MP014121
Fuse, PCB Leaded, 5 A, 250 V, MP Mini 212 Series, Time Delay, Axial Leaded
- Manufacturer: MULTICOMP PRO
- Product type: PCB Fuses
- SVHC: No SVHC (25-Jun-2025)
- Fuse Current: 5A
- Product Range: MP Mini 212 Series
- Fuse Case Style: Axial Leaded
- Voltage Rating VAC: 250V
- Voltage Rating VDC: -
- Blow Characteristic: Time Delay
- Breaking Capacity Current AC: 35A
- Breaking Capacity Current DC: -
| Delivery and price | |
|---|---|
| Units per pack | 500 |
| Price | 0.154 € |
| Current stock | 1000+ |
| Lead time | 30 days |
## **PCB Fuses** ## **Description** These series time-lag fuse with low breaking capacity for use with printed circuit boards and is used in a variety of applications. This Φ2mm × 7mm device is constructed of a ceramic body with electroplated brass end caps. This series comes with 250V AC rating and 50 Ampere breaking capacity, offers excellent quality and is 100% tested for cold resistance and precise length. ## **Features** - Micro fuse with time-lag, low breaking capacity - Φ2mm × 7mm physical size - Ceramic tube, encapsulated with epoxy coating and nicked plated brass end cap - Optional axial leads are 0.6mm × 26.5mm - Protection against harmful over-currents in primary and secondary applications. - Designed compliant to UL 248-14 IEC60127-3 ## **Specifications** Operating Temperature : -55°C to 125°C Storage Conditions : +10°C to +60°C Relative humidity : ≤ 75% yearly average without dew, maximum 30 days at 95% Vibration Resistance : 120 cycles in 1 direction at 1 min. each 10-55Hz, 3 directions (X, Y, Z) in total According to MIL-STD-202 Method 201A ## **Mechanical Specifications** ## **Dimensions** Dimensions : Millimetres Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro 20/06/24 V1.0 Page <1> ## **PCB Fuses** ## **Electrical Specifications** ## **Time vs Current Characteristics Table** (measured with constant current power supply) |**Rated Current**|**100 %**|**210 %**|**300%**|**800%**| |---|---|---|---|---| |100mA~10A|>4h|1s~60s|0.2s~3s|10ms~100ms| ## **Electrical characteristics** |**Electrical characteristics**|**Electrical characteristics**|**Electrical characteristics**|**Electrical characteristics**|**Electrical characteristics**|**Electrical characteristics**| |---|---|---|---|---|---| |**Electrical Characteristics at 25°C**|||||| |**Amp Code**|**Rated**<br>**Current**|**Rated**<br>**Voltage**|**Nominal Melting**<br>**I²t (A²sec)**|**Typical Cold**<br>**Resistance**<br>**(mΩ)**|**Breaking Capacity**| |MP014117|500mA|125V AC<br>250V AC|0.44|242|50A @ 125V AC<br>50A @ 250V AC| |MP014118|1A||3.59|84.2|| |MP014119|3.15||15.4|21.5|| |MP014120|4A||30.5|17.4|35A @ 125V AC<br>35A @ 250V AC| |MP014121|5A||50.9|11.2|| Notes: (1) Permissible continuous operating current is 100% at ambient temperature of 23°C (73.4°F) (2) The cURus and cULus certification by 125V and 250V; the others certification only by 250V.. (3) The current values used for calculating I[2] T should be within the standard range of 8ms ~ 10ms. ## **Temperature Derating Curve** Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro 20/06/24 V1.0 Page <2> ## **PCB Fuses** ## **Average Time Current (I-T) Curves** ## **Soldering Parameters** 260°C.≤5 sec (Wave Soldering) 350°C.≤3 sec (Hand Soldering) Soldering Peak: 260°C - 10 sec (IEC 60068-20) ## **Part Number Table** |**Part Number Table**|| |---|---| |**Description**|**Part Number**| |Time lagMicro fuse, 500mA/250V, 2mm × 7mm|MP014117| |Time lagMicro fuse, 1A/250V, 2mm × 7mm|MP014118| |Time lagMicro fuse, 3.15A/250V, 2mm × 7mm|MP014119| |Time lagMicro fuse, 4A/250V, 2mm × 7mm|MP014120| |Time lagMicro fuse, 5A/250V, 2mm × 7mm|MP014121| **Important Notice :** This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro 20/06/24 V1.0 Page <3>
Updated at April 29, 2026
Multicomp Pro is a trusted manufacturer of high-quality electronic components, built upon the rich heritage of established industry names such as SPC Technology, Tenma, Duratool, and Pro Power. Developed to provide engineers and procurement professionals with exceptional value, the brand offers an extensive portfolio of rigorously lab-tested products. By combining strict quality assurance with cost-effective manufacturing, Multicomp Pro delivers premium reliability while providing significant savings compared to leading industry alternatives. The brand's comprehensive lineup is anchored by a vast selection of passive components and essential circuit protection devices. Engineers consistently rely on Multicomp Pro for aluminum electrolytic capacitors, film capacitors, and power inductors designed for demanding applications. The protection portfolio is equally robust, featuring hundreds of standard fuses, resettable fuses, and transient voltage suppression (TVS) diodes to safeguard critical circuitry. Furthermore, the company is a major provider of precision timing solutions, including a wide array of reliable crystals and standard oscillators. Beyond passives and board-level protection, Multicomp Pro offers extensive solutions in power management, discrete semiconductors, and connectivity. This includes highly efficient AC/DC converters, bridge rectifiers, bipolar transistors, and a versatile selection of wire-to-board terminal blocks. Backed by comprehensive factory audits, continuous laboratory testing, and a strong commitment to ethical sourcing, Multicomp Pro ensures that every component consistently meets stringent international safety and performance standards.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 540,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →