NHV4-0MN

Drawing No. NHV6-3-W18 

Rev. Page E 1 / 10 

## **SPECIFICATIONS** 

Product Name: Network Signal Tower with Voice Annunciator - - Model: NHV□ □□□□ □□□□□ 

|Drawing No.|Rev.|Page|
|---|---|---|
|NHV6-3-W18|E|2 / 11|



## **1. General Specifications** 

es 5 tiers NHV□-5□□□ es 4 tiers NHV□-4□□□ Model ee 3 tiers NHV□-3□□□ es 2 tiers NHV□-2□□□ ee 1 tier NHV□-1□□□ es 0 tiers NHV□-0□□□ DC Jack 24VDC Rated Voltage es PoE *1 48VDC Conforms to IEEE802.3at  (PoE+) *2 eee AC Adaptor *3 Input: 100 - 240VAC (50/60Hz)      Output: 24VDC Operating DC Jack 21.6 - 26.4VDC Voltage PoE *1 42.5 - 57VDC __ Range **es**[es] AC Adaptor *3 90 - 264VAC Standby: 120mA    Maximum: 210mA    (24VDC input) Rated Current Main Unit *4 ——_—————e Standby: 115mA    Maximum: 175mA    (PoE 48VDC input) Consumption a LED Unit | 40mA  (per Unit, 24VDC input) , 25mA (per Unit, PoE 48VDC input) Rated Power Main Unit *4 Standby: 3.5W   Maximum: 6W   (AC Adaptor, 100VAC input) Consumption a LED Unit 1.0W (per Unit, AC Adaptor, 100VAC input) eo——) a Operating Ambient Temperature 0 - 40 `℃` (No Dew or Condensation) Ge Operating Ambient Humidity 20%RH - 80%RH  (No Dew or Condensation) Gn Storage Ambient Temperature -10 - 60 `℃` (No Dew or Condensation) Ge Storage Ambient Humidity 20%RH - 80%RH  (No Dew or Condensation) Gn Mounting Location Indoor Only Ge Mounting Direction Upright Gn Protection Rating IP 20 Ge Insulation Resistance More than 10Mohm at 500VDC between live part and non-current carrying metallic part 1500VAC applied for 1min (10mA or less) between live part and non-current carrying Withstand Voltage metallic part without breaking insulration Sound Pressure Level 88dB or more Environmental Front direction from the center, at 1m, 1.8kHz sine wave played back at -6dB es Condition MP3 data of the content and use of the environment, the sound pressure level will change. ee a Audio Line Output 600Ω 0dBV    (Unbalanced, Monaural Mini-Jack) ee NHV6 760g + (60g) x Signal Tower Tiers     (AC Adaptor not included) ee NHV4 750g + (35g) x Signal Tower Tiers     (AC Adaptor not included) Mass es NHV6-D 805g + (60g) x Signal Tower Tiers     (AC Adaptor not included) [Tolerance ±10%] ee NHV4-D 795g + (35g) x Signal Tower Tiers     (AC Adaptor not included) es NHV6-DP 850g + (60g) x Signal Tower Tiers a NHV4-DP 840g + (35g) x Signal Tower Tiers External Contact Output (Only D-type) Non-voltage contact output a Number of Contacts 2 es Contact Capacity (30VDC@3A) inrush current 5A or less  (5VDC@1mA, Minimum, Reference) a Wire Diameter Solid Wire / Stranded Wire:  φ0.41 - 0.81mm  (AWG26 - 20) _——_—_—_—_——es Wiring Method Screwless terminal block External Contact Input (Only D-type) Non-voltage contact input    NPN Transistor es Number of Contacts 4 "ON" output current @ 6mA or less per channel Contact Capacity Terminal OFF condition Voltage: 24VDC a Wire Diameter Solid Wire / Stranded Wire:  φ0.41 - 0.81mm  (AWG26 - 20) eeees Wiring Method Screwless terminal block 

|||||||||||||||||||||||||Drawing No.|||Rev.|Rev.|Page|Page||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|||||||||||||||||||||||||NHV6-3-W18||||E<br>3 / 11|3 / 11|||
|||||||||||||||||||||||||||||||||
||Communication Method||||||Communication Method|||||||||||||||Ethernet (Conforms to the IEEE 802.3)<br>10BASE-T / 100BASE-TX / 1000BASE-T  (Auto MDI / MDI-X)||||||||||
|||||||||IP Network||IP Network||||||||||||||IPv4 / IPv6  dual stack||||||||
|||||Interface||||||||||||||||||||USB2.0/1.1  Type-A   1ch||||||||
|||Outer Dimensions||||||||||||||||||||||Refer to the Outer Dimension Drawing||||||||
||||Accessories|||||||||||||||||||||AC Adaptor *3 , Adhesive sheet||||||||
|||||||||||NHV6||||||||||||||LED Unit<br>LR6-E-R, Y, G, B, MZ<br>LR6-E-RZ, RY, RG, RB, C||||||||
|Compatible Unit||||Compatible Unit|||||||||||||Wireless Data Acquisition System  Transmitter||||||||WDT-6LR-Z2|||||||
||(Optional)|||||||||NHV4||||||||||||||LR4-E-RZ, RY, RG, RB, C<br>LED Unit<br>LR4-E-R, Y, G, B|||||LR4-E-RZ, RY, RG, RB, C<br>LR4-E-R, Y, G, B|||
||||||||||||||||||Wireless Data Acquisition System  Transmitter||||||||WDT-4LR-Z2|||||||
|||||||||||||||||||||||Wall Mounting Bracket||||||NH-001||||
|||Optional Parts||||||||||||||||||Partition Mounting Bracket||||||||NH-002||||
|||||||||||||||||||||||||AC Adaptor||||ADP-001||||
|||||||||||||||||||||||||UL 62368-1, CSA C22.2 No.62368-1||||||||
|||||||||||||||||||||||||FCC Part 15 Subpart B(Class A), ICES-003(Class A)||||||||
||Conformity Standards||||Conformity Standards|||||||||||||||||||EN 55032(Class A), EN 55035, EN IEC 63000||||||||
|||||||||||||||||||||||||(KS C 9610-6-4, KS C 9610-6-2) *5||||||||
|||||||||||||||||||||||||(TR CU 020, TR EEU 037) *5||||||||
||||||||||||||||||*1  Only P-type||*1  Only P-type|||||||||||||
||||||||||||||||||*2  A PoE+ power supply HUB that complies with IEEE802.3at is required.||||*2  A PoE+ power supply HUB that complies with IEEE802.3at is required.|||||||*2  A PoE+ power supply HUB that complies with IEEE802.3at is required.||||
||||||||||||||||||USB cannot be used with PoE-powered HUBs that comply with IEEE802.3af.||USB cannot be used with PoE-powered HUBs that comply with IEEE802.3af.||||||||USB cannot be used with PoE-powered HUBs that comply with IEEE802.3af.|||||
|||||Remark|||||||||||||*3  Excludes N-type and P-type<br>*4  Does not include USB current consumption|||||*3  Excludes N-type and P-type<br>*4  Does not include USB current consumption||||||||||
||||||||||||||||||*5  Only N-type and P-type||*5  Only N-type and P-type|||||||||||||
||||||||||||||||||・Conforms to the CE Requirements||||Conforms to the CE Requirements||Conforms to the CE Requirements・Conforms to the UKCA Requirements||||Conforms to the UKCA Requirements|||||
||||||||||||||||||・UL/cUL Listed|||||||||||||||
|**2. Model**||||||||||||||||||||||||||||||||
|2.1. Model Number Configuration||||2.1. Model Number Configuration||||2.1. Model Number Configuration||||||||||||||||||||||||
|||||||||||||||||||||||||||||||||
|N||H|||V|||||□-||||||||□|||□□□<br>□<br>□<br>-<br>□<br>□□|||||||||||
||Signal Tower Type||||||||||||Signal Tower Tiers|||||||||||PowerSupplyMethod||||LEDUnitColor||||
||6|||LR6(φ60)|||||||||0||||0 tiers|||||||AC Adaptor (included)<br>Blank||||R<br>Red||||
||4|||LR4(φ40)|||||||||1||||1 tier|||||||N<br>AC Adaptor (not included)||||Y Amber||||
||||||||||||||2||||2 tiers|||||||P<br>PoE  or||||G Green||||
||||||||||||||3||||3 tiers|||||||AC Adaptor(not included)||||B Blue||||
||||||||||||||4||||4 tiers|||||||||||C White||||
||||||||||||||5||||5 tiers|||||||Extension Function||||From top to bottom||||
|||||||||||||||||||||||||Blank Standard||||||||
||||||||External I/O|||||||||||||||||M<br>Mail Detection||||||||
|||||||||Blank|||||I/O does not exist|||||||||||||||||||
|||||||||||D|||I/O exists|||||||||||||||||||



