Image not available
Illustrative purposes only
NG 2/S
AC/DC Power Supply, ITE, 1 Output, 24 W, 12 VDC, 2 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: PROXXON
- Product type: AC / DC External Plug In Adaptor Power Supplies
- No. of Outputs:1 Output; Output Power Max:24W; Output Voltage - Output 1:12V; Output Current - Output 1:2A; Output Voltage - Output 2:-; Output Current - Output 2:; Available until stocks are exhausted
- Plug Type: -
- Product Range: -
- No. of Outputs: 1 Output
- Output Connector: -
- Output Power Max: 24W
- Input Voltage VAC: 220V AC to 240V AC
- Input Voltage AC Max: 240V
- Input Voltage AC Min: 220V
- Power Supply Output Type: Fixed
- Output Current - Output 1: 2A
- Output Current - Output 2: -
- Output Current - Output 3: -
- Output Voltage - Output 1: 12VDC
- Output Voltage - Output 2: -
- Output Voltage - Output 3: -
- Power Supply Applications: ITE
| Delivery and price | |
|---|---|
| Units per pack | 3 |
| Price | 23.69 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
_**MICROMOT mains adaptors: safe and efficient power sources**_ **MICROMOT** _**for hand operated 12 Volt PROXXON machines.**_ System ee ## _**MICROMOT mains adaptor NG 2/E**_ ## **NOTE:** Power consumption of portable machine tools is measured according to the internationally accepted ICE-745-1 specification. The current drawn is measured, not the power consumption with a hot motor just before stalling. In practice, this condition seldom appears, if ever. All PROXXON mains adaptors are suitably dimensioned for the recommended purposes. Adaptors do not include drill. Very compact design. NORYL casing (heat resistant -a necessity for transformer enclosures). Capacity 2,0A at 16 Volt open circuit - and 12 Volt under load = 24VA (DC). Primary supply 220 – 240V. Polarised socket for MICROMOT plug. Red LED indicates readiness for use. PTC (Positive temperature coefficient) element prevents overload (and plugged in tool will not automatically restart). After cooling down, the mains plug should be disconnected briefly to reset the adaptor. Modern design with holes for storing bits. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready. Thyristor electronic speed control (with feedback) for adjusting bit speed to suit the job, as well as providing high torque at low speeds. **No 28 707** ## _**MICROMOT mains adaptor NG 2/S**_ Exactly as above, without electronic speed control. For 220 - 240V. **No 28 706** ## _**MICROMOT mains adaptor NG 5/E**_ In compact NORYL casing (recommended for transformers). With ~~B~~ superior capacity of 5A at 16V no load and 12 Volt under load = 60 ~~e~~ VA (DC). Primary supply 220 – 240V. Thyristor electronic control (with feedback) for optimum tool speed and high torque at low speeds. Three polarised sockets for MICROMOT machines. A pair of sockets for standard banana plugs (4mm diameter) is also supplied. Master switch for turning off the transformer without needing to unplug. Red LED indicates „ready“. PTC protection against overload (plugged in machine will not restart automatically. After cooling down, the mains plug should briefly be unplugged to reset the adapter). Practical design with storage holes for tools with 2.35mm and 3mm shafts. Foldable tool rest – keeps the MICROMOT tool being used safely on standby. ## **No 28 704** 15
Updated at June 3, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →