NLV25T-6R8J-PF

INDUCTOR, SIGNAL LINE, 6.8UH, 1005

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: TDK
Product type: Fixed Value Inductors
Inductance:6.8µH; Inductance Tolerance:± 5%; DC Resistance Max:2.7ohm; DC Current Rating:165mA; Q Factor:25; Self Resonant Frequency:39MHz; Q Test Frequency:7.96MHz; Inductor Case Styl

Delivery and price
Units per pack	2000
Price	0.066 €
Current stock	10+
Lead time	30 days

Datasheet

September 2016 

Inductors for Standard Circuits Wound Ferrite 

## **NLV-PF Series** 

## NLV25-PF Type 

**2520 [1008 inch]*** 

*** Dimensions Code JIS[EIA]** 

**NLV25-PF** 

(2/9) 

## **REMINDERS FOR USING THESE PRODUCTS** 

Before using these products, be sure to request the delivery specifications. 

## **SAFETY REMINDERS** 

Please pay sufficient attention to the warnings for safe designing when using these products. 

## **REMINDERS** 

- The storage period is less than 6 months.  Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). 

If the storage period elapses, the soldering of the terminal electrodes may deteriorate. 

Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). 

- Before soldering, be sure to preheat components. 

The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. 

- Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. 

- When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. 

- Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. 

- Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. 

- Use a wrist band to discharge static electricity in your body through the grounding wire. 

- Do not expose the products to magnets or magnetic fields. 

- Do not use for a purpose outside of the contents regulated in the delivery specifications. 

- The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. 

- The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. 

If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. 

- (1) Aerospace/Aviation equipment 

- (8) Public information-processing equipment 

(2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications 

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 

20160909 / inductor_commercial_standard_nlv25-pf_en 

(3/9) 

## **Inductors for Standard Circuits Wound Ferrite** 

**Product compatible with RoHS directive Halogen-free Compatible with lead-free solders** 

## **Overview of NLV25-PF Type** 

## **FEATURES** 

Resin mold type wound inductor for standard circuits. 

E-12 Series, wide lineup compatible with J (±5%) tolerance, can be used for applications that need to meet strict L tolerance such as filter circuits. 

Has excellent inductance temperature characteristics in the operating temperature range. 

## **APPLICATION** 

Smart meters, AV equipment, xDSL, electronic devices for communications infrastructure such as mobile base stations, industrial equipment, other 

## **PART NUMBER CONSTRUCTION** 

|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|NLV<br>25<br>T<br>-<br>010<br>-<br>J<br>-<br>PF<br>**Series name**<br>**L×W×H Dimensions**<br>**Packaging style**<br>**Inductance**<br>**Inductance**<br>**tolerance**<br>**Internal code**<br>**(mm)**<br>**(µH)**<br>~~(1~~<br>~~tt~~<br>~~tse~~|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
||||||25||2.5×2.0×1.8||||T|Taping||010<br>0.01||J<br>±5%|||Compatible with the RoHS||
|||||||||||||||R10<br>0.1||||PF|Directive, Exemption||
|||||||||||||||1R0<br>1|||||regulations apply||
|||||||||||||||100<br>10|||||||
|||||||||||||||101<br>100|||||||



## **OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT** 

|**Type**|**Temperature range**<br>**Operating**<br>**temperature**<br>（**°C**）<br>**Storage**<br>**temperature**<br>（**°C**）|**Temperature range**<br>**Operating**<br>**temperature**<br>（**°C**）<br>**Storage**<br>**temperature**<br>（**°C**）|**Package quantity**<br>**(pieces/reel)**|**Individual weight**<br>（**mg**）|
|---|---|---|---|---|
|**NLV25-PF**|–40 to +105|–40 to +105|2000|25|



>  Operating temperature range includes self-temperature rise. 

>  The Storage temperature range is for after the circuit board is mounted. 

RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_standard_nlv25-pf_en 

(4/9) 

## **NLV25-PF Type** 

## a **RECOMMENDED REFLOW PROFILE** 

**==> picture [262 x 199] intentionally omitted <==**

**----- Start of picture text -----**<br>
Preheating Soldering Natural<br>cooling<br>Peak<br>T4<br>T3 T3<br>T2<br>t3<br>T1<br>t1 t2<br>t: Time<br> Temperature<br>T:<br>**----- End of picture text -----**<br>


|**Preheating**|||**Soldering**||**Peak**||
|---|---|---|---|---|---|---|
|**Temp.**||**Time**|**Temp.**|**Time**|**Temp.**|**Time**|
|**T1**|**T2**|**t1**|**T3**|**t2**|**T4**|**t3**|
|150°C|180°C|90 to 120s|230°C|40s|255°C|10s max.|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_standard_nlv25-pf_en 

(5/9) 

## **NLV25-PF Type** 

## **SHAPE & DIMENSIONS** 

**SHAPE & DIMENSIONS** L 2.5±0.2 ~~i~~ l 0.5 ~~l~~ (0.4) i (1.7) (0.4) ¢ Dimensions in mm | ~~}~~ 

**RECOMMENDED LAND PATTERN** 1.0 1.5 1.0 Dimensions in mm ome ~~)~~ 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_standard_nlv25-pf_en 

(6/9) 

## **NLV25-PF Type** 

## **ELECTRICAL CHARACTERISTICS** 

## a **ELECTRICAL CHARACTERISTICS** ~~SO~~ **CHARACTERISTICS SPECIFICATION TABLE** 

|**L**||**Q**|**L, Q measuring**|**Self-resonant**|**DC resistance**|**Rated current**|**Part No.**|
|---|---|---|---|---|---|---|---|
||||**frequency**|**frequency**||||
|**(µH)**|**Tolerance**|**min.**|**(MHz)**|**(MHz)min.**|**(Ω)max.**|**(mA)max.**||
|0.01|±5%|15|100|2150|0.26|530|NLV25T-010J-PF|
|0.012|±5%|15|100|2050|0.27|500|NLV25T-012J-PF|
|0.015|±5%|15|100|2000|0.29|480|NLV25T-015J-PF|
|0.018|±5%|15|100|1850|0.31|450|NLV25T-018J-PF|
|0.022|±5%|15|100|1650|0.37|420|NLV25T-022J-PF|
|0.027|±5%|15|100|1550|0.4|410|NLV25T-027J-PF|
|0.033|±5%|20|100|1450|0.42|400|NLV25T-033J-PF|
|0.039|±5%|20|100|1350|0.45|380|NLV25T-039J-PF|
|0.047|±5%|20|100|1200|0.5|360|NLV25T-047J-PF|
|0.056|±5%|20|100|1100|0.6|340|NLV25T-056J-PF|
|0.068|±5%|20|100|1050|0.65|320|NLV25T-068J-PF|
|0.082|±5%|20|100|900|0.75|300|NLV25T-082J-PF|
|0.1|±5%|20|100|800|0.8|280|NLV25T-R10J-PF|
|0.12|±5%|30|25.2|700|0.3|550|NLV25T-R12J-PF|
|0.15|±5%|30|25.2|550|0.35|500|NLV25T-R15J-PF|
|0.18|±5%|30|25.2|500|0.4|460|NLV25T-R18J-PF|
|0.22|±5%|30|25.2|450|0.5|430|NLV25T-R22J-PF|
|0.27|±5%|30|25.2|425|0.55|420|NLV25T-R27J-PF|
|0.33|±5%|30|25.2|400|0.6|400|NLV25T-R33J-PF|
|0.39|±5%|30|25.2|375|0.65|375|NLV25T-R39J-PF|
|0.47|±5%|30|25.2|350|0.68|350|NLV25T-R47J-PF|
|0.56|±5%|30|25.2|325|0.75|325|NLV25T-R56J-PF|
|0.68|±5%|30|25.2|300|0.85|300|NLV25T-R68J-PF|
|0.82|±5%|30|25.2|260|1|260|NLV25T-R82J-PF|
|1|±5%|30|7.96|245|1.1|245|NLV25T-1R0J-PF|
|1.2|±5%|30|7.96|230|1.2|230|NLV25T-1R2J-PF|
|1.5|±5%|30|7.96|182|1.3|220|NLV25T-1R5J-PF|
|1.8|±5%|30|7.96|135|1.45|210|NLV25T-1R8J-PF|
|2.2|±5%|30|7.96|105|1.55|200|NLV25T-2R2J-PF|
|2.7|±5%|30|7.96|70|1.7|195|NLV25T-2R7J-PF|
|3.3|±5%|30|7.96|55|1.9|185|NLV25T-3R3J-PF|
|3.9|±5%|30|7.96|48|2.1|180|NLV25T-3R9J-PF|
|4.7|±5%|30|7.96|43|2.3|175|NLV25T-4R7J-PF|
|5.6|±5%|25|7.96|42|2.5|170|NLV25T-5R6J-PF|
|6.8|±5%|25|7.96|39|2.7|165|NLV25T-6R8J-PF|
|8.2|±5%|25|7.96|36|3.05|160|NLV25T-8R2J-PF|
|10|±5%|25|2.52|33|3.5|155|NLV25T-100J-PF|
|12|±5%|25|2.52|30|3.8|150|NLV25T-120J-PF|
|15|±5%|25|2.52|26|4.4|140|NLV25T-150J-PF|
|18|±5%|25|2.52|24|4.8|130|NLV25T-180J-PF|
|22|±5%|25|2.52|22|5.5|125|NLV25T-220J-PF|
|27|±5%|25|2.52|21|6.3|115|NLV25T-270J-PF|
|33|±5%|25|2.52|20|7.1|110|NLV25T-330J-PF|
|39|±5%|20|2.52|18|9.5|90|NLV25T-390J-PF|
|47|±5%|20|2.52|17|11.1|80|NLV25T-470J-PF|
|56|±5%|20|2.52|16|12.1|75|NLV25T-560J-PF|
|68|±5%|20|2.52|15|16.6|70|NLV25T-680J-PF|
|82|±5%|20|2.52|13|19|66|NLV25T-820J-PF|
|100|±5%|15|0.796|12|21|60|NLV25T-101J-PF|



>  Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (10% below the initial L value) Idc2: When based on the temperature increase (Temperature increase of 20°C by self heating) 

## ○ Measurement equipment 

|Measurement item|Product No.|Manufacturer|
|---|---|---|
|L, Q|4191A+16092A<br>4194A+16085A+16093B|Keysight Technologies|
|Self-resonant frequency|8753C|Keysight Technologies|
|DC resistance|VP-2941A|Panasonic|



- ＊ Equivalent measurement equipment may be used. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_standard_nlv25-pf_en 

(7/9) 

## **NLV25-PF Type** 

## **ELECTRICAL CHARACTERISTICS** 

## **L FREQUENCY CHARACTERISTICS GRAPH** 

**==> picture [496 x 552] intentionally omitted <==**

**----- Start of picture text -----**<br>
1000<br>101J<br>820J<br>680J<br>560J<br>470J<br>390J<br>330J<br>270J<br>220J<br>100 180J<br>150J<br>120J<br>100J<br>8R2J<br>— ys<br>——— ee eee 6R8J<br>5R6J<br>——eeeLL) 4R7J<br>3R9J<br>——— AJ 3R3J<br>10<br>ee, 2R7J<br>2R2J<br>ey | 1R8J<br>= ery<br>1R5J<br>———_——_——— ae 1R2J<br>ee 1R0J<br>ee R82J<br>1 R68J<br>ee SSN R56J<br>R47J<br>—————| R39J<br>ss ee ees Ge ce R33J<br>R27J<br>ee ee<br>ee o m<br>a<br>0.1 Ee]<br>—————————————eres<br>ee<br>0.01 010J Vea eee<br>047J 039J \ 033J \ 027J \ | 022J R10J XU 082J 068J \ 018J A 015J \ 012J \ 056J<br>R22J R18J R15J R12J<br>| Na I\<br>0.001<br>0.1 1 10 100 1000<br>Frequency(MHz)<br>○ Measurement equipment<br>Product No. Manufacturer<br>4291A Keysight Technologies<br>4294A Keysight Technologies<br>H)<br>µ<br>Inductance(<br>**----- End of picture text -----**<br>


- ＊ Equivalent measurement equipment may be used. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_standard_nlv25-pf_en 

(8/9) 

## **NLV25-PF Type** 

## **ELECTRICAL CHARACTERISTICS** 

**Q FREQUENCY CHARACTERISTICS GRAPH** 

**==> picture [483 x 553] intentionally omitted <==**

**----- Start of picture text -----**<br>
60<br>056J<br>50<br>047J<br>068J<br>HHH 4R7J<br>1R8J 150J 082J<br>40 3R3J 033J<br>180J<br>R33J<br>3R9J R39J<br>2R7J<br>100J<br>1R0J<br>010J<br>6R8J R27J<br>30<br>039J<br>R15J<br>5R6J<br>R12J<br>120J R68J 012J<br>1R2J 022J<br>8R2J 015J<br>470J<br>220J 018J<br>2R2J<br>20 270J<br>330J R10J<br>390J<br>027J<br>560J<br>820J<br>680J<br>R22J 101J<br>10 R18J<br>1R5J<br>R82J<br>R56J<br>R47J<br>0<br>0.1 1 10 100 1000<br>Frequency(MHz)<br>○ Measurement equipment<br>Product No. Manufacturer<br>4291A Keysight Technologies<br>4294A Keysight Technologies<br>Q<br>**----- End of picture text -----**<br>


- ＊ Equivalent measurement equipment may be used. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_standard_nlv25-pf_en 

(9/9) 

## **NLV25-PF Type** 

## **PACKAGING STYLE** 

## **REEL DIMENSIONS** 

2.0±0.5 E Type A W1 W2 **NLV25-PF** ø180 9 13 * These values are typical values. LEY (1.0) ø13.0±0.5 W1 ~~O~~ | | ø21.0± ~~f~~ 0.8 W2 A Dimensions in mm **TAPE DIMENSIONS** øD0 P2 P0 P1 K ~~as SSSSSSS '~~ A t Dimensions in mm ~~fy. a~~ Type A B øD0 E F P0 P1 P2 W K t ~~a~~ **NLV25-PF** 2.3 2.7 1.5+0.1/-0 1.75±0.1 3.50±0.05 4.00±0.10 4.00±0.10 2.00±0.05 8.00±0.30 2 0.4 

|Typeypee<br>A|W1|W2|N|E|
|---|---|---|---|---|
|* These values are typical values.<br>**NLV25-PF**<br>ø180<br>9||13|ø60|0.5|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_standard_nlv25-pf_en

Updated at April 28, 2026

TDK Corporation is a globally recognized leader in electronic components and magnetic materials. Founded in 1935 to commercialize ferrites, the Tokyo-based company has evolved into a comprehensive manufacturer of high-performance passive components, sensors, and power electronics. TDK’s advanced materials technology serves as the foundation for its extensive portfolio, driving innovation across automotive, industrial, consumer electronics, and communication technologies. Our selection of TDK components heavily features their industry-leading passive components, with a primary focus on magnetics. TDK excels in manufacturing reliable inductive solutions, offering a vast array of power inductors and RF inductors optimized for demanding power management and high-frequency applications. Furthermore, their expertise in electromagnetic compatibility is showcased through a comprehensive range of EMC and RFI suppression products. This includes common mode chokes, power line filters, and specialized shielding materials designed to ensure superior signal integrity in complex designs. Beyond inductors and filtering components, TDK provides robust circuit protection and sensing solutions essential for modern engineering. The portfolio includes precision temperature sensing and compensation NTC thermistors, alongside TVS varistors and inrush current limiting components that safeguard sensitive electronics. Complemented by fixed value inductors, supercapacitors, and charging coils, TDK's versatile product offering delivers the reliability and performance required for sophisticated circuit design.

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →