NLP25-7608J

AC/DC Open Frame Power Supply (PSU), ITE, 3 Output, 20.8 W, 90V AC to 264V AC, Fixed

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.

Manufacturer: ARTESYN EMBEDDED TECHNOLOGIES
Product type: AC / DC Open Frame Power Supplies
Product Range: NLP25
No. of Outputs: 3 Output
Output Power Max: 20.8W
Input Voltage VAC: 90V AC to 264V AC
Input Voltage AC Max: 264V
Input Voltage AC Min: 90V
Power Supply Approvals: ITE
Power Supply Output Type: Fixed
Output Current - Output 1: 2A
Output Current - Output 2: 800mA
Output Current - Output 3: 100mA
Output Voltage - Output 1: 5VDC
Output Voltage - Output 2: 12VDC
Output Voltage - Output 3: -12VDC
Power Rating (Convection Cooling): 20.8W

Delivery and price
Units per pack	150
Price	36.33 €
Current stock	10+
Lead time	30 days

Datasheet

## _NLP25 Series S i n g l e ,  d u a l  a n d  t r i p l e  o u t p u t_ 

**LOW TO MEDIUM POWER AC/DC POWER SUPPLIES     20-25 W AC/DC Universal Input Switch Mode Power Supplies** 

**1** 

- **4.00 x 2.07 x 0.91 inch package** 

- **Overvoltage protection and short circuit protection** 

- **25 W with free air convection cooling** 

- **EN55022, EN55011 conducted emissions level B** 

- **UL, VDE, CSA and CCC safety approvals** 

- **Available RoHS compliant** 

The NLP25 series is a 25 W universal input ac-dc power supply on a 4.00 x 2.07 inch card with a profile of less than 1 inch. The availability of four single output and three multiple output models in an extremely small package size make the NLP25 ideal for use in space critical, low power communication applications requiring an off line power solution. The NLP25 provides 25 W of output power with free air convection cooling which can peak at 30 W for 60 seconds. Standard features include overvoltage and short circuit protection. The series, with full international safety approvals and the CE mark, meets conducted emissions EN55022 level B and complies to EN61000-4-2,-3,-4, -5 and -6 immunity standards. The NLP25 series is designed for use in off line, low power data networking and computer applications with limited space, such as hubs, routers, POS terminals, external disk storage and cable modems. The availability of 5 V outputs in single and multiple configurations provides a solution for a myriad of microprocessor applications. 

**2 YEAR WARRANTY** 

## _**All specifications are typical at nominal input, full load at 25 °C unless otherwise stated**_ 

## _**SPECIFICATIONS**_ 

|**OUTPUT SPECIFICATIONS**|**OUTPUT SPECIFICATIONS**||
|---|---|---|
|Total regulation<br>(Line and load)|Main output<br>Auxiliary outputs|±2.0%<br>±5.0%|
|Overshoot/undershoot|At turn-on|2.0%|
|Transient response|Main output<br>50% to 100%<br>full load step|±5.0% max. dev.,<br>1 ms recovery<br>to 1.0%|
|Temperature coefficient||±0.02%/°C|
|Overvoltage protection|Main output|See table|
|Short circuit protection||Continuous with|
|||autorestart|
|Minimum output current||See table|
|**INPUT SPECIFICATIONS**|||
|Input voltage range|Universal input|90-264 Vac|
|Input frequency range||127-375 Vdc<br>47-440 Hz|
|Input current<br>Safety ground|90 Vac<br>230 Vac<br>120 Vac, 60 Hz|0.75 A rms max.<br>0.35 A rms max.<br>0.2 mA|
|leakage current|230 Vac, 50 Hz|0.4 mA|



|EMC CHARACTERISTICS|EMC CHARACTERISTICS||||
|---|---|---|---|---|
|Radiated emissions|EN55022/11, FCC part 15||EN55022/11, FCC part 15|Level A|
|Conducted emissions|EN55022/11, FCC part 15||EN55022/11, FCC part 15|Level B|
|Electrostatic discharge|EN61000-4-2|||Level 2|
|Electrical fast|EN61000-4-4|||Level 3|
|transients/bursts|||||
|Surge susceptibility|EN61000-4-5|||Level 3|
|RF field susceptibility|EN61000-4-3|||Level 3|
|RF conducted|EN61000-4-6|||Level 3|
|disturbance|||||
|GENERAL SPECIFICATIONS|||||
|Hold-up time|110 Vac @ full load|||5 ms typ.|
|Efficiency|110 Vac @ full load|||70% typ.|
|Isolation voltage|Input/output|||3000 Vac|
||Input/chassis|||1500 Vac|
|Switching frequency|Fixed||60 kHz, ±10 kHz|60 kHz, ±10 kHz|
|Approvals and||EN60950, IEC950|||
|standards|VDE0805, UL1950, CCC60950||||
|(See Notes 4, 8)||CSA C22.2 No. 950|||
|Weight||||115 g (4 oz)|
|MTBF|MIL-HDBK-217F|150,000 hours min.|||
|ENVIRONMENTAL SPECIFICATIONS|||||
|Thermal performance|Operating ambient, FL|Operating ambient, FL|0 °C to +50 °C|0 °C to +50 °C|
|(See Notes 7, 8)|Non-operating||-40 °C to +85 °C|-40 °C to +85 °C|
||0 °C to 50 °C, ambient,|||Full load|
||convection cooled||||
||Peak|||See Note 1|
|Relative humidity|Non-condensing||5% to 95% RH||
|Altitude|Operating||10,000 feet max.||
||Non-operating||30,000 feet max.||
|Vibration (See Note 6)|5-500 Hz||2.4 G rms peak||
|Shock|MIL-STD-810E|||516.4 Part IV|



File Name: NLP25.PDF Rev (02): 08 Nov 2005 

## _NLP25 Series_ 

_S i n g l e ,  d u a l  a n d  t r i p l e  o u t p u t_ 

**==> picture [171 x 47] intentionally omitted <==**

**LOW TO MEDIUM POWER AC/DC POWER SUPPLIES     20-25 W AC/DC Universal Input Switch Mode Power Supplies 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm** 

|**OUTPUT**|**OUTPUT**|**OUTPUT CURRENT**|**OUTPUT CURRENT**|**OUTPUT CURRENT**|**RIPPLE (2)**|**OVP**|**TOTAL**|**MODEL**|
|---|---|---|---|---|---|---|---|---|
|**POWER**|**VOLTAGE**|**MIN(3)**|**MAX**|**PEAK(1)**||**THRESHOLD (5) **|**REGULATION (3)**|**NUMBER(9,10,11)**|
|20.8 W|+5 V (IA)|0.2 A|2 A|2.5 A|50 mV|5.6-6.9 V|±2.0%|NLP25-7608J|
||+12 V (IB)|0.1 A|0.8 A|1.2 A|120 mV||±5.0%||
||–12 V (IC)|0 A|0.1 A|0.15 A|50 mV||±5.0%||
|20.1 W|+5 V (IA)|0.2 A|2 A|2.5 A|50 mV|5.6-6.9 V|±2.0%|NLP25-7607J|
||+12 V (IB)|0.1 A|0.8 A|1.2 A|120 mV||±5.0%||
||–5 V (IC)|0 A|0.1 A|0.15 A|50 mV||±5.0%||
|19.6 W|+5 V (IA)|0.2 A|2 A|2.5 A|50 mV|5.6-6.9 V|±2.0%|NLP25-7629J|
||+12 V (IB)|0.1 A|0.8 A|1.2 A|120 mV||±5.0%||
|25 W|+5 V|0 A|5 A|6 A|50 mV|5.6-6.9 V|±2.0%|NLP25-7605J|
|25 W|+12 V|0 A|2.08 A|2.5 A|120 mV|14-16.7 V|±2.0%|NLP25-7612J|
|25 W|+24 V|0 A|1.04 A|1.25 A|150 mV|29-34.2 V|±2.0%|NLP25-7624J|
|25 W|+48 V|0 A|0.52 A|0.6 A|150 mV|55-60 V|±2.0%|NLP25-7617J|



## **Notes** 

- **1** Peak output current lasting less than 60 seconds with duty cycle less than 5.0%. During peak loading, output voltage may exceed total regulation limits. 

- **2** 20 MHz bandwidth, peak to peak, measured differentially with a 12 inch twisted pair of number 16 AWG copper wire, terminated with a 47 µF capacitor of proper polarity and voltage rating. 

- **3** Total regulation is defined as the static output regulation at 25 ºC, including initial tolerance, line voltage within stated limit, load current within stated limit, and output voltage adjusted to their factory settings. To achieve specified regulation on multiple output models, minimum loads are required on V(A) and V(B) as outlined in above table. 

- **4** To maintain user-system safety approvals, the input power cable must be appropriately rated and approved. 

|**OUTPUT PIN CONNECTIONS**|**OUTPUT PIN CONNECTIONS**|**OUTPUT PIN CONNECTIONS**|**OUTPUT PIN CONNECTIONS**|
|---|---|---|---|
|**J2**|**SINGLE**|**DUAL**|**TRIPLE**|
|Pin 1|V (A)|No Connection|V (C)|
|Pin 2|Return|Return|Return|
|Pin 3|V (A)|V (A)|V (A)|
|Pin 4|Return|Return|Return|
|Pin 5|V (A)|V (B)|V (B)|



- **5** Main output voltage is protected by a Zener diode. 

- **6** Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5 Hz to 500 Hz. 

- **7** CAUTION: Allow a minimum of 5 seconds after disconnecting line power when making thermal measurements. 

- **8** This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 

- **9** All models of the NLP25 series are floating output except for the NLP257612J unit.  The NLP25-7612J unit has its 0 Vdc output (return on J2 pins 2 and 4) directly connected to the incoming earth/ac ground.  For the NLP7612J floating output please consult Artesyn Technologies. 

- **10** The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 

|**INPUT**|**INPUT**|
|---|---|
|**PIN CONNECTIONS**||
|**J1**||
|Pin 1|AC Ground|
|Pin 3|AC Line|
|Pin 5|AC Neutral|



- **11** NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. 

File Name: NLP25.PDF Rev (02): 08 Nov 2005 

## _NLP25 Series S i n g l e ,  d u a l  a n d  t r i p l e  o u t p u t_ 

**LOW TO MEDIUM POWER AC/DC POWER SUPPLIES     20-25 W AC/DC Universal Input Switch Mode Power Supplies 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm** 

**==> picture [466 x 275] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.00  ± 0.02<br>(101.60  ± 0.5)<br>3.730  ± 0.02<br>(94.74  ± 0.5)<br>Maximum<br>Component 1<br>Height 0.91 (23.11)<br>2.07  ± 0.02 1.80  ± 0.02<br>(52.58  ± 0.5) J1 J2 (45.72  ± 0.5)<br>5<br>3<br>1<br>| O Be, |<br>If Metallic fastners are used, Max. stand-off dia.  ø0.125  ± 0.01<br>should be 0.212 (5.38) and the screw or washer (ø3.18  ± 0.25)<br>should not protrude beyond the circle.<br>ALL DIMENSIONS IN INCHES (mm)<br>**----- End of picture text -----**<br>


## **Input and output connectors Mating connectors** 

**AC (J1) connector type AC (J1) mating connector type** Molex 22-23-2051 or equivalent. Molex 22-01-2057 with Molex 08-52-0123 crimp terminals or equivalent. 

**DC (J2) connector type DC (J2) mating connector type** Molex 22-23-2051 or equivalent. Molex 22-01-2057 with Molex 08-52-0123 crimp terminals or equivalent. 

## **International Safety Standard Approvals** 

VDE0805/EN60950/IEC950 File No. 10401-3336-0118 Licence No. 104743 

## A @ 

UL1950 File No. E136005 

CSA C22.2 No. 950 File No. LR41062 

China Compulsory Certification 60950 

## Datasheet © Artesyn Technologies® 2005 

The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. 

_**www.artesyn.com**_ 

File Name: NLP25.PDF Rev (02): 08 Nov 2005

Updated at February 9, 2023

Artesyn Embedded Technologies, now part of Advanced Energy, is a global leader in the design and manufacture of highly reliable embedded power conversion solutions. The company is widely recognised for engineering robust power systems that drive the most demanding applications across hyper-scale data centres, telecom infrastructures, industrial automation, and medical technology. Our extensive range of Artesyn components is heavily focused on power supplies, specifically a broad selection of AC / DC converters. This comprehensive portfolio includes open-frame and enclosed models, configurable modular power supplies, and rack-mounting bulk front-end units. Engineered for exceptional efficiency and safety, these AC / DC power supplies are designed to integrate seamlessly into complex power architectures. Complementing this primary offering, we also feature a targeted selection of Artesyn's DC / DC converters. This includes precision-engineered isolated and non-isolated models available in industry-standard brick form factors, ensuring reliable power delivery and tight voltage regulation for critical board-level and embedded applications.

About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 540,000+ components from 500+ manufacturers.

Learn more →

Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.

Request a quote →

Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.

BOM Analysis service →