## **2. Model** 

Drawing No. Rev. Page NHV6-3-W18 E 4 / 11 te 

## 2.2. Model Number List 

NHV4-0 NHV4-0N NHV6-0 NHV6-0N NHV4-1-R NHV4-3N-RYG NHV6-1-R NHV6-3N-RYG NHV4-1-Y NHV4-0DN NHV6-1-Y NHV6-0DN NHV4-1-G NHV4-3DN-RYG NHV6-1-G NHV6-3DN-RYG NHV4-2-RY NHV4-0DP NHV6-2-RY NHV6-0DP NHV4-2-RG NHV4-3DP-RYG NHV6-2-RG NHV6-3DP-RYG NHV4-3-RYG NHV4-0M NHV6-3-RYG NHV6-0M NHV4-4-RYGB NHV4-3M-RYG NHV6-4-RYGB NHV6-3M-RYG NHV4-5-RYGBC NHV4-0MN NHV6-5-RYGBC NHV6-0MN NHV4-0D NHV4-3MN-RYG NHV6-0D NHV6-3MN-RYG NHV4-1D-R NHV6-1D-R NHV4-1D-Y NHV6-1D-Y NHV4-1D-G NHV6-1D-G NHV4-2D-RY NHV6-2D-RY NHV4-2D-RG NHV6-2D-RG NHV4-3D-RYG NHV6-3D-RYG NHV4-4D-RYGB NHV6-4D-RYGB NHV4-5D-RYGBC NHV6-5D-RYGBC 

## **3. Action Specification** 

3.1. Information (Main Unit) 

|ON(250ms), OFF(250ms)   (repetition)<br>ON(1000ms), OFF(1000ms)   (repetition)<br>Flashing pattern 1<br>Flashing pattern 2<br>Flashing pattern 3<br>Flashing pattern 4<br>**Signal Tower**<br>**Lighting, Flashing pattern, and off lighting can be controlled for each LED.**<br>ON(500ms), OFF(500ms)   (repetition)<br>ON(80ms), OFF(170ms), ON(80ms), OFF(670ms)   (repetition)<br>z=|
|---|
|**Notification Sound**<br>**Buzzer**<br>Chime Sound : 5 kinds<br>MP3 Format<br>Preset<br>Number of Notification Sounds<br>MP3 File : 5 kinds     Preset : 5 kinds<br>**Up to 10 of Notification Sounds can be played in combination with other Sound.**<br>Bit Rate : 32kbit/s, 64kbit/s, 128kbit/s        Constant Bit Rate (CBR) only<br>Buzzer pattern 4<br>ON(continuity)<br>Buzzer pattern 5<br>ON(1000ms), OFF(1000ms)    (repetition)<br>**5 kinds of buzzer sounds**<br>Buzzer pattern 1<br>ON(250ms),  OFF(250ms)    (repetition)<br>Buzzer pattern 2<br>ON(500ms), OFF(500ms)     (repetition)<br>Buzzer pattern 3<br>ON(200ms), OFF(50ms),  ON(200ms), OFF(550ms)    (repetition)<br>Input Priority Playback<br>Memory Playback<br>Endless Playback<br>It is played back when set up to play a certain number of times per playback event.<br>It is played back once per playback event.<br>One-shot Playback<br>Repeat Playback<br>One-shot Playback, Repeat Playback, Endless Playback<br>Playback Pattern<br>**Up to 71 types of messages can be played on the main unit speaker and line output.**<br>MP3 File : 60 kinds     Preset : 11 kinds<br>will be interrupted and a new channel will play.<br>If a new playback event occurs, the channel being played back<br>MP3 Format<br>Preset<br>Input Priority Playback, Memory Playback<br>It will play back repeatedly per playback event.<br>Number of playback times : 1 - 254<br>Buzzer Sound : 5 kinds    Chime Sound : 3 kinds     Voice Sound : 3 kinds<br>When playback is ended, the next available channel stored in memory will play.<br>Playback Mode<br>Bit Rate : 32kbit/s, 64kbit/s, 128kbit/s        Constant Bit Rate (CBR) only<br>Number of messages<br>**Sound**<br>—————<br>—<br>ee<br>SSSSS<br>SSS|



||||||Rev.<br>Page<br>Drawing No.<br>NHV6-3-W18<br>E<br>5 / 11<br>ee|Rev.<br>Page<br>Drawing No.<br>NHV6-3-W18<br>E<br>5 / 11<br>ee|Rev.<br>Page<br>Drawing No.<br>NHV6-3-W18<br>E<br>5 / 11<br>ee|Rev.<br>Page<br>Drawing No.<br>NHV6-3-W18<br>E<br>5 / 11<br>ee|
|---|---|---|---|---|---|---|---|---|
|3.2. External Control|||||||||
|**External Contact Output**<br>in conjunction with the signal output from the line-out.<br>BUSY Output<br>It controls the relay contact output<br>**External contact output can be controlled when an event occurs or outputting sound.**<br>Contact Function<br>Digital Output, BUSY Output<br>Digital Output<br>The digital "A Contact" or "B Contact" output<br>for an automatic OFF function of the digital output port can be set up.<br>(E_=———|||||||||
|3.2. Information (Network)|||||||||
|**Email Notification**<br>**SNMP Notification**<br>Number of notifications<br>8<br>Protocol<br>HTTP, HTTPS<br>Authentication protocol<br>Basic Access Authentication, Digest Access Authentication, none<br>Method<br>GET<br>**When an event occurs, Trap or Inform is executed.**<br>Number of notifications<br>8<br>Version<br>v1 / v2c / v3<br>**HTTP Notification**<br>**When an event occurs, HTTP command is executed.**<br>Number of notifications<br>8<br>Authentication protocol<br>SMTP certification(Password, OAuth2), POP authentication<br>Security<br>SSL/TLS, STARTTLS, none<br>**When an event occurs, an e-mail message is transmitted**<br>=<br>SSS<br>——|||||||||
|**4. Function Specification**|||||||||
|4.1. Main Unit Control Function|||||||||
|RSH Command|||||Controllable with RSH Command||||
|SSH Command|||||Controllable with SSH Command||||
|HTTP Command|||||Controllable with HTTP Command||||
|Socket Communication|||||Controllable with PNS Command and PHN Command||||
|Version<br>"Clear" Button<br>SNMP Command<br>_—|||||v1 / v2c / v3<br>Clear operation is possible with "Clear" Button of the main unit<br>Controllable with SNMP "set" Command<br>——||||
||||||Controllable Action||||
|Command||Signal Tower|||e-mail<br>SNMP<br>Sound<br>Buzzer<br>Digi-Out||HTTP||
|RSH Command||||✓|✓<br>✓<br>✓<br>✓*1<br>✓*1||-||
|SSH Command||||✓|✓<br>✓<br>✓<br>✓*1<br>✓*1||-||
|HTTP Command||||✓|-<br>✓*2<br>✓<br>✓<br>-||-||
|PHN<br>Socket<br>PNS|||△*3<br>✓||-<br>△*4<br>-<br>-<br>-<br>✓<br>✓<br>✓<br>-<br>-||-<br>-||
|SNMP Command||||✓|-<br>✓<br>✓<br>✓<br>-||-||
|"Clear" Button||||✓|✓*5<br>✓*6<br>✓<br>✓<br>✓||✓||
|*1<br>It can be used when e-mail or SNMP is set to "Active" in the RSH/SSH Command Configuration.||It can be used when e-mail or SNMP is set to "Active" in the RSH/SSH Command Configuration.|||||||



- *2 It is possible to play back received text data by performing speech synthesis in real time. Notification Sounds can be played in combination with before or after a synthesis sound. 

- *3 Signal Tower "Red", "Amber" and "Green", and Flashing pattern 1 

- *4 Buzzer pattern1 and Buzzer pattern2 

- *5 In memory playback mode, you can proceed to the next message 

- *6 It is possible to stop only the buzzer while maintaining the state of Signal Tower. 

> Drawing No. Rev. Page 

> NHV6-3-W18 E 6 / 11 a 

|Rev.<br>Page<br>Drawing No.<br>NHV6-3-W18W1818<br>E<br>6 / 11<br>a|a|
|---|---|
|4.2. External Monitoring Function||
|**Ping Monitoring Function**<br>**Network abnormality detection by sending Ping network devices**<br>Number of Monitoring<br>24<br>Number of Group<br>3<br>Monitoring Cycle<br>1 - 600 seconds<br>Sending Count<br>The number of times to detect can be set from 1 to 30.<br>Number of Sending<br>The number of sending Ping by one monitoring can be set from 1 to 3.<br>SSS||
|**SNMP Trap Reception Function**<br>**Trap Reception detection**<br>Version<br>v1 / v2c / v3<br>Number of Reception<br>64<br>variable-bindings<br>2 OID per 1 Trap Reception<br>Detectable Type<br>INTEGER, OCTET STRING (String data, Binary data)<br>**SNMP Supported Equipment**<br>**For SNMP Supported equipment, with SNMP command,**<br>Version<br>v1 / v2c / v3<br>INTEGER, OCTET STRING (String data, Binary data)<br>Detection that the acquired value has changed<br>INTEGER<br>**Monitor Function**<br>**their status can be acquisitioned periodically and monitored.**<br>Monitoring Cycle<br>1 - 60 seconds<br>Detection method<br>Condition Agreement Detection : 20    Change Detection : 5<br>Dtection that the acquired value meets the condition<br>Conditions for detecting target emails can be set.<br>**Mail Detection (Only M-type)**<br>**Detect incoming mail on the mail server.**<br>Protocol<br>IMAP, IMAPS, POP3, POP3S<br>Authentication method<br>Password Authentication, OAuth2<br>20<br>Sender, Subject, Body text<br>[Matches with], [Beginning with], [Include], [Be free of]<br>Encryption Method<br>SSL/TLS, STARTTLS, none<br>Mail check interval<br>10 - 3600 seconds<br>Filter Rule<br>Detection Target<br>Decision condition<br>**External Contact Input**<br>Condition Agreement<br>Detectable Type<br>Change Detection<br>Detectable Type<br>**Monitor Function**<br>**It monitors the state change of external contact input.**<br>Number of Condition<br>=<br>==<br>==>||
|Digital Logic Setting<br>A Contact, B Contact||
|Detection method<br>Status Change Detection, Status Agreement Detection<br>Status Change<br>Detection of change from OFF to ON or change from ON to OFF<br>Status Agreement<br>Detecting the input for a certain period of time<br>Detection time : 1 - 3600 seconds         Number of Detection : 4<br>Excutable action at detection<br>Monitoring<br>Signal<br>Sound<br>Buzzer<br>Digi-Out<br>e-mail<br>SNMP<br>HTTP<br>MQTT<br>~~se~~||
|Ping Monitoring<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓||
|SNMP Trap Reception<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓||
|SNMP Supported<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓||
|Mail Detection *1<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓||
|External Contact Input<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓<br>✓||
|*1<br>Mail detection is only available for M-type||



|||Rev.<br>Page<br>Drawing No.<br>NHV6-3-W18<br>E<br>7 / 11<br>it|
|---|---|---|
|4.3. Main Unit Status Acquisition Function||4.3. Main Unit Status Acquisition Function|
|RSH Command||The state of the main body can be acquired by the status acquisition command.|
|SSH Command||The state of the main body can be acquired by the status acquisition command.|
|Socket Communication|Socket Communication|Status acquisition available with PNS Command and PHN Command|
|SNMP Command||Status acquisition available with SNMP "get" Command|
||Version|v1 / v2c / v3|
|HTTP Communication||The state of the main body can be acquired in XML/JSON data format.|



||||Acquisition data|Acquisition data|Acquisition data||
|---|---|---|---|---|---|---|
|Command|Signal Tower|Sound||Buzzer|Digi-In|Digi-Out|
|RSH Command|✓|✓||✓|✓|✓|
|SSH Command|✓|✓||✓|✓|✓|
|PHN<br>Socket<br>PNS|✓*1<br>✓|-<br>✓||✓*2<br>✓|-<br>✓|✓<br>-|
|SNMP Command|✓|✓||✓|✓|✓|
|XML/JSON format file|✓|✓||✓|✓|✓|



