OPB811W55Z

## Wide Gap Slotted Optical Switch 

## OPB800 (L and W Series) 

**==> picture [112 x 69] intentionally omitted <==**

**----- Start of picture text -----**<br>
eg W Package<br>L Package<br>**----- End of picture text -----**<br>


## **Features:** 

- 0.375” (9.525 mm) wide gap 

- Choice of aperture size 

- Choice of minimum photocurrent  Choice of opaque or IR transmissive shells **L Package**  Available for PCBoard mounting or with 24” 26 AWG wires 

- ~~—~~ **Description:** The OPB800L series, PCBoard mounting, of wide gap switch provides the flexibility of a custom device from a standard product line, while the OPB800W series, remote mounted, switch offers 24” (610 mm) 26 AWG wire interconnect. 

Building from a standard housing that utilizes a 0.375” (9.5 mm) wide slot, a user can specify the electrical output parameters, discrete shell material and the aperture width. 

Housings are made from an opaque grade of injection-molded plastic that minimizes the assembly’s sensitivity to visible and near-infrared ambient radiation.  Discrete shells, which are exposed on parallel faces inside the device throat, are made of IR transmissive plastic (for applications where aperture contamination may occur) or of opaque plastic with aperture openings (for maximum protection against ambient light). 

## **Applications:** 

- Non-contact interruptive object sensing 

- Assembly line automation 

- Machine automation 

- Equipment security 

**==> picture [513 x 309] intentionally omitted <==**

**----- Start of picture text -----**<br>
  Machine safety<br>Part Number Guide<br>OPB  8 X X X X X Z<br>For “W” series only<br>Optek Assembl y  Sensor Aperture:<br>1 —  0.010” (.254 mm)<br>5 —  0.050” (1.270 mm)<br>Phototransistor Output Fam ily  Emitter Aperture:<br>5 —  0.050” (1.270 mm)<br>Discrete Shell Materia l:  Mounting configurations:<br>0 —  Transmissive plastic  L —  Solder lead termination<br>Discrete shell Se W —  Wire termination<br>1 —  Opaque plastic  Electrical Specification Variations:<br>Discrete shell 0  = Electrical Parameter A<br>1  = Electrical Parameter B<br>2  = Electrical Parameter C<br>Note:    Assemblies with 0.010” apertures are<br>currently available with electrical<br>parameter  “A” only.<br>Wires = 26AWG—24” Long<br>Oo<br>General Note<br>TT Electronics | Optek Technology, Inc.<br>TT Electronics reserves the right to make changes in product specification without<br>1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200<br>notice or liability.  All information is subject to TT Electronics’ own data and is<br>www.ttelectronics.com | sensors@ttelectronics.com<br>considered accurate at time of going to print.<br>**----- End of picture text -----**<br>


TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

Issue B     11/2016     Page 1 

© TT electronics plc 

## Wide Gap Slotted Optical Switch 

## **Electrical Specifications** 

## **Absolute Maximum Ratings** (TA=25°C unless otherwise noted) 

|Storage and Operating Temperature|Storage and Operating Temperature||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|L Series|||||||||-40° C to +85° C||
|W Series|||||||||-40° C to +80° C||
|Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron]||||||Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](2)|||260° C||
|**Input Diode**|||||||||||
|Forward DC Current|||||||||50 mA||
|Peak Forward Current (1 µs pulse width, 300 pps)||||||||||3 A|
|Reverse DC Voltage||||||||||2 V|
|Power Dissipation(1)|||||||||100 mW||
|**Output Phototransistor**|||||||||||
|Collector-Emitter Voltage||||||||||30 V|
|Emitter-Collector Voltage||||||||||5 V|
|Collector DC Current|||||||||30 mA||
|Power Dissipation(1)|||||||||100 mW||
|[30.99+0.25<br>|<br>1.22+.01<br>[25.40+0.25|||1<br>e||3<br>e||3|**Color/Pin #**<br>Red-1||**Description**<br>Anode||
|PIN #1 INDICATOR<br>1.00+.01|||||||||||
|al<br>[3.18+0.13 ||[3.**1**8+40**.**13 |<br>2X $. 25+ 005|~~V~~v||~|||Black-2<br>White-3||Cathode<br>Collector||
|-125+.005<br>OPTICAL¢|[18.67+0.25|<br>.735+.01|2<br>e||4<br>e||4|Green-4||Emitter||



General Note 

TT Electronics reserves the right to make changes in product specification without notice or liability.  All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

Issue B     11/2016     Page 2 

© TT electronics plc 

## Wide Gap Slotted Optical Switch 

**Electrical Characteristics** (TA = 25°C unless otherwise noted) 

|**Electrical Characteristics**(TA = 25°C unless otherwise noted)A = 25°C unless otherwise noted)= 25°C unless otherwise noted)|**Electrical Characteristics**(TA = 25°C unless otherwise noted)A = 25°C unless otherwise noted)= 25°C unless otherwise noted)|**Electrical Characteristics**(TA = 25°C unless otherwise noted)A = 25°C unless otherwise noted)= 25°C unless otherwise noted)|**Electrical Characteristics**(TA = 25°C unless otherwise noted)A = 25°C unless otherwise noted)= 25°C unless otherwise noted)|**Electrical Characteristics**(TA = 25°C unless otherwise noted)A = 25°C unless otherwise noted)= 25°C unless otherwise noted)|**Electrical Characteristics**(TA = 25°C unless otherwise noted)A = 25°C unless otherwise noted)= 25°C unless otherwise noted)|**Electrical Characteristics**(TA = 25°C unless otherwise noted)A = 25°C unless otherwise noted)= 25°C unless otherwise noted)|**Electrical Characteristics**(TA = 25°C unless otherwise noted)A = 25°C unless otherwise noted)= 25°C unless otherwise noted)|
|---|---|---|---|---|---|---|---|
|**SYMBOL**<br>**PARAMETER**<br>**MIN**<br>**TYP**<br>**MAX**<br>**UNITS**<br>**TEST CONDITIONS**<br>**Input Diode**<br>~~Po~~||||||||
||VF|Forward Voltage|-|-|1.7|V|IF= 20 mA|
||IR|Reverse Current|-|-|100|µA|VR= 2 V|
||**Output Phototransistor**|||||||
||V(BR)CEO|Collector-Emitter Breakdown Voltage|30|-|-|V|IC= 1 mA|
||V(BR)ECO|Emitter-Collector Breakdown Voltage|5|-|-|V|IE= 100 µA|
||ICEO|Collector-Emitter Dark Current|-|-|100|nA|VCE= 10 V|
||**Combined**|||||||
|||Collector-Emitter Saturation Voltage||||||
||VCE(SAT)|Parameter A<br>(OPB800,OPB810)<br>Parameter B<br>(OPB801,OPB811)|-<br>-|-<br>-|0.4<br>0.4|V<br>V|IC= 250 µA, IF= 20 mA<br>IC= 500 µA, IF= 10 mA|
|||Parameter C<br>(OPB802,OPB812)|-|-|0.6|V|IC= 1800 µA, IF= 20 mA|
|||On-State Collector Current||||||
||IC(ON)|Parameter A<br>(OPB800,OPB810)<br>Parameter B<br>(OPB801,OPB811)|0.625<br>1.25|-<br>-|-<br>-|mA|VCE= 10 V, IF= 20 mA<br>VCE= 5 V, IF= 10 mA|
|||Parameter C<br>(OPB802,OPB812)|2.25|-|-||VCE= 0.6 V, IF= 20 mA|



Notes: 

(1) Derate linearly 1.67 mW/° C above 25° C. 

(2) RMA flux is recommended.  Duration can be extended to 10 seconds maximum when flow soldering. 

(3) All parameters tested using pulse technique. 

(4) Methanol or isopropanol are recommended as cleaning agents.  Plastic housing is soluble in chlorinated hydrocarbons and ketones. 

(5) The W Series includes wire terminations of 24” (610 mm) 7-strand, 26 AWG UL insulated wire on each terminal.  Each  device incorporates a wire strain relief at the housing surface.  The insulation functions and colors are:  anode (red), cathode (black), phototransistor collector (white) and phototransistor emitter (green). 

TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

General Note TT Electronics reserves the right to make changes in product specification without notice or liability.  All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

Issue B     11/2016     Page 3 

© TT electronics plc 

## Wide Gap Slotted Optical Switch 

**==> picture [504 x 547] intentionally omitted <==**

**----- Start of picture text -----**<br>
OPB800_51 - Flag Next to Emitter OPB800_51 - Flag Next to Sensor<br>1.2 1.2<br>Top to Bottom<br>Top to<br>1.0 pi, 1.0<br>0.8 a Se| tr} hE 0.8 eeeTf<br>Left to Right Right to Left Left to Right Right to Left<br>0.6 0.6<br>0.4 a 0.4 on<br>Right to Left Right to Left<br>Left to Right Left to Right<br>Top to Bottom Top to Bottom<br>0.2 a 0.2<br>0.0 ee n e n 0.0 oe<br>0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25<br>Distance (inches) Displacement Distance (inches)<br>OPB800_51 - Flag in Middle of Slot<br>1.2<br>Top to<br>1.0 ity<br>| [| Top to Bottom<br>0<br>0.8<br>vi<br>Left to Right Right to Left<br>0.6 TN<br>Emitter<br>Left to Right Right to Left<br>0.4 en ee<br>Right to Left<br>Left to Right<br>Sensor<br>Top to Bottom<br>0.2<br>ee ee —<br>0 Width<br>0.0 eee ce<br>0.00 0.05 0.10 0.15 0.20 0.25<br>Distance (inches)<br>Response  Response<br>C(ON)  C(ON)<br>Normalized I Normalized I<br> Response<br>C(ON)<br>Normalized I<br>**----- End of picture text -----**<br>


General Note 

TT Electronics reserves the right to make changes in product specification without notice or liability.  All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

Issue B     11/2016     Page 4 

© TT electronics plc 

## Wide Gap Slotted Optical Switch 

**==> picture [504 x 546] intentionally omitted <==**

**----- Start of picture text -----**<br>
OPB800_55 - Flag Next to Emitter OPB800_55 - Flag Next to Sensor<br>1.2 1.2<br>Top to  Top to<br>1.0 1.0<br>ee ee ee<br>0.8 0.8<br>ee e ee ee<br>Left to Right Right to Left Left to Right Right to Left<br>0.6 0.6<br>oo AR<br>0.4 MM 0.4<br>Right to Left Right to Left<br>Left to Right Left to Right<br>Top to Bottom Top to Bottom<br>0.20.0 —eeME 0.20.0 UME<br>nN nN<br>0.00 0.05 0.10 0.15 0.20 0.25 0.00 0.05 0.10 0.15 0.20 0.25<br>Distance (inches) Distance (inches)<br>OPB800_55 - Flag in Middle of Slot<br>1.2<br>Top to<br>1.0 iy<br>| 0 Top to Bottom<br>0.8<br>MV 7<br>Left to Right Right to Left<br>0.6<br>es ee<br>Emitter<br>0.4 eek ee Left to Right Right to Left<br>Right to Left<br>Left to Right<br>Top to Bottom Sensor<br>0.2<br>ME _<br>0 Width<br>0.0 ee<br>a ee<br>0.00 0.05 0.10 0.15 0.20 0.25<br>Distance (inches)<br> Response  Response<br>C(ON) C(ON)<br>Normalized I Normalized I<br> Response (mA)<br>C(ON)<br>Typical I<br>**----- End of picture text -----**<br>


General Note 

TT Electronics reserves the right to make changes in product specification without notice or liability.  All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. 

TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com 

Issue B     11/2016     Page 5 

© TT electronics plc