MPM-30-15

30W High Reliable Green Medical Encapsulated Type 

M Pp M ~~=~~ 3 0 series 

~~|~~ 

**==> picture [14 x 23] intentionally omitted <==**

**----- Start of picture text -----**<br>
cs<br>)<br>**----- End of picture text -----**<br>


cis CB CE fil ANSI/AAMI ES60601- ~~1~~ EN60601- ~~1~~ IEC60601- ~~1~~ 

## @ Features 

- 2 ~~.~~ 73"x1 ~~.~~ 53" compact size 

- Medical safety approved (2 x MOPP) according to ANSI/AAMI ES60601- ~~1~~ and IEC/EN60601- ~~1~~ 

- Suitable for BF application with appropriate system consideration 

- No load power consumption< ~~0.~~ 075W 

- Extremely low leakage current 

## Hi Applications 

   - Portable medical device 

   - Mobile clinical workstation 

   - Medical computer monitor 

   - Medical examination instrument 

- Wide operating temp ~~.~~ range ~~-~~ 40 ~ +85°C 

- EMI class B for class II configuration 

- Protections: Short circuit / Overload / Over voltage 

- No minimum load required 

- 3 years warranty 

## HM Description 

MPM- ~~3~~ 0 is a 30W high density and small size (69 ~~.~~ 5x39x24mm) AC/DC module type medical power supply series offered in pin type. It features the operation for 80~264VAC, a low no load power consumption less than 0 ~~.~~ 075W, a high efficiency up to 91%, Class II (no FG) double insulation, outstanding dissipation and high lifespan thanks to the interior potting, 5G anti ~~-~~ vibration, high EMC performance, 4KVAC isolation, etc. The design observes IEC/EN60601- ~~1~~ and ANSI/AAMI ES60601- ~~1~~ version three with 2xMOPP level and ultra ~~-~~ low leakage current (<80 A). Itis very suitable for BF (patient contact) type medical device or relevant equipment. In addition to PCB mounting style, MPM- ~~3~~ 0 series also offers the screw terminal style model (ST). 

MH Model Encoding Blank : PCB mounting style ~~MPM~~ - ~~30~~ - ~~5~~ ST ~~-——~~ | ST : Screw terminal style Rated wattage | L Output voltage Series name 

File Name:MPM-30 ~~-~~ SPEC 2019 ~~-~~ 03 ~~-~~ 13 

M P M ~~™~~ 3 0 series 

## Vi V|V 30W High Reliable Green Medical Encapsulated Type 

## seen eee ee ee ee ee ee ee 

**==> picture [513 x 621] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|wove,||mm|eao|-3.32)|m|m|e|a|o-st)|mm|e|s|o|t2-)|wew|eso|-15.)MPw|a0|-240)—(M|Pwa|n~@l)||
|ourpuT|
|INPUT|
|PROTECTION|
|ENVIRONMENT|
|EMC|EMISSION|
|—SEN|S|IO|O|OSS|
|SAFETY|&|NVotageFicker|
|EMC|
|EMC|IMMUNITY|
|OTHERS|[DIMENSION|||PCB|mouning sje|6'39'24nm|(WH) or2.79°1.59°0 84" ch|Seen tinal|styl:|O150528 Sm (WH)|o|3.581 58.12|nc]|

**----- End of picture text -----**<br>


2. No minimum load required. 

3. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 

4. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair ~~-~~ wire terminated with a 0 ~~.~~ 1 « f & 47 «f parallel capacitor. 5. Tolerance: includes set up tolerance, line regulation and load regulation. 

6. Derating may be needed under low input voltages. Please check the derating curve for more details. 

7. Touch current was measured from primary input to DC output. 

8. The ambient temperature derating of 3 ~~.~~ 5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft) 

9. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re ~~-~~ confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies. ~~”~~ (as available on http:/www ~~.~~ meanwell ~~.~~ com) 

File Name:MPM-30 ~~-~~ SPEC 2019 ~~-~~ 03 ~~-~~ 13 

**==> picture [511 x 716] intentionally omitted <==**

**==> picture [511 x 716] intentionally omitted <==**