MOJODIN-12V

## Input: 110-230Vac Output: 12Vdc 80mA 

## MOJO-12V 

19 x 22 x 71mm tabs Removed (Tabs are 10mm each) 

## MOJO-12VDIN DIN Rail Version 

**==> picture [80 x 26] intentionally omitted <==**

**----- Start of picture text -----**<br>
Break-off<br>Mounting Tabs<br>**----- End of picture text -----**<br>


- Max 1W Output 

- Screwless Terminal Connections 

- Compact or DIN Rail mount 

- Operates over –30 to 80[o ] Celsius 

- Short Circuit Protection 

- Overload Protection 

- Overvoltage Protection 

- No Load Consumption <0.075W 

## Intended Use 

- RF Solutions Transmitters and Receivers 

- For Professional Use only 

## Description 

Quick to deploy this “plug and Play” PSU is 110-230Vac input with 12Vdc output upto 83mA. The PSU has Overload protection, overvoltage protection, Modules are available as stand-alone with break off mounting tabs or DIN Rail mounting. 

Please note this product is for Professional Use Only. 

DS-MOJO-PSU-1 

## MOJO 12Vdc Power Supply 

## Connections 

Input 110-230Vac 

**==> picture [43 x 45] intentionally omitted <==**

**----- Start of picture text -----**<br>
Output<br>+12V<br>GND<br>**----- End of picture text -----**<br>


## Technical specifications 

Operating Temperature –30 to +80[o] C 

|Technical specifications<br>Operating Temperature –30 to +80[o]C|||||
|---|---|---|---|---|
|Electrical Characteristics|Min<br>~~ee~~|Typical<br>~~es ee~~|Max<br>~~es ee~~|Dimension|
|Supply Voltage<br>~~es~~|110<br>~~es~~<br>~~ee~~<br>~~ee~~|~~es~~<br>~~es ee~~<br>~~ee~~|240<br>~~es~~<br>~~es ee~~|Vac<br>~~es~~|
|Supply Current @240Vac<br>~~es~~|~~ee~~<br>~~es~~<br>~~ee~~<br>~~es~~|18<br>~~es ee~~<br>~~es~~<br>~~ee~~<br>~~ee~~|~~es ee~~<br>~~es~~|mA<br>~~es~~|
|Output Current<br>~~ee~~|~~ee ~~<br>~~ee~~<br>~~es~~<br>~~en es~~|~~ee~~<br>~~ee~~<br>~~ee~~<br>~~es~~|83<br>~~ee~~<br>~~es~~|mA<br>~~ee~~|
|Rated Power<br>~~es~~|~~es~~<br>~~es~~<br>~~en es~~<br>~~ee~~|~~ee~~<br>~~es~~<br>~~es~~<br>~~es~~|1<br>~~es~~<br>~~es~~<br>~~es~~|W<br>~~es~~|
|Ripple & Noise<br>~~es~~|~~en es~~<br>~~es~~<br>~~ee~~<br>~~es~~|~~es ~~<br>~~es~~<br>~~es~~<br>~~es~~|150<br> ~~es~~<br>~~es~~<br>~~es~~|mVp-p<br>~~es~~|
|Voltage Tolerance<br>~~ee~~|~~ee ~~<br>~~ee~~<br>~~es~~|~~es ~~<br>~~ee~~<br>~~es~~|+/-2.5<br> ~~es~~<br>~~ee~~|%<br>~~ee~~|
|Load Regulation|~~es~~<br>~~ee ee~~|~~es~~<br>~~ee~~|+/-0.5<br>~~ee~~|%|
|Overload Protection (enters Hiccup Mode,<br>Self recovers when fault removed)<br>~~ee~~|~~ee~~<br>~~ee ee~~<br>~~Geers es~~|~110<br>~~ee~~<br>~~ee~~<br>~~es~~|~~ee~~<br>~~ee~~|% output power<br>~~ee~~|
|Overvoltage Protection (Zener Diode Clamp)<br>~~ee~~|~~ee ee~~<br>~~ee~~<br>~~Geers es~~|12.6~16.2<br>~~ee ~~<br>~~ee~~<br>~~es~~|~~ee~~<br>~~ee~~|V<br>~~ee~~|



## Safety Warning using 110 - 230Vac Version 

- Installation Failure to follow the instructions may result in risk of injury to persons or property. 

- Personnel installing and maintaining  this equipment must be qualified Electricians with appropriate knowledge and experience who can identify and prevent Electrical hazards. 

- Product is not independently isolated, ISOLATE the mains electricity supply before connecting  and observe any relevant safety precautions. Product must be connected to a switch fused (spur/supply) or BS 1363 Plug. 

- When Used to switch mains voltage Loads ensure the circuitry is suitable protected to prevent electric shock. 

RF Solutions Ltd. Recycling Notice Waste Batteries and Accumulators Meets the following EC Directives: Directive 2006/66/EC DO NOT Where batteries are fitted, before recycling Discard with normal waste, please recycle. 4 the product, the batteries must be ROHS Directive 2011/65/EU and amendment 2015/863/EU removed and disposed of at a licensed Specifies certain limits for hazardous substances. collection point. WEEE Directive 2012/19/EU RF Solutions battery producer number: Waste electrical & electronic equipment. This product must be disposed of through a licensed BPRN00060. WEEE collection point. RF Solutions Ltd., fulfils its WEEE obligations by membership of an approved compliance scheme. Environment agency registration number: WEE/JB0104WV. 

## Disclaimer: 

Whilst the information in this document is believed to be correct at the time of issue, RF Solutions Ltd does not accept any liability whatsoever for its accuracy, adequacy or completeness. No express or implied warranty or representation is given relating to the information contained in this document. RF Solutions Ltd reserves the right to make changes and improvements to the product(s) described herein without notice.  Buyers and other users should determine for themselves the suitability of any such information or products for their own particular requirements or specification(s).  RF Solutions Ltd shall not be liable for any loss or damage caused as a result of user’s own determination of how to deploy or use RF Solutions Ltd’s products.  Use of RF Solutions Ltd products or components in life support and/or safety applications is not authorised except with express written approval. No licences are created, implicitly or otherwise, under any of RF Solutions Ltd’s intellectual property rights. Liability for loss or damage resulting or caused by reliance on the information contained herein or from the use of the product (including liability resulting from negligence or where RF Solutions Ltd was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict RF Solutions Ltd’s liability for death or personal injury resulting from its negligence. 

wi Amanda vee ian Wy Swans vi es sare