MPM-15-5

15W High Reliable Green Medical Encapsulated Type 

**==> picture [139 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
M P M = 1 5 series<br>**----- End of picture text -----**<br>


ANSI/AAMIES60601- ~~1~~ EN60601- ~~1~~ — IEC60601- ~~1~~ 

## @ Features 

- 2 ~~.~~ 06"x1 ~~.~~ 07" compact size 

- Medical safety approved (2 x MOPP) according to ANSI/AAMI ES60601- ~~1~~ and IEC/EN60601- ~~1~~ 

- Suitable for BF application with appropriate system consideration 

**==> picture [86 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
Medical 2xMOPP BF rated<br>**----- End of picture text -----**<br>


## Hi Applications 

   - Portable medical device 

   - Mobile clinical workstation 

   - Medical computer monitor 

   - Medical examination instrument 

- No load power consumption<0.075W (0.09W for 3 ~~.~~ 3V) 

- Extremely low leakage current 

- Wide operating temp ~~.~~ range ~~-~~ 40 ~ +85°C 

- EMI class B for class II configuration 

- Protections: 

- Short circuit / Overload / Over voltage / Over temperature 

- No minimum load required 

- 3 years warranty 

## HM Description 

MPM- ~~1~~ 5 is a 15W high density and small size (52 ~~.~~ 4*2 ~~7~~ .2*24mm) AC/DC module type medical power supply series offered in pin type. It features the operation for 80~264VAC, a low no load power consumption less than 0 ~~.~~ 075W (0.09W for 3.3V), a high efficiency up to 87%, Class II (no FG) double insulation, outstanding dissipation and high lifespan thanks to the interior potting, 5G anti ~~-~~ vibration, high EMC performance, 4KVAC isolation, etc. The design observes IEC/EN60601- ~~1~~ and ANSI/AAMI ES60601- ~~1~~ version three with 2xMOPP level and ultra ~~-~~ low leakage current (<80 A). Itis very suitable for BF (patient contact) type medical device or relevant equipment. 

H@ Model Encoding MPM - 15 ~~-~~ |5| PLL Output voltage ——— Rated wattage Series name 

File Name:MPM-15-SPEC 2018-11 ~~-~~ 30 

M Pp M ~~=~~ 1 5 series 

**==> picture [341 x 41] intentionally omitted <==**

**----- Start of picture text -----**<br>
MVi! V| W V 15W High Reliable Green Medical Encapsulated Type<br>**----- End of picture text -----**<br>


**==> picture [512 x 737] intentionally omitted <==**

**----- Start of picture text -----**<br>
SPECIFICATION<br>fwoo, ma ts mru ios rus se (wr as se (um utoa e |<br>INPUT<br>prorecron<br>ENVIRONMENT<br>EMC EMISSION<br>SAFETY & Noltageficker —FENG1000- 33 mm<br>EMC<br>(Note.9)<br>Table 9, 9~28V/m( 385MHz~5.78GHz )<br>OTHERS [DIMENSION =| [524°27.2°24nm(LWH)or206"107"08] inch SSSCSC~S<br>2. No minimum load required.<br>3. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power.<br>4. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair - wire terminated with a 0 . 1 « f & 47 « f parallel capacitor.<br>5. Tolerance : includes set up tolerance, line regulation and load regulation.<br>NOTE 6. Derating may be needed under low input voltages. Please check the derating curve for more details.<br>7. Touch current was measured from primary input to DC output.<br>8. The ambient temperature derating of 3 . 5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft)<br>9. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re - confirmed that it still<br>meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies. ”<br>(as available on http:/Awww . meanwell . com)<br>SS<br>**----- End of picture text -----**<br>


File Name:MPM-15-SPEC 2018-11 ~~-~~ 30 

**==> picture [511 x 716] intentionally omitted <==**

**==> picture [511 x 716] intentionally omitted <==**