MGRM-WB1-3C-BLK-120

US Office: Tel: 800.648.2800 or +1.847.671.6690 UK Office: Tel: (+44) 1543 459 555 www.mobilemark.com a n t e n n a  s o l u t i o ns 

## RM-WB1 RM-WB1-DN MGRM-WB1 —_ 

MGRM Mag-mount 

## 5G SUB-6 RUGGED SURFACE MOUNT 600-6000 MHZ SERIES 

- Covers all Cellular & 5G LTE Frequencies worldwide, from 617 MHz - 6000 MHz 

- Rugged and attractive ASA radome, available in thruhole or mag-mount 

- CBRS (Citizen Band Radio Service) at 3.55-3.7 GHz and Band 71 at 617-698 MHz 

RM Series - DN RM Series 

## RM-WB1 SERIES SPECIFICATIONS 

## PRODUCT OVERVIEW 

Mobile Mark’s RM-WB1 Wideband antenna covers the entire 5G Sub-6 frequency band from 600-6000 MHz. The “6-2-6” antenna solutions make it possible to connect to any of the current or planned cellular frequency bands that reside at or below 6 GHz. 

This antenna contains a single element covering Part Number RM-WB1 MGRM-WB1 617-960 & 1710-6000 MHz. This includes the new Frequency 617-960/1700-6000 MHz 617-960/1700-6000 MHz Band 71 at 617-698 MHz, CBRS at 3550-3700 MHz Gain 3 dBi peak 3 dBi peak and LAA at 5-6 GHz. The RM-WB1 can also be VSWR 2:1 2:1 used for NB-IoT and LTE-M applications where the specific frequency band may vary from project to Radome ABS Plastic ABS Plastic project. Max Power 10 Watts 10 Watts ~~=~~ Impedance 50 Ohm 50 Ohm The antenna measures 3.1” (79cm) tall by 1.7” (43cm) in diameter. It provides 3 dBi gain and Dimensions 1.75” diameter x 3” high 1.7” diameter x 3 5/8” high can handle up to 10 watts of power. The RM-WB1 (45 mm x 76 mm) (43 mm x 92 mm) can be used for fixed site installation or for mobile Mag base dia. 2 5/8” (67mm) installations. Mounting 5/8” Dia. (15.8mm) feed thru Magnet Mount (standard) 1” lg (25.4mm) thread up to The RM mounts to a 5/8” (16mm) diameter hole 1/4” (6.35cm) thk. metal and is available with either a cable pigtail termiDN Option: Direct Connect nation or a Direct “N” connector termination. The Operating Temp -40 degrees to +85 degrees C -40 degrees to +85 degrees C same electrical and mechanical specs apply to Cable RF-195 RF-195 both configurations. Connector Standard Option: SMA Plug DN Option: Direct “N” Jack The antenna is also available as a mag-mount Color Options Black or White Black or White 

The antenna measures 3.1” (79cm) tall by 1.7” (43cm) in diameter. It provides 3 dBi gain and can handle up to 10 watts of power. The RM-WB1 can be used for fixed site installation or for mobile installations. 

The RM mounts to a 5/8” (16mm) diameter hole and is available with either a cable pigtail termination or a Direct “N” connector termination. The same electrical and mechanical specs apply to both configurations. 

The antenna is also available as a mag-mount with the model number MGRM-WB1. 

21