- *1 Signal Tower "Red", "Amber" and "Green", and Flashing pattern 1 

*2 Buzzer pattern 1 and Buzzer pattern 2 

4.4.  Main Unit Setting Function 

The internal clock in this product can communicate with an NTP server Time Correction Function es to automatically correct the time. Network setting in this product can communicate with an DHCP server Automatic Network Setting to automatically set. EE Master Volume Setting Master Volume of Buzzer and Sound can be set Flash Control Setting The brightness of the LED unit can be reduced.*1 Standard Action Setting The color of Signal Tower that lights up after the clear operation is executed can be set. Self test of Signal Tower and buzzer is possible Self-test Function with test button of the main body and RSH/SSH command. Config Setting Various settings of the main body can be read and written as setting file. Event Log Event logs can be downloaded via web browser and USB flash drive. ——— USB flash drive can be used to read and written configuration files, USB Flash Drive Function — — update firmware, and download Event logs. Text-to-speech synthesis Speech synthesis from text data can be registered as voice data. ee Supported languages Japanese (Kanji-Kana mixed text), English Main Unit Setting Various settings of the main body can be done with a web browser. Supported browsers Google Chrome *2     Microsoft Edge *3 Languages supported Japanese, English, Traditional Chinese, Sinplified Chinese, Korean, Thai ——— on the setting screen German, French, Italian, Spanish, Mexican *1 Light reduction is not possible when using LR4/6-E-MZ or WDT-4/6LR-Z2. *2 Google Chrome is a trademark or registered trademark of Google LLC. *3 Microsoft Edge is registered trademark of Microsoft Corporation in the United States and other countries. ee 

|||Drawing No.<br>Rev.||Page|
|---|---|---|---|---|
|||NHV6-3-W18<br>E||8 / 11|
|4.5. Cloud Function|||||
|Supported Cloud Platform||Microsoft Azure *1<br>Amazon Web Services (AWS) *2<br>Re|||
||Connection|Azure IoT Central/DPS, Azure IoT Hub|||
|Azure|Settings<br>Built-in features|Device Twin, Direct Method, Device-to-cloud Message,<br>(IoT Plug and Play)<br>Cloud-to-device Message|||
|AWS|Connection Settings<br>Built-in features<br>a<br>a|AWS IoT Core<br>Device Shadow, MQTT client|||
|Main Unit Control<br>Signal Tower, Sound *3, Buzzer, Digital Output<br>es|||||
|Main Unit Status Acquisition<br>Signal Tower, Sound, Buzzer, Digital Output<br>es|||||
|Main Unit Status Transmission||Signal Tower, Sound, Buzzer, "Clear" button,<br>Digital Output, Digital Input|||



- *1  Microsoft Azure is registered trademark of Microsoft Corporation in the United States and other countries. 

- *2  Amazon Web Services, the "Powered by AWS"logo, and any other AWS trademarks used in such materials are trademarks of Amazon.com, Inc. or its affiliates in the United States and other countries. 

- *3  It is possible to play back received text data by performing speech synthesis in real time. Notification Sounds can be played in combination with before or after a synthesis sound. 

**==> picture [187 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
Drawing No. Rev. Page<br>NHV6-3-W18 E<br>9 / 11<br>**----- End of picture text -----**<br>


**==> picture [456 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
NHV6 (Unit: mm)<br>**----- End of picture text -----**<br>


**==> picture [393 x 90] intentionally omitted <==**

**----- Start of picture text -----**<br>
No. Parts name Material Color Number of LED L<br>1 Head Cover PC Off-white 0 tiers 150<br>2 LED Unit PC Clear 1 tier  190<br>3 Main Body ABS Off-white/Medium Gray 2 tiers 230<br>3 tiers 270<br>4 tiers 310<br>5 tiers 350<br>**----- End of picture text -----**<br>


**==> picture [186 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
Drawing No. Rev. Page<br>NHV6-3-W18 E<br>10 / 11<br>**----- End of picture text -----**<br>


**==> picture [456 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
NHV4 (Unit: mm)<br>**----- End of picture text -----**<br>


**==> picture [393 x 90] intentionally omitted <==**

**----- Start of picture text -----**<br>
No. Parts name Material Color Number of LED L<br>1 Head Cover PC Off-white 0 tiers 150<br>2 LED Unit PC Clear 1 tier  190<br>3 Main Body ABS Off-white/Medium Gray 2 tiers 230<br>3 tiers 270<br>4 tiers 310<br>5 tiers 350<br>**----- End of picture text -----**<br>


Drawing No. NHV6-3-W18 

|Rev.||Page|
|---|---|---|
|E|11 / 11|11 / 11|



(Unit: mm)