NC1610474103A

Cylindrical Case Filters **FNC** 

## **Overview** 

## **Applications** 

FNC Cylindrical Case Filters are compact, plastic case EMI filters that feature a high level of performance in a small form factor. Two current ratings of 10 A and 16 A are offered, along with low-cost encapsulation and faston terminals for quick connection. 

Typical applications include consumer goods, domestic appliances, vending machines, and other business equipment. 

## **Technical Specifications** 

|**Item**|**Parameters/**<br>**Characteristics**|
|---|---|
|Rated Voltage|275 VAC|
|Rated Frequency|50 – 60 Hz|
|Rated Current|10 and 16 A|
|Rated Temperature|40°C|
|Temperature Range|−25°C to +85°C|
|Climate Category|25/085/21|
|Voltage Test|P→P 1,700 VDC<br>P→E 3,000 VDC|



## **Approvals** 

The FNC is designed according to IEC/EN/UL 60939 and is approved according to UL1283. 

|**Standard**|**Certification Body**|**File Number**|
|---|---|---|
|UL 1283 5th Edition|UL|E192374|
|CSA C22.2 No. 8|UL|E192374|



**Built Into Tomorrow** 

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

EMI0006_FNC • 7/20/2021 1 

Cylindrical Case Filters FNC 

## **Environmental Compliance** 

KEMET EMI filters are RoHS Compliant. 

**==> picture [68 x 62] intentionally omitted <==**

## **Typical Insertion Loss** 

10 A 

## 16 A 

**==> picture [546 x 150] intentionally omitted <==**

**----- Start of picture text -----**<br>
Differential mode Common mode Differential mode Common mode<br>100 100<br>90 90<br>80 80<br>70 70<br>60 60<br>50 50<br>40 40<br>30 30<br>20 20<br>10 10<br>0 0<br>0.01 0.1 1 10 100 0.01 0.1 1 10 100<br>Frequency (MHz) Frequency (MHz)<br>Attenuation (dB) Attenuation (dB)<br>**----- End of picture text -----**<br>


© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

EMI0006_FNC • 7/20/2021 

2 

Cylindrical Case Filters FNC 

## **Mechanical Dimensions – Millimeters** 

|**Part Number**|**Dimensions**|**Dimensions**|**Weight (g)**|
|---|---|---|---|
||**D(mm)**|**H(mm)**||
|FNC1005154472A|40|40|65|
|FNC1005154103A|40|40|70|
|FNC1005474273A|40|40|75|
|FNC1610474472A|40|50|105|
|FNC1610474103A|40|50|110|
|FNC1610474273A|40|50|115|



- _Self-extinguishing plastic case_ 

- _Sealed with self-extinguishing resin_ 

- _5 faston 6.3 x 0.8 mm terminals_ 

- _Plastic fixing stud M8 x 10 mm_ 

_Tolerances, if not stated, according to ISO 2768-c._ 

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

EMI0006_FNC • 7/20/2021 3 

Cylindrical Case Filters FNC 

## 

## **Disclaimer** 

All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. 

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. 

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. 

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. 

_KEMET is a registered trademark of KEMET Electronics Corporation._ 

© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 

EMI0006_FNC • 7/20/2021 4