5 max.<br>29.5 max.|2<br>1<br>3<br>5<br>4<br>6<br>8<br>7<br>9<br>10<br>11<br>(Bottom View)|6.<br>5.<br>25.8||||4.1<br>12.65<br>6.35<br>Eleven, 1.3-dia holes| ||~~4~~2 max~~.~~<br> <br>2.7<br>the<br>shed|||||±0.2|||| ||||||||13.2<br>21.46+0.2<br>0||| |5<br>*1. The PY11QN(2)-Y1 includes the<br>outlined by the dashed lines abo<br>*2. The figures in the parentheses a<br>the PY11QN2(-Y1).<br>**PY11QN**<br>**PY11QN2**<br>**PY11QN-Y1**<br>**PY11QN2-Y1**|*1|22<br>24<br>~~4~~1.5 max~~.~~<br>(36.5 max.)*2<br>(20)*2<br>25<br>1|max.<br>max.<br>29.5 max.||||||| ||~~4~~2 max~~.~~<br> <br>2.7<br>part<br>ve.<br>re for||||||||| |||||||8|||| |**PY11-02**<br>* The structure does not resist flux. Manual<br>soldering is recommended for this product.|2.7<br>16|4.3<br>0.3<br>22<br>.5 max.|max.<br>25.5 max.<br>2<br>1.0<br>29.5 max.||||||| ||||||||||| ||||||||||| |||||||4|||| ||||||||4.2||| **16** **Products Related to Common Sockets and DIN Tracks** **==> picture [511 x 283] intentionally omitted <==** **----- Start of picture text -----**<br> Terminal<br>Dimensions Arrangement/Internal Mounting hole and PCB dimensions<br>Connections<br>PY14 * Fourteen, 3 x 1.2 ellipses<br>PY14-Y1 (L = 42 max.) 25.5 max.<br>PY14-Y3 (L = 60 max. ) 5 29.5 max.<br>25.8 [±0.2]<br>*The PY14-Y@ includes 2.7 7.7 2.6<br>the part outlined by the<br>dashed lines above. L 20 max. 24 max. 21.4 0 [+0.2]<br>PY14QN 1<br>PY14QN2 *1 29.5 max.<br>PY14QN-Y1 (L = 42 max.) 5 1 2 3 4<br>PY14QN2-Y1 (L = 42 max.) 2.7 (20)25 [*][2] 22 max. 5 6 7 8<br>PY14QN-Y3 PY14QN2-Y3(L = 60 max.) (L = 60 max.) L (36.5 max.) 4 1.5 max . [*][2] 24 max. 9 10 11 12<br>*1. The PY14QN-Y@ and PY14QN2-Y@ include the part outlined 13 14 13.2<br>by the dashed lines above.<br>*2. The figures in the parentheses are for the PY14QN2(-Y@). (Bottom View) 4.4<br>5.8<br>PY14-02 1.0 4.1<br>* The structure does not resist flux. Manual soldering is recommended for this product. 0.3 25.5 max. 6.35 12.65<br>29.5 max. 6.4<br>Fourteen<br>4.2 1.3-dia. holes<br>2.7 4.3 22 max. 2<br>16.5 max.<br>**----- End of picture text -----**<br> **Note: 1.** Use a panel with a thickness of 1 to 2 mm when mounting a Socket on it. **2.** You can use the PY14-Y1 or PY14QN-Y1 for the MY4 Series, MY4H, MYQ4(Z), or MY2K. **3.** You can use the PY14-Y3 or PY14QN-Y3 for H3Y Timers. ## **PTF** ## **(Unit: mm)** **==> picture [511 x 298] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>PTF08A Two, 4.5 × 6 mounting holes 7 [±0.2] 3.4<br>8-M3.5×8<br>78.5 max. 35.4<br>Two, 4.5 dia. or<br>M4 mounting holes<br>2 1<br>8<br>28.5 max. 3 0 max . 4 3<br>PTF08A-E (Finger Protection Structure) 68 [±0.3]<br>Two, 4.5 × 6 mounting holes 8-M3.5×8 3.4 6 5<br>8 7<br>(Top View) 19 [±0.2]<br>(Top View)<br>78.5 max. 35.5<br>Note: Track mounting is also<br>possible.<br>Refer to page 27.<br>8<br>28.5 max.<br>3 3 max .<br>**----- End of picture text -----**<br> **17** **Products Related to Common Sockets and DIN Tracks** **==> picture [511 x 431] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>PTF11A Two, 4.5 × 6 mounting holes<br>Two, 4.5 × 6 7 [±0.2] 3.4<br>mounting holes<br>11-M3.5×8<br>3 2 1<br>6 5 4<br>68 [±0.3]<br>78.5 max. 35.4<br>9 8 7<br>11 10<br>27.5 [±0.2]<br>(Top View)<br>(Top View)<br>3 7 max . 