Image not available
Illustrative purposes only
MRM-UMB-3J-BLK-12
RF Antenna, 1.7 to 6GHz, CBRS / LTE / WiFi, 2.5dBi, 10W, RP SMA Connector
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MOBILE MARK
- Product type:
- Gain: 2.5dBi
- SVHC: To Be Advised
- VSWR: 2
- Input Power: 10W
- Antenna Type: CBRS / LTE / WiFi
- Frequency Max: 6GHz
- Frequency Min: 1.7GHz
- Product Range: MRM Series
- Input Impedance: 50ohm
- Antenna Mounting: RP SMA Connector
- Antenna Polarisation: -
| Delivery and price | |
|---|---|
| Units per pack | 50 |
| Price | 38.37 € |
| Current stock | 10+ |
| Lead time | 30 days |
US Office: Tel: 800.648.2800 or +1.847.671.6690 UK Office: Tel: (+44) 1543 459 555 www.mobilemark.com a n t e n n a s o l u t i o ns ## **Surface Mount Micro WiFi, CBRS & 4.9 Public Safety** - Mounts easily to vehicle or fixed utility box with a small 9/16” mounting hole (14.3 mm) - Impressive 2.5 dBi gain in a thumb-sized radome MRM Body Mount Antenna The MRM Stud mount series are micro-antennas that provide gain and performance that is close to larger products. A variety of single and dual band models are available for different broadband data system for WiFi and CBRS applications. The MRMUMB model, for example, covers Private LTE networks on CBRS (Citizen Band Radio Service) at 3.5 GHz. The MRM antenna design is “thumb” sized, only 1.35” H x 1” D (34 mm x 25mm). These antennas have a 1/2” diameter stud (13 mm) for mounting on up to 3/8” thick surface (9.5mm). To mount the antenna, access to the underside of the body surface is required. A Hex mounting nut is also provided. The antennas are normally outfitted with 1 foot (305 mm) of RF-195 cable with an SMA Plug Reverse polarity connector. Jumper cables can be provided for completing a longer installation. Peak antenna gain performance is 2.5 dBi for the MRM Series. The antennas should be mounted on metal for best overall performance. ## **Specifications** Frequency: See above Gain: 2.5 dBi peak VSWR: 2:1 max over range Operating Temp: -40[o] to +85[o] C Nominal Impedance: 50 ohms Maximum Power: 10 watts Radome/Mount: 1.0” diameter x 1.35” high (25 mm x 34 mm) Case Material: ASA plastic, UV Resistant Hardware Supplied: Nut & sealing gasket (gasket attached) Mounting: 1/2” Diameter stud (13 mm) 5/8” L (16 mm) for 3/8” thick surface( 9.5 mm) - Rugged and weather tight ASA radome with foam sealing gasket The MRM Series antenna radome consists of black UV resistant plastic with a heavy duty metal base. The bottom mounting plate is outfitted with a foam gasket for complete outdoor weather sealing. **Model # Frequency** MRM-UMB-3J-BLK-12 1.7-6.0 GHz ~~=~~ Pigtail Cable : RF-195, 1 foot (30cm), Pigtail Connector: SMA Plug Revere Polarity, Jumper/Cable Option: Use jumpers (cable assemblies) for longer installation Shock & Vibration: EN 61373, IEEE 1478, MIL-810G TIA-329.2-C Water Ingress: IP67 79 Specifications subject to change without notice (9/2018)
Updated at June 9, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →