NJ2-PD-US-2.062-V93

**Inductive sensor NJ2-PD-US-2.062-V93** ~~1)~~ 

**Technical Data General specifications** Switching element function AC/DC NO Rated operating distance sn 2 mm Installation flush Output polarity AC/DC NO Assured operating distance sa 0 ... 1.62 mm Reduction factor rAl 0.4 Reduction factor r304 0.85 **Nominal ratings** Operating voltage UB 20 ... 250 V AC/20 ... 300 V DC Switching frequency f 0 ... 20 Hz Hysteresis H 10 ... 20  % 15  typ. Reverse polarity protection yes ~~ee~~ Short-circuit protection yes Voltage drop Ud ≤ 7 V Momentary current ≤ 3 A (20 ms, 0.1 Hz) Operating current IL 8 ... 300 mA Off-state current Ir < 1.7 mA Mag. Field strength, AC fields 250 mT Mag. Field strength, DC fields 100 mT **Limit data** Operating pressure dynamically 3000 psi **Indicators/operating means** LED green Power on LED red Output status LED red/green Short circuit/overload indication **Standard conformity** Standards EN 60947-5-2 **Ambient conditions** Ambient temperature -25 ... 70 °C (-13 ... 158 °F) **Mechanical specifications** Connection type Connector 7/8"-16 UN , 3-pin Degree of protection IP67 Material Housing: zinc Probe: aluminum Note X =  2.062 in (52.4 mm) **Approvals and certificates** UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose 

**Model Number** ~~a~~ **NJ2-PD-US-2.062-V93** Cylinder Position Switch 

**Features** ~~a~~ **• 2-wire AC/DC** 

- **Weld Immune** 

**• Sensing range 2 mm** Note **• 3000 psi rating Approvals and certificates** 

**Accessories** UL approval cULus Listed, General Purpose ~~a~~ CSA approval cCSAus Listed, General Purpose **V93-G-YE2M-STOOW** Female cordset, 7/8" - 16 UNF, 3-pin, PUR cable ~~esis~~ **Dimensions** 

**==> picture [180 x 208] intentionally omitted <==**

**----- Start of picture text -----**<br>
LEDs<br>Ø48 35<br>| GPEEE. Ii<br>G3 2 x Ø6.5<br>Ø31.75<br>7/8"-16<br>Ø25<br>—a y<br>34.5 37.5<br>Teh 26.5 |<br>15.06<br>"X"<br>nine|<br>|<br>Ø12.7<br>**----- End of picture text -----**<br>


Refer to “General Notes Relating to Pepperl+Fuchs Product Information”. Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 4411 Singapore: +65 6779 9091 www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@de.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com 

**1** 

**NJ2-PD-US-2.062-V93** 

**Inductive sensor** 

**Electrical Connection** 

**==> picture [100 x 55] intentionally omitted <==**

**----- Start of picture text -----**<br>
2<br>AC/DC<br>3<br>1<br>**----- End of picture text -----**<br>


## **Pinout** 

**==> picture [112 x 148] intentionally omitted <==**

**----- Start of picture text -----**<br>
1<br>2 3<br>Wire colors<br>1  GN (green)<br>2  BK (black)<br>3  WH (white)<br>**----- End of picture text -----**<br>


**NPT Type Mounting Holes** : Sensor through-hole Mounting hole (x2) 1000 and 3000 psi NPT Types: Mounting hole screw thread shall be 1/4" - 20. Minimum thread engagement depth is 0.250" (6.35 mm) Hole spacing is 35 mm center to center. Cylinder End-Cap Overhead Viewhole spacingMounting 

**Mounting Screws** : Standard 1000 and 3000 psi models use two, self-locking 1/4"- 20 socket head cap screws (provided). Recommended tightening torque: 150 in lb (16.95 N-m). 

**Important** : When using spacers, make certain to maintain the 0.250" (6.35 mm) minimum mounting screw thread engagement. 

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”. Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 4411 Singapore: +65 6779 9091 www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@de.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com 

2