Image not available
Illustrative purposes only
MCZ0806AH500L2T
Filter, Common Mode, MCZ-AH Series, 50 ohm, 100 mA, 0.85mm x 0.65mm x 0.45mm
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: TDK
- Product type: SMD Common Mode Chokes / Filters
- Rated Current:100mA; Inductance:-; Product Range:MCZ-AH Series; Impedance:50ohm; Common Mode Filter Case:0.85mm x 0.65mm x 0.45mm; Automotive Qualification Standard:-; SVHC:No SVHC (15-Jan
- SVHC: No SVHC (17-Jan-2023)
- Impedance: 50ohm
- Inductance: -
- Product Range: MCZ-AH Series
- Product Width: 0.65mm
- Qualification: -
- Product Height: 0.45mm
- Product Length: 0.85mm
- DC Current Rating: 100mA
- DC Resistance Max: 3ohm
- Common Mode Filter Case: 0.85mm x 0.65mm x 0.45mm
- Operating Temperature Max: 85°C
- Operating Temperature Min: -40°C
| Delivery and price | |
|---|---|
| Units per pack | 10000 |
| Price | 0.266 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
December 2013
## Common Mode Filters
For high-speed differential signal line (USB2.0, LVDS, etc.)
## MCZ-AH series
**MCZ0806AH [0302 inch]* MCZ1210AH [0504 inch] MCZ2010AH [0804 inch]**
- Dimensions Code JIS[EIA]
(2/11)
## **REMINDERS FOR USING THESE PRODUCTS**
Before using these products, be sure to request the delivery specifications.
## **SAFETY REMINDERS**
Please pay sufficient attention to the warnings for safe designing when using these products.
## **REMINDERS**
- ~~O~~ The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
~~O~~ Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
- ~~O~~ Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C.
- ~~O~~ Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
- ~~O~~ When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
- O Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design.
- ~~O~~ Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference.
~~O~~ Use a wrist band to discharge static electricity in your body through the grounding wire.
~~O~~ Do not expose the products to magnets or magnetic fields.
~~O~~ Do not use for a purpose outside of the contents regulated in the delivery specifications.
- ~~O~~ The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition.
- The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us.
- (1) Aerospace/Aviation equipment (8) Public information-processing equipment
- (2) Transportation equipment (cars, electric trains, ships, etc.) (9) Military equipment
(3) Medical equipment (10) Electric heating apparatus, burning equipment (4) Power-generation control equipment (11) Disaster prevention/crime prevention equipment (5) Atomic energy-related equipment (12) Safety equipment (6) Seabed equipment (13) Other applications that are not considered general-purpose (7) Transportation control equipment applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment.
001-01 / 20131227 / e9712_mcz_ah.fm
(3/11)
## **Common Mode Filters**
**For high-speed differential signal line (USB2.0, LVDS, etc.)**
**Product compatible with RoHS directive Halogen-free Compatible with lead-free solders**
## **Overview of the MCZ-AH Series**
## **FEATURES**
Compact multilayer common mode filter.
Has EMC suppression by achieving wide frequency range differential mode transmission while ensuring common mode impedance with virtually no affect on the high-speed differential transmission line signal.
## **APPLICATION**
Electronic equipment high-speed interface (LVDS, USB2.0, MHL)
Mobile phones, PCs, DSCs, portable game machines, etc.
PDP/LCD/DLP/PJ TVs, DVD players, DVCs, mobile audio, etc.
## **PART NUMBER CONSTRUCTION**
MCZ 1210 AH 360 L2 T ~~\____1______1____1______1____1___—~~ **L×W×T Dimensions Product internal Impedance Series name Number of lines Packaging style (mm) code ( ) at 100MHz** 0806 0.85×0.65×0.45 AH 360 36 L2 2 lines T Taping 1210 1.25×1.0×0.5 L4 4 lines 2010 2.0×1.0×0.5 ~~pe~~
## **OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT**
|**Type**|**Temperature range**|**Temperature range**|**Package quantity**|**Individual weight**|
|---|---|---|---|---|
||**Operating**<br>**temperature**|**Storage**<br>**temperature**|||
||（**°C**）|（**°C**）|（**pieces/reel**）|（**mg**）|
|**MCZ0806AH**|–40 to +85|–40 to +85|10,000|1.4|
|**MCZ1210AH**|–40 to +85|–40 to +85|4,000|3.0|
|**MCZ2010AH**|–40 to +85|–40 to +85|5,000|5.0|
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
• All specifications are subject to change without notice.
001-01 / 20131227 / e9712_mcz_ah.fm
(4/11)
## **Overview of the MCZ-AH Series**
## **RECOMMENDED REFLOW PROFILE**
||||Preheating|Preheating||Soldering<br>T4<br>Peak|Soldering<br>T4<br>Peak|Soldering<br>T4<br>Peak|Soldering<br>T4<br>Peak|Natural<br>cooling|||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|T:Temperature|T1|||T2|T3||t3|||T3|||
|||||t1|||t2||||||
||||||||||||||
|||||t:Time|||||||||
|**Preheating**|||||**Soldering**||||||**Peak**||
|**Temp.**|||**Time**||**Temp.**|||**Time**|||**Temp.**|**Time**|
|**T1**|**T2**||**t1**||**T3**|||**t2**|||**T4**|**t3**|
|150°C<br>180°C|||60 to 120s|60 to 120s|230°C||30 to 60s||||250 to 260°C|10s max.|
• All specifications are subject to change without notice.
001-01 / 20131227 / e9712_mcz_ah.fm
(5/11)
## **E M C C o m p o n e n t s** _SSSSSSSSSSSS—™t—_e MCZ-AH series
## **MCZ0806AH Type**
## **SHAPE & DIMENSIONS**
**==> picture [282 x 189] intentionally omitted <==**
**----- Start of picture text -----**<br>
0.85±0.05<br>0.5±0.10<br>4 3<br>1 2<br>0.27±0.10 Dimensions in mm<br>0.65±0.05<br>0.45±0.05<br>**----- End of picture text -----**<br>
## **RECOMMENDED LAND PATTERN**
**==> picture [96 x 9] intentionally omitted <==**
**----- Start of picture text -----**<br>
CIRCUIT DIAGRAM<br>**----- End of picture text -----**<br>
**==> picture [302 x 134] intentionally omitted <==**
**----- Start of picture text -----**<br>
0.30 4 3<br>1 2<br>£ al Es<br>oo • No polarity<br>0.20 Dimensions in mm<br>0.30<br>0.30<br>**----- End of picture text -----**<br>
• All specifications are subject to change without notice.
001-01 / 20131227 / e9712_mcz_ah.fm
(6/11)
## MCZ-AH series **MCZ0806AH Type**
## **ELECTRICAL CHARACTERISTICS**
## **CHARACTERISTICS SPECIFICATION TABLE**
|**Common mode impedance**<br>**[100MHz]**<br>**(**<br>**)**|**Common mode impedance**<br>**Tolerance**|**DC resistance**<br>**(**<br>**)max.**<br>**[1 line]**|**Rated current**<br>**(mA)max.**|**Rated voltage**<br>**(V)max.**|**Insulation**<br>**resistance**<br>**(M**<br>**)min.**|**Part No.**|
|---|---|---|---|---|---|---|
|22|±8|1.5|100|5|10|MCZ0806AH220L2T|
|35|±25%|2.5|100|5|10|MCZ0806AH350L2T|
|50|±25%|3.0|100|5|10|MCZ0806AH500L2T|
|90|±25%|4.0|100|5|10|MCZ0806AH900L2T|
|○Measurement equipment|||
|---|---|---|
|Measurement item|Product No.|Manufacturer|
|Common mode impedance|E4991A+16192A|Agilent Technologies|
|DC resistance|Type-7561|Yokogawa|
|Insulation resistance|4339B|Agilent Technologies|
- ＊ Equivalent measurement equipment may be used.
## **IMPEDANCE VS. FREQUENCY CHARACTERISTICS**
**==> picture [495 x 274] intentionally omitted <==**
**----- Start of picture text -----**<br>
10000<br>1000<br>900 Common mode<br>500 Common mode<br>100 350 Common mode<br>oN<br>ean 220 Common mode Lo<br>900 Differential mode<br>10 LE aii<br>500 Differential mode<br>SS ; ne<br>350 Differential mode<br>220 Differential mode<br>1 a nteee FLU | ttTT<br>1 10 100 1000 10000<br>Frequency (MHz)<br>○ Measurement equipment<br>Product No. Manufacturer<br>E4991A+16192A Agilent Technologies<br>＊ Equivalent measurement equipment may be used.<br>)Ω<br>Impedance (<br>**----- End of picture text -----**<br>
• All specifications are subject to change without notice.
001-01 / 20131227 / e9712_mcz_ah.fm
(7/11)
**E M C C o m p o n e n t s** a
## MCZ-AH series
## **MCZ1210AH Type**
## **SHAPE & DIMENSIONS**
**==> picture [265 x 202] intentionally omitted <==**
**----- Start of picture text -----**<br>
1.0±0.15<br>0.55±0.1<br>4 3<br>1 2<br>0.3±0.1 Dimensions in mm<br>0.15<br>±<br>1.25<br>0.1<br>±<br>0.5<br>**----- End of picture text -----**<br>
## **RECOMMENDED LAND PATTERN**
**==> picture [96 x 9] intentionally omitted <==**
**----- Start of picture text -----**<br>
CIRCUIT DIAGRAM<br>**----- End of picture text -----**<br>
**==> picture [302 x 165] intentionally omitted <==**
**----- Start of picture text -----**<br>
0.3 4 3<br>1 2<br>• No polarity<br>- al Es<br>if<br>0.25 Dimensions in mm<br>0.5<br>0.7 to 0.75<br>**----- End of picture text -----**<br>
• All specifications are subject to change without notice.
001-01 / 20131227 / e9712_mcz_ah.fm
(8/11)
## MCZ-AH series **MCZ1210AH Type**
## **ELECTRICAL CHARACTERISTICS**
## **CHARACTERISTICS SPECIFICATION TABLE**
|**Common mode impedance**<br>**[100MHz]**<br>**(**<br>**)**|**Common mode impedance**<br>**Tolerance**|**DC resistance**<br>**(**<br>**)max.**<br>**[1 line]**|**Rated current**<br>**(mA)max.**|**Rated voltage**<br>**(V)max.**|**Insulation**<br>**resistance**<br>**(M**<br>**)min.**|**Part No.**|
|---|---|---|---|---|---|---|
|36|±25%|1.00|200|5|10|MCZ1210AH360L2T|
|90|±25%|1.75|100|5|10|MCZ1210AH900L2T|
|200|±25%|4.00|100|5|10|MCZ1210AH201L2T|
|300|±25%|4.50|100|5|10|MCZ1210AH301L2T|
## ○ Measurement equipment
|Measurement item|Product No.|Manufacturer|
|---|---|---|
|Common mode impedance|E4991A+16192A|Agilent Technologies|
|DC resistance|Type-7561|Yokogawa|
|Insulation resistance|4339B|Agilent Technologies|
- ＊ Equivalent measurement equipment may be used.
**==> picture [208 x 7] intentionally omitted <==**
**----- Start of picture text -----**<br>
IMPEDANCE VS. FREQUENCY CHARACTERISTICS<br>**----- End of picture text -----**<br>
**==> picture [495 x 274] intentionally omitted <==**
**----- Start of picture text -----**<br>
10000 SSS<br>1000<br>ae 301 Common mode<br>fe 201 Common mode<br>900 Common mode<br>100<br>eer 360 Common mode eT<br>301 Differential mode<br>10 Se ee 201 Differential mode act<br>= ae —_—————— 900 Differential mode ———— ae<br>360 Differential mode<br>eete<br>1 pot UL cE LTE EE EE LTT<br>1 10 100 1000 10000<br>Frequency (MHz)<br>○ Measurement equipment<br>Product No. Manufacturer<br>E4991A+16192A Agilent Technologies<br>＊ Equivalent measurement equipment may be used.<br>)Ω<br>Impedance (<br>**----- End of picture text -----**<br>
• All specifications are subject to change without notice.
001-01 / 20131227 / e9712_mcz_ah.fm
(9/11)
## **E M C C o m p o n e n t s** ~~—~~ a rt—(_i_iee—”—C— MCZ-AH series **MCZ2010AH Type**
## **SHAPE & DIMENSIONS**
**==> picture [243 x 134] intentionally omitted <==**
**----- Start of picture text -----**<br>
2.0±0.15<br>0.5±0.1<br>8 7 6 5<br>1 2 3 4<br>0.25±0.1 Dimensions in mm<br>0.15<br>0.15 ±<br>± 0.2<br>1.0<br>0.1<br>±<br>0.5<br>**----- End of picture text -----**<br>
## **RECOMMENDED LAND PATTERN**
## **CIRCUIT DIAGRAM**
**==> picture [339 x 117] intentionally omitted <==**
**----- Start of picture text -----**<br>
8 7 6 5<br>1 2 3 4<br>• No polarity<br>a T ped<br>0.5 0.25 Dimensions in mm<br>H WE {i<br>0.6 1.8<br>**----- End of picture text -----**<br>
• All specifications are subject to change without notice.
001-01 / 20131227 / e9712_mcz_ah.fm
(10/11)
## MCZ-AH series **MCZ2010AH Type**
## **ELECTRICAL CHARACTERISTICS**
|**ELECTRICAL CHARACTERISTICS**|||||
|---|---|---|---|---|
|**ELECTRICAL CHARACTERISTICS**<br>**CHARACTERISTICS SPECIFICATION TABLE**<br>**Common mode impedance**<br>**[100MHz]**<br>**DC resistance**<br>**(**<br>**)max.**<br>**[1 line]**<br>**(**<br>**)**<br>**Tolerance**<br>|_|~~OO~~|**Rated current**<br>**(mA)max.**|**Rated voltage**<br>**(V)max.**|**Insulation**<br>**resistance**<br>**(M**<br>**)min.**|**Part No.**|
|90<br>±25%<br>1.50|100|5|10|MCZ2010AH900L4T|
|120<br>±25%<br>2.00|100|5|10|MCZ2010AH121L4T|
|200<br>±25%<br>3.50|100|5|10|MCZ2010AH201L4T|
|○Measurement equipment|||
|---|---|---|
|Measurement item|Product No.|Manufacturer|
|Common mode impedance|E4991A+16192A|Agilent Technologies|
|DC resistance|Type-7561|Yokogawa|
|Insulation resistance|4339B|Agilent Technologies|
- ＊ Equivalent measurement equipment may be used.
## **IMPEDANCE VS. FREQUENCY CHARACTERISTICS**
**==> picture [495 x 273] intentionally omitted <==**
**----- Start of picture text -----**<br>
10000<br>121 Differential mode 201 Differential mode<br>1000 Sse<br>201 Common mode<br>121 Common mode<br>900 Common mode<br>100<br>IN S<<br>10 NN 900 Differential mode<br>1<br>1 10 100 1000 10000<br>Frequency (MHz)<br>○ Measurement equipment<br>Product No. Manufacturer<br>E4991A+16192A Agilent Technologies<br>＊ Equivalent measurement equipment may be used.<br>)Ω<br>Impedance (<br>**----- End of picture text -----**<br>
• All specifications are subject to change without notice.
001-01 / 20131227 / e9712_mcz_ah.fm
(11/11)
**E M C C o m p o n e n t s** ————rt—“‘“——
## MCZ-AH series
## **Packaging style**
## **REEL DIMENSIONS**
**==> picture [182 x 181] intentionally omitted <==**
**----- Start of picture text -----**<br>
2.0±0.5<br>1.0<br>ø13±0.2 8.4 [+2.0] –0.0<br>ø21±0.8 14.4max.<br>ø180±2.0<br>Dimensions in mm<br>ø60min.<br>**----- End of picture text -----**<br>
## **TAPE DIMENSIONS**
**==> picture [348 x 260] intentionally omitted <==**
**----- Start of picture text -----**<br>
MCZ0806<br>MCZ2010 MCZ1210<br>1.5 [+0.1] 0 2.0±0.05 4.0±0.1 t<br>A P1 K K<br>sided!| )|<br>Dimensions in mm<br>Type A B P1 K t<br>MCZ0806AH 0.75±0.05 0.95±0.05 2.0±0.05 0.6max. 0.25±0.05<br>MCZ1210AH 1.15±0.1 1.4±0.1 4.0±0.1 1.0max. 0.25±0.05<br>MCZ2010AH 1.15±0.05 2.15±0.05 4.0±0.1 0.86max. —<br>——<br>160min. Taping 200min.<br>Drawing direction 300min. Dimensions in mm<br>1.75±0.1<br>B 3.5±0.05 8.0±0.3<br>**----- End of picture text -----**<br>
• All specifications are subject to change without notice.
001-01 / 20131227 / e9712_mcz_ah.fm
Updated at June 5, 2026
TDK Corporation is a globally recognized leader in electronic components and magnetic materials. Founded in 1935 to commercialize ferrites, the Tokyo-based company has evolved into a comprehensive manufacturer of high-performance passive components, sensors, and power electronics. TDK’s advanced materials technology serves as the foundation for its extensive portfolio, driving innovation across automotive, industrial, consumer electronics, and communication technologies. Our selection of TDK components heavily features their industry-leading passive components, with a primary focus on magnetics. TDK excels in manufacturing reliable inductive solutions, offering a vast array of power inductors and RF inductors optimized for demanding power management and high-frequency applications. Furthermore, their expertise in electromagnetic compatibility is showcased through a comprehensive range of EMC and RFI suppression products. This includes common mode chokes, power line filters, and specialized shielding materials designed to ensure superior signal integrity in complex designs. Beyond inductors and filtering components, TDK provides robust circuit protection and sensing solutions essential for modern engineering. The portfolio includes precision temperature sensing and compensation NTC thermistors, alongside TVS varistors and inrush current limiting components that safeguard sensitive electronics. Complemented by fixed value inductors, supercapacitors, and charging coils, TDK's versatile product offering delivers the reliability and performance required for sophisticated circuit design.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →