Image not available
Illustrative purposes only
MEA1608PE270TA0G
Power Line Filter, 6.3 V, 100 mA
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: TDK
- Product type:
- Capacitance:27pF; Voltage Rating:6.3V; Filter Type:General Purpose; Current Rating:100mA; Filter Terminals:SMD; Inductance Min:-; Leakage Current Max:-; Product Range:-; SVHC:No SVHC (15-Ja
- SVHC: No SVHC (04-Feb-2026)
- Capacitance: 27pF
- Filter Type: General Purpose
- Product Range: MEA-PE Series
- Current Rating: 100mA
- Voltage Rating: 6.3V
- Filter Terminals: SMD
| Delivery and price | |
|---|---|
| Units per pack | 4000 |
| Price | 0.356 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
October 2013 ## 3-terminal Filters, SMD Array For signal line (UHF band terrestrial digital broadcast / DVB-H band compatible) MEA-PE series **MEA1210PE 1210[0504 inch]* MEA1608PE 1608[0603 inch] MEA2010PE 2010[0804 inch]** ***** Dimensions Code JIS[EIA] (2/11) ## **REMINDERS FOR USING THESE PRODUCTS** Before using these products, be sure to request the delivery specifications. ## **SAFETY REMINDERS** Please pay sufficient attention to the warnings for safe designing when using these products. ## **REMINDERS** - ~~O~~ The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. ~~O~~ Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). - ~~O~~ Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. - ~~O~~ Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. - ~~O~~ When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. - O Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. - ~~O~~ Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. ~~O~~ Use a wrist band to discharge static electricity in your body through the grounding wire. ~~O~~ Do not expose the products to magnets or magnetic fields. ~~O~~ Do not use for a purpose outside of the contents regulated in the delivery specifications. - ~~O~~ The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. - The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. - (1) Aerospace/Aviation equipment (8) Public information-processing equipment - (2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment (3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. 001-01 / 20131004 / e9621_mea_signal_03.fm (3/11) **Product compatible with RoHS directive Halogen-free Compatible with lead-free solders** ## **3-terminal Filters, SMD Array** **For signal line (UHF band terrestrial digital broadcast / DVB-H band compatible)** ## **Overview of the MEA-PE Series** ## **FEATURES** Single chip for 2-line or 4-line filters, and compatible with high-density mounting. Compact with a low profile design. Effective as a desensitization countermeasure in information transmission terminals such as smart phones. Can be used for signal lines of mobile device displays. ## ~~|~~ **APPLICATION** Noise removal from signal lines of smart phones, digital cameras, PCs, game machines, flat TVs, etc. |**PART NUMBER CONSTRUCTION**<br>MEA<br>1210<br>**Series name**<br>**L×W×T Dimensions**<br>**(mm)**<br>~~|~~<br>~~1~~<br>~~1~~|**PART NUMBER CONSTRUCTION**<br>MEA<br>1210<br>**Series name**<br>**L×W×T Dimensions**<br>**(mm)**<br>~~|~~<br>~~1~~<br>~~1~~|PE<br>**Product internal**<br>**code**<br>~~1 ~~|PE<br>**Product internal**<br>**code**<br>~~1 ~~|PE<br>**Product internal**<br>**code**<br>~~1 ~~|220<br>T<br>□□□<br>**Capacitance**<br>**Packaging style**<br>**Internal code**<br>**(pF)**<br> ~~___—1____1___—~~|220<br>T<br>□□□<br>**Capacitance**<br>**Packaging style**<br>**Internal code**<br>**(pF)**<br> ~~___—1____1___—~~| |---|---|---|---|---|---|---| |1210<br>1.2×1.0×0.5<br>1608<br>1.6×0.8×0.5<br>2010<br>2.0×1.0×0.7<br>~~—~~||PE|||220<br>22<br>T<br>Taping<br>360<br>36|| ## **OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT** |**Type**|**Temperature range**|**Temperature range**|**Package quantity**|**Individual weight**| |---|---|---|---|---| ||**Operating**<br>**temperature**|**Storage**<br>**temperature**||| ||（**°C**）|（**°C**）|（**pieces/reel**）|（**mg**）| |**MEA1210PE**|–40 to +85|–40 to +85|4,000|3| |**MEA1608PE**|–40 to +85|–40 to +85|4,000|3.5| |**MEA2010PE**|–40 to +85|–40 to +85|4,000|7| The Storage temperature range is for after the circuit board is mounted. RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm. • All specifications are subject to change without notice. 001-01 / 20131004 / e9621_mea_signal_03.fm (4/11) ## **Overview of the MEA-PE Series** ## **RECOMMENDED REFLOW PROFILE** ||||Preheating|Preheating||Soldering<br>T4<br>Peak|Soldering<br>T4<br>Peak|Soldering<br>T4<br>Peak|Soldering<br>T4<br>Peak|Natural<br>cooling||| |---|---|---|---|---|---|---|---|---|---|---|---|---| |T:Temperature|T1|||T2|T3||t3|||T3||| |||||t1|||t2|||||| |||||||||||||| |||||t:Time||||||||| |**Preheating**|||||**Soldering**||||||**Peak**|| |**Temp.**|||**Time**||**Temp.**|||**Time**|||**Temp.**|**Time**| |**T1**|**T2**||**t1**||**T3**|||**t2**|||**T4**|**t3**| |150°C<br>180°C|||60 to 120s|60 to 120s|230°C||30 to 60s||||250 to 260°C|10s max.| • All specifications are subject to change without notice. 001-01 / 20131004 / e9621_mea_signal_03.fm (5/11) **==> picture [516 x 602] intentionally omitted <==** **----- Start of picture text -----**<br> E M C C o m p o n e n t s<br>ee<br>MEA-PE series<br>MEA1210PE Type<br>SHAPE & DIMENSIONS<br>1.2±0.15<br>GND GND<br>--<br>CH1 CH2<br>0.1min.<br>0.65±0.05<br>Wim<br>& 0.35±0.1 0.15min. Dimensions in mm<br>RECOMMENDED LAND PATTERN CIRCUIT DIAGRAM<br>0.65<br>0.3 GND<br>GND<br>CH1 CH2<br>i<br>| L d<br>0.9<br>1.8 Dimensions in mm<br>i?<br>0.1<br>± 0.15<br>0.25 1.0±<br>0.1min.<br>0.1<br>±<br>0.5<br>0.5<br>0.6 0.25<br>**----- End of picture text -----**<br> • All specifications are subject to change without notice. 001-01 / 20131004 / e9621_mea_signal_03.fm (6/11) **E M C C o m p o n e n t s** _SSSSS—‘—__ ## MEA-PE series **MEA1210PE Type** ## **ELECTRICAL CHARACTERISTICS** ## **CHARACTERISTICS SPECIFICATION TABLE** |**Capacitance**<br>**(pF)**|**Cutoff frequency**<br>**(MHz)typ.**|**Insertion loss 20dB**<br>**frequency range**<br>**(MHz)**|**Rated voltage**<br>**(V)max.**|**Rated current**<br>**(mA)max.**|**Part No.**| |---|---|---|---|---|---| |40|210|470 to 3000|6.3|100|MEA1210PE400T□□□| |36|220|470 to 3000|6.3|100|MEA1210PE360T□□□| |22|250|470 to 3000|6.3|100|MEA1210PE220T□□□| |○Measurement equipment||| |---|---|---| |Measurement item|Product No.|Manufacturer| |Capacitance|4294A|Agilent Technologies| |Frequencycharacteristics|N5230C|Agilent Technologies| |＊Equivalent measurement equipment may be used.|Equivalent measurement equipment may be used.|| **==> picture [228 x 7] intentionally omitted <==** **----- Start of picture text -----**<br> INSERTION LOSS VS. FREQUENCY CHARACTERISTICS<br>**----- End of picture text -----**<br> **==> picture [492 x 275] intentionally omitted <==** **----- Start of picture text -----**<br> 0<br>10<br>20<br>ett Aa<br>30<br>eRiN aeilill<br>40 eeek’ An, NW,<br>50<br>220<br>60 THT<br>400<br>360<br>70<br>10 100 1000 10000<br>CE [cree] Frequency (MHz) er<br>○ Measurement equipment<br>Product No. Manufacturer<br>N5230C Agilent Technologies<br>＊ Equivalent measurement equipment may be used.<br>Insertion loss (dB)<br>**----- End of picture text -----**<br> • All specifications are subject to change without notice. 001-01 / 20131004 / e9621_mea_signal_03.fm (7/11) ## **E M C C o m p o n e n t s** Eee MEA-PE series ## **MEA1608PE Type** ## **SHAPE & DIMENSIONS** **==> picture [140 x 146] intentionally omitted <==** **----- Start of picture text -----**<br> 1.6±0.1<br>CH1 CH2 CH3 CH4<br>GND GND<br>0.4±0.05 0.4±0.05 0.4±0.05<br>il<br>0.2±0.1 0.15min.<br>0.05min.<br>0.2±0.1 0.8±0.1<br>0.5±0.1<br>**----- End of picture text -----**<br> **==> picture [58 x 6] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions in mm<br>**----- End of picture text -----**<br> ## **RECOMMENDED LAND PATTERN** ## **CIRCUIT DIAGRAM** 2.0 0.2 to 0.25 0.15 to 0.2 ~~cot~~ _ ~~H~~ UUo ~~antt~~ 0.4 0.04 0.35 Dimensions in mm ~~igog~~ **==> picture [119 x 42] intentionally omitted <==** **----- Start of picture text -----**<br> CH1 CH2 CH3 CH4<br>GND<br>GND<br>**----- End of picture text -----**<br> • All specifications are subject to change without notice. 001-01 / 20131004 / e9621_mea_signal_03.fm (8/11) **E M C C o m p o n e n t s** _SSSSSSSSSSEEttrtrté‘=‘éael ## MEA-PE series **MEA1608PE Type** ## **ELECTRICAL CHARACTERISTICS** ## **CHARACTERISTICS SPECIFICATION TABLE** |**Capacitance**<br>**(pF)**|**Cutoff frequency**<br>**(MHz)typ.**|**Insertion loss 20dB**<br>**frequency range**<br>**(MHz)**|**Rated voltage**<br>**(V)max.**|**Rated current**<br>**(mA)max.**|**Part No.**| |---|---|---|---|---|---| |36|220|470 to 3000|6.3|100|MEA1608PE360T□□□| |27|240|470 to 3000|6.3|100|MEA1608PE270T□□□| |22|250|470 to 3000|6.3|100|MEA1608PE220T□□□| |15|270|—|6.3|100|MEA1608PE150T□□□| **==> picture [494 x 438] intentionally omitted <==** **----- Start of picture text -----**<br> ○ Measurement equipment<br>Measurement item Product No. Manufacturer<br>Capacitance 4294A Agilent Technologies<br>Frequency characteristics N5230C Agilent Technologies<br>＊ Equivalent measurement equipment may be used.<br>| INSERTION LOSS VS. FREQUENCY CHARACTERISTICS<br>0<br>10<br>20<br> A eet<br>30<br>40<br>50<br>150<br>270<br>60<br>360<br>220<br>70<br>80 SHH<br>10 100 1000 10000<br>Frequency (MHz)<br>Insertion loss (dB)<br>**----- End of picture text -----**<br> ○ Measurement equipment Product No. Manufacturer N5230C Agilent Technologies ＊ Equivalent measurement equipment may be used. • All specifications are subject to change without notice. 001-01 / 20131004 / e9621_mea_signal_03.fm (9/11) **E M C C o m p o n e n t s** ~~ee~~ —™ MEA-PE series ## **MEA2010PE Type** ## **SHAPE & DIMENSIONS** **==> picture [264 x 151] intentionally omitted <==** **----- Start of picture text -----**<br> 2.0±0.15<br>CH1 CH2 CH3 CH4<br>GND GND<br>0.5±0.1 0.5±0.1 0.5±0.1<br>0.25±0.1 0.15min.<br>Dimensions in mm<br>0.10min.<br>0.25±0.1 1.0±0.15<br>0.7±0.1<br>**----- End of picture text -----**<br> **RECOMMENDED LAND PATTERN CIRCUIT DIAGRAM** 2.80 CH1 CH2 CH3 CH4 1.60 GND GND ~~limi =e “Do~~ e ~~aa~~ 0.50 0.25 Dimensions in mm • All specifications are subject to change without notice. 001-01 / 20131004 / e9621_mea_signal_03.fm (10/11) ## MEA-PE series **MEA2010PE Type** ## **ELECTRICAL CHARACTERISTICS** ## **CHARACTERISTICS SPECIFICATION TABLE** |**Capacitance**<br>**(pF)**<br>**Cutoff frequency**<br>**(MHz)typ.**|**Capacitance**<br>**(pF)**<br>**Cutoff frequency**<br>**(MHz)typ.**|**Capacitance**<br>**(pF)**<br>**Cutoff frequency**<br>**(MHz)typ.**|**Capacitance**<br>**(pF)**<br>**Cutoff frequency**<br>**(MHz)typ.**|**Insertion loss 20dB**<br>**frequency range**<br>**(MHz)**|**Insertion loss 20dB**<br>**frequency range**<br>**(MHz)**|**Insertion loss 20dB**<br>**frequency range**<br>**(MHz)**|**Insertion loss 20dB**<br>**frequency range**<br>**(MHz)**|**Rated voltage**<br>**(V)max.**|**Rated voltage**<br>**(V)max.**|**Rated voltage**<br>**(V)max.**|**Rated voltage**<br>**(V)max.**|**Rated voltage**<br>**(V)max.**|**Rated voltage**<br>**(V)max.**||**Rated current**<br>**(mA)max.**|**Rated current**<br>**(mA)max.**|**Rated current**<br>**(mA)max.**|**Part No.**|**Part No.**|**Part No.**|||||| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |40||210||470 to 3000||||6.3|||||||100|||MEA2010PE400T□□□|||||||| |36||220||470 to 3000||||6.3|||||||100|||MEA2010PE360T□□□|||||||| |22||250||470 to 3000||||6.3|||||||100|||MEA2010PE220T□□□|||||||| |15||270||-—||||6.3|||||||100|||MEA2010PE150T□□□|||||||| |○Measurement equipment|||||||||||||||||||||||||| ||Measurement item<br>Product No.|||||Manufacturer|||||||||||||||||||| ||Capacitance<br>4294A|||||Agilent Technologies|||||||||||||||||||| ||Frequencycharacteristics<br>N5230C|||||Agilent Technologies|||||||||||||||||||| ||＊Equivalent measurement equipment may be used.|Equivalent measurement equipment may be used.|||||||||||||||||||||||| ||**INSERTION LOSS VS. FREQUENCY CHARACTERISTICS**||||||||||||||||||||||||| |Insertion loss (dB)||10<br>0<br>20<br>30<br>40<br>50<br>60<br>400<br>360<br>220<br>150<br>~~Seen Sf~~<br>~~ETI~~|||||||||||||||||||||||| |||10||100|||||||||1000||||||||||10000||| |||||||Frequency (MHz)|||||||||||||||||||| |||○Measurement equipment|||||||||||||||||||||||| |||Product No.|Manufacturer||||||||||||||||||||||| |||N5230C|Agilent Technologies||||||||||||||||||||||| |||＊Equivalent measurement equipment may be used.||||Equivalent measurement equipment may be used.|||||||||||||||||||| • All specifications are subject to change without notice. 001-01 / 20131004 / e9621_mea_signal_03.fm (11/11) **E M C C o m p o n e n t s** eee ## MEA-PE series ## **Packaging style** ## **REEL DIMENSIONS** **==> picture [182 x 182] intentionally omitted <==** **----- Start of picture text -----**<br> 2.0±0.5<br>1.0<br>ø13±0.2 8.4 [+2.0] –0.0<br>ø21±0.8 14.4max.<br>ø180±2.0<br>Dimensions in mm<br>ø60min.<br>**----- End of picture text -----**<br> ## **TAPE DIMENSIONS** **==> picture [338 x 347] intentionally omitted <==** **----- Start of picture text -----**<br> MEA1210PE, MEA1608PE<br>MEA2010PE<br>1.5 [+0.1] 0 2.0±0.05 4.0±0.1 t<br>A 4.0±0.1 K K<br>I e<br>Dimensions in mm<br>Type A B K t<br>MEA1210PE 1.20±0.05 1.45±0.05 0.73max. —<br>MEA1608PE 1.00±0.10 1.80±0.10 1.0max. 0.25±0.05<br>—= MEA2010PE 1.15±0.05 2.15±0.05 1.0max. —<br>160min. Taping 200min.<br>Drawing direction 300min.<br>MEA1210PE<br>MEA1608PE<br>MEA2010PE<br>Dimensions in mm<br>1.75±0.1<br>B 3.5±0.05 8.0±0.3<br>**----- End of picture text -----**<br> • All specifications are subject to change without notice. 001-01 / 20131004 / e9621_mea_signal_03.fm
Updated at June 10, 2026
TDK Corporation is a globally recognized leader in electronic components and magnetic materials. Founded in 1935 to commercialize ferrites, the Tokyo-based company has evolved into a comprehensive manufacturer of high-performance passive components, sensors, and power electronics. TDK’s advanced materials technology serves as the foundation for its extensive portfolio, driving innovation across automotive, industrial, consumer electronics, and communication technologies. Our selection of TDK components heavily features their industry-leading passive components, with a primary focus on magnetics. TDK excels in manufacturing reliable inductive solutions, offering a vast array of power inductors and RF inductors optimized for demanding power management and high-frequency applications. Furthermore, their expertise in electromagnetic compatibility is showcased through a comprehensive range of EMC and RFI suppression products. This includes common mode chokes, power line filters, and specialized shielding materials designed to ensure superior signal integrity in complex designs. Beyond inductors and filtering components, TDK provides robust circuit protection and sensing solutions essential for modern engineering. The portfolio includes precision temperature sensing and compensation NTC thermistors, alongside TVS varistors and inrush current limiting components that safeguard sensitive electronics. Complemented by fixed value inductors, supercapacitors, and charging coils, TDK's versatile product offering delivers the reliability and performance required for sophisticated circuit design.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 420,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →