MCT070Z0TW1W800480LML

**Midas Components Limited Telephone** +44 (0)1493 602602 Electra House **Fax** +44 (0)1493 665111 32 Southtown Road **Email** sales@midasdisplays.com Great Yarmouth **Website** www.midasdisplays.com Norfolk NR31 0DU England 

**==> picture [318 x 119] intentionally omitted <==**

**----- Start of picture text -----**<br>
Specification<br>Part Number:<br>/ — |MeT070Z0TW1W800480LML<br>Version:<br>ee<br>Date:<br>Revision<br>0         2016/05/26         First issue<br>**----- End of picture text -----**<br>


## Contents 

- 1.Module Classification Information 

- 2.Summary 

- 3.General Specification 

- 4.Interface 

- 5.Contour Drawing 

- 6.Block Diagram 

- 7.Absolute Maximum Ratings 

- 8.Electrical Characteristics 

9.DC Characteristics 

10.AC Characteristics 

11.Optical Characteristics 

12.Reliability 

- 13.Touch Panel Information 

14.Other 

# **Midas Active Matrix Display Part Number System** 

**MC T 057 A 6 * W 320240 L M L * *** 1 2 3 4 5 6 7 8 9 10 11 12 13 

- 1 = MC: Midas Components 

2 = T: TFT A: Active Matrix OLED 

- 3 = Size 4 = Series 

- 5 = 

   - Viewing Angle: 6: 6 O’clock 12: 12 O’clock O: All Round Viewing Angle 

- 6 = Blank: No Touch T: Resistive Touchscreen C: Capacitive Touchscreen 

7 = Operating Temp Range: S: 0+50Deg C B: -20+60Deg C W: -20+70Deg C E: -30+85Deg C X: -30+80Deg C 

   - No of Pixels 

- 8 = No of Pixels 9 = Orientation:  P: Portrait L: Landscape 

- 10 = 

   - Mode:  R: Reflective M: Transmissive T: Transflective 

- S: Sunlight Readable (Transmissive) W: White on Black (Monochrome) 

- 11 = Backlight: Blank: None L: LED C: CCFL 

- 12 = Blank: No Module/board C: Controller board module (E-Tech) 13 = Blank: None OB: Optically Bonded IPS: In‐plane switching 

## **2.Summary** 

This technical specification applies to 7.0’ color TFT-LCD panel. The 7.0’ color TFT-LCD panel is designed for camcorder, digital camera application and other electronic products which require high quality flat panel displays. This module follows RoHS. 

## **3.General Specifications** 

-  Size: 7.0 inch 

-  Dot Matrix: 800 x RGBx480(TFT) 

-  Module dimension: 165.0(W) x 100(H) x 7.0(D) mm 

-  Active area: 154.08 x 85.92 mm 

-  Dot pitch: 0.0642 x 0.179 mm 

-  LCD type: TFT, Normally White, Transmissive 

-  View Direction: 12 o’clock 

-  Gray Scale Inversion Direction: 6 o’clock 

-  Backlight Type: LED, Normally White 

-  With /Without TP: With RTP 

-  Surface: Anti-Glare 

*Color tone slight changed by temperature and driving voltage. 

## **4.Interface** 

## **4.1. LCM PIN Definition** 

|**4.1. LCM PIN Definition**|**4.1. LCM PIN Definition**|||
|---|---|---|---|
|**Pin**|**Symbol**|**Function**|**Remark**|
|1|VLED-|Backlightground||
|2|VLED+|Power supplyfor backlight||
|3|GND|Powerground||
|4|VCC|Power for Digital Circuit||
|5|R0|Red data(LSB)|Note 1|
|6|R1|Red data|Note 1|
|7|R2|Red data||
|8|R3|Red data||
|9|R4|Red data||
|10|R5|Red data||
|11|R6|Red data||
|12|R7|Red data(MSB)||
|13|G0|Green data(LSB)|Note 1|
|14|G1|Green data|Note 1|
|15|G2|Green data||
|16|G3|Green data||
|17|G4|Green data||
|18|G5|Green data||
|19|G6|Green data||
|20|G7|Green data(MSB)||
|21|B0|Blue data(LSB)|Note 1|
|22|B1|Blue data|Note 1|
|23|B2|Blue data||
|24|B3|Blue data||
|25|B4|Blue data||
|26|B5|Blue data||
|27|B6|Blue data||
|28|B7|Blue data(MSB)||
|29|GND|Power Ground||
|30|CLK|Sample clock|Note 2|
|31|R/L|Right /Left selection|Note 3,4|
|32|Hsync|Horizontal Sync Input||
|33|Vsync|Vertical Sync Input||
|34|NC|No connection||
|35|U/D|Up/down selection|Note 3,4|
|36|RESET|Global resetpin.||
|37|NC|No connection||
|38|NC|No connection||
|39|NC|No connection||
|40|NC|No connection||