8 Note: Track mounting is also possible.<br>3 0 max . Refer to page 27.<br>PTF14A Two, 4.5 × 6 mounting holes 7 [±0.2] 3.4<br>14-M3.5×8<br>78.5 max. 35.4<br>Two, 4.5 dia. or M4 mounting holes<br>4 3 2 1<br>4 5.5 max . 8 8 7 6 5<br>3 0 max .<br>PTF14A-E (Finger Protection Structure) 68 [±0.3]<br>Two, 4.5 × 6 mounting holes 7 [±0.2] 3.4 12 11 10 9<br>14-M3.5×8<br>14 13<br>(Top View) 36 [±0.2]<br>(Top View)<br>78.5 max. 35.5<br>Note: Track mounting is also possible.<br>Refer to page 27.<br>4 5.5 max . 8<br>3 3 max .<br>**----- End of picture text -----**<br> **Note:** If you use the PTF08A, PTF08A-E, or PT08 with an LY1 Relay, connect the following terminal pairs: 1-2, 3-4, and 5-6 (for usage at 10 A or higher). **PT** **(Unit: mm)** **==> picture [511 x 252] intentionally omitted <==** **----- Start of picture text -----**<br> Terminal<br>Dimensions Arrangement/Internal Mounting hole and PCB dimensions<br>Connections<br>PT08 PT08QN<br>5 1.5×1.0<br>0.3 25.5 29.5<br>1.0 max. max. 25.8 [±0.2]<br>25.5 29.5<br>max. max. 9 2.5<br>2.7 20 1.5 2<br>2.7 24 max. 2 3 5 max . 24 max. 1 2 21.4 0 [+0.2]<br>20.5 max. Eight, 1.7-dia × 3.5 oblong holes 3 4<br>PT08-0<br>5 6<br>*Maintain a sufficient distance from the<br>2 pattern when using double-sided PCBs. 7 8 1 5.6<br>• The structure does not resist flux. 1 0<br>Manual soldering is recommended for<br>0.3 this product. (Bottom View) 5.35 4.6<br>12.45<br>29.5 max. 6.45<br>2 5 [*] 6.5 6.5<br>1 4.3 3 Eight, 2.5-dia. holes<br>22 max.<br>18 max. (±0.1 tolerance)<br>**----- End of picture text -----**<br> **18** **Products Related to Common Sockets and DIN Tracks** **==> picture [511 x 519] intentionally omitted <==** **----- Start of picture text -----**<br> Terminal<br>Dimensions Arrangement/Internal Mounting hole and PCB dimensions<br>Connections<br>PT11 PT11QN<br>0.3<br>1.5×1.0<br>5<br>Eleven, 1.7-dia × 3.5 holes 1.5 30.6 32 max.<br>31 [±0.2]<br>30.6 32 max. 2.7 9 2.5 20 1.0<br>3 5 max . 1.2 26.4<br>26.6 0 [+0.3]<br>2.7 1.2 26.4 29.5 max.<br>10 7 4 1<br>20.5 max. 29.5 max.<br>8 5 2<br>PT11-0<br>*Maintain a sufficient distance from the 11 9 6 3 12.45<br>0.3 pattern when using double-sided PCBs. 6.45 4.6<br>• The structure does not resist flux. Eleven,<br>Manual soldering is recommended for 5.2 2.5-dia. holes<br>this product. (Bottom View)<br>10<br>21.4<br>2 5 [*] 32 max. 10<br>5.8<br>2.7 4.3 6.2 6.2 5.65<br>18 max. 29.5 max. (±0.1 tolerance)<br>PT14 PT14QN<br>0.3<br>1.5×1.0<br>5<br>Fourteen, 1.7-dia × 3.5 holes<br>42.5 max.<br>1.5 41 [±0.2]<br>42.5 max.<br>9 2.5<br>2.7 20 1.0<br>3 5 max .<br>26.5 max. 26.6 0 [+0.3]<br>2.7 29.5 max. 13 9 5 1<br>26.5 max.<br>20.5 max. 29.5 max. 10 6 2<br>PT14-0 *Maintain a sufficient distance from the 11 7 3 12.45 4.6<br>0.3 pattern when using double-sided PCBs. 6.45<br>• The structure does not resist flux. 14 12 8 4<br>Manual soldering is recommended for 5.1 5.8<br>this product.<br>(Bottom View) 10<br>31.4 10<br>4 2.5 max.