NTCG103JF103FT1

February 2024 

## NTC thermistors 

Temperature protection devices Commercial grade 

## NTCG series 

**NTCG 0402 JIS 0402 [EIA 01005] NTCG 0603 JIS 0603 [EIA 0201] NTCG 1005 JIS 1005 [EIA 0402] NTCG 1608 JIS 1608 [EIA 0603] NTCG 2012 JIS 2012 [EIA 0805]** 

(2/20) 

## **reminders for using these products** 

Before using these products, be sure to request the delivery specifications. 

## **SAFETY REMINDERS** 

Please pay sufficient attention to the warnings for safe designing when using this products. 

## **REMINDERS** 

Incorrect usage may lead to destroyed NTC thermistors and damages or malfunctions with the devices used. 

- ◯Please use them within the ranges of the ratings and performance provided in the catalog and delivery specifications upon confirming the environments where they are to be used and installed. 

- ◯Do not use them outside the operating temperature range. 

- ◯Do not use them with the ratings or maximum permissible power levels exceeded. 

- ◯Do not quickly apply 5mW or more of load with the constant-voltage power supply in the NTC thermistors as this may lead to staying in thermal runaway mode or the red-shorting of chips. 

- ◯Please be cautious of the applied voltage in thermistors as instruments may malfunction with the lowering of resistance due to self heating. 

- ◯With instruments that consumers can touch the thermistors with their hands, please carefully warn them not to touch the thermistors. 

- ◯Store them in locations where the temperature is 10°C to +40°C and the relative humidity is 75% or below, avoid environments where there are sudden changes in temperatures, direct sunlight, corrosive gas, grit, or dust, and keep them packed in a manner where no loading stress is applied in order to avoid deterioration and damage. (please use them within six months.) 

- ◯When sealing thermistors, please do so upon first considering the type, quantity, hardening conditions, and adhesiveness of the sealing material and confirming its reliability. 

- ◯Avoid powerful vibrations, impact (such as by dropping), pressure, etc. on thermistors that exceed the prescribed levels. 

- ◯Do not use them for long periods of time in environments with a relative humidity of over 85%. (this excludes cases where countermeasures have been taken.) 

- ◯Do not use them in the following environments. (this excludes cases where countermeasures have been taken.) - Corrosive gases (Cl2, NH3, SOx, NOx, etc.) 

- Environments with highly conductive substances (electrolytes, water, saltwater, etc.) 

- Environments with acid, alkali, or organic solvents 

- Dusty areas 

- ◯Please observe the following precautions when attaching them to substrates as failure to do so may result in destruction or malfunction. 

- Do not let the substrates get warped or twisted at any time during the soldering. 

- The landing size must be even on both the left and right sides. 

- Do not use items that have been dropped or detached. 

- Do not allow the adherence of more solder than needed. 

- ◯Reflow mounting is recommended with NTC thermistors, and not flow (dip) mounting. 

- ◯Attaching or making corrections with a soldering iron is not recommended as it can lead to troubles such as significant distorting due to thermal shock or cracking. If a soldering iron must be used, it should be 20W or below with the temperature of the tip at 350°C or below, and at a maximum of 5 seconds of soldering time. Also, do not let the tip of the soldering iron come in direct contact with the chips. 

- ◯Please use a substance such as resin that does not generate hydrogen (H2) when forming insulation film over chips. 

- ◯Please contact our sales offices when considering the use of the products listed on this catalog for applications, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property (\qspecific uses\q such as automobiles, airplanes,medical instruments, nuclear devices, etc.) as well as when considering the use for applications that exceed the range and conditions of this catalog. 

Please note that we are not responsible for any damages or losses incurred resulting from the use of these products that exceeds the range and conditions of this catalog or specific uses. 

Please take appropriate measures such as acquiring protective circuits and devices that meet the uses, applications, and conditions of the instruments and keeping backup circuits. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(3/20) 

## NTC thermistors 

## **RoHS Directive Compliant Product Compatible with lead-free solders** 

## Commercial grade 

## **Overview of the NTCG series** 

## **■CHARACTERISTICS OF NTC THERMISTORS** 

## **■FEATURES** 

◯0402 to 2012mm wide lineup0402 to 2012mm wide lineup 

NTC(Negative Temperature Coefficient) thermistors are ◯0402 to 2012mm wide lineup0402 to 2012mm wide lineup manufactured from sintered metal oxides. Each thermistor ◯125°C consists of a combination of two to four of the following ◯UL1434 acquisition (FileUL1434 acquisition (File No.E250289) materials:Mn, Ni, Co, and Cu. NTC thermistors are semiconductor resistors that exhibit decreasing resisrance with increasing temperature. TDK thermistors have low thermal time constants which result in extremely high rates of resistance change to accurately track the temperature. ① **Fig.1 R-T Curve : 10kohm@25°C** 1000 100 e ~~s~~ & ② a 10 ⑤ ③ ④ 1 **No. Name** (1) Semiconductor ceramics (2) Internal electrode(Pd or AgPd) (3) Ag (4) Terminal electrode Ni 0.1 (5) Sn 

◯UL1434 acquisition (FileUL1434 acquisition (File No.E250289) 

## **Fig.2 Internal structure of the multilayer chip thermistors** 

## **Fig.1 R-T Curve : 10kohm@25°C** 

**==> picture [207 x 224] intentionally omitted <==**

**----- Start of picture text -----**<br>
1000<br>100<br>e s<br>a<br>10<br>1<br>0.1<br>–40 0 50 100 150 200<br>Temperature (°C)<br>)Ω<br>Resistance (k<br>**----- End of picture text -----**<br>


◯RoHS Directive Compliant Product: See the following for more details. https://product.tdk.com/en/environment/rohs/index.html 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(4/20) 

