MOFR-M12-2

## **Photoelectric sensors** Through-beam for Separate Amplifier **MOFT, MOFR** 

- Built-in lens: 2°, 5° or 8° 

- Rated operating distance: 20 m or 50 m 

- Modulated infrared light 

- High immunity to ambient light 

- For amplifier series S142... and PAM03... 

- Degree of protection IP 66/IP 67 

- For harsh environment 

- High penetration power 

- 15 m shielded PVC cable 

- Ø 10 mm polycarbonate housing or M12 or M14 stainless steel housing 

## **Description** 

Small through beam photoelectric sensors. Rated operating distanc up to 50 m. 3 beam angles. Waterproof, for dirty environment, i.e. water, dust, steam etc. 

To be used with amplifiers series S142... and PAM03... 15 m shielded cable, PVC. Ø 10 x 42 mm polycarbonate or M12 or M14 stainless steel housing. Straight optical axis. 

## **Part selection key** 

|**MOF**|**-**<br>Photoelectric sensor|
|---|---|
|**X**|**T**<br>Emitter<br>**R**<br>Receiver|
|**X**|**20**<br>Rated operatingdistance: 20 m<br>**50**<br>Rated operatingdistance: 50 m|
||**-**<br>Housingdiameter: Ø10|
|**X**|**M12**<br>Housingdiameter: M12|
||**M14**<br>Housingdiameter: M14|
||**-/2**<br>Optical angle: 2°|
|**X**|**5**<br>Optical angle: 5°|
||**8**<br>Optical angle: 8°|
|**PAM03**|**-**<br>For the PAM03... amplifier|



## **Part selection** 

|**Housing diameter**<br>~~ee~~|**Rated operating distance (Sn)**<br>~~ry~~|**Optical angle**<br>~~Ptr~~<br>~~ns~~|**Part number (Emitter)**<br>~~I~~|**Part number (Receiver)**|
|---|---|---|---|---|
|Ø 10 mm<br>~~ee~~|20 m<br>~~ry ~~<br>~~te~~|2°<br> ~~Ptr ~~<br>~~te~~<br>~~ns~~<br>~~Gs~~|**MOFT 20**<br> ~~I~~<br>~~te~~<br>~~Sn~~|**MOFR**<br>~~te~~|
||20 m<br>~~ts~~|5°<br>~~ns~~<br>~~ts~~<br>~~Gs~~<br>~~rn~~|**MOFT 20-5**<br>~~ts~~<br>~~Sn~~|**MOFR-5**<br>~~ts~~|
||20 m<br>~~nt~~|8°<br>~~Gs~~<br>~~nt~~<br>~~rn~~<br>~~Rs~~|**MOFT 20-8 ***<br>~~Sn~~<br>~~nt~~|**MOFR-8**<br>~~nt~~|
||20 m<br>~~re~~|8°<br>~~rn~~<br>~~re~~<br>~~Rs~~|**MOFT 20-8-PAM03**<br>~~re~~|**MOFR-8**<br>~~re~~|
||50 m<br>~~Rs~~|2°<br>~~Rs~~<br>~~Rs~~|**MOFT 50**<br>~~Rs~~<br>~~Sn~~|**MOFR**<br>~~Rs~~|
|M12<br>~~ee~~|20 m<br>~~Ry~~|2°<br>~~Ry~~<br>~~es~~|**MOFT 20-M12-2**<br>~~Ry~~<br>~~Sn~~|**MOFR-M12-2**<br>~~Ry~~|
||20 m<br>~~re~~<br>~~a~~|5°<br>~~re~~<br>~~es~~|**MOFT 20-M12-5**<br>~~Sn~~<br>~~re~~<br>~~tn~~|**MOFR-M12-5**<br>~~re~~|
||20 m<br>~~re~~<br>~~es~~<br>~~a~~<br>~~a~~|8°<br>~~re~~<br>~~es~~<br>~~es~~<br>~~rs~~|**MOFT 20-M12-8 ***<br>~~re~~<br>~~es~~<br>~~tn~~|**MOFR-M12-8**<br>~~re~~<br>~~es~~|
||20 m<br>~~a~~<br>~~a~~<br>|8°<br>~~rs~~<br>~~e~~~~**s**~~<br>|**MOFT 20-M12-8-PAM03**<br>~~tn~~<br>~~ee~~<br>|**MOFR-M12-8**<br>|
||50 m<br>~~a~~<br>|2°<br>~~rs~~<br>~~e~~~~**s**~~<br>|**MOFT 50**<br>~~ee~~<br>|**MOFR-M12-2**<br>|
|M14<br>~~ee~~|20 m<br>~~a~~<br>|8°<br>~~rs~~<br>~~e~~~~**s**~~<br><br>~~r~~|**MOFT 20-M14-8 ***<br>~~ee~~<br><br>~~nn~~|**MOFR-M14-8**<br>|
||20 m<br>~~ee~~|8°<br>~~e~~~~**s**~~<br>~~ee~~<br>~~r~~|**MOFT 20-M14-8-PAM03**<br>~~ee~~<br>~~ee~~<br>~~nn~~|**MOFR-M14-8**<br>~~ee~~|



**1** 

MOFT, MOFR 

## **Features** 

**Main operational data Emitter Functional principle** Photoelectric emitter **Sensing** 20 m Rated operating distance (Sn) 50 m **Optical information** Light source GaAIAs LED, 880 nm Light type Infrared, modulated Optical angle ± 2 ° , ± 5 ° , ± 8 ° ~~_[==]~~ **Main operational data Receiver** 

**Functional principle Sensingg** Sensitivity adjy adj adjjustment Operating freqperating freqerating freqg freq freqquency Response time (tponse time (tonse time (t(ttOFF and tON) **Optical information** Optical angleglele ~~_~~ **Electrical data** 

**Functional principle** Photoelectric receiver **Sensingg** Sensitivity adjy adj adjjustment Adjustable on amplifier Operating freqperating freqerating freqg freq freqquency (f) See amplifier data Response time (tponse time (tonse time (t(ttOFF and tON) See amplifier data **Optical information** Optical angleglele ± 2 ° , ± 5 ° , ± 8 ° 

## **Electrical data** 

**Power supply** Rated operational voltage (Ue) Supplied by amplifier Power-ON delay (tv) See amplifier data 

## **Environmental data** 

**==> picture [528 x 209] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||
|---|---|---|
|Ambient temperatures|
|Operating|-20°…+60°C (-4°…+140°F)*|
|Storage|-40°…+80°C (-40°…+176°F)*|
|10,000 lux (sensitivity ± 5%)|
|Ambient light|
|Note:|The actual range will be within ±5% of the set ran ge at an ambient light of 10,000 lux|
|Mechanical influences|
|Vibration|10…150 Hz, 0.5 mm/7.5 g|(EN IEC 60068-2-6)|
|Drop test|2 x 1 m and 100 x 0.5 m (EN IEC 60068-2-31)|
|Categorization|
|Pollution degree|3 (EN IEC 60664, 60664A; EN IEC 60947-1)|
|Overvoltage category|III (EN IEC 60664; EN IEC 60947-1)|
|Degree of protection|IP66/IP67 (EN IEC 60539; EN IEC 60947-1)|
|Safety (electrical)|
|Protections|Short circuits, reverse polarity|
|Dielectric insulation voltage|500 VAC (rms)|

**----- End of picture text -----**<br>


**2** 

Carlo Gavazzi Industri A/S. COPYRIGHT ©2025. Content subject to change without notice (04.04.2025) 

MOFT, MOFR 

## **Structure** 

## **Housing** 

**==> picture [406 x 218] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|Housing|
|Housing|Cylindrical|
|Ø10: Polycarbonate, black|
|Body|
|M12 or M14: Stainless steel|
|Dimensions|
|Optical angle 2|°|Ø10 x 42 mm|
|Optical angle 5|°|M12 x 42 mm|
|Ø10 x 39.5 mm|
|Optical angle 8|°|M12 x 39.5 mm|
|M14 x 39.5 mm|
|Weight|
|Emitter|347 g|(Cable incl.)|
|Receiver|347 g|(Cable incl.)|
|Connection cable|
|Emitter|Grey, 15 m oilproof PVC, Ø 4 mm, 1 x 0.25 mm|[2]|, shielded|
|Receiver|Black, 15 m oilproof PVC, Ø 4 mm, 1 x 0.25 mm|[2]|, shielded|

**----- End of picture text -----**<br>


## **Wiring** 

**==> picture [230 x 147] intentionally omitted <==**

**----- Start of picture text -----**<br>
Emitter Receiver<br>(grey cable) (black cable)<br>bet<br>Output NPN<br>Alarm output NPN<br>Power<br>supply<br>(+) (-)<br>S142...<br>**----- End of picture text -----**<br>


**==> picture [205 x 47] intentionally omitted <==**

**----- Start of picture text -----**<br>
Receiver 1 Receiver 2 Receiver 3 OUT 1 OUT 2 OUT 3 OUT 4<br>A1 12 14 22 24 32 34 42 44<br>DI 1<br>CH1 CH2 CH3 WARN.<br>A2 11 21 31 41 DI 2<br>Transmitter 1 Transmitter 2 Transmitter 3<br>R1 CR1 R2 CR2 R3 CR3<br>T1 CT1 T2 CT2 T3 CT3<br>**----- End of picture text -----**<br>


**PAM03...** 

**3** 

Carlo Gavazzi Industri A/S. COPYRIGHT ©2025. Content subject to change without notice (04.04.2025) 

MOFT, MOFR 

## **Dimensions in mm** 

## **2° and 5° types** 

**8° types** 

## **LED indication** 

- ~~LT~~ **Indications** On amplifier 

## **Installation** 

## **Mounting** 

1. When installing the sensors, make sure that the maximum range is not exceeded and - if two separate systems are mounted close 

   - to each other - place the sensors so cross-talk is avoided, or use PAM03... 

2. To protect the receiver and the transmitter from damage, proper fittings must be used in the installation. 

3. Connect the receiver and the emitter to the dedicated terminals on the S142... or PAM03... system. 

**4** 

Carlo Gavazzi Industri A/S. COPYRIGHT ©2025. Content subject to change without notice (04.04.2025) 

MOFT, MOFR 

## **Delivery contents and accessories** 

## **Delivery contents** 

- MOFT... and MOFR... 

- All M12-types: 2 pcs. M12 nuts 

- All M14-types: 2 pcs. M14 nuts 

- Packaging: Plastic bag, emitter and receiver packed separately 

## **Accessories** 

- Mounting bracket MB-M01 

## **Further informations** 

**Carlo Gavazzi website** www.gavazziautomation.com 

**5** 

Carlo Gavazzi Industri A/S. COPYRIGHT ©2025. Content subject to change without notice (04.04.2025)