<br>2 5 [*] 10<br>Fourteen,<br>2.5-dia. holes<br>2.7 4.3 6.4<br>6.4 5.45<br>17.5 max. 26.5 max.29.5 max. (±0.1 tolerance)<br>**----- End of picture text -----**<br> **Note:** Use a panel with a thickness of 1 to 2 mm when mounting a Socket on it. **19** **Products Related to Common Sockets and DIN Tracks** ## **P7LF** **==> picture [511 x 206] intentionally omitted <==** **----- Start of picture text -----**<br> (Unit: mm)<br>Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P7LF-06 Two, M3.5 x 6 (coil side)<br>51.5 max.<br>0 1 Two, 4.5 dia. or<br>M4 mounting holes<br>Four, M4 × 8 (contact side) 25 5<br>40 [±0.1] 4 6 max .<br>40 [±0.1]<br>5 5.5 max . 2 4 6 8<br>8 [±0.05] (Top View)<br>9.2 [±0.05]<br>**----- End of picture text -----**<br> **==> picture [511 x 435] intentionally omitted <==** **----- Start of picture text -----**<br> P7S (Unit: mm)<br>Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P7S-14F-END<br>Indicator LED<br>14-M3.0×8<br>40 max.<br>33 [±0.1]<br>41 42<br>4 43 44<br>7.5 1 33 Two, 4.0 dia.<br>24 34 or M3.5<br>23 62<br>14 61 33 [±0.1]<br>13 0 52 51<br>80 max.<br>37<br>17<br>5 3.1 5.9<br>9 0.5 max.<br>(5)<br>P7S-14P-E<br>70.5 max.<br>28 [±0.2] G7S-4A2B-E Mounted<br>23.5 max .<br>Two, 6.5 dia., depth: 8 2.8 28 [±0.2] 4.2 (21)<br>(16.9)<br>G7S-3A3B-E Mounted 14.5 8<br>57 max.<br>Fourteen, 6 7 Two,<br>2.5 dia. 5×7=35 3.6 dia.<br>13.2<br>6 7 (15) 8 4.1<br>5×7=35 16.9<br>14.5<br>23.5 max.<br>**----- End of picture text -----**<br> **20** **Products Related to Common Sockets and DIN Tracks** ## **P7SA** ## **(Unit: mm)** **==> picture [511 x 719] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P7SA-10F G7SA-3A1B G7SA-2A2B<br>P7SA-10F-ND Mounted Mounted<br>14.5 [±0.2]<br>Two, 4 dia.<br>or M3.5<br>R2 22.5 max. 60.5 max .<br>9 max. 5 10-M 3× 8 44 33 34 44 33 34<br>43 43<br>24 22 80 [±0.2]<br>72 max. 23 * 21 *<br>Indicator<br>LED 12 12<br>11 1 0 11 1 0<br>9 max. (Top View)<br>4 dia. * This display circuit is available only for "-ND" models.<br>Note: 1. The Socket is shown with the finger<br>cover removed. Note: Terminals 23-24, 33-34, and 43-44 are normally<br>2. Only the -ND Sockets have LED open. Terminals 11-12 and 21-22 are normally<br>closed.<br>indicators (orange).<br>P7SA-14F G7SA-5A1B G7SA-4A2B G7SA-3A3B<br>P7SA-14F-ND Mounted Mounted Mounted<br>22 [±0.2]<br>Two, 4 dia.<br>R2 30 max. 60.5 max. 64 54 64 54 64 54 or M3.5<br>9 max. 5 14-M3×8 63 53 63 53 63 53<br>44 34 44 34 44 32<br>* * *<br>43 33 43 33 43 31 80 [±0.2]<br>72 max.<br>24 12 22 12 22 12<br>Indicator<br>LED<br>23 1 0 11 21 1 0 11 21 1 0 11<br>9 max. * This display circuit is available only for "-ND" models.<br>Note: 1. The Socket is shown with the finger 4 dia. Note: Terminals 23-24, 33-34, 43-44, 53-54, and 63-64 are<br>cover removed. normally open. Terminals 11-12, 21-22, and 31-32 are (Top View)<br>2. Only the -ND Sockets have LED normally closed.<br>indicators (orange).