## NTC thermistors 

## **RoHS Directive Compliant Product Compatible with lead-free solders** 

## Commercial grade 

## **Overview of the NTCG series** 

## **■PART NUMBER CONSTRUCTION** 

|||**NTC**|**G**|**G**|○○|○○||**3E**|**3E**||||**H**||**101**|**101**|**101**|||□|□|||**T**|**T**||||□□□|□□□|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
||||||||||||||||||||||||||||||||
||**Series name**||**Structural**<br>**classification**||**shapes and**<br>**dimensions**<br>**Code**<br>**(mm)**|||**B constant***||||**B**<br>**constant**<br>**tolerance**<br>**(%)**|||**Nominal**<br>**resistance**<br>**(Ω)**||||**Nominal**<br>**resistance**<br>**tolerance**<br>**(%)**||||**Packaging**<br>**style**|||||**TDK internal code**|||
|*** B constant**<br>NTC thermistor<br>G<br>Multilayer internal<br>electroded<br>chip type<br>NTC thermistor<br>(Pb free type)<br>04<br>0402<br>X<br>±0.7<br>300<br>30<br>D<br>±0.5<br>T<br>Taping<br>1<br>Commercial grade<br>(1005mm or more)<br>B constant: 25/85°C<br>06<br>0603<br>F<br>±1<br>101<br>100<br>F<br>±1<br>1X<br>Commercial grade<br>(1005mm or more)<br>B constant: 25/50°C<br>10<br>1005<br>H<br>±3<br>102<br>1000<br>(1kΩ)<br>H<br>±3<br>B<br>Commercial grade<br>(0603mm or less)<br>B constant: 25/85°C<br>16<br>1608<br>J<br>±5<br>103<br>10000<br>(10kΩ)<br>J<br>±5<br>BX<br>Commercial grade<br>(0603mm or less)<br>B constant: 25/50°C<br>20<br>2012<br>~~LE|/HE=~~|||||||||||||||||||||||||||||||
|**B constant (K)**|||||||||||||||||||||||||||||||
|2A||2000 to 2050|3A||3000 to 3050|||4A|4000 to 4050|||4000 to 4050|4000 to 4050||||||||||||||||||
|2B||2051 to 2100|3B||3051 to 3100|||4B|4051 to 4100|||4051 to 4100|4051 to 4100||||||||||||||||||
|2C||2101 to 2150|3C||3101 to 3150|||4C|4101 to 4150||4101 to 4150||||||||||||||||||||
|2E||2201 to 2250|3E||3201 to 3250|||4E|4201 to 4250|||4201 to 4250|4201 to 4250||||||||||||||||||
|2F||2251 to 2300|3F||3251 to 3300|||4F|4251 to 4300|||4251 to 4300|4251 to 4300||||||||||||||||||
|2J||2401 to 2450|3J||3401 to 3450|||4J|4401 to 4450|||4401 to 4450|4401 to 4450||||||||||||||||||
|2K||2451 to 2500|3K||3451 to 3500|||4K|4451 to 4500|||4451 to 4500|4451 to 4500||||||||||||||||||
|2L||2501 to 2550|3L||3501 to 3550|||4L|4501 to 4550|||4501 to 4550|4501 to 4550||||||||||||||||||
|2N||2601 to 2650|3N||3601 to 3650|||4N|4601 to 4650|||4601 to 4650|4601 to 4650||||||||||||||||||
|2Q||2701 to 2750|3Q||3701 to 3750|||4Q|4701 to 4750|||4701 to 4750|4701 to 4750||||||||||||||||||
|2S||2801 to 2850|3S||3801 to 3850|||4S|4801 to 4850|||4801 to 4850|4801 to 4850||||||||||||||||||



The B constant indicates the magnitude of a change in a zero-load resistance value to a temperature, and is obtained based on arbitrary two temperatures in resistance-to-temperature characteristics. 

## B constant calculation formula 

B: B constant (K) 

T1: Arbitrary temperature (K) InR1–InR2 T2: Arbitrary temperature different from T1 (K) B= – R1:Zero-load resistance value at temperature T1(Ω) (1/T1) (1/T2) R2: Zero-load resistance value at temperature T2(Ω) Each temperature is measured in absolute temperature. 0°C=273.15K 

|**Shape symbol (JIS)**|**Shape symbol (JIS)**|**Shape symbol (JIS)**|**L**<br>**(mm)**|**W**<br>**(mm)**<br>**T**<br>**(mm)**|**B**<br>**(mm)**|
|---|---|---|---|---|---|
|0402|||0.40±0.02|0.20±0.02<br>0.20±0.02|0.07min|
|0603|||0.60±0.03|0.30±0.03<br>0.30±0.03|0.1min|
|1005|||1.00±0.05|0.50±0.05<br>0.50±0.05|0.1min|
|1608|||1.60±0.10|0.80±0.10<br>0.80±0.10|0.2min|
|2012|||2.00±0.20|1.25±0.20<br>0.70±0.20|0.2min|



**==> picture [64 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
T<br>L<br>B<br>W<br>**----- End of picture text -----**<br>


Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(5/20) 

## NTC thermistors 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

Commercial grade 

## **Overview of the NTCG series** 

## **■RATINGS** 

|**■RATINGSRATINGS**|||||||
|---|---|---|---|---|---|---|
|Size|mm|0402|0603|1005|1608|2012|
|Maximum ratedpower(25°C)*1|mW|60|100|100|100|200|
|Dissipation factors(25°C)*2|mW/°C|mW/K|0.6|1|1|1|2|



*1 Maximum rated power: Maximum power: at rated temperature (25°C), maximum power that can be applied continuously 

- *2 Dissipation factors: powered that it is equivalent that be increased in self-heating by load power thermistor at 1°C temperature 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(6/20) 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

## NTC thermistors 

## Commercial grade 

## **NTCG series 0402 type** 

## **■SHAPE & DIMENSIONS** 

## **■RECOMMENDED LAND PATTERN** 

**==> picture [111 x 151] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.4±0.02<br>0.07min.<br>LI<br>Dimensions in mm<br>0.2±0.02<br>0.2±0.02<br>**----- End of picture text -----**<br>


**==> picture [136 x 66] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.15 to 0.20 0.2 Nom. 0.15 to 0.20<br>Dimensions in mm<br>0.18 to 0.20<br>**----- End of picture text -----**<br>


## **■JIS 0402 [EIA 01005] (Operating temperature range : –40 to 125°C)** 

|**Part No.**|**Resistance**|**Resistance**|**B constant**|**B constant**|**B constant**|**B constant**|**B constant**|**Permissible**|**Operating**|
|---|---|---|---|---|---|---|---|---|---|
||**value**|**tolerance**|||||**tolerance**|**operating**|**temperature**|
|||||||||**current**|**range**|
||**[25°C]**||**[25/50°C]**|**[25/75°C]**|**[25/85°C]**|**[25/100°C]**||**[25°C]**||
||**(Ω)**||**(K)**|**(K)**|**(K)**|**(K)**|**(K)**|**(mA)**|**(°C)**|
|NTCG043JF103FTBX|10,000|±1%|3380|3413|3426|3445|±1%|0.24|–40 to 125|
|NTCG044EF104FTBCX|100,000|±1%|4250|4283|4293|4306|±1%|0.07|–40 to 125|
|NTCG044EF474FTBCX|470,000|±1%|4250|4293|4308|4306|±1%|0.03|–40 to 125|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(7/20) 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

## NTC thermistors 

## Commercial grade 

## **NTCG series 0603 type** 

## **■SHAPE & DIMENSIONS** 

## **■RECOMMENDED LAND PATTERN** 

**==> picture [111 x 151] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.6±0.03<br>0.15±0.05<br>OI<br>Dimensions in mm<br>0.3±0.03<br>0.3±0.03<br>**----- End of picture text -----**<br>


**==> picture [126 x 66] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.2 to 0.3 0.25 to 0.35 0.2 to 0.3<br>Dimensions in mm<br>0.25 to 0.35<br>**----- End of picture text -----**<br>


## **■JIS 0603 [EIA 0201] (Operating temperature range : –40 to 125°C)** 

|**Part No.**|**Resistance**|**Resistance**|**B constant**<br>**B constant**<br>**B constant**|**B constant**|**B constant**<br>**Permissible**<br>**Operating**|
|---|---|---|---|---|---|
||**value**|**tolerance**|||**tolerance**<br>**operating**<br>**temperature**|
||||||**current**<br>**range**|
||**[25°C]**||**[25/50°C]**<br>**[25/75°C]**<br>**[25/85°C]**|**[25/100°C]**|**[25°C]**|
||**(Ω)**||**(K)**<br>**(K)**<br>**(K)**|**(K)**|**(mA)**<br>**(°C)**|
|NTCG063JF103FTBA|10,000|+/–1%|3380<br>3422<br>3435|3453|+/–1%<br>0.31<br>–40 to 125|
|NTCG063JF103FTB|10,000|+/–1%|3380<br>3422<br>3435|3453|+/–1%<br>0.31<br>–40 to 125|
|NTCG063JF103HTBA|10,000|+/–3%|3380<br>3422<br>3435|3453|+/–1%<br>0.31<br>–40 to 125|
|NTCG063JF103HTB|10,000|+/–3%|3380<br>3422<br>3435|3453|+/–1%<br>0.31<br>–40 to 125|
|NTCG063JF103JTB|10,000|+/–5%|3380<br>3422<br>3435|3453|+/–1%<br>0.31<br>–40 to 125|
|NTCG063JH103HTBA|10,000|+/–3%|3380<br>3422<br>3435|3453|+/–3%<br>0.31<br>–40 to 125|
|NTCG063JH103HTB|10,000|+/–3%|3380<br>3422<br>3435|3453|+/–3%<br>0.31<br>–40 to 125|
|NTCG063JH103JTBA|10,000|+/–5%|3380<br>3422<br>3435|3453|+/–3%<br>0.31<br>–40 to 125|
|NTCG063JH103JTB|10,000|+/–5%|3380<br>3422<br>3435|3453|+/–3%<br>0.31<br>–40 to 125|
|NTCG063UH103HTBX|10,000|+/–3%|3900<br>3934<br>3950|3971|+/–3%<br>0.31<br>–40 to 125|
|NTCG064BH103HTB|10,000|+/–3%|4067<br>4092<br>4100|4110|+/–3%<br>0.31<br>–40 to 125|
|NTCG064BH103JTB|10,000|+/–5%|4067<br>4092<br>4100|4110|+/–3%<br>0.31<br>–40 to 125|
|NTCG063JF223HTBXA|22,000|+/–3%|3380<br>3422<br>3435|3453|+/–1%<br>0.21<br>–40 to 125|
|NTCG063JF223HTBX|22,000|+/–3%|3380<br>3422<br>3435|3453|+/–1%<br>0.21<br>–40 to 125|
|NTCG064BF473FTBX|47,000|+/–1%|4050<br>4098<br>4114|4137|+/–1%<br>0.14<br>–40 to 125|
|NTCG064BF473HTBX|47,000|+/–3%|4050<br>4098<br>4114|4137|+/–1%<br>0.14<br>–40 to 125|
|NTCG064BF473JTBX|47,000|+/–5%|4050<br>4098<br>4114|4137|+/–1%<br>0.14<br>–40 to 125|
|NTCG064EF683FTBX|68,000|+/–1%|4250<br>4293<br>4308|4327|+/–1%<br>0.12<br>–40 to 125|
|NTCG064EF683JTBX|68,000|+/–5%|4250<br>4293<br>4308|4327|+/–1%<br>0.12<br>–40 to 125|
|NTCG064EF104FTBX|100,000|+/–1%|4250<br>4293<br>4308|4327|+/–1%<br>0.10<br>–40 to 125|
|NTCG064EF104HTBX|100,000|+/–3%|4250<br>4293<br>4308|4327|+/–1%<br>0.10<br>–40 to 125|
|NTCG064EF104JTBX|100,000|+/–5%|4250<br>4293<br>4308|4327|+/–1%<br>0.10<br>–40 to 125|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. ~~Re~~ Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(8/20) 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

## NTC thermistors 

## Commercial grade 

## **NTCG series 1005 type** 

## **■SHAPE & DIMENSIONS** 

## **■RECOMMENDED LAND PATTERN** 

**==> picture [111 x 151] intentionally omitted <==**

**----- Start of picture text -----**<br>
1±0.05<br>0.1 min.<br>Dimensions in mm<br>0.5±0.05<br>0.5±0.05<br>**----- End of picture text -----**<br>


**==> picture [130 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.35 to 0.45 0.3 to 0.5 0.35 to 0.45<br>Dimensions in mm<br>0.4 to 0.6<br>**----- End of picture text -----**<br>


## **■JIS 1005 [EIA 0402] (22 to 15kΩ : Operating temperature range : –40 to 125°C)** 

|**Part No.**|**Resistance**|**Resistance**|**B constant**|**B constant**|**B constant**<br>**B constant**<br>**B constant**|**Permissible**|**Operating**|
|---|---|---|---|---|---|---|---|
||**value**|**tolerance**|||**tolerance**|**operating**|**temperature**|
|||||||**current**|**range**|
||**[25°C]**||**[25/50°C]**|**[25/75°C]**|**[25/85°C]**<br>**[25/100°C]**|**[25°C]**||
||**(Ω)**||**(K)**|**(K)**|**(K)**<br>**(K)**|**(mA)**|**(°C)**|
|NTCG103EH220JT1|22|+/–5%|3244|3249|3250<br>3251<br>+/–3%|6.70|–40 to 125|
|NTCG103EH300JT1|30|+/–5%|3244|3249|3250<br>3251<br>+/–3%|5.70|–40 to 125|
|NTCG103EH400HT1|40|+/–3%|3244|3249|3250<br>3251<br>+/–3%|5.00|–40 to 125|
|NTCG103EH400JT1|40|+/–5%|3244|3249|3250<br>3251<br>+/–3%|5.00|–40 to 125|
|NTCG103EH470JT1|47|+/–5%|3244|3249|3250<br>3251<br>+/–3%|4.61|–40 to 125|
|NTCG103EH101HT1|100|+/–3%|3244|3249|3250<br>3251<br>+/–3%|3.10|–40 to 125|
|NTCG103EH101JT1|100|+/–5%|3244|3249|3250<br>3251<br>+/–3%|3.10|–40 to 125|
|NTCG103NH471JT1|470|+/–5%|3642|3649|3650<br>3650<br>+/–3%|1.40|–40 to 125|
|NTCG103NH681JT1|680|+/–5%|3642|3649|3650<br>3650<br>+/–3%|1.20|–40 to 125|
|NTCG104BH102HT1|1,000|+/–3%|4096|4100|4100<br>4100<br>+/–3%|1.00|–40 to 125|
|NTCG104BH102JT1|1,000|+/–5%|4096|4100|4100<br>4100<br>+/–3%|1.00|–40 to 125|
|NTCG104BH152JT1|1,500|+/–5%|4096|4100|4100<br>4100<br>+/–3%|0.81|–40 to 125|
|NTCG104BH222JT1|2,200|+/–5%|4096|4100|4100<br>4100<br>+/–3%|0.67|–40 to 125|
|NTCG104BH332JT1|3,300|+/–5%|4067|4092|4100<br>4110<br>+/–3%|0.55|–40 to 125|
|NTCG103LH472JT1|4,700|+/–5%|3500|3532|3545<br>3564<br>+/–3%|0.46|–40 to 125|
|NTCG104BH472HT1|4,700|+/–3%|4067|4092|4100<br>4110<br>+/–3%|0.46|–40 to 125|
|NTCG104BH472JT1|4,700|+/–5%|4067|4092|4100<br>4110<br>+/–3%|0.46|–40 to 125|
|NTCG104BH682JT1|6,800|+/–5%|4067|4092|4100<br>4110<br>+/–3%|0.38|–40 to 125|
|NTCG103JF103FT1A|10,000|+/–1%|3380|3422|3435<br>3453<br>+/–1%|0.31|–40 to 125|
|NTCG103JF103FT1|10,000|+/–1%|3380|3422|3435<br>3453<br>+/–1%|0.31|–40 to 125|
|NTCG103JF103HT1A|10,000|+/–3%|3380|3422|3435<br>3453<br>+/–1%|0.31|–40 to 125|
|NTCG103JF103HT1|10,000|+/–3%|3380|3422|3435<br>3453<br>+/–1%|0.31|–40 to 125|
|NTCG103JF103JT1|10,000|+/–5%|3380|3422|3435<br>3453<br>+/–1%|0.31|–40 to 125|
|NTCG103JH103HT1A|10,000|+/–3%|3380|3422|3435<br>3453<br>+/–3%|0.31|–40 to 125|
|NTCG103JH103HT1|10,000|+/–3%|3380|3422|3435<br>3453<br>+/–3%|0.31|–40 to 125|
|NTCG103JH103JT1A|10,000|+/–5%|3380|3422|3435<br>3453<br>+/–3%|0.31|–40 to 125|
|NTCG103JH103JT1|10,000|+/–5%|3380|3422|3435<br>3453<br>+/–3%|0.31|–40 to 125|
|NTCG103JX103DT1|10,000|+/–0.5%|3380|3422|3435<br>3453<br>+/–0.7%|0.31|–40 to 125|
|NTCG103UH103HT1|10,000|+/–3%|3900|3934|3950<br>3971<br>+/–3%|0.31|–40 to 125|
|NTCG103UH103JT1|10,000|+/–5%|3900|3934|3950<br>3971<br>+/–3%|0.31|–40 to 125|
|NTCG104BH103HT1|10,000|+/–3%|4067|4092|4100<br>4110<br>+/–3%|0.31|–40 to 125|
|NTCG104BH103JT1|10,000|+/–5%|4067|4092|4100<br>4110<br>+/–3%|0.31|–40 to 125|
|NTCG104BH153HT1|15,000|+/–3%|4067|4092|4100<br>4110<br>+/–3%|0.25|–40 to 125|
|NTCG104BH153JT1|15,000|+/–5%|4067|4092|4100<br>4110<br>+/–3%|0.25|–40 to 125|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. ~~re~~ Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(9/20) 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

## NTC thermistors 

## Commercial grade 

## **NTCG series 1005 type** 

## **■SHAPE & DIMENSIONS** 

## **■RECOMMENDED LAND PATTERN** 

**==> picture [111 x 151] intentionally omitted <==**

**----- Start of picture text -----**<br>
1±0.05<br>0.1 min.<br>Dimensions in mm<br>0.5±0.05<br>0.5±0.05<br>**----- End of picture text -----**<br>


**==> picture [130 x 70] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.35 to 0.45 0.3 to 0.5 0.35 to 0.45<br>Dimensions in mm<br>0.4 to 0.6<br>**----- End of picture text -----**<br>


## **■JIS 1005 [EIA 0402] (22K to 1,000kΩ : Operating temperature range : –40 to 125°C)** 

|**Part No.**<br>**Resistance**|**Resistance**<br>**B constant**<br>**B constant**<br>**B constant**|**B constant**|**B constant**|**Permissible**|**Operating**|
|---|---|---|---|---|---|
|**value**|**tolerance**||**tolerance**|**operating**|**temperature**|
|||||**current**|**range**|
|**[25°C]**|**[25/50°C]**<br>**[25/75°C]**<br>**[25/85°C]**|**[25/100°C]**||**[25°C]**||
|**(W)**|**(K)**<br>**(K)**<br>**(K)**|**(K)**||**(mA)**|**(°C)**|
|NTCG104LH223HT1<br>22,000|+/–3%<br>4485<br>4533<br>4550|4573|+/–3%|0.21|–40 to 125|
|NTCG104LH223JT1<br>22,000|+/–5%<br>4485<br>4533<br>4550|4573|+/–3%|0.21|–40 to 125|
|NTCG104LH333JT1<br>33,000|+/–5%<br>4485<br>4533<br>4550|4573|+/–3%|0.17|–40 to 125|
|NTCG104BF473FT1X<br>47,000|+/–1%<br>4050<br>4098<br>4114|4137|+/–1%|0.14|–40 to 125|
|NTCG104BF473HT1X<br>47,000|+/–3%<br>4050<br>4098<br>4114|4137|+/–1%|0.14|–40 to 125|
|NTCG104BF473JT1X<br>47,000|+/–5%<br>4050<br>4098<br>4114|4137|+/–1%|0.14|–40 to 125|
|NTCG104LH473HT1<br>47,000|+/–3%<br>4485<br>4533<br>4550|4573|+/–3%|0.14|–40 to 125|
|NTCG104LH473JT1<br>47,000|+/–5%<br>4485<br>4533<br>4550|4573|+/–3%|0.14|–40 to 125|
|NTCG104BF683FT1X<br>68,000|+/–1%<br>4085<br>4134<br>4150|4172|+/–1%|0.12|–40 to 125|
|NTCG104BF683HT1X<br>68,000|+/–3%<br>4085<br>4134<br>4150|4172|+/–1%|0.12|–40 to 125|
|NTCG104BF683JT1X<br>68,000|+/–5%<br>4085<br>4134<br>4150|4172|+/–1%|0.12|–40 to 125|
|NTCG104LH683HT1<br>68,000|+/–3%<br>4485<br>4533<br>4550|4573|+/–3%|0.12|–40 to 125|
|NTCG104LH683JT1<br>68,000|+/–5%<br>4485<br>4533<br>4550|4573|+/–3%|0.12|–40 to 125|
|NTCG104ED104DT1X<br>100,000|+/–0.5%<br>4250<br>4293<br>4308|4327|+/–0.5%|0.10|–40 to 125|
|NTCG104EF104FT1X<br>100,000|+/–1%<br>4250<br>4293<br>4308|4327|+/–1%|0.10|–40 to 125|
|NTCG104EF104HT1X<br>100,000|+/–3%<br>4250<br>4293<br>4308|4327|+/–1%|0.10|–40 to 125|
|NTCG104EH104HT1X<br>100,000|+/–3%<br>4250<br>4293<br>4308|4327|+/–3%|0.10|–40 to 125|
|NTCG104KF104FT1<br>100,000|+/–1%<br>4419<br>4468<br>4485|4508|+/–1%|0.10|–40 to 125|
|NTCG104KF104HT1<br>100,000|+/–3%<br>4419<br>4468<br>4485|4508|+/–1%|0.10|–40 to 125|
|NTCG104LH104HT1<br>100,000|+/–3%<br>4485<br>4533<br>4550|4573|+/–3%|0.10|–40 to 125|
|NTCG104LH104JT1<br>100,000|+/–5%<br>4485<br>4533<br>4550|4573|+/–3%|0.10|–40 to 125|
|NTCG104LH154JT1<br>150,000|+/–5%<br>4485<br>4533<br>4550|4573|+/–3%|0.08|–40 to 125|
|NTCG104QH224HT1<br>220,000|+/–3%<br>4661<br>4728<br>4750|4780|+/–3%|0.06|–40 to 125|
|NTCG104QH224JT1<br>220,000|+/–5%<br>4661<br>4728<br>4750|4780|+/–3%|0.06|–40 to 125|
|NTCG104QH334HT1<br>330,000|+/–3%<br>4661<br>4728<br>4750|4780|+/–3%|0.05|–40 to 125|
|NTCG104QH334JT1<br>330,000|+/–5%<br>4661<br>4728<br>4750|4780|+/–3%|0.05|–40 to 125|
|NTCG104QH474HT1<br>470,000|+/–3%<br>4661<br>4728<br>4750|4780|+/–3%|0.04|–40 to 125|
|NTCG104QH474JT1<br>470,000|+/–5%<br>4661<br>4728<br>4750|4780|+/–3%|0.04|–40 to 125|
|NTCG104QH105HT1<br>1,000,000|+/–3%<br>4661<br>4728<br>4750|4780|+/–3%|0.03|–40 to 125|
|NTCG104QH105JT1<br>1,000,000|+/–5%<br>4661<br>4728<br>4750|4780|+/–3%|0.03|–40 to 125|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. ~~——~~ Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(10/20) 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

## NTC thermistors 

## Commercial grade 

## **NTCG series 1608 type** 

## **■SHAPE & DIMENSIONS** 

## **■RECOMMENDED LAND PATTERN** 

**==> picture [111 x 151] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.6±0.1<br>0.2 min.<br>tt<br>Dimensions in mm<br>0.8±0.1<br>0.8±0.1<br>**----- End of picture text -----**<br>


