MUR3040WTG

## MUR3020WTG, MUR3040WTG, MUR3060WTG 

## Switch Mode Power Rectifiers 

These state−of−the−art devices are designed for use in switching power supplies, inverters and as free wheeling diodes. 

## **Features** 

- Ultrafast 35 and 60 Nanosecond Recovery Time 

**http://onsemi.com** 

**ULTRAFAST RECTIFIERS 30 AMPERES, 200−600 VOLTS** 

- 175°C Operating Junction Temperature 

- Popular TO−247 Package 

- High Voltage Capability to 600 V 

- Low Forward Drop 

- Low Leakage Specified @ 150°C Case Temperature 

- Current Derating Specified @ Both Case and Ambient Temperatures 

- Epoxy Meets UL 94 V−0 @ 0.125 in 

- High Temperature Glass Passivated Junction 

- These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant* 

## **Mechanical Characteristics:** 

- Case: Epoxy, Molded 

- Weight: 4.3 Grams (Approximately) 

- Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable 

- Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds 

- Shipped 30 Units Per Plastic Tube 

1 2, 4 3 ~~an~~ 1 ~~>~~ 2 **TO−247** 3 **CASE 340AL MARKING DIAGRAM** MUR30x0WT AYWWG ~~||~~ UNA MUR30x0WT = Device Code x = 2, 4 or 6 A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package 

## **ORDERING INFORMATION** 

- *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. 

|**Device**|**Package**|**Shipping**|
|---|---|---|
|MUR3020WTG|TO−247<br>(Pb−Free)|30 Units/Rail|
|MUR3040WTG|TO−247<br>(Pb−Free)|30 Units/Rail|
|MUR3060WTG|TO−247<br>(Pb−Free)|30 Units/Rail|



Publication Order Number: **MUR3020WT/D** 

**1** 

© Semiconductor Components Industries, LLC, 2014 **July, 2014 − Rev. 7** 

**MUR3020WTG, MUR3040WTG, MUR3060WTG** 

## **MAXIMUM RATINGS** (Per Leg) 

|**MAXIMUM RATINGS**(Per Leg)||||||
|---|---|---|---|---|---|
|**Rating**|**Symbol**|**MUR3020WT**|**MUR3040WT**|**MUR3060WT**|**Unit**|
|Peak Repetitive Reverse Voltage<br>Working Peak Reverse Voltage<br>DC Blocking Voltage|VRRM<br>VRWM<br>VR|200|400|600|V|
|Average Rectified Forward Current @ 145°C<br>Total Device|IF(AV)|15<br>30|||A|
|Peak Repetitive Surge Current<br>(Rated VR, Square Wave, 20 kHz, TC= 145°C)|IFM|30|||A|
|Nonrepetitive Peak Surge Current (Surge applied at rated load<br>conditions, halfwave, single phase, 60 Hz)|IFSM|200|150|150|A|
|Operating Junction and Storage Temperature|TJ, Tstg|−65 to +175|||°C|



Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 

## **THERMAL CHARACTERISTICS** (Per Leg) 

|**THERMAL CHARACTERISTICS**(Per Leg)||||||
|---|---|---|---|---|---|
|**Rating**|**Symbol**|**MUR3020WT**|**MUR3040WT**|**MUR3060WT**|**Unit**|
|Maximum Thermal Resistance,<br>− Junction−to−Case<br>− Junction−to−Ambient|R�JC<br>R�JA|1.5<br>40|||°C/W|



## **ELECTRICAL CHARACTERISTICS** (Per Leg) 

|**ELECTRICAL CHARACTERISTICS**(Per Leg)||||||
|---|---|---|---|---|---|
|**Rating**|**Symbol**|**MUR3020WT**|**MUR3040WT**|**MUR3060WT**|**Unit**|
|Maximum Instantaneous Forward Voltage (Note 1)<br>(IF= 15 Amp, TC= 150°C)<br>(IF= 15 Amp, TC= 25°C)|VF|0.85<br>1.05|1.12<br>1.25|1.4<br>1.7|V|
|Maximum Instantaneous Reverse Current (Note 1)<br>(Rated DC Voltage, TJ= 150°C)<br>(Rated DC Voltage, TJ= 25°C)|iR|500<br>10|500<br>10|1000<br>10|�A|
|Maximum Reverse Recovery Time (iF= 1.0 A, di/dt = 50 Amps/�s)|trr|35|60|60|ns|
|Typical Peak Reverse Recovery Current<br>(IF= 1.0 A, di/dt = 50 A/�s)|IRM|0.7|||A|



Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse Test: Pulse Width = 300 � s, Duty Cycle ≤ 2.0%. 

**http://onsemi.com** 

**2** 

**MUR3020WTG, MUR3040WTG, MUR3060WTG** 

## **MUR3020WT** 

**==> picture [239 x 381] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>TJ = 150°C 100 ° C<br>25°C<br>50<br>30<br>20<br>10<br>5<br>3<br>2<br>1<br>0.5<br>0.3<br>0.2<br>0.1<br>0.2 0.4 0.6 0.8 1 1.2 1.4 1.6<br>vF, INSTANTANEOUS VOLTAGE (VOLTS)<br>iF, INSTANTANEOUS FORWARD CURRENT (AMPS)<br>**----- End of picture text -----**<br>


**Figure 1. Typical Forward Voltage (Per Leg)** 

**==> picture [247 x 165] intentionally omitted <==**

**----- Start of picture text -----**<br>
100 TJ = 150°C<br>50<br>20 100°C<br>10<br>5<br>2<br>1<br>0.5 25°C<br>0.2<br>0.1<br>0.05<br>0.02<br>0.01<br>0 20 40 60 80 100 120 140 160 180 200<br>VR, REVERSE VOLTAGE (VOLTS)<br>A)<br>μ<br>IR, REVERSE CURRENT (<br>**----- End of picture text -----**<br>


*The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 

**Figure 2. Typical Reverse Current (Per Leg)*** 

**==> picture [243 x 167] intentionally omitted <==**

**----- Start of picture text -----**<br>
16<br>14<br>dc<br>12<br>10<br>SQUARE WAVE<br>8<br>6<br>4<br>RATED VOLTAGE APPLIED<br>2<br>0140 150 160 170 180<br>TC, CASE TEMPERATURE (5C)<br>IF(AV), AVERAGE FORWARD CURRENT (AMPS)<br>**----- End of picture text -----**<br>


**Figure 3. Current Derating, Case (Per Leg)** 

**==> picture [491 x 169] intentionally omitted <==**

**----- Start of picture text -----**<br>
14 16<br>dc (RESISTIVE LOAD) [I][PK] = π<br>12 R�JA = 15°C/W AS OBTAINED 14 I AV<br>USING A SMALL FINNED<br>10 HEAT SINK. 12 (CAPACITIVE LOAD) [I] [PK] = 5<br>IAV dc<br>SQUARE WAVE 10<br>8 10<br>8<br>20<br>6 dc<br>6<br>4 SQUARE WAVE<br>SQUARE WAVE 4<br>2 R� JA = 40°C/W TJ = 125°C<br>AS OBTAINED IN FREE AIR 2<br>WITH NO HEAT SINK.<br>0 0 20 40 60 80 100 120 140 160 180 200 0 0 2 4 6 8 10 12 14 16<br>TA, AMBIENT TEMPERATURE (5C) IF(AV), AVERAGE FORWARD CURRENT (AMPS)<br>IF(AV), AVERAGE FORWARD CURRENT (AMPS) PF(AV) , AVERAGE POWER DISSIPATION (WATTS)<br>**----- End of picture text -----**<br>


**Figure 4. Current Derating, Ambient (Per Leg)** 

**Figure 5. Power Dissipation (Per Leg)** 

**http://onsemi.com** 

**3** 

**MUR3020WTG, MUR3040WTG, MUR3060WTG** 

## **MUR3040WTG** 

**==> picture [245 x 612] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>50<br>100 ° C<br>TJ = 150°C 25°C<br>30<br>20<br>10<br>5<br>3<br>2<br>1<br>0.5<br>0.3<br>0.2<br>0.1<br>0.2 0.4 0.6 0.8 1 1.2 1.4 1.6<br>vF, INSTANTANEOUS VOLTAGE (VOLTS)<br>Figure 6. Typical Forward Voltage (Per Leg)<br>14<br>dc<br>12<br>RθJA = 15°C/W AS OBTAINED<br>10 USING A SMALL FINNED<br>HEAT SINK.<br>SQUARE WAVE<br>8<br>6 dc<br>4<br>SQUARE WAVE<br>2 RθJA = 40°C/W<br>AS OBTAINED IN FREE AIR<br>WITH NO HEAT SINK.<br>0 0 20 40 60 80 100 120 140 160 180 200<br>TA, AMBIENT TEMPERATURE (°C)<br>iF, INSTANTANEOUS FORWARD CURRENT (AMPS)<br>IF(AV), AVERAGE FORWARD CURRENT (AMPS)<br>**----- End of picture text -----**<br>


**Figure 9. Current Derating, Ambient (Per Leg)** 

**==> picture [240 x 168] intentionally omitted <==**

**----- Start of picture text -----**<br>
100 TJ = 150°C<br>50<br>20 100°C<br>10 25°C<br>5<br>2<br>1<br>0.5<br>0.2<br>0.1<br>0.05<br>0.02<br>0.01<br>0 50 100 150 200 250 300 350 400 450 5<br>VR, REVERSE VOLTAGE (VOLTS)<br>A)<br>μ<br>IR, REVERSE CURRENT (<br>**----- End of picture text -----**<br>


*The curves shown are typical for the highest voltage device in the voltage groupin Typical reverse current for lower voltage selections can be estimated from these sam curves if VR is sufficiently below rated VR. 

**Figure 7. Typical Reverse Current (Per Leg)*** 

**==> picture [235 x 385] intentionally omitted <==**

**----- Start of picture text -----**<br>
16<br>14<br>dc<br>12<br>10<br>SQUARE WAVE<br>8<br>6<br>4<br>RATED VOLTAGE APPLIED<br>2<br>0140 150 160 170 1<br>TC, CASE TEMPERATURE (°C)<br>Figure 8. Current Derating, Case (Per Leg)<br>16<br>(RESISTIVE-INDUCTIVE LOAD) [I][PK] = π<br>14 IAV<br>(CAPACITIVE LOAD) [I][PK] = 5 dc<br>12 IAV<br>10<br>10<br>20<br>SQUARE WAVE<br>8<br>6<br>4 TJ = 125°C<br>2<br>0 0 2 4 6 8 10 12 14<br>IF(AV), AVERAGE FORWARD CURRENT (AMPS)<br>IF(AV), AVERAGE FORWARD CURRENT (AMPS)<br>PF(AV) , AVERAGE POWER DISSIPATION (WATTS)<br>**----- End of picture text -----**<br>


**Figure 10. Power Dissipation (Per Leg)** 

**http://onsemi.com** 

**4** 

**MUR3020WTG, MUR3040WTG, MUR3060WTG** 

## **MUR3060WT** 

**==> picture [243 x 382] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>50<br>TJ = 150°CJ = 150°C = 150°C°CC<br>30<br>100°C°CC<br>20<br>25°C°CC<br>10<br>5<br>3<br>2<br>1<br>0.5<br>0.3<br>0.2<br>0.1<br>0.2 0.4 0.6 0.8 1 1.2 1.4 1.6<br>vF, INSTANTANEOUS VOLTAGE (VOLTS)F, INSTANTANEOUS VOLTAGE (VOLTS), INSTANTANEOUS VOLTAGE (VOLTS)<br>iF, INSTANTANEOUS FORWARD CURRENT (AMPS)<br>**----- End of picture text -----**<br>


**==> picture [245 x 169] intentionally omitted <==**

**----- Start of picture text -----**<br>
200<br>100<br>50 TJ = 150°C<br>20<br>10 100°C°CC<br>5<br>2<br>1<br>0.5 25°C°CC<br>0.2<br>0.1<br>0.05<br>0.02<br>150 200 250 300 350 400 450 500 550 600 650<br>VR, REVERSE VOLTAGE (VOLTS)R, REVERSE VOLTAGE (VOLTS), REVERSE VOLTAGE (VOLTS)<br>A)<br>μ<br>IR, REVERSE CURRENT (<br>**----- End of picture text -----**<br>


**==> picture [492 x 549] intentionally omitted <==**

**----- Start of picture text -----**<br>
TJ = 150°CJ = 150°C = 150°C°CC 100°C°CC<br>5<br>30<br>100°C°CC 2<br>20 1<br>0.5<br>25°C°CC 25°C°CC<br>0.2<br>10 0.1<br>0.05<br>0.02<br>150 200 250 300 350 400 450 500 550 600 650<br>5<br>VR, REVERSE VOLTAGE (VOLTS)R, REVERSE VOLTAGE (VOLTS), REVERSE VOLTAGE (VOLTS)<br>*The curves shown are typical for the highest voltage device in the voltage grouping.<br>3 Typical reverse current for lower voltage selections can be estimated from these same<br>curves if VR is sufficiently below rated VR.<br>2 Figure 12. Typical Reverse Current (Per Leg)*<br>16<br>1 14<br>dc<br>12<br>SQUARE WAVE<br>0.5 10<br>8<br>0.3<br>6<br>0.2<br>4<br>RATED VOLTAGE APPLIED<br>2<br>0.1<br>0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 0<br>vF, INSTANTANEOUS VOLTAGE (VOLTS)F, INSTANTANEOUS VOLTAGE (VOLTS), INSTANTANEOUS VOLTAGE (VOLTS) 140 150 160 170 180<br>TC, CASE TEMPERATURE (5C)<br>Figure 11. Typical Forward Voltage (Per Leg) Figure 13. Current Derating, Case (Per Leg)<br>10 16<br>9 dc FROM A SMALL TO-220R �JA  = 16°C/W AS OBTAINED 14 (CAPACITIVE LOAD) I [I] AV [PK] = 5 dc<br>8 HEAT SINK. 10<br>12<br>7 SQUARE WAVE<br>6 10 20 SQUARE WAVE<br>5 8<br>4 dc 6 (RESISTIVE-INDUCTIVE LOAD)<br>3 IPK = π<br>2 SQUARE WAVER�JA = 60°C/W 4 TJ = 125°C IAV<br>1 AS OBTAINED IN FREE AIR 2<br>WITH NO HEAT SINK.<br>0<br>0 20 40 60 80 100 120 140 160 180 200 0 0 2 4 6 8 10 12 14 16<br>TA, AMBIENT TEMPERATURE (5C) IF(AV), AVERAGE FORWARD CURRENT (AMPS)<br>IR, REVERSE CURRENT (<br>iF, INSTANTANEOUS FORWARD CURRENT (AMPS)<br>IF(AV), AVERAGE FORWARD CURRENT (AMPS)<br>IF(AV), AVERAGE FORWARD CURRENT (AMPS) PF(AV) , AVERAGE POWER DISSIPATION (WATTS)<br>**----- End of picture text -----**<br>


**Figure 14. Current Derating, Ambient (Per Leg)** 

**Figure 15. Power Dissipation (Per Leg)** 

**http://onsemi.com** 

**5** 

**MUR3020WTG, MUR3040WTG, MUR3060WTG** 

**==> picture [484 x 176] intentionally omitted <==**

**----- Start of picture text -----**<br>
1<br>D = 0.5<br>0.5<br>0.2 0.1<br>0.1 0.05 P(pk) Z R � � JC(t) JC = 1.5  = r(t ° ) C/W MAX  R�JC<br>0.01 D CURVES APPLY FOR POWER<br>0.05 t1 PULSE TRAIN SHOWN<br>SINGLE PULSE t2 READ TIME AT T1<br>0.02 DUTY CYCLE, D = t1/t2 T J(pk) - T C  = P (pk)  Z �JC(t)<br>0.01<br>0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1K<br>r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) t, TIME (ms)<br>**----- End of picture text -----**<br>


**Figure 16. Thermal Response** 

**==> picture [233 x 160] intentionally omitted <==**

**----- Start of picture text -----**<br>
1K<br>500 TJ = 25°C<br>200<br>100<br>50<br>20<br>10<br>1 2 5 10 20 50 100<br>VR, REVERSE VOLTAGE (VOLTS)<br>C, CAPACITANCE (pF)<br>**----- End of picture text -----**<br>


**Figure 17. Typical Capacitance (Per Leg)** 

**http://onsemi.com** 

**6** 

MECHANICAL CASE OUTLINE **PACKAGE DIMENSIONS** 

**==> picture [270 x 39] intentionally omitted <==**

**----- Start of picture text -----**<br>
TO−247<br>CASE 340AL<br>ISSUE D<br>DATE 17 MAR 2017<br>**----- End of picture text -----**<br>


**==> picture [492 x 667] intentionally omitted <==**

**----- Start of picture text -----**<br>
TO−247<br>CASE 340AL<br>ISSUE D<br>DATE 17 MAR 2017<br>NOTES:<br>> SCALE 1:1 1.2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.CONTROLLING DIMENSION: MILLIMETERS.<br>NOTE 4 A B SEATINGPLANE 0.635 [M] B A [M] 3.4. SLOT REQUIRED, NOTCH MAY BE ROUNDED.DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH.<br>E A P NOTE 6 MOLD FLASH SHALL NOT EXCEED 0.13 PER SIDE. THESE<br>DIMENSIONS ARE MEASURED AT THE OUTERMOST<br>E2/2 cae EXTREME OF THE PLASTIC BODY.<br>5. LEAD FINISH IS UNCONTROLLED IN THE REGION DEFINED BY<br>E2 Q S 6. L1.∅P SHALL HAVE A MAXIMUM DRAFT ANGLE OF 1.5° TO THE<br>NOTE 4 TOP OF THE PART WITH A MAXIMUM DIAMETER OF 3.91.<br>D 7. DIMENSION A1 TO BE MEASURED IN THE REGION DEFINED<br>NOTE 3 BY L1.<br>4<br>MILLIMETERS<br>1 2 3 DIM MIN MAX<br>A 4.70 5.30<br>2XF L1 A1 2.20 2.60<br>b 1.07 1.33<br>b2 1.65 2.35<br>L NOTE 5 b4 2.60 3.40<br>c 0.45 0.68<br>D 20.80 21.34<br>E 15.50 16.25<br>E2 4.32 5.49<br>2X b2 c e 5.45 BSC<br>b4 A1 LF 19.802.655 20.80---<br>3X b NOTE 7 L1 3.81 4.32<br>i e 0.25 [M] B | A [M] i QP 3.555.40 3.656.20<br>S 6.15 BSC<br>GENERIC<br>MARKING DIAGRAM*<br>XXXXXXXXX<br>AYWWG<br>XXXXX = Specific Device Code<br>A = Assembly Location<br>Y = Year<br>WW = Work Week<br>G = Pb−Free Package<br>*This information is generic. Please refer<br>to device data sheet for actual part<br>marking.<br>Pb−Free indicator, “G” or microdot “ ”,<br>may or may not be present.<br>Electronic versions are uncontrolled except when accessed directly from the Document Repository.<br>DOCUMENT NUMBER: 98AON16119F Printed  versions are uncontrolled  except when stamped  “CONTROLLED COPY” in red.<br>DESCRIPTION: TO−247 PAGE 1 OF 1<br>——————<br>ON Semiconductor and          are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.<br>ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding<br>the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically<br>disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the<br>rights of others.<br>**----- End of picture text -----**<br>


www.onsemi.com 

© Semiconductor Components Industries, LLC, 2019 

**onsemi** , , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “ **onsemi** ” or its affiliates and/or subsidiaries in the United States and/or other countries. **onsemi** owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of **onsemi’s** product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. **onsemi** reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and **onsemi** makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does **onsemi** assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using **onsemi** products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by **onsemi** . “Typical” parameters which may be provided in **onsemi** data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. **onsemi** does not convey any license under any of its intellectual property rights nor the rights of others. **onsemi** products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use **onsemi** products for any such unintended or unauthorized application, Buyer shall indemnify and hold **onsemi** and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that **onsemi** was negligent regarding the design or manufacture of the part. **onsemi** is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. 

## **PUBLICATION ORDERING INFORMATION** 

**LITERATURE FULFILLMENT** : **TECHNICAL SUPPORT Email Requests to:** orderlit@onsemi.com **North American Technical Support: Europe, Middle East and Africa Technical Support:** Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 00421 33 790 2910 **onsemi Website:** www.onsemi.com Phone: 011 421 33 790 2910 For additional information, please contact your local Sales Representative 

◊ 

**==> picture [232 x 43] intentionally omitted <==**