<br>P7SA-10P G7SA-3A1B Mounted<br>0.5 50 max. 0.5 0 11 12 33 34<br>+<br>15 max. −<br>1 23 24 43 44 4.1 [±0.2] 24.839.9 [±0.2][±0.2] Three, 3.2 dia. (for M3 tapping screws)<br>G7SA-2A2B Mounted<br>10.16<br>41.5 max. 0 11 12 33 34<br>+ 13.97 11.43 Ten,<br>− (7.14) 1.1 dia. holes<br>5.08 5.08<br>1 21 22 43 44<br>3.5<br>(11.1) 0.4 (11.1) 0.8 (Bottom View) (Bottom View)<br>Three, 2.6 dia. (for M3 tapping screws) Note: Terminals 23-24, 33-34, and 43-44 are<br>(±0.1 tolerance)<br>normally open. Terminals 11-12 and 21-<br>4.1 24.8 22 are normally closed.<br>39.9<br>P7SA-14P G7SA-5A1B Mounted<br>0 11 12 33 34 53 54<br>0.5 60 max. 0.5<br>+<br>15 max. −<br>1 23 24 43 44 63 64<br>G7SA-4A2B Mounted<br>41.5 max. +− 0 11 12 33 34 53 54 4.1 [±0.2] 24.8 [±0.2] 49.9Fourteen, 1.1 dia. holes [±0.2] Three, 3.2 dia. (for M3 tapping screws)<br>1 21 22 43 44 63 64<br>10.16<br>G7SA-3A3B Mounted<br>13.97 11.43<br>(11.1) 0.4 (11.1) 3.5 0.8 + 0 11 12 31 32 53 54 (7.14) 5.08 5.08 5.08 5.08<br>Three, 2.6 dia. (for M3 tapping screws) − 1 21 22 43 44 63 64 (Bottom View)<br>(Bottom View)<br>4.1 24.8 Note: Terminals 23-24, 33-34, 43-44, 53-54, and 63- (±0.1 tolerance)<br>49.9 64 are normally open. Terminals 11-12, 21-22,<br>and 31-32 are normally closed.<br>**----- End of picture text -----**<br> **21** **Products Related to Common Sockets and DIN Tracks** |**PF**|||||**(Unit: mm)**|**(Unit: mm)**|**(Unit: mm)**| |---|---|---|---|---|---|---|---| ||||**Dimensions**|||**Terminal Arrangement/**<br>**Internal Connections**|**Mounting Hole Dimensions**| |**PF083A**|52<br>8-|M3.5×7|3.5<br>33<br>Two,<br>4.2 dia. ho<br>7±0.2<br>max~~.~~|les|x.<br><br>35.4<br>4|2<br>1<br>8<br>7<br>3<br>4<br>5<br>6<br>(Top View)|33±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.<br>Refer to page 27.| |||max.|||||| |||4<br>~~4~~1|||||| |||||21 ma<br><br>|||| |**PF083A-E**|4<br>52<br>8-|M3.5×7|max.<br>23<br>7±0.2<br>Two, 4.2-dia<br>mounting ho<br>8 25 di<br>3.<br>33|<br>les<br>a.<br><br>|x.<br>2<br>4<br>35.4||| |||max.|||||| |||41<br><br>|||||| |||||21 ma<br><br>|||| |**PF085A**|58|8-M3.5×7|7±0.2<br>Two,<br>4.5 dia. hol|es|4<br>35.4<br>ax.<br>2|6<br>5<br>4<br>3<br>7<br>8<br>1<br>2<br>(Top View)|| |||max.|||||| ||||||||| ||||3±0.2<br>1.<br>max~~.~~||||| |||3<br>4<br>~~4~~0|||||| |||||21.6 m<br><br>3.5|||| |**PF113A**|11-M3.5<br>4<br>52 m|22<br>×7|7±0.2<br>3.5<br>max~~.~~<br>4<br>4|~~3~~1 m<br>2<br>|4<br>ax.<br>35.4|2<br>3<br>1<br>11<br>10<br>9<br>5<br>4<br>6<br>7<br>8<br>(Top View)|34±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.<br>Refer to page 27.| |||ax.|||||| |||43<br>3<br>5|||||| |52<br>4<br>**PF113A-E**|1|1-M3.5×5|8<br>7±0.2<br>23<br>2.8|~~3~~1 m<br>5<br>3.|ax~~.~~<br>.5<br>5<br>35.4<br>4||| ||4<br>max.<br>||||||| |||.2|||||| |||5.2<br><br>4|||||| - **Note: 1.** For the PF083A and PF113A, the Socket key slot is on the top. (Applicable model: MK) **2.** The structure of @-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals. **22** **Products Related to Common Sockets and DIN Tracks** ## **P2CF** |||||||| |---|---|---|---|---|---|---| |**P2CF**||||**(Unit: mm)**||| |||**Dimensions**|||**Terminal Arrangement/**<br>**Internal Connections**|**Mounting Hole Dimensions**| |70<br>**P2CF-08**|8-M3.5×7.5|Two,<br>4.5 dia. holes<br>7.8<br>3<br>0 max.||max.<br>4.5<br>35.4|6<br>5<br>4<br>3<br>7<br>8<br>1<br>2<br>(Top View)|40±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.<br>Refer to page 27.| ||||20.3<br>|||| ||max.|||||| |||||||| ||4<br>5|||||| |70<br>**P2CF-08-E**|8-M3.5×7.5|1<br>2<br>4<br>3<br>E<br>AC<br>E<br>Two,<br>4.5 dia. holes<br>7.8<br>1.<br>3<br>0 max.<br>40±0.2|5|max.<br>0.3<br>19<br>4.5<br>35.4||| ||7<br>8<br>6<br>5<br>P2CF-08-<br>10A250V<br>RESISTIV<br>max.|4<br>3<br>E|21.5<br>2<br><br>3<br>|||| |||1<br>2<br>AC<br>E||||| ||4<br>5<br>|||||| |70<br>1<br>**P2CF-11**|1-M3.5×7.5|0 max.<br>Two,<br>4.5 dia. holes<br>7.8<br>3||2 max.<br>4.5<br>35.4|8<br>7<br>6<br>5<br>10<br>11<br>1<br>2<br>4<br>3<br>9<br>(Top View)|40±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.<br>Refer to page 27.| ||||31.|||| ||max.|||||| |||||||| ||4<br>5|||||| |70<br>1<br>**P2CF-11-E**|7<br>8<br>1-M3.5×7.5|1<br>2<br>6<br>5<br>3<br>4<br>1-E<br>AC<br>VE<br>0 max.<br>40±0.2<br>Two,<br>4.5 dia. holes<br>7.8<br>1.2<br>3<br>5||2 max~~.~~<br>30<br>4.5<br>35.4||| |||||||| ||9<br>P2CF-1<br>10A250V<br>RESISTI<br>max.|4<br>1-E||||| ||||~~3~~1.<br>|||| |||3<br>AC<br>VE||||| ||10<br>11<br>4<br>5<br>|||||| **23** **Products Related to Common Sockets and DIN Tracks** |**PFA**|||||**(Unit: mm)**|**(Unit: mm)**|**(Unit: mm)**| |---|---|---|---|---|---|---|---| |||**Dimensions**||||**Terminal Arrangement/**<br>**Internal Connections**|**Mounting Hole Dimensions**| |**8PFA**|81 max.<br>4<br>8-M3.5×7||5<br>Two,<br>4.5 dia. hole<br>7.8±0.2|s|118<br>max.<br>x.<br>35.4<br>4<br>4|6<br>5<br>4<br>3<br>7<br>8<br>1<br>2<br>(Top View)|40±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.<br>Refer to page 27.| ||||||||| ||||||||| |||||24 ma<br><br>|||| ||||||||| ||||||||| ||||||||| |||~~5~~1 max~~.~~<br>40±0.2|||||| |**8PFA1**|8-M3.5×7<br>93 max.<br>4||7.8±0.2||130<br>max.<br>35.4<br><br>4<br>x.||| ||||5<br>Two,<br>4.5 dia. holes|<br>|||| |||||24 ma|||| ||||||||| ||||||||| ||||||||| ||||||||| |||~~5~~1 max.<br>40±0.2|||||| |**11PFA**|81 max.<br>11-M3.5×7<br>4||7.8±0.2<br>Two,<br>4.5 dia. holes<br>5|<br><br>|35.4<br>4<br>4<br>118<br>max.<br>max~~.~~|8<br>7<br>6<br>5<br>10<br>11<br>1<br>2<br>9<br>4<br>3<br>(Top View)|40±0.2<br>Two M4 or 4.5-dia. holes<br>**Note:**Track mounting is also<br>possible.<br>Refer to page 27.| ||||||||| ||||||||| ||||||||| |||||~~3~~3.5|||| ||||||||| ||||||||| |||40±0.2<br>~~5~~1 max~~.~~|||||| |81<br>**14PFA**|14-M3.5×7||Two,<br>4.5 dia. h<br><br>7.8±0.2|oles<br><br>5<br>~~3~~3.5|4<br>4<br>max~~.~~<br>35.4 118<br>max.|7<br>14<br>6<br>4<br>3<br>5<br>12<br>8<br>15<br>1<br>2<br>9<br>10<br>11<br>(Top View)|60±0.2<br>Two, 4.5 dia. or M4 mounting holes<br>**Note:**Track mounting is also<br>possible.<br>Refer to page 27.| ||max.||||||| ||||||||| ||||||||| ||4|60±0.2<br>~~7~~2 max~~.~~|||||| **24** **Products Related to Common Sockets and DIN Tracks** ## **P3G/P3GA** ## **(Unit: mm)** **==> picture [511 x 231] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting Hole Dimensions<br>P3G-08 2 7 di a.<br>3 4 5 6<br>45<br>---<br>2 1 8 7<br>Eight,<br>45 4.9 17 M3.5 SEMS screws (Bottom View)<br>Note: The Y92A-48G Terminal Cover can be used to<br>implement finger protection.<br>P3GA-11 2 7 di a.<br>5 6 7 8<br>4<br>45 25.6<br>3 9 ---<br>2 1 11 10<br>Eleven,<br>45 4.5 16.3 6.2 M3.5 SEMS screws (Bottom View)<br>Note: The Y92A-48G Terminal Cover can be used to<br>implement finger protection.<br>**----- End of picture text -----**<br> ## **Terminal Cover (Unit: mm)** |**Appearance**|**Appearance**|||**Dimensions**|**Dimensions**||||||| |---|---|---|---|---|---|---|---|---|---|---|---| |||Y<br>34<br>**Y92A-48G**||92A-48G<br>UP<br>P C<br>Twelve, 6.4 dia.<br>47|.7×47.7|48×48<br>|||||| ||||||||||||| ||||||||||||| ||||||||||||| |||||47.4|27.6<br>24.6<br>16.5||||||| ||||||||||||| |**Release Lever**|||||**(Unit: mm)**||||||| |**Applicable models**|**Appearance**|||**Dimensio**|**ns**||**Model**||||| |**PYF08S**||||32.7|16<br>54.4<br>||**PYCM-08S**||||| |**PYF14S**||||29|.6<br>52.5<br>28||**PYCM-14S**||||| |**P2RF-05-S**||||40.3|16.8<br>5<br>36||**P2CM-S**||||| |**P2RF-08-S**|||||||||||| **25** **Products Related to Common Sockets and DIN Tracks** ## **PL** ## **(Unit: mm)** **==> picture [511 x 637] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting hole and PCB dimensions (bottom view)<br>Two, 3.5 dia. or M3 L = 40 mm<br>PL08 3.5 4 1 device mounting holesTwo, 3.5 or M3 MK2(Z)PL = 74 mm<br>Two, Socket mounting holes PU, AMD-S, MM2(X)P, CZ, STP, H3L,<br>2 dia. holes TDS, DTS, DSP, TDF, TDV<br>L = 86 mm<br>50.5 max.40 30 dia. 31-dia. hole 40 [±0.3] L 61F-GP/-APN, G4Q-212S, RD2P, RDA, TDA, AGF, SE, SAD, K2CU,<br>3.9 SDV-F<br>5 0.5 ma x. App20.5rox.<br>PL08-Q 3.5 4 1 4 5 Two 3.5-dia. or<br>t0.6×1.3 3 6 two M3 Socket mounting holes<br>2 7<br>51 max. 40 30 dia. 1 8 31-dia. hole MK2(Z)P<br>40 [±0.3]<br>1 6 (Bottom View)<br>3 5 max . 3 5 max .<br>PLE08-0 1 4 15 t0.3 Two 3.5-dia. Hold-down Clip mounting holes<br>45°<br>29±0.1 dia. 2 7.7±0.5 dia. 040 [+0.1] MK2(Z)P<br>21.5 max. Eight, 2.5-dia. holes<br>PL11 3.5 4 1<br>Two 2-dia.<br>holes<br>51 max. 40 30 dia. Two, 3.5 dia. or M3 device mounting<br>3.9 /Hold-down Clip mounting holes<br>L = 40 mm L = 74 mm<br>Two, 3.5 dia. or M3 MK3P MM3P<br>Socket mounting holes<br>3 5 max . Approx20.5 . MK2KP MK2(X)KP<br>31-dia. hole<br>PL11-Q 3.5 4 1 40 [±0.3] L<br>5 6 7 L = 42 mm<br>MK3ZP<br>t0.6×1.3 4 8<br>MK3LP<br>3 9<br>51 max. 2 10<br>1 11<br>1 6<br>(Bottom View)<br>3 5 max . 3 5 max .<br>PLE11-0 14 15 t0.3 360° Two, 3.5-dia. holes Applicable model/Hold-down Clip mounting holes<br>11 L = 40 mm L = 42 mm<br>MK3P MK3ZP<br>29±0.1 dia. 28.7 [±0.5] L MK2KP MK3LP<br>22 max.<br>Eleven, 2.5-dia. holes<br>PL15 4 4 1 Two, 3.5 dia. or M3<br>device mounting holes<br>MM3XP<br>Two 2-dia. holes 2 312 4 Two, 3.5 dia. or M3 Socket mounting holes MM4(X)PMM3(X)KP<br>66 max. 53 41 max. 1 11 13 5 4.2-dia. hole 74 MM4(X)KP<br>3.9 10 15 14 6<br>9 7<br>8<br>(Bottom View)<br>4 5 max .<br>22 max.