MPKSD240D5-W(037)

## **Solid State Relay Single Phase AC Output** 

Compliant 

## **Applications** 

Suitable for lighting control, motor control, vending machine control, medical device control, valve control etc, and etc. 

## **Features** 

- SCR Output 

- Control Voltage: 15V DC to 32V DC, 4V DC to 32V DC 

- Load Voltage: 240V AC, 380V AC, 480V AC 

- Load Current: 3A, 5A 

- Dielectric Strength: 4000Vrms 

## **General Specifications** 

|**General Specifications**|**General Specifications**|**General Specifications**|
|---|---|---|
|**Input Specifications(Ta=25°C)**|||
|Control Voltage Range|H|15V DC to 32V DC|
||W|4V DC to 32V DC|
|Must Turn-on Voltage|H|15V DC|
||W|4V DC|
|Must Turn-off Voltage|H|5V DC|
||W|1V DC|
|Maximum Input Current|H/W|25mA(@32V DC|



|**Output Specifications(Ta=25°C)**|**Output Specifications(Ta=25°C)**|**Output Specifications(Ta=25°C)**|
|---|---|---|
|Load Voltage Range|240V AC|24V AC to 280V AC|
||380V AC|24V AC to 440V AC|
||480V AC|24V AC to 530V AC|
|Maximum Transient Overvoltage|240V AC|600Vpk|
||380V AC|800Vpk|
||480V AC|1200Vpk|
|Load Current Range|0.1 - 5A||
|Maximum Surge Current(@10 ms)|250A||
|Maximum Turn-on Time|Random-on|1ms|
||Zero Crossing|1/2cycle+1ms|
|Maximum Turn-off Time|1/2cycle+1ms||
|Maximum Off-State Leakage Current@Rated Load Voltage|5mA||
|Maximum On-State Voltage Drop@Rated Current|1.5Vrms||
|Minimum Off-State dv/dt@Maximum Rated Voltage|500V/μs||



Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro 

05/07/23 V1.0 

Page <1> 

## **Solid State Relay Single Phase AC Output** 

|**General Specifcations(Ta=25°C)**|**General Specifcations(Ta=25°C)**|
|---|---|
|Dielectric Strength(50/60Hz)|4000Vrms|
|Minimum Insulation Resistance(@500V DC)|1000MΩ|
|Ambient Temperature Range|-30°C to +80°C|
|Storage Temperature Range|-30°C to +100°C|
|Weight(Typical)|20g|



## **Outline Dimensions / Wiring Diagram** 

**==> picture [168 x 90] intentionally omitted <==**

## **Wiring Diagram** 

**==> picture [149 x 111] intentionally omitted <==**

Dimensions : Millimetres 

Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro 

05/07/23 V1.0 

Page <2> 

## **Solid State Relay Single Phase AC Output** 

## **Thermal Derating Curve** 

**==> picture [207 x 101] intentionally omitted <==**

## **General Notes** 

1.  260°C welding temperature, the whole process should not exceed 10 seconds, 350°C, the welding process should not exceed 5 seconds, otherwise it may cause damage to the product. 

2. Control end polarity should be correct, otherwise it will damage the product. 

3. When the working environment temperature of the product is high, please refer to the temperature curve for derating. 

## **Part Number Table** 

|**Part Number Table**||
|---|---|
|**Description**|**Part Number**|
|SSR, 5A, 240V AC, 4-32V DC, Plastic cover, Zero Crossing|MP012136|
|SSR, 5A, 480V AC, 4-32V DC, Plastic cover, Zero Crossing|MP012137|
|SSR, 5A, 480V AC, 4-15V DC, Plastic cover, Zero Crossing|MP012138|
|SSR, 5A, 480V AC, 15-32V DC, Plastic cover, Zero Crossing|MP012139|
|SSR, 5A, 480V AC, 4-32V DC, Plastic cover, Random On|MP012140|



**Important Notice :** This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. 

Newark.com/multicomp-pro 

Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro 

05/07/23 V1.0 

Page <3>