**==> picture [126 x 62] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.6 to 0.8 0.6 to 0.8 0.6 to 0.8<br>Dimensions in mm<br>0.6 to 0.8<br>**----- End of picture text -----**<br>


## **■JIS 1608 [EIA 0603] (30 to 10kΩ : Operating temperature range : –40 to 125°C)** 

|**Part No.**|**Resistance**|**Resistance**|**B constant**|**B constant**|**B constant**<br>**B constant**<br>**B constant**|**Permissible**|**Operating**|
|---|---|---|---|---|---|---|---|
||**value**|**tolerance**|||**tolerance**|**operating**|**temperature**|
|||||||**current**|**range**|
||**[25°C]**||**[25/50°C]**|**[25/75°C]**|**[25/85°C]**<br>**[25/100°C]**|**[25°C]**||
||**(Ω)**||**(K)**|**(K)**|**(K)**<br>**(K)**|**(mA)**|**(°C)**|
|NTCG163EH300JT1|30|+/–5%|3244|3249|3250<br>3251<br>+/–3%|5.70|–40 to 125|
|NTCG163EH400HT1|40|+/–3%|3244|3249|3250<br>3251<br>+/–3%|5.00|–40 to 125|
|NTCG163EH400JT1|40|+/–5%|3244|3249|3250<br>3251<br>+/–3%|5.00|–40 to 125|
|NTCG163EH101HT1|100|+/–3%|3244|3249|3250<br>3251<br>+/–3%|3.10|–40 to 125|
|NTCG163EH101JT1|100|+/–5%|3244|3249|3250<br>3251<br>+/–3%|3.10|–40 to 125|
|NTCG163EH151JT1|150|+/–5%|3244|3249|3250<br>3251<br>+/–3%|2.50|–40 to 125|
|NTCG163NH221JT1|220|+/–5%|3642|3649|3650<br>3650<br>+/–3%|2.10|–40 to 125|
|NTCG163NH331JT1|330|+/–5%|3642|3649|3650<br>3650<br>+/–3%|1.70|–40 to 125|
|NTCG163NH471JT1|470|+/–5%|3642|3649|3650<br>3650<br>+/–3%|1.40|–40 to 125|
|NTCG164BH102HT1|1,000|+/–3%|4096|4100|4100<br>4100<br>+/–3%|1.00|–40 to 125|
|NTCG164BH102JT1|1,000|+/–5%|4096|4100|4100<br>4100<br>+/–3%|1.00|–40 to 125|
|NTCG164BH222JT1|2,200|+/–5%|4096|4100|4100<br>4100<br>+/–3%|0.67|–40 to 125|
|NTCG164BH302JT1|3,000|+/–5%|4067|4100|4100<br>4110<br>+/–3%|0.57|–40 to 125|
|NTCG164BH332HT1|3,300|+/–3%|4067|4092|4100<br>4110<br>+/–3%|0.55|–40 to 125|
|NTCG164BH332JT1|3,300|+/–5%|4067|4092|4100<br>4110<br>+/–3%|0.55|–40 to 125|
|NTCG164BH472HT1|4,700|+/–3%|4067|4092|4100<br>4110<br>+/–3%|0.46|–40 to 125|
|NTCG164BH472JT1|4,700|+/–5%|4067|4092|4100<br>4110<br>+/–3%|0.46|–40 to 125|
|NTCG164BH682JT1|6,800|+/–5%|4067|4092|4100<br>4110<br>+/–3%|0.38|–40 to 125|
|NTCG163JF103FT1A|10,000|+/–1%|3380|3422|3435<br>3453<br>+/–1%|0.31|–40 to 125|
|NTCG163JF103FT1|10,000|+/–1%|3380|3422|3435<br>3453<br>+/–1%|0.31|–40 to 125|
|NTCG163JF103HT1A|10,000|+/–3%|3380|3422|3435<br>3453<br>+/–1%|0.31|–40 to 125|
|NTCG163JF103HT1|10,000|+/–3%|3380|3422|3435<br>3453<br>+/–1%|0.31|–40 to 125|
|NTCG163JH103HT1A|10,000|+/–3%|3380|3422|3435<br>3453<br>+/–3%|0.31|–40 to 125|
|NTCG163JH103HT1|10,000|+/–3%|3380|3422|3435<br>3453<br>+/–3%|0.31|–40 to 125|
|NTCG163JH103JT1A|10,000|+/–5%|3380|3422|3435<br>3453<br>+/–3%|0.31|–40 to 125|
|NTCG163JH103JT1|10,000|+/–5%|3380|3422|3435<br>3453<br>+/–3%|0.31|–40 to 125|
|NTCG164BF103HT1|10,000|+/–3%|4037|4092|4070<br>4080<br>+/–1%|0.31|–40 to 125|
|NTCG164BH103HT1|10,000|+/–3%|4067|4092|4100<br>4110<br>+/–3%|0.31|–40 to 125|
|NTCG164BH103JT1|10,000|+/–5%|4067|4092|4100<br>4110<br>+/–3%|0.31|–40 to 125|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(11/20) 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

## NTC thermistors 

## Commercial grade 

## **NTCG series 1608 type** 

## **■SHAPE & DIMENSIONS** 

## **■RECOMMENDED LAND PATTERN** 

**==> picture [111 x 151] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.6±0.1<br>0.2 min.<br>Lt<br>Dimensions in mm<br>0.8±0.1<br>0.8±0.1<br>**----- End of picture text -----**<br>


**==> picture [126 x 62] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.6 to 0.8 0.6 to 0.8 0.6 to 0.8<br>Dimensions in mm<br>0.6 to 0.8<br>**----- End of picture text -----**<br>


## **■JIS 1608 [EIA 0603] (15k to 1,000kΩ : Operating temperature range : –40 to 125°C)** 

|**Part No.**<br>**Resistance**|**Resistance**|**B constant**|**B constant**<br>**B constant**<br>**B constant**<br>**B constant**|**Permissible**|**Operating**|
|---|---|---|---|---|---|
|**value**|**tolerance**||**tolerance**|**operating**|**temperature**|
|||||**current**|**range**|
|**[25°C]**||**[25/50°C]**|**[25/75°C]**<br>**[25/85°C]**<br>**[25/100°C]**|**[25°C]**||
|**(Ω)**||**(K)**|**(K)**<br>**(K)**<br>**(K)**|**(mA)**|**(°C)**|
|NTCG164BH153JT1<br>15,000|+/–5%|4067|4092<br>4100<br>4110<br>+/–3%|0.25|–40 to 125|
|NTCG164LH223HT1<br>22,000|+/–3%|4485|4533<br>4550<br>4573<br>+/–3%|0.21|–40 to 125|
|NTCG164LH223JT1<br>22,000|+/–5%|4485|4533<br>4550<br>4573<br>+/–3%|0.21|–40 to 125|
|NTCG164LH333JT1<br>33,000|+/–5%|4485|4533<br>4550<br>4573<br>+/–3%|0.17|–40 to 125|
|NTCG164LH473HT1<br>47,000|+/–3%|4485|4533<br>4550<br>4573<br>+/–3%|0.14|–40 to 125|
|NTCG164LH473JT1<br>47,000|+/–5%|4485|4533<br>4550<br>4573<br>+/–3%|0.14|–40 to 125|
|NTCG164LH683HT1<br>68,000|+/–3%|4485|4533<br>4550<br>4573<br>+/–3%|0.12|–40 to 125|
|NTCG164LH683JT1<br>68,000|+/–5%|4485|4533<br>4550<br>4573<br>+/–3%|0.12|–40 to 125|
|NTCG164KF104FT1<br>100,000|+/–1%|4419|4468<br>4485<br>4508<br>+/–1%|0.10|–40 to 125|
|NTCG164LH104HT1<br>100,000|+/–3%|4485|4533<br>4550<br>4573<br>+/–3%|0.10|–40 to 125|
|NTCG164LH104JT1<br>100,000|+/–5%|4485|4533<br>4550<br>4573<br>+/–3%|0.10|–40 to 125|
|NTCG164LH154HT1<br>150,000|+/–3%|4485|4533<br>4550<br>4573<br>+/–3%|0.08|–40 to 125|
|NTCG164LH154JT1<br>150,000|+/–5%|4485|4533<br>4550<br>4573<br>+/–3%|0.08|–40 to 125|
|NTCG164QH224HT1<br>220,000|+/–3%|4661|4728<br>4750<br>4780<br>+/–3%|0.06|–40 to 125|
|NTCG164QH224JT1<br>220,000|+/–5%|4661|4728<br>4750<br>4780<br>+/–3%|0.06|–40 to 125|
|NTCG164QH334JT1<br>330,000|+/–5%|4661|4728<br>4750<br>4780<br>+/–3%|0.05|–40 to 125|
|NTCG164QH474HT1<br>470,000|+/–3%|4661|4728<br>4750<br>4780<br>+/–3%|0.04|–40 to 125|
|NTCG164QH474JT1<br>470,000|+/–5%|4661|4728<br>4750<br>4780<br>+/–3%|0.04|–40 to 125|
|NTCG164QH105HT1<br>1,000,000|+/–3%|4661|4728<br>4750<br>4780<br>+/–3%|0.03|–40 to 125|
|NTCG164QH105JT1<br>1,000,000|+/–5%|4661|4728<br>4750<br>4780<br>+/–3%|0.03|–40 to 125|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(12/20) 

## NTC thermistors 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

## Commercial grade 

## **NTCG series 2012 type** 

## **■SHAPE & DIMENSIONS** 

## **■RECOMMENDED LAND PATTERN** 

**==> picture [350 x 151] intentionally omitted <==**

**----- Start of picture text -----**<br>
2±0.2<br>0.7 to 0.9 0.9 to 1.2 0.7 to 0.9<br>Dimensions in mm<br>0.2 min.<br>Dimensions in mm<br>0.9 to 1.2<br>1.25±0.2<br>0.7±0.2<br>**----- End of picture text -----**<br>


## **■JIS 2012 [EIA 0805] (Operating temperature range : –40 to 125°C)** 

|**Part No.**<br>**Resistance**|**Resistance**<br>**B constant**|**B constant**|**B constant**|**B constant**|**B constant**|**Permissible**|**Operating**|
|---|---|---|---|---|---|---|---|
|**value**|**tolerance**||||**tolerance**|**operating**|**temperature**|
|||||||**current**|**range**|
|**[25°C]**|**[25/50°C]**|**[25/75°C]**|**[25/85°C]**|**[25/100°C]**||**[25°C]**||
|**(Ω)**|**(K)**|**(K)**|**(K)**|**(K)**||**(mA)**|**(°C)**|
|NTCG203NH103JT1<br>10,000|+/–5%<br>3590|3635|3650|3670|+/–3%|0.44|–40 to 125|
|NTCG204AH473JT1<br>47,000|+/–5%<br>3931|3982|4000|4023|+/–3%|0.20|–40 to 125|
|NTCG204CH104JT1<br>100,000|+/–5%<br>4085|4134|4150|4172|+/–3%|0.14|–40 to 125|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(13/20) 

## NTC thermistors 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

## Commercial grade 

## **NTCG series RT table** 

## **■R-T TABLE ACQUISITION PROCEDURE** 

1. Access the top page of the TDK chip NTC thermistor (protective device) 

https://product.tdk.com/en/products/sensor/ntc/chip-ntc-thermistor/index.html 

## 2. Click [Search by Part No.] 

https://product.tdk.com/en/search/sensor/ntc/chip-ntc-thermistor/part_no 

## 3. Enter the product name you want in the RT table in the box and click the Search button. 

## ( Example：NTCG103JF103FT1 ) 

**==> picture [47 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
NTCG103JF103FT1<br>**----- End of picture text -----**<br>


**==> picture [65 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
Search<br>Enable the real time search<br>**----- End of picture text -----**<br>


## **Wildcard and Multiple Part number.** 

Question mark (?) and asterisk (*) can be used as wildcard characters. The question mark (?) matches any single character, and the asterisk (*) matches any sequence of characters. Enter only one part number per line. Up to 50 part numbers can be searched simultaneously. 

A part number search is normally performed using a prefix search. If you wish to use a suffix search, enter an exclamation mark (!) at the end of the Part No. 

4. Click the displayed product name. 

## ( Example：NTCG103JF103FT1 ) 

|Catalog /<br>Data<br>Sheet<br>Images<br>Check<br>e|Part No.<br>.?)||Distributor<br>Inventory|Brand|Apps.|Feature||
|---|---|---|---|---|---|---|---|
|a|=) lL]|||~~ii~~||i)|~~ei~~||
|125°C<br>UL<br>150°C<br>AEC-Q200<br>TDK<br>Buy Now<br>TDK<br>Buy Now<br>NTCG103JF103FT1S<br>NTCG103JF103FT1<br>New<br>o2 6~~aim~~<br>~~3S~~<br>~~cose~~<br>~~= omSE~~||||||||
|5. Individual pages are displayed and click the RT table in the "Document" on the right side bar.||||5. Individual pages are displayed and click the RT table in the "Document" on the right side bar.|||5. Individual pages are displayed and click the RT table in the "Document" on the right side bar.|
|**Documents**||||||||
|Catalog||||||||
|RoHS Certificate||||||||
|SVHC/REACH Certificate||||||||
|Selection Guide||||||||
|RT Sheet||||||||



5. Individual pages are displayed and click the RT table in the "Document" on the right side bar. 

6. You can download the csv file in the 1°C step of the RT table for the product. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(14/20) 

## NTC thermistors 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

Commercial grade 

## **Attention in the board design** 

## **■BOARD DESIGN** 

When attached to NTC substrate thermistor, amount of silver used (fillet size) has direct impact on NTC thermistor after mounting. Thus, sufficient consideration is necessary. 

## **Set of land dimensions** 

- (1) As the stress rises in the NTC thermistor owing to the increase in silver, breakage and cracks will occur. Cause including crack, as caution on board land design, configure the shape and dimensions so that the amount of silver is appropriate. 

If you installed 2 or more parts in the Common Land, separated by a solder resist and special land of each component. 

- (2) When peak levels panning-at soldering is excessive, by solder contraction stress, mechanical-thermal stress causes a Yasuku chip crack. 

   - In addition, when the peak level is underestimated, terminal electrode fixed strength is insufficient. This causes chip dropouts and may affect circuit reliability. Representative example of the panning of peak levels is shown in the following. 

## **Recommended silver dose** 

**==> picture [248 x 111] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|Solder stress is increased,|
|Solder volume|
|and it is easy for a crack to|
|overload|
|form.|
|A|
|Most large serving amount|
|Decent solder|
|Minimum prime amount|
|volume|
|A|L|I|X|
|Fixed strength is weak, and|
|Solder volume|
|there is connection a|
|deficit|
|ai|m|e|problem and risk of loss.|

**----- End of picture text -----**<br>


## **Case and suggested protocol want to avoid** 

**==> picture [249 x 267] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|Improvement example|
|Example|Cases to avoid|
|(land division)|
|Leads|Leads|
|Lead wire and|Chip|Solder|
|Solder resist|
|land of part|
|discrete doubles|
|up|
|PCB|
|fat,|aici|
|Chassis|Solder|Solder resist|
|(ground solder)|
|Arrangements in|
|the vicinity|
|L2|
|L1|L2>L1|
|—_|
|Land|
|Arrangements of|
|chip|
|component\qs|=e|
|companion|Excess solder|Solder resist|
|Land|
|LED,|Missing solder|EET|.|

**----- End of picture text -----**<br>


Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(15/20) 

## NTC thermistors 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

## Commercial grade 

## **Attention in the board design** 

## **Arrangements of components** 

- (1) I was based on camber of substrate and suggested protocol of NTC thermistor arrangement, as stress does not join to the utmost is shown in following. 

- (2) In payment near by board, depending on mount position of NTC PTC, as mechanical stress varies, please refer to the following diagram. 

**==> picture [251 x 97] intentionally omitted <==**

**----- Start of picture text -----**<br>
Substrate for flexural stressSubstrate for flexural stress<br>Adverse events Good example<br>Perforation or slit Perforation or slit<br>Y| Y|<br>Direction of<br>surface solder<br>C7 w/e<br>Solder the mountain fold as Solder the mountain fold as<br>a top. a bottom.<br>**----- End of picture text -----**<br>


Perforation or slit Perforation or slit Chip arrangements (direction) C ~~e~~ ] Do Mounted vertically to the Mounted horizontally to the perforation and slit. perforation and slit. 

**==> picture [152 x 76] intentionally omitted <==**

**----- Start of picture text -----**<br>
E D<br>o a<br>Perforation C<br>O000\ Co)O<br>B<br>A<br>f l<br>Slit<br>**----- End of picture text -----**<br>


The order of A > B = C > D > E eases the stress. 

**==> picture [251 x 92] intentionally omitted <==**

**----- Start of picture text -----**<br>
L1 L2<br>Distance from<br>perforation<br>and slit<br>portion (L1<L2) (L1<L2)<br>Close location is  It is an advantage so distant<br>disadvantageous of  location away places the<br>perforation and slit. perforation and slit.<br>**----- End of picture text -----**<br>


Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(16/20) 

## NTC thermistors 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

Commercial grade 

## **Attention on the mounting** 

## **APPLICATION TO BOARD** 

## **Mounting head pressure** 

Under suction nozzle if dead point too, during implementation, excessive force joins of NTC thermistor low, as cause causes of crack, please use with reference to something about following. 

- 1) Being set to top surface of substrate so that under suction nozzle as for dead center, substrate does not bend back, and adjust, please. 

- 2) Nozzle pressure at implementation is 1N to 3N in static load, please. 

- 3) Substrate fixes up back surface of substrate with support pin in impact of suction nozzle to wely deflection to the utmost, and substrate hold deflection, please. A representative example is shown in the following. 

## **Reflow temperature profile** 

**==> picture [197 x 150] intentionally omitted <==**

**----- Start of picture text -----**<br>
Preheating Soldering Natural<br>cooling<br>Peak<br>T4<br>T3 T3<br>T2 t3<br>T1<br>t1 t2<br>t: Time<br> Temperature<br>T:<br>**----- End of picture text -----**<br>


**==> picture [276 x 142] intentionally omitted <==**

**----- Start of picture text -----**<br>
Cases to avoid Recommended case<br>Single- Crack<br>sided<br>mounting<br>a<br>Support pin<br>Double-<br>sided<br>cyycles<br>mounting<br>Ee Solder peeling Crack Ver Support pin<br>**----- End of picture text -----**<br>


**Specification Item For eutectic mixture For lead-free solder solder** Preheating temperature 160 ～ 180 ℃ 150 ～ 180 ℃ Solder melting temperature 200 ℃ 230 ℃ Maximum temperature 240°C max． 260 ℃ max. Preheating time 100s max. 120s max. Time to reach higher than the 30s max. 40s max. solder melting temperature number of possible reflow 2 max. 2 max. cyycles 

## **SOLDERING IRON** 

Mechanical shock that, if positioning your nail to wear, ragged edge of positionings, participates in NTC thermistor are locally, and NTC thermistor, as there is possibility of crack generated, cut the closed positioning, and maintenance and inspection, and, exchange of manage dimensions and position nail periodically, please. 

- (1) The tip temperature and also by (1)types of soldering irons, the size of the substrate, and the geometry of the land pattern.Being earlier, but when as there is possibility that crack occurs in the heat anderson impaction, point soldering iron temperature is high, please do solder work within the following conditions. 

|**Shape**<br>**(mm)**|**Shape**<br>**(mm)**|**Temperat**<br>**ure of**<br>**iron tips**<br>**(°C)**|**Wattage**<br>**(W)**|**Pallet**<br>**point**<br>**shape**<br>**(mm)**|**Soldering**<br>**time**<br>**(Second)**|**Number of times**|
|---|---|---|---|---|---|---|
|||||||Within each|
|0402||300max.|20max.|o3.0max.<br>3 max.||terminal<br>once(Within total|
|||||||of twice)|
|0603||||||Within each|
|0402<br>1608<br>2012||350max.|20max.|o3.0max.<br>5 max.||terminal<br>once(Within total<br>of twice)|



## **SOLDERING** 

Significant impact is possible on the performance of NTC thermistor, flux checks something about follow, please use. 

- (1) Flux uses one with 0.1wt % (Cl conversion)or less halide substance contains amounts, please. In addition, do not do this with strongly acidic objects. 

- (2) Flux during is soldered (2)NTC substrate thermistor is applied the smalleset amount necessary, please. 

- (3) If Used soluble flux, perform thorough wash particularly, please. 

- (2) Direct iron tip is in contact with the (2) NTC thermistor body, and the strain owing to thermal shock in particular grows even if a crack is generated. Therefore, please do not touch it directly to the terminal electrodes. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(17/20) 

## NTC thermistors 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

Commercial grade 

## **Attention after mounting** 

## **CLEANING** 

- (1) If cleaning liquid is inappropriate, residues and other foreign body of fluxes builds up on NTC PTC surface, and can degrade the performance of NTC thermistor (particularly the insulation resistance). 

- (2) Wash conditions may compromise performance of NTC thermistor if they are improper (wash due, wash excess). 

## **2-1) For wash due** 

- (a) By substance of a system in flux residue halide, metal including terminal electrodes may experience corrosion. 

- (b) Substance of a system in flux residue halide builds up on NTC PTC surface, and reduces the insulation resistance. 

- (c) Soluble flux makes comparisons of colophony series flux, and there is event with trends of significant (1) and(2). 

## **2-2) For excess wash** 

- (1) Owing to lavage, NTC PTC surface deteriorates, and reduces performance of NTC thermistor. 

- (2) In ultrasonography, when output is passed, substrate resonates size, and crack occurs in body and sprang of NTC thermistor in vibration of substrate. Since this may reduce the strength of the terminal electrode, please note the following conditions. 

   - Ultrasound output ： 20W/liter or less Ultrasound frequency ： 40kHz or less Cleaning time ： 5minutes or less 

- 2-3) Concentration including halogen that when cleaning liquid to pollution, when you released is higher, and may cause similar of results into wash due. 

- (2) During each substrate operational check, push pressure with contact failure of check pin of boards checkers of check pin may be toned up to be prevented. As substrate is bent under loading, NTC thermistor is broken owing to stress. There is also the possibility that solder on the terminal electrode will peel off. Follow the diagram for reference, and check that the substrate bends, please. 

**Item Cases to avoid Recommended case** x Peeling Support pin ‘NX Substrate sags _A ~~D~~ IR ss ~~L_areoa~~ Check pin Check pin ~~i~~ 

## **SINGLE-PART COMPONENT HANDLING** 

- (1) To drop impact, as there is possibility that breakage and crack is entered, do not NTC thermistor that(1)NTC thermistor falls. 

Crack Floor 

- (2) At stacking storage after implementation and treatment of substrate, corner of boards is regarded as NTC thermistor. Please be careful, as there is the possibility that breakage and cracks will occur on impact. 

## **SUBSTRATE HANDLING AFTER COMPONENT MOUNTING** 

**==> picture [132 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
Crack<br>Board<br>**----- End of picture text -----**<br>


- (1) When substrate is divided, a flexible so that show in following diagram to substrate, and is given by stress including twist, as there is possibility that crack occurs of NTC thermistor, please check that stress is within acceptable limits. 

**==> picture [141 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Bends Twist<br>**----- End of picture text -----**<br>


Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(18/20) 

## NTC thermistors 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

Commercial grade 

## **Packaging style** 

## **■REEL DIMENSIONS** 

**==> picture [26 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
2.0±0.5<br>**----- End of picture text -----**<br>


**==> picture [180 x 159] intentionally omitted <==**

**----- Start of picture text -----**<br>
|<br>0.8<br>ø13±0.2 9.0max.<br>- 4 ø21±0.8 14.0max.<br>ø180±2.0<br>ø60min.<br>**----- End of picture text -----**<br>


Dimensions in mm 

## **■TAPE DIMENSIONS** 

**==> picture [487 x 180] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||
|---|---|---|---|---|
|160min.|Taping|200min.|
|1.5|[+0.1]|0|2.0±0.05|4.0±0.1|
|Drawing direction|200min.|
|Dimensions in mm|
|Gop|eee|
|A|P1|T|
|‘||Ld|tL|
|Dimensions in mm|
|Type|A|B|P1|T|
|0402|0.26±0.04|0.46±0.04|2±0.05|0.40max.|
|0603|0.38±0.05|0.68±0.05|2±0.05|0.45max.|
|1005|0.65+0.05/-0.1|1.15+0.05/-0.1|2±0.05|0.65max.|
|1608|1.1±0.2|1.9±0.2|4.0±0.1|1.1max.|
|2012|1.6±0.2|2.3±0.2|4.0±0.1|1.1max.|

**----- End of picture text -----**<br>


## **■PACKAGE QUANTITY/INDIVIDUAL WEIGHT** 

**==> picture [418 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Type|Package quantity(pieces/reel)|Individual weight(mg)|
|0402|20,000|0.1|
|0603|15,000|0.3|
|1005|10,000|1.3|
|1608|4,000|5.0|
|2012|2,000|7.2|

**----- End of picture text -----**<br>


Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. ~~Oe—————_~~ Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(19/20) 

## NTC thermistors 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

## Commercial grade 

## **Description and definition of terms** 

## **■INITIAL RESISTANCE** 

Thermistor resistance is a function of absolute temperature as indicated by the following relationship: 

1 1 R=R0 • expB – ............................................................ (1) ( T T0 ) 

Here R0, R(kΩ) are the respective resistance values when the surrounding temperature is T0, T(K). B is the thermistor constant(B constant below). 

## **■B constant** 

The B constant is found from the following equation: 

2.3026(logR–logR0) B= 1 1 ....................................................... (2) T – T0 

This B characteristic is indicated by the slope of the linear plot of log R-1/T inverse absolute temperature. The B constant value is generally in the vicinity of 2500K to 5000K. B constant values of 3000K to 4000K are frequently used for measurements. 

## **Resistance-temperature characteristics (Fig.1)** 

**==> picture [151 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
 Temperature [(] ûC [)]<br>450 400 350 300 250 200 150 100<br>100<br>(TTT TET T yi ttt tet tf<br>20kΩ/200ûC<br>10 SUGKGAP 000000000<br>fF<br>bit iAtT ty yt ty ter<br>3.3kΩ/100ûC<br>1 BOZANRRRRED 40008<br>Cees<br>Hee eee ee<br>BERREC AREER<br>1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3<br>1 10 [3][(] K [)]<br>T<br>)Ω<br>Resistance(k<br>**----- End of picture text -----**<br>


## **■TEMPERATURE COEFFICIENT** 

The relationship between temperature coefficient α and B becomes: 

1 dR B α= • = – ~~ｘ~~ 100(%/°C) ............................................. (3) R dT T[2] 

The negative sign of the temperature coefficient indicates that the temperature coefficient decreases as both thermistor resistance and temperature rise. If B is taken as 3400K, the temperature coefficient found at 20°C (293.15K) becomes –4%/°C. 

## **■HEAT DISSIPATION COEFFICIENT** 

Temperature rises due to thermal energy formed as electrical current flows through the thermistor. The thermistor temperature T0 is then related to the surrounding temperature Ta and the electrical input W: 

W=k(T0–Ta)=V•I(mW)  ............................................................ (4) W k= (mW/°C) .............................................................. (5) T0 –Ta This k value is the heat dissipation coefficient, which represents the additional electrical power (mW/°C) needed to raise the thermistor temperature by 1°C. This heat dissipation coefficient varies with changes in the measurement and environmental conditions. When a thermistor is used for temperature measurement, it is naturally important to lower the applied electrical current as much as possible in order to reduce measurement error resulting from self heating. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en 

(20/20) 

## NTC thermistors 

**RoHS Directive Compliant Product Compatible with lead-free solders** 

Commercial grade 

## **Description and definition of terms** 

## **■VOLTAGE - CURRENT CHARACTERISTIC** 

The voltage - current characteristic indicates the drop in voltage as electrical current through the thermistor is gradually increased. 

## **Voltage-current characteristics (Fig.2)** 

**==> picture [172 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>=eeee<br>OM 5<br>10 4 3<br>2<br>1<br>AA 08 i ee | |<br>1 Zeer<br>Ta=25ûC [(] in still air [)]<br>5kΩ<br>10kΩ<br>20kΩ<br>Pt 3 50kΩ<br>| ll 5 100kΩ<br>0.1 1 10 100<br>Current [(] mA [)]<br>Voltage(V)<br>**----- End of picture text -----**<br>


## **■HEATING TIME CONSTANT** 

The time period required to heat up a thermistor from a certain temperature T0 over a target temperature rise is called the heating time constant. 

Various types of heating time constants are indicated by the symbols shown in Table 1 as determined by the percent change from T0 toward the target temperature. 

The standard change is typically taken to be 63.2%. 

## **Thermal time constants (Fig.3)** 

**==> picture [480 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
70<br>60 T0 Heating Table 1 Heating time constant and temperature change ratio<br>50 Code Rate of change (%) for T0 -Ta<br>Th τ 63.2<br>40 w e a 2τ 86.5<br>Micke] Tc | bb oo 3τ 95.0<br>30 [Ro a 4τ 98.2<br>5τ 99.4<br>20 6τ 99.8<br>Room temperature  Ta Cooling 7τ 99.9<br>10 PSSC CE Ct oO<br>0<br>τ 2τ 3τ 4τ 5τ 6τ 7τ<br>0 0.632<br>(T ×<br>Temperature(ûC) 0 0.368<br>(T ×<br>**----- End of picture text -----**<br>


## **■PERMISSIBLE OPERATING CURRENT** 

This is the maximum load current limit below 1°C temperature rise due to thermistor self-heating. It\qs possible to express it in the following system. 

Maximum allowed current [mA] = √(Heat dissipation constant[mW/°C] ÷ Resistance[Ω] ) 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20240216 / tpd_commercial_ntc-thermistor_ntcg_en