<br>53<br>**----- End of picture text -----**<br> **26** **Products Related to Common Sockets and DIN Tracks** **==> picture [511 x 121] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions Terminal Arrangement/Internal Connections Mounting hole and PCB dimensions (bottom view)<br>PL20 Two, 3.5-dia. holes 4 1 Two, 4.5-dia. Relay mounting holes<br>Two, 2 dia. 17 1819 20 12 3 Two, 4-dia. Socket mounting holes<br>46.5 max. 31 max. 16 4 33-dia. hole<br>3.9 15 14 6 5 56 [±0.2]<br>13 12 10 8 7<br>11 9<br>3 6.5 max . 23 max. (Bottom View) * Relay mounting holes are not<br>38 [±0.2] required for the LDNP.<br>**----- End of picture text -----**<br> **Note:** When mounting, pay due attention to the direction of the key groove of applicable Relays. **==> picture [511 x 381] intentionally omitted <==** **----- Start of picture text -----**<br> Accessories for DIN Track Mounting (Order Separately) (Unit: mm)<br>DIN Tracks<br>PFP-100N<br> 7.3 [±0.15]<br>PFP-50N 4.5<br>35 [±0.3] 27 [±0.15]<br>Model<br>PFP-100N<br>1 5 25 10 25 25 10 25 15 (5) [*] 1<br>1,000 (500) [*] *Dimensions in parentheses are for the PFP-50N. PFP-50N<br>DIN Track 16<br>PFP-100N2 4.5<br>35 [±0.3] 27 24 29.2<br>Model<br>1 5 25 25 25 25 1 5 1 1.5<br>10 10 PFP-100N2<br>1,000<br>End Plate 1 0<br>6.2<br>PFP-M 1.8<br>M4×8<br>panhead<br>screw 1<br>50 35.5 35.3<br>1.8<br>11.5<br>Model<br>1 0 1.3 PFP-M<br>M4 screw and washer 4.8<br>Spacer 5 1 162<br>PFP-S<br>34.8<br>44.3<br>Model<br>PFP-S<br>16.5<br>**----- End of picture text -----**<br> **Note: 1.** Order the above products in multiples of 10. **2.** The Tracks conform to DIN standards. **27** **Products Related to Common Sockets and DIN Tracks** ## **Features of Screwless Sockets** ## Structured for Easy Wiring ## Complete Wiring in Three Steps Contact terminal (common) Contact terminal (NO) Contact terminal (NC) Insert a Screwdriver Insert the wire. Remove screwdriver screwdriver. inserted. to complete wiring. Release Lever (sold separately) • A spring holds the wire in place to reduce wiring work by Coil terminals 30% (according to OMRON comparison) and eliminates the Nameplate need to manage torque. (sold separately) • DIN terminal numbers also indicated. ## **Safety Precautions** ## ~~Do~~ **Precautions for Safe Use** - Do not move the screwdriver up, down, or from side to side or rotate it while it is inserted in the hole. Doing so may damage internal components in the Socket. - Do not insert more than one wire into the same hole. Doing so may cause abnormal heating. - There are two internally connected wiring holes for each terminal. • Insert the screwdriver along the hole wall as shown below. Screwdriver - When you remove a Socket from a support rail, insert the end of a screwdriver into the fixture and move the driver as shown by the arrow in the following figure. **==> picture [175 x 60] intentionally omitted <==** **----- Start of picture text -----**<br> Screwdriver<br>Fixture rail<br>"<br>**----- End of picture text -----**<br> - When you use a Release Lever to remove a Relay from a P2RF-@@-S Socket, insert a screwdriver at the location shown in the following figure and move the Release Lever in the direction indicated by the arrow to release the lock on the release lever. **28** omron ~~a~~ **Products Related to Common Sockets and DIN Tracks** ## **Precautions for Correct Use** ## **Wiring Tools** ## **Applicable Screwdriver** Use a flat-blade screwdriver with a tip that is 2.5 mm wide (3.0 mm max.). a 2.5 mm (3.0 mm max. ) You cannot use a screwdriver with a thick shaft. Applicable Screwdriver (Example) VESSEL No.9900 − (−) 2.5 × 75 ## **Applicable Wires** - You can use either solid wires or stranded wires. Applicable wire size: 0.2 to 1.5 mm[2] (AWG24 to AWG16) - Strip 8 to 9 mm of insulation from the ends of the wires. 8 to 9 mm - If you insert stranded wires without ferrules, make sure that the wires are twisted when you insert them. - If you use bare ferrules, always attach insulating sleeves. - If you insert a wire with a sheath outer diameter of 2.2 mm or less, do not insert the wire far enough so that the sheath is engaged inside the hole, as shown below. - Two wires with a sheath outer diameter of 3.2 mm or larger cannot be inserted for the same terminal at the same time. - Use heat-shrinking tubes to indicate wire numbers. **29** **Products Related to Common Sockets and DIN Tracks** ## **Wiring** **==> picture [217 x 67] intentionally omitted <==** **----- Start of picture text -----**<br> 12 11 10 9<br>Wire insertion holes<br>EP 41 EB 31 ER 21 Ep 11<br>Screwdriver insertion hole<br>nelea|neiea<br>><br>**----- End of picture text -----**<br> (1) Insert a screwdriver into a screwdriver insertion hole on the Socket. **==> picture [173 x 77] intentionally omitted <==** **----- Start of picture text -----**<br> Cross-section A-A Spring<br>a, Wire insertion hole<br>Screwdriver<br>a<br>Screwdriver insertion hole<br>**----- End of picture text -----**<br> (2) Press the screwdriver in until it reaches the stopper inside the Socket. The spring at the back of the wire insertion hole will be complete open in this condition. The screwdriver will be held in place even if you remove your hand. (3) With the screwdriver held in place, insert the wire or ferrule into the wire insertion hole. **==> picture [16 x 6] intentionally omitted <==** **----- Start of picture text -----**<br> Wire<br>**----- End of picture text -----**<br> (4) Remove the screwdriver. The spring will hold the wire. This concludes the connection procedure. **30** ## Terms and Conditions Agreement ## Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. ## Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. ## Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. ## Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. ## Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. ## Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. ## Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. ## Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. **In the interest of product improvement, specifications are subject to change without notice.** ## **OMRON Corporation** ## **Industrial Automation Company** 2017.4 **http://www.ia.omron.com/** (c)Copyright OMRON Corporation 2017 All Right Reserved.
Updated at June 7, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →