MRM3-2400/5500-3C-BLK-120

US Office: Tel: 800.648.2800 or +1.847.671.6690 UK Office: Tel: (+44) 1543 459 555 www.mobilemark.com a n t e n n a  s o l u t i o n s 

## **Surface Mount Micro WiFi, WiMAX & 4.9 Public Safety** 

- Mounts easily to vehicle or fixed utility box with a small 9/16” mounting hole (14.3 mm) 

- Impressive 2.5 dBi gain in a thumb-sized radome 

**==> picture [67 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
MRM Body<br>Mount Antenna<br>**----- End of picture text -----**<br>


- Rugged and weather tight ASA radome with foam sealing gasket 

The MRM Stud mount series are micro-antennas that provide gain and performance that is close to larger products. 

A variety of single and dual band models are available for different broadband data system for WiFi and WiMAX applications.  The MRM-UMB model, for example, covers 1.7-6.0 GHz. 

The MRM Series antenna radome consists of white or black UV resistant plastic with a heavy duty metal base. 

The bottom mounting plate is outfitted with a foam gasket for complete outdoor weather sealing. 

The MRM antenna design is “thumb” sized, only 1.35” H x 1” D (34 mm x 25mm).  These antennas have a 1/2” diameter stud (13 mm) for mounting on up to 3/8” thick surface (9.5mm). 

To mount the antenna, access to the underside of the body surface is required. A Hex mounting nut is also provided. 

The antennas are normally outfitted with 1 foot  (305 mm) of low loss -195 cable with an SMA Plug (Male) connector. Antennas can be factory ordered with any cable length and connector required. Jumper cables can be provided for completing a longer installation. 

Peak antenna gain performance is 2.5 dBi for the MRM Series. The antennas should be mounted on metal for best overall performance. 

**==> picture [246 x 206] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||
|---|---|---|---|---|
|Specifications|
|Frequency:         See above|
|Gain:            2.5 dBi peak|
|VSWR:           2:1 max over range|
|Operating Temp:       -40|[o]|to +85|[o]|C|
|Nominal Impedance:     50 ohms|
|Maximum Power:      10 watts|
|Radome/Mount:       1.0” diameter x 1.35” high|
|(25 mm x 34 mm)|
|Case Material:        ASA plastic, UV Resistant|
|Hardware Supplied:     Nut & sealing gasket|
|(gasket attached)|
|Mounting:            1/2” Diameter stud (13 mm)|
|5/8” L (16 mm) for 3/8”|
|thick surface( 9.5 mm)|

**----- End of picture text -----**<br>


**Model #             Frequency** MRM3-2400-3C-BLK-12       2.4-2.5 GHz MRM3-2600-3C-BLK-12       2.5-2.7 GHz MRM3-3500-3C-BLK-12        3.3-3.7 GHz MRM3-5500-3C-BLK-12       4.9-6.0 GHz MRM-UMB-3C-BLK-12                  1.7-6.0 GHz MRM3-2400/5500-3C-BLK-12    2.4-2.5 & 4.9 - 6.0 GHz 

Color options available for above models WHT-White or BLK-Black 

**==> picture [246 x 171] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||
|---|---|
|Pigtail Cable :      Low loss-195, 1 foot|
|(305 mm),  request longer|
|lengths at time of order|
|Pigtail Connector:    SMA Plug (Male),|
|others available, please specify|
|Jumper/Cable Option:  Use jumpers (cable assemblies)|
|for longer installation|
|Shock & Vibration:|EN 61373, IEEE 1478, MIL-810G|
|TIA-329.2-C|
|Water Ingress:                        IP67|

**----- End of picture text -----**<br>


Specifications subject to change without notice (03/2017) 

Made in the USA 

79