MCOT128064N2Z-YBM

Electra House, 32 Southtown Road Great Yarmouth, Norfolk NR31 0DU, England 

Telephone +44 (0)1493 602602 Fax +44 (0)1493 665111 Email:sales@midasdisplays.com www.midasdisplays.com 

|MCOT128064N2Z-YBM|128 x 64<br>Yellow and Blue|128 x 64<br>Yellow and Blue||OLED Module|
|---|---|---|---|---|
|||**Specification **|||
|Version:    1||Date:  16/05/2017|||
|||**Revision**|||



|DisplayFeatures|DisplayFeatures|||
|---|---|---|---|
|Resolution|128 x 64|||
|Appearance|Yellow and Blue on Black|||
|Logic Voltage|3V|||
|Interface|Parallel / SPI / I2C|||
|Module Size|26.70 x 19.26 x 1.65|||
|OperatingTemperature|-30°C ~ +70°C|BoxQuantity|Weight / Display|
|Construction|TAB|---|---|



* - For full design functionality, please use this specification in conjunction with the SSD1306 specification. (Provided Separately) 

|**Display Accessories**|**Display Accessories**|
|---|---|
|**Part Number**|**Description**|
||Direct solder interconnect board.|
|MPBV4-ISS2|Driven by any driver board that can<br>be wired to a 2mm pitch 50-way|
||DIL.|



|**Optional Variants**||
|---|---|
|**Appearance**|**Voltage**|
|White on Black||
|Yellow on Black||



|**Mechanical Specifications**|**Mechanical Specifications**|**Mechanical Specifications**|**Mechanical Specifications**|**Mechanical Specifications**|
|---|---|---|---|---|
|Module Size|26.70 x 19.26 x 1.65 ( With Backlight)|||W x H x D mm|
|Viewing Area|23.74 x 13.20|W x H mm<br>Hole-to-Hole|Hole-to-Hole<br>---|W x H mm|
|Dot Size|0.148 x 0.148|W x H mm<br>Dot Pitch|Dot Pitch<br>0.17 x 0.17|W x H mm|



**==> picture [471 x 559] intentionally omitted <==**

**----- Start of picture text -----**<br>
1 .65MAX<br>0.7<br>0.7<br>Polarizer<br>Glue 26.7±0.2<br>0.5 25.7(Polarizer)<br>shading tape<br>1.478 23.744(VA)<br>2.478 21.744 (AA)<br>10.00 5.00<br>0.1<br>Active Area 0.96"<br>128  x  64 Pi xels<br>—Ly<br>2-R0.4±0.05<br>1 Se Ee TOIT AR I E 30<br>1 2<br>1 6 (Alignment Mark)<br>P0.70x(30-1)=20.3 (W0.40<br>± 0.03 0.85)<br>(2.35) 22<br>The non-specified tolerance of dimension is  : 0.3mm.<br>128x16 Yellow<br>128x48 SkyBlue a Mis<br>0.17<br>Segment 127 Segment 0 0.148<br>(Column 1) (Column 128) i at<br>Common 32 Common 0<br>(Row 63) (Row 64)<br>Common 63 Common 31 i<br>(Row 1)   (Row 2) SCALE: 10/1<br>0.5 1.098 2.098<br>Contact Side<br>)<br>Contact Side<br>A) 8.00<br>15.5±0.2<br>13.204(VA) 11.204 (A<br>14.4(Polarizer<br>19.26±0.2<br>(31.26)<br>12 1 1 6.887 4<br>2<br>4.75<br>0.17 0.148<br>**----- End of picture text -----**<br>


|MCOT128064N2Z-YBM||128 x 64|128 x 64|128 x 64|128 x 64||Yellow and Blue|Yellow and Blue|OLED Module|
|---|---|---|---|---|---|---|---|---|---|
|||||||**Specification**||||
|Version:    1|Version:    1||||||Date:  16/05/2017|Date:  16/05/2017||
|||||||**Revision**||||



|||||
|---|---|---|---|
|**Pin layout**||||
|**Pin**|**Symbol**|**Description**|**Remarks**|
|1|NC (Ground)|Reserved pin (Supporting Pin). Must connect to external ground.||
|2|C2N|Positive terminal of flying inverting capacitor.<br>Negative terminal of flying boost capacitor.<br>Charge-pump CAPs required between terminals. Must be floated<br>when converter is not used.||
|3|C2P|||
|4|C1P|||
|5|C1N|||
|6|VBAT|Power Supply for DC/DC converter circuit.<br>Connect to external source when converter in use. Connect to VDD<br>when notinuse.||
|7|NC|No Connection||
|8|VSS|Ground of Logic Circuit.<br>Must be connected to external ground.||
|9|VDD|Power Supply for Logic.<br>Connect to externalsource.||
|10|BS0|Communicating Protocol Select. MCU<br>interface selection inputs.<br>I2C: BS0= 0 BS1= 1 BS2= 0<br>3-Wire SPI: BS0= 1 BS1= 0 BS2= 0 4-Wire<br>SPI: BS0= 0 BS1= 0 BS2= 0 6800 Parallel:<br>BS0= 0 BS1= 0 BS2= 1 8080 Parallel: BS0=<br>0BS1= 1 BS2= 1||
|11|BS1|||
|12|BS2|||
|13|CS#|Chip Select.<br>PulledLow = Enabledfor MCU communication.||
|14|RES#|Power Reset for Controller and Driver.<br>Whenpin islow,initialisationofchipis executed.||
|15|D/C#|Data / Command Control.<br>Pulled High = Input at D7~D0 is treated as display data. Pulled Low =<br>Input at D7~D0 will be transferred to the command register.<br>Pulled High in SPI mode = Data at SDIN treated as data. Pulled Low in<br>SPI mode = Data at SDIN will be transferred to the command register.<br>I2C mode pin acts as SA0 for slave address selection.||
|16|R/W#|Read / Write Select or Write.<br>MCU interface pin. When interfacing to 6800 microprocessor, this will<br>be used as Read / Write (R/W#) selection input. Pull High for Read and<br>Low for Write.<br>8080 interface mode is selected, this will be used as Write<br>(WR#) input. Data write operation is initiated when this pin is puled Low<br>and the CS#is pulledLow.||
|17|E/RD#|Read / Write Enable or Read.<br>MCU interface input. When interfacing to 6800 microprocessor, this<br>will be used as Enable (E) signal. Read/Write initiated when pin pulled<br>High and CS# is pulled Low.<br>Connecting to an 8080 microprocessor, this pin receives the Read<br>(RD#) signal. Data read operation is initiated when is pin is pulled Low<br>and CD# is pulled Low.||
|18-25|D0~D7|Host Data Input / Output Bus.<br>8 bit Bi-directional data bus to be connected to microprocessors data<br>bus. SPI selected, D1 will be SDIN and D0 will be SCLK. I2C selected,<br>D2 and D1 should be tied together and serve as SDAout and SDAin in<br>application and D0 is SCL.||
|26|IREF|Current Reference for Brightness Adjustment.<br>Resistor connected between this pin and VSS current lower than<br>12.5µA.||
|27|VCOMH|Voltage Output High Level for COM Signal.<br>Pin is the input pin for the voltage output high level for COM signals.<br>Capacitorconnected betweenthis pinandVSS.||
|28|VCC|Power Supply for OEL Panel.<br>Stabilisation capacitor should be connected between this pin and VSS<br>when converter is used. Connect to external source when converter not<br>used.||
|29|VLSS|Ground of Analog Circuit.<br>Connect toVSS externally.||
|30|NC (Ground)|Reserved Pin (Supporting Pin) Must connect to external ground.||



|MCOT128064N2Z-YBM|128 x 64|128 x 64|Yellow and Blue|OLED Module|
|---|---|---|---|---|
|**Specification**|||||
|Version:    1||Date:  16/05/2017|||
|**Revision**|||||
||||||



## **Absolute Maximums Ratings** 

|**Absolute Maximums Ratings**|**Absolute Maximums Ratings**|**Absolute Maximums Ratings**|**Absolute Maximums Ratings**|**Absolute Maximums Ratings**|**Absolute Maximums Ratings**|
|---|---|---|---|---|---|
|**Item**|**Symbol**|**Minimum**|**Typical**|**Maximum**|**Unit**|
|SupplyVoltage for Display|VCC|0.00|---|15.00|V|
|SupplyVoltage for Logic|VDD|0.00|---|3.30|V|
|Operating Temperature|Vopr|-30|---|70|°C|
|Storage Temperature|Vstg|-40|---|80|°C|



**Electronic Characteristics** 

|**Electronic Characteristics**|**Electronic Characteristics**|**Electronic Characteristics**|**Electronic Characteristics**|**Electronic Characteristics**|**Electronic Characteristics**|**Electronic Characteristics**|
|---|---|---|---|---|---|---|
|**Item**|**Symbol**|**Condition**|**Minimum**|**Typical**|**Maximum**|**Unit**|
|Input High Voltage|VIH|---|0.80|---|VDD|V|
|Input Low Voltage|VIL|---|GND|---|0.20|V|
|Output High Voltage|VOH|IOH=-0.5mA|0.90|---|VDD|V|
|Output Low Voltage|VOL|IOL=0.5mA|GND|---|0.10|V|
|Supply Voltage for Logic|VDD|---|2.80|3.00|3.30|V|
|Supply Voltage for Display|VCC|---|10.00|12.00|15.00|V|
|50% Checkboard<br>OperatingCurrent.|IDD|VDD=5V|9.00|10.00|12.00|mA|



## **OLED Characteristics** 

|**OLED Characteristics**|**OLED Characteristics**|**OLED Characteristics**|**OLED Characteristics**|**OLED Characteristics**|**OLED Characteristics**|**OLED Characteristics**|
|---|---|---|---|---|---|---|
|**Item**|**Symbol**|**Condition**|**Minimum**|**Typical**|**Maximum**|**Unit**|
|Viewing Angle|(V)θ|---|160|---|---|Deg|
||(H)φ|---|160|---|---|Deg|
|Contrast Ratio|CR|Dark|2000:1|---|---|---|
|Response Time|T Rise|---|---|10|---|µs|
||T Fall|---|---|10|---|µs|
|Display with 50% Checkboard Brightness|||60|80|---|cd/m2|
|CIEx(Yellow)||(CIE1931)|0.45|0.47|0.49|---|
|CIEy(Yellow)||(CIE1931)|0.48|0.50|0.52|---|
|CIEx(SkyBlue)||(CIE1931)|0.12|0.16|0.20|---|
|CIEy(SkyBlue)||(CIE1931)|0.22|0.26|0.30|---|



## **OLED Life Time** 

|**OLED Life Time**|**OLED Life Time**|**OLED Life Time**|**OLED Life Time**|
|---|---|---|---|
|**Item**|**Conditions**|**Typical**|**Remark**|
|Operating Life Time|Ta=25°C. Initial checkboard<br>brightness, 50%.|10,000 Hours|---|



MCOT128064N2Z-YBM 128 x 64 Yellow and Blue **Specification** Version:    1 Date:  16/05/2017 **Revision** 

OLED Module