MP007745
LED Driver, IP20, LED Lighting, 75 W, 24 VDC, 3.12 A, Constant Voltage, 200 V
- Manufacturer: MULTICOMP PRO
- Product type: AC / DC LED Power Supplies
- SVHC: To Be Advised
- Product Range: MP-ELED DALI
- Output Current: 3.12A
- LED Driver Mode: Constant Voltage
- Output Power Max: 75W
- Input Voltage Max: 240V
- Input Voltage Min: 200V
- Output Voltage Max: 24VDC
- Power Supply Applications: LED Lighting
| Delivery and price | |
|---|---|
| Units per pack | 10 |
| Price | 44.7 € |
| Current stock | 10+ |
| Lead time | 30 days |
## **75W DALI & Push Dimmable LED Drivers** ## **Features** - Constant voltage/ PWM Output - DALI & Push dimming function - AC input: 100V AC to 265V AC - Built-in active PFC function - Efficiency up to 87% - Protections: Short circuit/ Over load/ Over temperature - Cooling by free air convection - IP20 design for indoor installation. - Suitable for intelligent LED lighting |**Models**|**MP007744**|**MP007745**| |---|---|---| |**Output Specifications**||| |Output Voltage|12V|24V| |Voltage Tolerance|±0.5V|| |Output Current|6.25A|3.12A| |Rated Power|75W|| |Load Regulation|± 2%|| |**Input Specifications**||| |Input Voltage|200V AC to 240V AC|| |FrequencyRange|47Hz to 63Hz|| |Inrush Current|56A(Twidth=260μs 230V AC)|| |Full Load Efficiency (Typ.)|87%|86%| |AC Current(Max.)|0.55A|| |Leakage Current|<0.5mA|| |Power Factor|PF>0.95/230V AC(Full Loading)|| |**Protection**||| |Short Circuit|Constant current mode, recovers automaticallyafter fault condition is removed|| |Over Loading|≤120% constant current limiting, recovers automaticallyafter fault condition is removed|| |Over Temperature|100°C± 10°C|| |Protection Class|II|| |**Environment**||| |WorkingTemperature|-40 to +60°C(Refer to deratingcurve)|| |WorkingHumidity|20% to 95% RH, non-condensing|| |Storage Temperature, Humidity|-40°C to +80°C, 10% RH to 95% RH|| |Temperature Coefficient|±0.03%/°C(0°C to 50°C)|| |Vibration|10-500Hz, 5G 10min./ 1 cycle,period for 60min.each alongX, Y, Z axes|| |**Safety & EMC**||| |SafetyStandards|EN61347-1, EN61347-2-13, EN62493, IP20|| |Withstand Voltage|I/P-O/P:3.75KV AC|| |Isolation Resistance|I/P-O/P:100MΩ/500VDC/25°C/70%RH|| Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro 22/09/21 V1.0 Page <1> ## **75W DALI & Push Dimmable LED Drivers** |**Dimmable LED Drivers**|**Dimmable LED Drivers**|multicomp<br>ro| |---|---|---| |**Models**|**MP007744**|**MP007745**| |EMC Emission|Compliance to EN55015, EN61000-3-2, EN61000-3-3(≥60% load)|| |EMC Immunity|Compliance to EN61000-4-2,3,4,5,6,11, EN61547|| |**Other Specifications**||| |Weight|0.48Kg|| |Size|180mm × 60mm × 35mm|| |Packing|355mm × 215mm × 215mm(20PCS/CTN, 11 Kg/CTN))|| ## **Mechanical Specification** **==> picture [98 x 8] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions : Millimetres<br>**----- End of picture text -----**<br> Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Page <2> 22/09/21 V1.0 ## **75W DALI & Push Dimmable LED Drivers** ## **Derating Curve** ## **Dimming Operation** Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro 22/09/21 V1.0 Page <3> ## **75W DALI & Push Dimmable LED Drivers** ## **Dimming Operation** ## **Part Number Table** |**Part Number Table**|| |---|---| |**Description**|**Part Number**| |DALI & Push Dimmable LED Driver, 75W, 12V, IP20|MP007744| |DALI & Push Dimmable LED Driver, 75W, 24V, IP20|MP007745| **Important Notice :** This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of Premier Farnell Limited 2019. Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro 22/09/21 V1.0 Page <4>
Updated at April 28, 2026
Multicomp Pro is a trusted manufacturer of high-quality electronic components, built upon the rich heritage of established industry names such as SPC Technology, Tenma, Duratool, and Pro Power. Developed to provide engineers and procurement professionals with exceptional value, the brand offers an extensive portfolio of rigorously lab-tested products. By combining strict quality assurance with cost-effective manufacturing, Multicomp Pro delivers premium reliability while providing significant savings compared to leading industry alternatives. The brand's comprehensive lineup is anchored by a vast selection of passive components and essential circuit protection devices. Engineers consistently rely on Multicomp Pro for aluminum electrolytic capacitors, film capacitors, and power inductors designed for demanding applications. The protection portfolio is equally robust, featuring hundreds of standard fuses, resettable fuses, and transient voltage suppression (TVS) diodes to safeguard critical circuitry. Furthermore, the company is a major provider of precision timing solutions, including a wide array of reliable crystals and standard oscillators. Beyond passives and board-level protection, Multicomp Pro offers extensive solutions in power management, discrete semiconductors, and connectivity. This includes highly efficient AC/DC converters, bridge rectifiers, bipolar transistors, and a versatile selection of wire-to-board terminal blocks. Backed by comprehensive factory audits, continuous laboratory testing, and a strong commitment to ethical sourcing, Multicomp Pro ensures that every component consistently meets stringent international safety and performance standards.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 540,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →