MP016318

## **Fuse Holder 30A In-Line** 

## **Description** 

Quickly add circuit protection for accessory lighting, panel displays, air conditioners, and blower motors using the ATP® FHAC Series 32V Waterproof In-Line Fuse Holder. This blade fuse holder features a built-in protective cover to provide an IP67-rated waterproof and dust-tight enclosure. The standard configurations are compatible with ATP blade fuses from 1A to 20A, while the heavy-duty configurations accept ATP blade fuses up to 25A or 30A, depending on the model. Additionally, these fuse holders also support Maxi Fuse, Micro II Fuse, Mini Fuse, and Low Profile Fuse, offering comprehensive protection options for various applications. The built-in LED indicators help identify blown fuses quickly and easily, enhancing the convenience and safety of the system. 

## **Applications** 

- Accessory Lighting (Standard-Duty) 

- Panel Displays / Electronics (Standard-Duty) 

- Air Conditioners / Blower Motors (Heavy-Duty) 

## **Features** 

- Also accepts Maxi Fuse, Micro II Fuse, Mini Fuse, and Low Profile Fuse, providing versatility for different applications 

- Built-in cover protects the installed fuse from dust and water to IP67 standards 

- Heat-resistant thermoplastic fuse holder body with a UL 94 V-0 flammability rating 

- Wire leads come in 12 AWG and 6 AWG for simple in-line installation 

- Tin-plated copper alloy contacts for corrosion resistance 

- LED indicators to help identify blown fuses quickly and easily 

## **Specifications** 

Max. Current Rating : 20A, 25A, 30A Max. Current Rating Terminal : 20A Fuse Type :  ATP Fuse, Maxi Fuse, Micro II Fuse Mini Fuse, Low Profile Fuse Flammability Rating : UL 94 V-0 Ingress Rating : IP67 Mounting Method : In-line Fuse Holder Max. Voltage Rating : 32V DC Wire Size : 12 AWG, 6 AWG Electrical : 20A MAX / 32V. Insulation Body : TPV Terminal : Brass Available wire gauge : UL1015 12-24# AWG, G/6 inch Each End IP Rating : IP67 Approved 

Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro 

18/08/25 V1.0 

Page <1> 

## **Fuse Holder 30A In-Line** 

## **Diagram** 

## **Part Number Table** 

## Dimensions : Millimetres 

|**Part Number Table**||
|---|---|
|**Description**|**Part Number**|
|Fuse Holder with Cap, In-Line, LED, 30A, 12AWG|MP016318|



**Important Notice :** This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. 

Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro 

18/08/25 V1.0 

Page <2>