Note 1: When input 18 bits RGB data, the two low bits of R,G and B data must be grounded. Note 2: Data shall be latched at the falling edge of CLK. Note 3: Selection of scanning mode 

Setting of scan control Scanning direction U/D R/L GND VCC Up to down, left to right VCC GND Down to up, right to left GND GND Up to down, right to left VCC VCC Down to up, left to right Note 4: Definition of scanning direction. Refer to the figure as below: ~~pd~~ Up Left Right Down ~~a~~ Note 5: Global reset pin. Active low to enter reset state . Suggest to connect with an RC reset circuit for stability. Normally pull high. 

Note 6: Dithering function enable control, normally pull high. When DITHB=”1”, Disable internal dithering function, When DITHB=”0”, Enable internal dithering function, 

## **5.Contour Drawing** 

**==> picture [350 x 341] intentionally omitted <==**

**----- Start of picture text -----**<br>
PIN 1 2 3 4 1 VLED-<br>FT YU XR YD XL 2 VLED+<br>3 GND<br>4 VCC<br>5 R0<br>6 R1<br>7 R2<br>8 R3<br>9 R4<br>10 R5<br>t 4 11 R6<br>12 R7<br>4 13 G0<br>14 G1<br>15 G2<br>16 G3<br>17 G4<br>oY 18 G5<br>19 G6<br>20 G7<br>21 B0<br>22 B1<br>! b - 23 B2<br>oe 520,00 62.3 | - ' |l | 2425 B3B4<br>26 B5<br>27 B6<br>28 B7<br>29 GND<br>r o l 30 CLK<br>51.35 ! 1 a 5 31 R/L<br>32 Hsync<br>i_ A | A s u e r euer [90 u b e: 5,3: by 3334 VsNCync<br>i — a ‘s 35 U/D<br>=— oo 1 Pi c a 36 RESET<br>t JT 1 37 NC<br>| L iL,Bil in { 38 NC<br>isp — - 4 LP O 39 NC<br>40 NC<br>1 64 5 + ak 5<br>The non-specified tolerance of dimension is 0.3mm.<br>= pes &<br>A B82<br>/ i ag 4<br>[Asse a l<br>* =<br>37.65<br>3.5 5<br>10<br>**----- End of picture text -----**<br>


## **6.Block Diagram** 

**==> picture [469 x 182] intentionally omitted <==**

**----- Start of picture text -----**<br>
CLK -— TIMING<br>R0~R7 = CONTROLLER L a TFT LCD<br>G0~G7<br>| PANEL<br>B0~B7 ~ _<br>Vsync,Hsyn — c<br>RESET —<br>|a<br>VCC — |a DATA DRIVER IC<br>R/L,U/D —<br>GND —<br>VLED+<br>— LED CONNECTOR = BACKLIGHT UNIT<br>VLED-<br>SCAN DRIVER IC<br>INPUT CONNECTOR<br>**----- End of picture text -----**<br>


RTP Signal ~~—~~[XL][,][YU][,][XR][,][YD] 

**==> picture [27 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
RTP<br>**----- End of picture text -----**<br>


## **7.Absolute Maximum Ratings** 

|**Item**|**Symbol**|**Min**|**Typ**|**Max**|**Unit**|
|---|---|---|---|---|---|
|Operating Temperature|TOP|-20|－|+70||
|Storage Temperature|TST|-30|－|+80||



Note: Device is subject to be damaged permanently if stresses beyond those absolute maximum ratings listed above 

1. ＞ 

**==> picture [134 x 108] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ambient Tem. vs Alloeable Forward Curren<br>40<br>30<br>20<br>10<br>00 20 40 60 80 100<br>Ambient Temperature(oC)<br>Alloeable Forward Current IF(mA)<br>**----- End of picture text -----**<br>


## **8.Electrical Characteristics** 

## **8.1. Operating conditions:** 

|**8.1. Operating conditions:perating conditions:erating conditions:g conditions: conditions:**|||||||
|---|---|---|---|---|---|---|
|**Item**|**Symbol**|**Min**|**Typ**|**Max**|**Unit**|Remark|
|Supply Voltage For Logic|VCC|3.0|3.3|3.6|V|Note 1|
|Power Supply For Current|VCC =3.3V||110|165|mA||



Note 1 : This value is test for Vcc=3.3V , Ta=25 ℃ only 

## **8.2. LED driving conditions** 

|**8.2. LED driving conditionsg conditions conditions**|||||||
|---|---|---|---|---|---|---|
|Parameter|Symbol|Min.|Typ.|Max.|Unit|Remark|
|LEDcurrent|-|-|180|-|mA|-|
|PowerConsumption|-|1620|-|1890|mW|-|
|LED voltage|A~K|9.0|-|10.5|V|Note1|
|LED Life Time|-|-|50,000|-|Hr|Note<br>2,3,4|



Note 1 : There are 1 Groups LED 

Note 2 : Ta = 25 ℃ Note 3 : Brightness to be decreased to 50% of the initial value Note 4 : The single LED lamp case 

## **9.DC CHARATERISTICS** 

|**Parameter**|**Symbol**|**Rating**|**Rating**|**Rating**|**Unit**|**Condition**|
|---|---|---|---|---|---|---|
|||**Min**|**Typ**|**Max**|||
|Low level input voltage|VIL|0|-|0.3VCC|V||
|High level input voltage|High level input voltage<br>VIH|0.7VCC|-|VCC|V||



## **10.AC CHARATERISTICS** 

## **10.1. AC Electrical Characteristics** 

|**Signal**|**Symbol**|**Min**|**Typ**|**Max**|**Unit**|
|---|---|---|---|---|---|
|HS setuptime|Thst|8|-|-|ns|
|HS hold time|Thhd|8|-|-|ns|
|VS setuptime|Tvst|8|-|-|ns|
|VS hold time|Tvhd|8|-|-|ns|
|Data setuptime|Tdsu|8|-|-|ns|
|Data hole time|Tdhd|8|-|-|ns|
|VCC Power On Slew rate|TPOR|-|-|20|ms|
|RESETpulse width|TRst|1|-|-|ms|
|DCLK cycle time|Tcoh|20|-|-|ns|
|DCLKpulse duty|Tcwh|40|50|60|%|



## **10.2. Input Clock and Data Timing Diagram** 

## **10.3. Timing** 

|**10.3. Timingg **|||||||
|---|---|---|---|---|---|---|
|**Item**|**Symbol**|**Values**|||**Unit**|**Remark**|
|||**Min.**|**Typ.**|**Max.**|||
|CLK Frequency (DCLK)|fclk|26.4|33.3|46.8|MHz||
|Horizontal DisplayArea|thd|-|800|-|CLK||
|One Horizontal Line|th|862|1056|1200|CLK||
|HSpulse width|thpw|1|-|40|CLK||
|HS Blanking|thb|46|46|46|CLK||
|HS Front Porch|thfp|16|210|354|CLK||
|Vertical DisplayArea|tvd|-|480|-|TH||
|VSperiod time|tv|510|525|650|TH||
|VSpulse width|tvpw|1|-|20|TH||
|VS Blanking|tvb|23|23|23|TH||
|VS Front Porch|tvfp|7|22|147|TH||



