MUR120-T

**MUR120** 

## **1.0A SUPER-FAST GLASS PASSIVATED RECTIFIER** 

## **Features** 

|**Features**|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Glass Passivated Die Construction|||||||||||||
|Super-Fast Recovery Time For High Efficiency|||||||||||||
|Low Forward Voltage Drop and High Current Capability<br>Surge Overload Rating to 35A Peak<br>**Lead Free Finish, RoHS Compliant (Note 3)**|~~A~~<br>B<br>~~Pte~~|||||||~~A~~<br>|4,||||
|**Mechanical Data**|||||D||||||C||
|Case:  DO-41|||||||||||||
|Case Material: Molded Plastic. UL Flammability<br>Classification Rating 94V-0<br>Moisture Sensitivity:  Level 1 per J-STD-020C<br>Terminals: Finish - Bright Tin. Solderable per<br>MIL-STD-202, Method 208<br>Polarity: Cathode Band<br>Ordering Information:  See Last Page<br>Marking: R120|||**DO-41 Plastic**<br>**Dim**<br>**Min**<br>**Max**<br>**A**<br>25.40<br>**B**<br>4.06<br>5.21<br>**C**<br>0.71<br>0.864<br>**D**<br>2.00<br>2.72||||||||||
|Weight: 0.34 grams (approximate)|||**All Dimensions in mm**||||**All Dimensions in mm**||||||



## **Mechanical Data** 

Case:  DO-41 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity:  Level 1 per J-STD-020C Terminals: Finish - Bright Tin. Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Ordering Information:  See Last Page Marking: R120 Weight: 0.34 grams (approximate) 

**Maximum Ratings and Electrical Characteristics** @ TA = 25 C unless otherwise specified 

Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. 

|Single phase, half wave, 60Hz, resistive or inductive load.<br>For capacitive load, derate current by 20%.||||
|---|---|---|---|
|**Characteristic**<br>~~a~~|**Symbol**|**Value**|**Unit**|
|Peak Repetitive Reverse Voltage<br>Working Peak Reverse Voltage<br>DC Blocking Voltage<br>~~a~~<br>~~i~~<br>**p**o|VRRM<br>VRWM<br>VR|200|V|
|RMS Reverse Voltage<br>**p**o<br>~~**e**e ee~~|VR(RMS)<br>~~ee~~|140<br>~~ee~~|V|
|Average Rectified Output Current<br>@ TL= 130 C<br>**p**o<br>~~**e**e ee~~|IO<br>~~e~~<br>~~ee~~|1.0<br>~~e~~<br>~~ee~~|A<br>~~e~~|
|Non-Repetitive Peak Forward Surge Current<br>8.3ms Single half sine-wave Superimposed on Rated Load<br>(JEDEC Method)<br>~~**e**e ee~~|IFSM<br>~~ee~~<br>ee|35<br>~~ee~~|A|
|Forward Voltage                            @ IF= 1.0A, TJ = 25°C<br>@ IF= 1.0A, TJ = 150°C<br>~~**e**e ee~~|VFM<br>~~ee~~<br>~~e~~<br>ee|0.875<br>0.710<br>~~ee~~<br>~~e~~|V<br>~~e~~|
|Peak Reverse Current<br>@ TJ=   25 C<br>at Rated DC Blocking Voltage<br>@ TJ= 150 C<br>~~ee~~<br>pO|IRM<br>ee<br>~~ee~~|2.0<br>50<br>~~ee~~|A<br>~~ee~~|
|Reverse Recovery Time (Note 2)<br>pO|trr|25|ns|
|Typical Junction Capacitance (Note 1)<br>pO<br>~~GG~~|Cj<br>~~GG~~|27<br>~~GG~~|pF<br>~~GG~~|
|Typical Thermal Resistance, Junction to Lead<br>~~pe~~|R JL<br>~~pe~~|50<br>~~pe~~|K/W<br>~~pe~~|
|Operating and Storage Temperature Range<br>~~a~~|Tj, TSTG<br>~~fe~~|-55 to +150<br>~~fe~~|C<br>~~fe~~|



Notes:     1.   Measured at 1.0MHz and applied reverse voltage of 4V DC. 

2.   Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 6. 

3. RoHS revision 13.2.2003.  Glass and High Temperature Solder Exemptions Applied, see _EU Directive Annex Notes 5 and 7._ 

DS30178 Rev. 3 - 2 

1 of 3 **www.diodes.com** 

MUR120 Diodes Incorporated 

**==> picture [506 x 472] intentionally omitted <==**

**----- Start of picture text -----**<br>
10<br>1.5<br>a GdAO<br>ae -___—YAY<br>TJ = 150°C<br>SR eee seen<br>1.0<br>| 1.0 ca T ae J = 25°C ene<br>_----—_-=<br>eee a A<br>0.5<br>Pulse Width - 300us<br>COCCCA  ARRREEEESa A A<br>0<br>0.1<br>0 25 50 75 100 125 150 175 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0<br>TL, LEAD TEMPERATURE (°C) VF, INSTANTANEOUS FORWARD VOLTAGE (V)<br>Fig. 1 Forward Current Derating Curve<br>Fig. 2  Typical Forward Characteristics<br>100<br>60<br>Single Half-Sine-Wave TT ¢Ss SSeS SSSS RSSS SS SS SS SS SSS<br>(JEDEC Method) E pf | | | ft ft ft ff<br>50 if 10 |_| 0 | ||<br>: == TJ = 150 C ——<br>» eS cre<br>S) pf | ft<br>40<br>1.0<br>TJ = 125 C0<br>30 N [SSw> |—| | |a| SS|eeff] Tf=<br>N\ Se a<br>0.1<br>20 N Wy a a ee ee ee<br>S ee<br>fe) ee a ee ee<br>10 TP FUL 0.01 TJ = 25 C0 | | | |<br>ss — SSS SSS<br>0 Z ce SO<br>1 10 100 0.001<br>#~ [| | | | | | | | Tf<br>NUMBER OF CYCLES AT 60Hz 0 20 40 60 80 100 120 140 160 180 200<br>Fig. 3 Surge Current Derating Curve<br>, AVERAGE RECTIFIED CURRENT (A)<br>IO<br>, INSTANTANEOUS FORWARD CURRENT (A)<br>IF<br>, PEAK FORWARD SURGE CURRENT (A)<br>IFSM<br>**----- End of picture text -----**<br>


VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 4 Typical Reverse Characteristics 

DS30178 Rev. 3 - 2 

2 of 3 **www.diodes.com** 

MUR120 

1000 

**==> picture [238 x 226] intentionally omitted <==**

**----- Start of picture text -----**<br>
a T  = 2 j 5°C U<br>f = 1MHz<br>HEF<br>Po |<br>ee | ee |<br>eeaee<br>100<br>IE — rel<br>ee<br>po TT<br>po<br>a eeel<br>10<br>1 4 10 100<br>VR, REVERSE VOLTAGE (V)<br>Fig. 5  Typical Total Capacitance<br>, TOTAL CAPACITANCE (pF)<br>T<br>C<br>**----- End of picture text -----**<br>


**==> picture [7 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
t rr<br>**----- End of picture text -----**<br>


**==> picture [256 x 152] intentionally omitted <==**

**----- Start of picture text -----**<br>
500 NI(Noninductive) 100NI +0.5A<br>Device<br>Under (-)<br>Test 0A<br>(+)<br>50V DC Pulse<br>: Approx Generator -0.25A<br>(-) (Note 2)<br>]<br>Oscilloscope (+)<br>(Note 1)<br>j<br>Notes: -1.0A<br>**----- End of picture text -----**<br>


Set time base for 50/100 ns/cm 

Fig. 6 Reverse Recovery Time Characteristic and Test Circuit 

## **Ordering Information** (Note 4) 

|**Ordering Information**<br>(Note 4)|||
|---|---|---|
|**Device**|**Packaging**|**Shipping**|
|MUR120-A|DO-41|5K/Ammo Pack|
|MUR120-B|DO-41|1K/Bulk|
|MUR120-T|DO-41|5K/Tape & Reel, 13-inch|



Notes:     4.   For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf 

DS30178 Rev. 3 - 2 

3 of 3 **www.diodes.com** 

MUR120