OPB9001C

## **Reflective Optical Sensor** 

## OPB9001 Series 

## **Features:** 

- Wide operating supply voltage range up to 3.3 V - 30 V 

- Ability to drive the output up to 30 V 

- Integrated drive circuitry 

- Increased ESD up to 8 kV 

- EMI immunity capability to EMC Directive 2014/30-EU 

- UL & CE approved 

- Detecting distance 2.5 mm to 50 mm 

- Ambient light rejection 25 klx+ 

- Programmable output configuration and sensitivity level 

- Integrated 4-pin connector for plug and play capability 

- -40 °C to +85 °C operating temperature range 

- Small footprint dimensions L 18 mm X  W 12 mm X H 5 mm 

## **Description:** 

The OPB9001 PCB module takes the versatile and programmable OPB9000 reflective sensor and enhances its capabilities by integrating multiple features into a robust, small form factor for ease of use. The OPB9001 accepts a wide range of supply voltages from 3.3V  to 30 V and comes with built-in voltage protection for maximum flexibility and protection. An integrated, industry standard 4-pin Molex connector provides ease of connection while the onboard LED indicators provide overall status during power-on, output and calibration. 

The OPB9001 is designed for portability in a variety of position and presence detect applications, with a small form factor (188 mm x 12 mm x 5 mm) to fit in even the smallest application spaces. 

The full-featured OPB9001AC includes a robust Transient Voltage Suppressor (TVS) diode to protect against harmful voltage spikes and is CE and UL certified for maximum reliability under any environmental condition.  It is also capable of withstanding up to 8 kV of contact discharge HBM. 

Factory calibrated for a 12 mm distance and a white reflective surface the OPB9001 can be re-calibrated in a matter of milliseconds with a single command for specific application requirements. An interface cable can be purchased separately to calibrate the OPB9001 Series using the OPB9000-KIT. 

The product has been assessed to meet high safety, health, and environmental protection requirements as determined by CE and EMC directives, providing for increased ESD and EMI immunity. 

Note 1: For additional information on how to program OPB9000, see the datasheet: htps://www.telectronics.com/TTElectronics/media/ProductFiles/Optoelectronics/Datasheets/OPB9000.pdf 

## **Applications:** 

- Non-contact position presence applications 

- Industrial printing and high-speed paper detection 

- Manufacturing and Factory automation 

- Automated sewing machines 

- Automated banking machines 

- Medical equipment 

- Automatic dispensing 

- Material handling and asset tracking 

## **Additional Features:** 

- 6ms response time 

- Wide operating supply voltage range 

   - 4.5 V to 30 V (OPB9001A/AC) 

   - 4.5 V to 24 V (OPB9001B) 

   - 3.3 V to 5.5 V (OPB9001C) 

- Reverse voltage protection 

- Single-command calibration with on-chip EPROM 

- Temperature-compensated LED drive 

- Eliminate the need for external drive circuitry 

## General Note 

TT Electronics reserves the right to make changes in product specification without notice or liability.  All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

TT Electronics | OPTEK Technology 

1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

Issue B    10/2019   Page 1 

© TT electronics plc 

## **Reflective Optical Sensor** 

OPB9001AC, OPB9001A, OPB9001B, OPB9001C 

**Part Number Guide — OPB9001** 

**OP9001 Reflective Assembly** 

**OPB9001 X** 

**VDD Voltage Range** A - 4.5 V to 30 V B - 4.5 V to 24 V C - 3.3 V to 5.5 V AC - 4.5 V to 30 V CE / UL 

|**OP9001 Reflective Assembly**|**OP9001 Reflective Assembly**|~~i~~|B - 4.5 V to 24 V<br>C - 3.3 V to 5.5 V<br>AC - 4.5 V to 30 V CE / UL<br>~~i~~|
|---|---|---|---|
|**Ordering Part**<br>**Number**|**Voltage Output**<br>**Configuration**|**VCC Range**|**Features**|
|OPB9001AC|N.O. NPN|4.5 V to 30 V|OPB9000 with indicators, voltage regulator + NPN Transistor 30 V +ESD TVS<br>diodes and CE and UL Certifications and connector|
|OPB9001A|N.O. NPN|4.5 V to 30 V|OPB9000 with indicators,voltage regulator + NPN Transistor 30 V  and connector|
|OPB9001B|N.O. NPN|4.5 V to 24 V|OPB9000 with indicators,voltage regulator + NPN Transistor 24 V  and connector|
|OPB9001C|TTL CMOS|3.3 V to 5.5 V|OPB9000 with indicators and connector|
|OPB90014CB|N/A|N/A|1m interface cable with connector|
|OPB9000-KIT|N/A|N/A|OPB9000 reflective sensor evaluation kit for testing and auto-calibration (requires<br>OPB90014CB interface cable)|



General Note TT Electronics reserves the right to make changes in product specification without notice or liability.  All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

TT Electronics | OPTEK Technology 1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

Issue B     10/2019   Page 2 

© TT electronics plc 

## **Reflective Optical Sensor** 

OPB9001AC, OPB9001A, OPB9001B, OPB9001C 

## **Recommended Circuit Application** 

## OPB9001A/AC/B 

## OPB9001C 

General Note TT Electronics reserves the right to make changes in product specification without notice or liability.  All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

TT Electronics | OPTEK Technology 1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

Issue B     10/2019   Page 3 

© TT electronics plc 

## **Reflective Optical Sensor** 

## OPB9001AC, OPB9001A, OPB9001B, OPB9001C 

## **Package Outline—OPB9001XX (For reference)** 

**==> picture [40 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
OPB9000<br>**----- End of picture text -----**<br>


**==> picture [36 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
P1 Pin 1<br>**----- End of picture text -----**<br>


P1—Molex connector  P/N 504050-0491 

Molex matting connector  P/N 5040510401 with terminals 5040520098 

**==> picture [59 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Testing surface<br>**----- End of picture text -----**<br>


3-Color Indicator ~~—~~ Red: Power on Orange: Output high Green: Flashing while calibrating 

|**Pin #**|**Name**|**Description**|
|---|---|---|
|**1**|VOUT|Logic Output, also used as a digital output to read register bits|
|**2**|CAL|Calibrate input/status output ( to verify successful calibration)|
|**3**|GND|Ground Connection|
|**4**|VIN|Positive supply power input|



Dimensions are in inches [mm].  Tolerances are: +/- 10% unless otherwise specified 

General Note 

TT Electronics | OPTEK Technology 1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

TT Electronics reserves the right to make changes in product specification without notice or liability.  All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

Issue B     10/2019   Page 4 

© TT electronics plc 

**Reflective Optical Sensor** OPB9001AC, OPB9001A, OPB9001B, OPB9001C 

**OPB9001XX Absolute Maximum Ratings (TA = 25°C unless otherwise noted)** 

**Parameter Symbol Part Number Maximum Units** DC supply voltage OPB9001A/AC 32 VIN OPB9001B 24 V OPB9001C 6 ~~So~~ Storage Temperature Range TSTG ALL -40  to +100 °C ~~eses es~~ Operating Temperature Range TOPR ALL -40  to +85 °C ~~esrs ns~~ Ambient/background light Ix ALL 25 klx ESD immunity OPB9001AC 8, contact discharge kV (human body model) — OPB9001A/B/C 2, contact discharge kV ~~ee~~ Maximum reverse voltage VRRM ALL 30 V ~~es~~ Load current ( Collector OPB9001A/AC 40 mA current) IL ~~a eeeesGs~~ Maximum Open collector OPB9001A/AC 40 V output  voltage — ~~a ee~~ Current into or out of any pin OPB9001C 20 mA other than GND. — ~~a ee~~ Current into or out of GND  or OPB9001C 150 mA Icc Vin ~~a ee~~ 

**Note** : Permanent damage to the device may occur if operated outside the Absolute maximum specifications. Proper function and reliability of the device at these or any other conditions outside the recommended operating conditions may also be  adversely affected 

> TT Electronics | OPTEK Technology 1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

General Note TT Electronics reserves the right to make changes in product specification without notice or liability.  All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

Issue B     10/2019   Page 5 

© TT electronics plc 

## **Reflective Optical Sensor** 

## OPB9001AC, OPB9001A, OPB9001B, OPB9001C 

## **Specifications** 

|**SYMBOL**|**PARAMETER**|**MIN**|**TYP**|**MAX**|**UNITS**|**NOTES**|
|---|---|---|---|---|---|---|
|VIN|Supply Voltage<br>OPB9001A/AC<br>OPB9001B<br>OPB9001C|4.5<br>4.5<br>3.3|-|30<br>24<br>5.5|V||
|Iss|Current Consumption|-||16|mA|RL= 10KΩ|
|RL<br>~~ee~~|Pull up resistor (OUT pin)<br>OPB9001A/AC<br>OPB9001B|1<br>1|~~nn~~|10<br>10|kΩ<br>kΩ|4.5V < Vcc < 30V<br>4.5V  <Vcc < 24 V|
|~~a en~~<br>~~ee~~<br>~~ee~~|Sensing Distance Range<br>~~en~~<br>~~nn~~<br>|2.5<br>~~en~~<br>|~~en~~<br>~~nn~~<br>|50<br>~~en~~<br>|mm<br>~~en~~<br>|~~en~~<br>|
|~~ee~~<br>~~ee~~|Output type<br>~~nn~~<br>|NPN open collector<br>~~nn~~<br>|||||
|OUT<br>~~ee~~<br>~~ee~~<br>~~ee~~|Output indicator<br>~~nn~~<br>~~**en**~~|Orange LED (ON when output high, OFF when output low)<br>~~nn~~<br>~~**en**~~|||||
|PWR<br>~~ee~~<br>~~ee~~|Power indicator<br>~~nn~~<br>~~**en**~~|Red LED (ON when Vin min is met)<br>~~**en**~~|||||
|CAL<br><br>~~ee~~<br>~~a~~|Calibration indicator<br>~~**en**~~|Green LED (Flashing while it is being calibrated)<br>~~**en**~~|||||



## **Electrical Characteristics** (TA = 25° C unless otherwise noted) 

|**SYMBOL**|**PARAMETER**|**MIN**|**TYP**|**MAX**|**UNITS**|**TEST CONDITIONS**|
|---|---|---|---|---|---|---|
|VOL|Output voltage (low)<br> OPB9001A/AC<br>OPB9001B<br>OPB9001C|-|-|0.4|V|**Note 1**<br>VIN= 30  or  VIN= 4.5 no target<br>VIN= 24 or  VIN= 4.5 no target<br>VIN= 5V ,  target at d = 6 mm<br>Target = 90 % diffuse white test surface|
|VOH|Output voltage ( high)<br>OPB9001A/AC/B(Note 2)<br>OPB9001C|0.95*VIN<br>Vin—1|-|VIN|V|Target at d = 6 mm<br>Target = 90 % diffuse white test surface<br>VIN= 5 V , no target|
|IL|Load current<br>OPB9001A/AC/B||VIN/RL||mA|**Note 2**|



**Note 1:** OPB9000 is in  push pull configuration .For additional  information refer to the OPB9000 datasheet **Note 2 :** Using a external pull up resistor . 

General Note TT Electronics reserves the right to make changes in product specification without notice or liability.  All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

TT Electronics | OPTEK Technology 1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

Issue B     10/2019   Page 6 

© TT electronics plc 

## **Reflective Optical Sensor** 

## OPB9001AC, OPB9001A, OPB9001B, OPB9001C 

## **Typical Characteristics (TA = 25 °C unless noted otherwise)** 

**==> picture [183 x 157] intentionally omitted <==**

**----- Start of picture text -----**<br>
Supply Current vs Supply Voltage<br>(OPB9001C)<br>7<br>6<br>5<br>4<br>;<br>3.3 3.6<br>Supply Voltage VIN (Volts)<br>Supply Current Iss (mA)<br>**----- End of picture text -----**<br>


**Note:** Refer to OPB9000 datasheet  for additional performance graphs. htps://www.telectronics.com/TTElectronics/media/ProductFiles/Optoelectronics/Datasheets/OPB9000.pdf 

TT Electronics | OPTEK Technology 1645 Wallace Drive, Carrollton, TX 75006 | Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

General Note TT Electronics reserves the right to make changes in product specification without notice or liability.  All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

Issue B     10/2019   Page 7 

© TT electronics plc