MGD-2400/5500-3C-BLK-120

US Office: Tel: 800.648.2800 or +1.847.671.6690 UK Office: Tel: (+44) 1543 459 555 MobileMark > www.mobilemark.com a n t e n n a  s o l u t i o n s 

## **Magnet Mount Antennas WiFi, 2.4 & 2.4/4.9-6 GHz** 

- Single band for 2.4 GHz, dual band models for 2.4-2.5 & 4.9 - 6 GHz 

- Built-in ground plane improves high frequency performance 

**==> picture [187 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
IMAG5  MGD Series 2.4 &<br>4.9-6 GHz<br>**----- End of picture text -----**<br>


Mobile Mark’s high frequency Magnet Mount antennas are useful for many applications including surveillance work, 2.4 WiFi/ISM, and other high frequency applications.  Their unique design features allow them to overcome many of the problems normally associated with higher frequency systems. 

The IMAG Series mag-mounts have a ground plane at the feedpoint. This design overcomes the typical ground decoupling that occurs at the higher frequencies. 

Because the IMAG antennas have their own built-in ground plane but will require a metal surface to be mounted.  Available in either a unity gain (0 dBi) or 5 dBi. 

The IMAG Series are very small in design and appearance.  A powerful mini magnet holds the antenna securely at all times. The 3” round  (76 mm) integral ground plane on the IMAG5 can serve as a removal handle. 

The low profile 5 dBi whip with tight winding phasing coil reduces potential whistling noise. 

- Low profile, powerful magnet securely holds antenna 

and can also be used for public safety 4.9 GHz and DSRC 5.9. It is typically supplied with an SMA plug connector, others are available. 

A steel surface (but not stainless steel) will provide best contact with the powerful magnet. All units are supplied with a choice of RF connectors. 

Standard cable supplied is low loss-195, which has excellent electrical characteristics. 

## **Model #         Gain    Frequency** 

MGD-2400/5500-3C-BLK-120   2.5 dBi   2.4-2.5 & 4.9-6 GHz MGD-2400/5500-3C-WHT-120  2.5 dBi 2.4-2.5 & 4.9-6 GHz 

IMAG5-2400-3C-BLK-120   5 dBi     2400-2485 MHz 

Available in WHT-White or BLK-Black 

The MGD-2400/5500 antenna operates on WiFi 2.4 & 5 GHz 

**Specifications** Frequency:          See above Gain:             See above VSWR:                 2:1 over band Impedance:           50 Ohm nominal Maximum Power:        10 Watts Operating Temp:        -40[o] to +85[o] C Antenna Height: IMAG5 series        4 7/8 inches (124 mm) MGD Size:                  1.9” High x 3.4” Diameter (48 mm x 86 mm) IMAG Mount:         ASA plastic & metal 

MGD Radome:            White or black ASA plastic IMAG Whip:          302 stainless steel Cable:             10 feet (3 meters) of LL-195 Connector:          SMA Plug (Male) standard Shock & Vibration: MGD series, EN 61373, IEEE 1478, MIL-810G TIA-329.2-C 

Specifications subject to change without notice (03/2017) 

Made in the USA 

83