NLC453232T-221K-PF

September 2016 

## Inductors for Decoupling Circuits Wound Ferrite **NLC Series** 

## NLC453232 Type 

**4532 [1812 inch]*** 

- **Dimensions Code JIS[EIA]** 

**NLC453232** 

(2/10) 

## **REMINDERS FOR USING THESE PRODUCTS** 

Before using these products, be sure to request the delivery specifications. 

## **SAFETY REMINDERS** 

Please pay sufficient attention to the warnings for safe designing when using these products. 

## **REMINDERS** 

- The storage period is less than 6 months.  Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). 

If the storage period elapses, the soldering of the terminal electrodes may deteriorate. 

Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). 

Before soldering, be sure to preheat components. 

The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. 

- Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. 

- When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. 

- Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. 

- Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. 

- Use a wrist band to discharge static electricity in your body through the grounding wire. 

- Do not expose the products to magnets or magnetic fields. 

- Do not use for a purpose outside of the contents regulated in the delivery specifications. 

- The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. 

- The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. 

If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. 

- (1) Aerospace/Aviation equipment 

- (8) Public information-processing equipment 

(2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications 

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 

20160909 / inductor_commercial_decoupling_nlc453232_en 

(3/10) 

## **Inductors for Decoupling Circuits Wound Ferrite** 

**Product compatible with RoHS directive Compatible with lead-free solders** 

## **Overview of NLC453232 Type** 

## **FEATURES** 

Resin mold type wound inductor for decoupling circuits. 

E-12 Series, wide lineup compatible with K (±10%) tolerance allows for various usages. 

## | **APPLICATION** 

Smart meters, AV equipment, xDSL, electronic devices for communications infrastructure such as mobile base stations, industrial equipment, other 

## | **PART NUMBER CONSTRUCTION** 

- - NLC 453232 T 1R0 K PF ~~a~~ G **L×W×H Dimensions Inductance Inductance Lead-free Series name Packaging style (mm) (µH) tolerance compatible** 453232 4.5×3.2×3.2 T Taping 1R0 1 K ±10% 100 10 101 100 ~~i Ft~~ 

## | **OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT** 

|**Type**|**Temperature range**<br>**Operating**<br>**temperature**<br>（**°C**）<br>**Storage**<br>**temperature**<br>（**°C**）|**Temperature range**<br>**Operating**<br>**temperature**<br>（**°C**）<br>**Storage**<br>**temperature**<br>（**°C**）|**Package quantity**<br>**(pieces/reel)**|**Individual weight**<br>（**mg**）|
|---|---|---|---|---|
|**NLC453232**|–40 to +105|–40 to +105|500|180|



>  Operating temperature range includes self-temperature rise. 

>  The Storage temperature range is for after the circuit board is mounted. 

RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_decoupling_nlc453232_en 

(4/10) 

## **NLC453232 Type** 

## a **RECOMMENDED REFLOW PROFILE** 

||||Preheating|Preheating|||Soldering|Soldering|Soldering|Natural|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||||||||||cooling|||
|||||||||Peak|||||
|||||||||T4|||||
|T:Temperature|||||T2|T3||t3||T3|||
||T1||||||||||||
|||||t1||||t2|||||
||||||||||||||
||||||t:Time||||||||
|**Preheating**||||||**Soldering**|||||**Peak**||
|**Temp.**|||**Time**|||**Temp.**||**Time**|||**Temp.**|**Time**|
|**T1**|**T2**||**t1**|||**T3**||**t2**|||**T4**|**t3**|
|150°C<br>180°C|||90 to 120s|90 to 120s||230°C||40s|||255°C|10s max.|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_decoupling_nlc453232_en 

(5/10) 

## **NLC453232 Type** 

## **SHAPE & DIMENSIONS** 

R0.2 

120 C0.5 4.5±0.3 0.5 (0.6) (3.3) (0.6) ~~lJi~~ i ~~ll~~ Lil @ Dimensions in mm m ~~l~~ 

**RECOMMENDED LAND PATTERN** 1.5 3 1.5 Dimensions in mm L ~~o~~ 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_decoupling_nlc453232_en 

(6/10) 

## **NLC453232 Type** 

## a **ELECTRICAL CHARACTERISTICS** ~~SO~~ **CHARACTERISTICS SPECIFICATION TABLE** 

|**L**||**Q**|**L, Q measuring**<br>**DC resistance**|**L, Q measuring**<br>**DC resistance**|**Rated current**|**Part No.**|
|---|---|---|---|---|---|---|
||||**frequency**||||
|**(µH)**|**Tolerance**|**min.**|**(MHz)**<br>**(Ω)max.**||**(mA)max.**||
|1|±10%|10|7.96|0.11|1050|NLC453232T-1R0K-PF|
|1.2|±10%|10|7.96|0.12|1000|NLC453232T-1R2K-PF|
|1.5|±10%|10|7.96|0.15|950|NLC453232T-1R5K-PF|
|1.8|±10%|10|7.96|0.16|900|NLC453232T-1R8K-PF|
|2.2|±10%|10|7.96|0.18|850|NLC453232T-2R2K-PF|
|2.7|±10%|10|7.96|0.2|800|NLC453232T-2R7K-PF|
|3.3|±10%|10|7.96|0.22|750|NLC453232T-3R3K-PF|
|3.9|±10%|10|7.96|0.24|700|NLC453232T-3R9K-PF|
|4.7|±10%|10|7.96|0.27|650|NLC453232T-4R7K-PF|
|5.6|±10%|10|7.96|0.3|650|NLC453232T-5R6K-PF|
|6.8|±10%|10|7.96|0.35|600|NLC453232T-6R8K-PF|
|8.2|±10%|10|7.96|0.4|600|NLC453232T-8R2K-PF|
|10|±10%|10|2.52|0.5|550|NLC453232T-100K-PF|
|12|±10%|10|2.52|0.6|500|NLC453232T-120K-PF|
|15|±10%|10|2.52|0.7|450|NLC453232T-150K-PF|
|18|±10%|10|2.52|0.8|400|NLC453232T-180K-PF|
|22|±10%|10|2.52|0.9|370|NLC453232T-220K-PF|
|27|±10%|10|2.52|1.2|330|NLC453232T-270K-PF|
|33|±10%|10|2.52|1.4|300|NLC453232T-330K-PF|
|39|±10%|10|2.52|1.6|280|NLC453232T-390K-PF|
|47|±10%|10|2.52|1.9|260|NLC453232T-470K-PF|
|56|±10%|10|2.52|2.2|240|NLC453232T-560K-PF|
|68|±10%|10|2.52|2.6|220|NLC453232T-680K-PF|
|82|±10%|10|2.52|3.5|200|NLC453232T-820K-PF|
|100|±10%|20|0.796|4|180|NLC453232T-101K-PF|
|120|±10%|20|0.796|4.5|160|NLC453232T-121K-PF|
|150|±10%|20|0.796|6.5|140|NLC453232T-151K-PF|
|180|±10%|20|0.796|7.5|120|NLC453232T-181K-PF|
|220|±10%|20|0.796|9|120|NLC453232T-221K-PF|
|270|±10%|20|0.796<br>11||100|NLC453232T-271K-PF|
|330|±10%|20|0.796|13|90|NLC453232T-331K-PF|



- Rated current: smaller value of either Idc1 or Idc2. Idc1: When based on the inductance change rate (10% below the initial L value) 

Idc2: When based on the temperature increase (Temperature increase of 20°C by self heating) 

## ○ Measurement equipment 

Measurement item Product No. Manufacturer L, Q 4194A+16085A+16093B Keysight Technologies DC resistance VP-2941A Panasonic 

- ＊ Equivalent measurement equipment may be used. 

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_decoupling_nlc453232_en 

(7/10) 

## **NLC453232 Type** 

## **ELECTRICAL CHARACTERISTICS** 

## **L FREQUENCY CHARACTERISTICS GRAPH** 

**==> picture [490 x 556] intentionally omitted <==**

**----- Start of picture text -----**<br>
10000<br>331K 271K<br>1000 221K<br>181K<br>151K<br>121K<br>y) 101K<br>820K<br>680K<br>100 560K<br>470K<br>390K<br>330K<br>270K<br>220K<br>180K<br>150K<br>120K<br>10<br>100K<br>8R2K<br>6R8K<br>5R6K<br>4R7K<br>3R9K<br>3R3K<br>1<br>2R7K<br>2R2K<br>1R8K<br>1R5K<br>1R2K<br>=a 1R0K<br>0.1 a<br>0.01 a<br>0.1 1 10 100<br>Frequency(MHz)<br>○ Measurement equipment<br>Product No. Manufacturer<br>4294A Keysight Technologies<br>＊ Equivalent measurement equipment may be used.<br>H)<br>μ<br>Inductance(<br>**----- End of picture text -----**<br>


Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_decoupling_nlc453232_en 

(8/10) 

## **NLC453232 Type** 

## **ELECTRICAL CHARACTERISTICS** 

## **INDUCTANCE VS. DC BIAS CHARACTERISTICS GRAPH** 

**==> picture [485 x 550] intentionally omitted <==**

**----- Start of picture text -----**<br>
1000<br>[HEE<br>po tC<br>aOO<br>Re eG Oe Oe 0 Oe GO OG<br>Re Ge Oe Oe Oe Oe ee Qe Oe Oe Oe QO<br>331K<br>ee ee<br>271K<br>a 221K<br>181K<br>a<br>151K<br>a 121K<br>100 101K<br>a 820K<br>a ee 680K560K ssRE<br>r |. |. 1.717717 7 rr, | | Tit, GO<br>OO 470K<br>a 0 OO 390K<br>330K<br>a 270K<br>220K<br>a a<br>180K<br>rT. |1.I1,////-| |<br>150K<br>10 A OOCOO 120K100K<br>8R2K<br>A<br>6R8K<br>a ee ee<br>5R6K<br>4R7K<br>rT——| | |iifa s jiife | | f/|tftftffsyesa|a eees<br>a 3R9K ET<br>3R3K Smee<br>OG 2R7K<br>2R2K<br>rs ee ee ee eeOG<br>1R8K<br>rT. | 1.7////- | | 1.)///1)<br>1R5K<br>a ee<br>1 PoTN 1R2K<br>1R0K<br>rT TOMSSSOS ee<br>0.1<br>0.01 0.1 1 10<br>DC current(A)<br>○ Measurement equipment<br>Product No. Manufacturer<br>4285A+42841A+42842C Keysight Technologies<br>＊ Equivalent measurement equipment may be used.<br>H)<br>μ<br>Inductance(<br>**----- End of picture text -----**<br>


Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_decoupling_nlc453232_en 

(9/10) 

## **NLC453232 Type** 

## **ELECTRICAL CHARACTERISTICS** 

## **IMPEDANCE FREQUENCY CHARACTERISTICS GRAPH** 

**==> picture [497 x 548] intentionally omitted <==**

**----- Start of picture text -----**<br>
1000000<br>331K 271K<br>221K<br>100000 150K<br>121K<br>101K<br>V\<br>560K<br>181K 470K330K<br>151K 270K220K<br>820K 4R7K<br>10000 5R6K<br>680K<br>8R2K<br>390K 100K<br>180K 3R9K 3R3K<br>LED.<br>1000 YH IRS<br>Zs 1R0K<br>1R2K<br>100 1R5K<br>1R8K<br>gees ES Sts<br>2R2K<br>2R7K<br>120K<br>10 GZ “ 6R8K ;<br>ZL ESS<br>1 aul<br>0.1<br>0.1 1 10 100<br>Frequency(MHz)<br>○ Measurement equipment<br>Product No. Manufacturer<br>4294A Keysight Technologies<br>＊ Equivalent measurement equipment may be used.<br>)<br>Ω<br>Impedance(<br>**----- End of picture text -----**<br>


Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_decoupling_nlc453232_en 

(10/10) 

## **NLC453232 Type** 

## **PACKAGING STYLE** 

## **REEL DIMENSIONS** 

2.0±0.5 E Type A W1 W2 **NLC453232** ø180 13 17 * These values are typical values. Nii, (1.0) ø13.0±0.5 W1 | ø21.0±0.8 W2 A ~~2 |~~ Dimensions in mm **TAPE DIMENSIONS** øD0 P2 P0 P1 K ~~goede b~~ A t Dimensions in mm ~~i~~ lL Type A B øD0 E F P0 P1 P2 W K t ~~ee~~ **NLC453232** 3.6 4.9 1.5+0.1/-0 1.75±0.1 5.50±0.05 4.00±0.10 8.00±0.10 2.00±0.05 12.0±0.30 3.2 0.4 

|Typeypee|A|W1|W2|N|E|
|---|---|---|---|---|---|
|**NLC453232**|ø180|13|17|ø60|0.5|



Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 

20160909 / inductor_commercial_decoupling_nlc453232_en