## **10.4. Data Input Format** 

Fig. Horizontal input timing diagram 

Fig. Vertical input timing diagram 

## **11.Optical Characteristics** 

**==> picture [476 x 182] intentionally omitted <==**

**----- Start of picture text -----**<br>
pe Item Symbol Condition. Min Typ. Max. Unit Remark<br>Tr  -  10 20 .ms<br>Response time  θ=0° 、 Φ=0°  Note 3<br>ee Tf  -  15 30 .ms<br>At optimized<br>Contrast ratio  CR  400  500  -  -  Note 4<br>a viewing angle<br>Wx  0.26 0.31 0.36 -<br>Color Chromaticity  White  θ=0° 、 Φ=0  Note 2,5,6<br>rs Wy 0.28 0.33 0.38 -  —<br>p ΘR  a - 75 -<br>Viewing angle  Hor.  ΘL  - 75 -<br>(Gray Scale Inversion  =e ΦT  e - 75 -  Deg.  Note 1<br> Direction)  Ver.  ΦB  - 75 -<br>Brightness  -  -  150  250  -  cd/m [2] [Center of ]<br>display<br>Ta=25+21), Po IL=180mA | a ee<br>**----- End of picture text -----**<br>


Note 1: Definition of viewing angle range 

Fig. 11.1. Definition of viewing angle 

## Note 2: Test equipment setup: 

After stabilizing and leaving the panel alone at a driven temperature for 10 minutes, the measurement should be executed. Measurement should be executed in a stable, windless, and dark room. Optical specifications are measured by Topcon BM-7orBM-5 luminance meter 1.0° field of view at a distance of 50cm and normal direction. 

Fig. 11.2. Optical measurement system setup 

## Note 3: Definition of Response time: 

The response time is defined as the LCD optical switching time interval between “White” state and “Black” state. Rise time, Tr, is the time between photo detector output intensity changed from 90%to 10%. And fall time, Tf, is the time between photo detector output intensity changed from 10%to 90% 

**==> picture [377 x 81] intentionally omitted <==**

**----- Start of picture text -----**<br>
D is p la y<br>D a ta W h ite (T F T  O F F ) B la c k (T F T  O N ) W h ite (T F T  O F F )<br>1 0 0 %<br>9 0 %<br>aos<br>SS<br>=<br>1 0 %<br>: 0 % : |<br>**----- End of picture text -----**<br>


Note 4: Definition of contrast ratio: 

The contrast ratio is defined as the following expression. 

Lum inance m easured when LCD on the "W hite" state 

Contrast ratio (CR) = Lum inance m easured when LCD on the "Black" state 

Note 5: White Vi = Vi50 ± 1.5V Black Vi = Vi50 ± 2.0V 

“±” means that the analog input signal swings in phase with VCOM signal. 

“±” means that the analog input signal swings out of phase with VCOM signal. The 100% transmission is defined as the transmission of LCD panel when all the input terminals of module are electrically opened. 

Note 6: Definition of color chromaticity (CIE 1931) Color coordinates measured at the center point of LCD 

Note 7: Measured at the center area of the panel when all the input terminals of LCD panel are electrically opened. 

## **12.Reliability** 

**Environmental Test** 

**==> picture [472 x 379] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||
|---|---|---|---|---|---|---|
|DG|Test Item|Content|of Test|Test|Condition|Note|
|High Temperature|Endurance test applying the high storage temperature|2|
|a|storage|ee|for a long time.|200hrs|
|Low Temperature|Endurance test applying the low storage temperature|1,2|
|a|storage|for a long time.|200hrs|
|High Temperature|Endurance test applying the electric stress (Voltage &|——|
|Operation|Current) and the thermal stress to the element for a|200hrs|
|long time.|
|Low Temperature|Endurance test applying the electric stress under low|1|
|a|Operation|temperature for a long time.|200hrs|
|High Temperature/|The module should be allowed to stand at|1,2|
|Humidity|Operation|6001,90%RH|max|96hrs|
|Thermal shock|The sample should be allowed stand the following 10|-2011/7001|——|
|resistance|cycles of|10 cycles|
|operation|
|-2000|250|700|
|30min   5min    30min|
|1 cycle|
|Vibration test|Endurance test applying the vibration during|Total fixed amplitude : 3|
|transportation and using.|15mm|
|Vibration Frequency :|
|10~55Hz|
|One cycle 60|
|seconds to 3|
|directions of X,Y,Z for|
|Each 15 minutes|
|Static electricity test|Endurance test applying the electric stress to the|VS=±600V(contact)|——|
|terminal.|,±800v(air),|
|RS=330Ω|
|CS=150pF|
|10 times|

**----- End of picture text -----**<br>


Note1: No dew condensation to be observed. 

Note2: The function test shall be conducted after 4 hours storage at the normal Temperature and humidity after remove from the test chamber. Note3: The packing have to including into the vibration testing. 

## **13.Touch Panel Information** 

||~~aE~~<br>ry|~~E~~|~~E~~||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
||LOGIC|||||||||ITO Film||||ITO Film|||||||ITO Film 0.188mm||||||||ITO Glass 1.1mm|||||ITO Glass|ITO Glass||||
||~~t~~|||||||~~od~~|||||||||||||||||||||||||||~~a~~|~~a~~|~~a~~|~~a~~|
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||f||STIFFENER<br>CONTACT SIDE<br>~~vy~~||||~~4~~||||||||||
||||'|||||||||||||||||||||~~a~~|||||||||||||~~aK~~|~~aK~~|~~aK~~|
||NOTE¡ G||||||||||||||||||||||||||||||||||||||
||1¡ BDriving condition:DC3¡ ã7V¡ F||||||||||||||||||||||||||||||||||||||
||2¡ BOperating force¡ G30~80g¡ F||||||||||||||||||||||||||||||||||||||
||3¡ BLinearity max? ¡ Ó1.5%¡ FInsulating resistance¡ Ö10M£ [¡ A25V(DC)¡||||||||||F||||||||||||||||||||||||||||
||4¡ BOperating environment¡ G-20¢ J~+70¢ J¡ A? 90%RH¡||||F||||||||||||||||||||||||||||||||||
||5¡ BStorage environment¡ G-30¢ J~+80¢ J¡ A¡ Õ90%RH¡ F||||||||||||||||||||||||||||||||||||||
||6¡ BLight transparence¡ G¡ Ö75%¡ F||||||||||||||||||||||||||||||||||||||
||7¡ BStructure type¡ GITO Film/ITO Glass(F/G)¡ F||||||||||||||||||||||||||||||||||||||
||8¡ BConnector type¡ GFPC connect¡ F||||||||||||||||||||||||||||||||||||||
||9¡ BITO Film type¡ GClear hard and anti-newton ring coating¡ F||||||||||||||||||||||||||||||||||||||
||10¡ BUseful life¡ G1,000,000times(input test)¡ F||||||||||||||||||||||||||||||||||||||
||11¡ Bound time¡ G¡ Õ10ms¡ C||||||||||||||||||||||||||||||||||||||
||12¡ BROHS compliant¡ C||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|13.1. Resistance Touch Panel General Specifications||||||13.1. Resistance Touch Panel General Specifications|||||||13.1. Resistance Touch Panel General Specifications|13.1. Resistance Touch Panel General Specifications|||||||||||||||||||||||||
||Item|||||||||||||||Description||||||||||||tion|||||||||||
||Drivingcondition|||||||||||||||DC3~7V|||||||||DC3~7V||||||||||||||
||Operatingforce|||||||||||||||30~80g|||||||||||||||||||||||
||Linearitymax||max|||||||||||||≤±1.5%||||||||≤±1.5%|≤±1.5%||||||||||||||
||Insulating resistance||||Insulating resistance||||||||||＞10MΩ，25V(DC)||||||||||||||||25V(DC)||||||||
||Light transparence|||||||||||||||70%|||||||||||||||||||||||
||Structure type|||||||||||||ITO Film/ITO Glass|||||ITO Film/ITO Glass(F/G)||||||||||||||||||||
||Surface Hardness|||Surface Hardness||||||||||||3H t||3H typ|||||||||||||||||||||
|Pen Hitting Durability<br>(with the silicon rubber)||||||||||||||||＞1000,000 times||||||1000,000 times|||||||||||||||||
||X Axis resistance|||X Axis resistance||||||||||||430~910Ω||||||||||430~910Ω|430~910Ω|430~910Ω|||||||||||
||Y Axis resistance|||Y Axis resistance||||||||||||150~530Ω||||||||||150~530Ω|150~530Ω|150~530Ω|||||||||||