MCOT096016AY-WI

**Midas Components Limited Telephone** +44 (0)1493 602602 Electra House **Fax** +44 (0)1493 665111 32 Southtown Road **Email** sales@midasdisplays.com Great Yarmouth **Website** www.midasdisplays.com Norfolk NR31 0DU England 

**==> picture [208 x 104] intentionally omitted <==**

**----- Start of picture text -----**<br>
Specification<br>Part Number:<br>|=|<br>Version:<br>ee<br>Date:<br>8103/2015<br>Revision<br>**----- End of picture text -----**<br>


## Content 

||History of versions and modifications ............................................................................................................. 3|
|---|---|
||Coding system ............................................................................................................................................... 3|
||Functions and Features .................................................................................................................................. 4|
||Mechanical Specification ................................................................................................................................ 4|
||Mechanical Drawing ....................................................................................................................................... 5|
||Pin Description ............................................................................................................................................... 6|
||Block Diagram ................................................................................................................................................ 8|
||DC Characteristics ....................................................................................................................................... 10|
||Optical Characteristics ................................................................................................................................. 10|
||Absolute Maximum rating ............................................................................................................................. 11|
||AC Characteristics ........................................................................................................................................ 11|
||Actual Application Example .......................................................................................................................... 12|



## **Midas Displays OLED Part Number System** 

**MCO B 21605 A * V - E W I * 1 2 3 4 5 6** 7 8 9 10 1 = **MCO:** Midas Displays OLED 2 = **Blank: B** : COB (Chip on Board) **T** : TAB (Taped Automated Bonding) 3 = **No of dots: (** e.g. 240064 = 240 x 64 dots) (e.g. 21605 = 2 x 16 5mm C.H.) 4 = **Series** A to Z 5 = **Series Variant:** A to Z and 1 to 9 **– see addendum** 6 = **Operating Temp Range:  A:** -30+85° C **V:** -40+80° C **Y:** -40 +70° C **Z:** -30+70° C **X** : -40 +85° C 7 = **Character Set: Blank** : Not Applicable **E:** Multi European Font Set (English/Japanese – Western European (K) – Cyrillic (R)) 8 = **Colour: Y:** Yellow **W:** White **B:** Blue **R:** Red **G:** Green **RGB** : Full Colour 9 = **Interface: P:** Parallel **I:** I²C **S:** SPI **M:** Multi 10 = **Voltage Variant:** e.g. **3** = 3v 

F/Displays/Midas Brand/Midas NEW OLED Part Number System 18 June 2013 2011.doc 

## **Functions and Features** 

- 96X16 Graphic 

- Built ­ in controller 

- viewing angle Free 

- Wide Temperature ‐40 ℃ ~ +80 ℃ 

- RoHS compliant 

## **Mechanical Specification** 

|**Item**|**Description**||
|---|---|---|
|Product No.MCOT096016AY-WI|MCOT096016AY-WI||
|Inch|0.69”||
|Color|White||
|Active Area|17.26(W)×3.18(H)|mm|
|Panel Size|26.30(W)×8.00(H)×1.30 (D)mm|mm|
|Dot Size|0.16(W)×0.18(H)|mm|
|Dot Pitch|0.18(W)×0.20(H)|mm|
|Display Format|96 ×16||
|Duty Ratio|1/16 Duty|Duty|
|Controller|SSD1306 or Equivalent||
|Operation Temperature|-40~80|°C|
|Storage Temperature|-40~85|°C|
|Response Time|≤10|us|
|Assembly|Soldering||



## **Mechanical Drawing** 

||**Pin Description**|**Pin Description**|**Pin Description**||
|---|---|---|---|---|
||**Power Supply**|**Power Supply**|||
|Pin Number<br>Symbol<br>Type<br>Function<br>8<br>VDD<br>P<br>**Power Supply for Logic Circuit**<br>This is a voltage supply pin. It must be connected to external source.<br>7<br>VSS<br>**Ground of OEL System**<br>This is a ground pin. It also acts as a reference for the logic pins. It must<br>be connected to external ground.<br>14<br>VCC<br>**Power Supply for OEL Panel**<br>This is the most positive voltage supply pin of the chip. It must be<br>supplied externally.<br>~~—~~|||||
||**Driver**||||
|**Pin Number**<br>**Symbol**<br>**Type**<br>**Function**<br>12<br>IREF<br>I<br>**Current reference for Brightness Adjustment**<br>This pin is segment current reference pin. A resistor should be connected<br>between this pin and VSS. Set the current at 10μA maximum.<br>13<br>VCOMH<br>O<br>**Voltage Output High Level for COM Signal**<br>This pin is the input pin for the voltage output high level for COM signals.<br>A tantalum capacitor should be connected between this pin and VSS.<br>~~“MAS~~|||||
||**DC/DC Converter**||||
||**Pin Number**|**Symbol**|**Type**|**Function**|
|||||**Power Supply for DC/DC Converter Circuit**|
||5|VDDB|P|This is the power supply pin for the internal buffer of the DC/DC voltage|
|||||converter. It must be connected to external source when the converter is|
|||||used. It should be connected to VDDwhen the converter is not used.|
|||||**Positive Terminal of the Flying Inverting  Capacitor**|
||3/4|C1P/C1N|I|**Negative Terminal of the Flying  Boost  Capacitor**|
||1/2|C2P/C2N||The charge-pump capacitors are required between the terminals. They|
|||||must be floated when the converter is not used.|



## **Interface** 

|**Interface**||||
|---|---|---|---|
|**Pin Number**|**Symbol**|**Type**|**Function**|
|9|RES#|I|**Power Reset for Controller and Driver**<br>This pin is reset signal input. When the pin is low, initialization of the chip<br>is executed. Keep this pin pull high during normal operation.|
|10|SCL||**I2C Bus Clock Signal**<br>The transmission if information in the I2C bus is following a clock signal.<br>Each transmission of data bit is taken place during a single clock period<br>of this pin.|
|11|SDA|I/O|**I2C Bus Data Signal**<br>This pin acts as a communication channel between the transmitter and<br>the receiver.|



**Reserve** 

**Pin Number Symbol Type Function Reserved Pin** 6 N.C. - The N.C. pin between function pins is reserved for compatible and flexible design. It must be floated. ~~haa~~ 

## **Block Diagram** 

## **VCC Supplied Externally** 

Pins connected to MCU interface: RES#, SCL, and SDA 

C1: 1μF C2: 4.7μF 

C3: 4.7μF / 16V X7R 

R1: 820kΩ, R1 = (Voltage at IREF - VSS) / IREF 

R2, R3: 2k 

## **VCC Generated by Internal DC/DC Circuit** 

Pins connected to MCU interface: RES#, SCL, and SDA 

C1, C2: 1μF 

C3: 2.2μF 

C4: 4.7μF / 16V X7R 

C5, C6: 1μF / 16V X5R 

R1: 820kΩ, R1 = (Voltage at IREF - VSS) / IREF 

R2, R3: 2k 

## **DC Characteristics** 

|**Item**|**Symbol**|**Condition**|**Min.**|**Type**|**Max.**|**Unit**|
|---|---|---|---|---|---|---|
|Supply Voltage for Logic|VCI||1.65|2.8|3.3|Volt|
|Supply Voltage for Display<br>(Supplied Externally)|VCC|Note 4<br>(Internal DC/DC Disable)|7.0|7.25|7.5|Volt|
|Supply Voltage for DC/DC|VDDB|Internal DC/DC Enable|3.3|-|4.2|Volt|
|Supply Voltage for Display<br>(Generated by Internal DC/DC)|VCC|Note 4<br>(Internal DC/DC Disable)|7.0|-|7.5|Volt|
|Operating Current for VDD|IDD||-|180|300|μA|
|Operating Current for VCC<br>(VCC Supplied Externally)|ICC|Note 5|-|2.0|3.0|mA|
|||Note 6|-|2.5|3.8|mA|
|||Note 7|-|5.0|7.5|mA|
|Operating Current for VCC<br>(VCC Generated by Internal DC/DC)|IDDB|Note 5|-|3.5|5.3|mA|
|||Note 6|-|4.0|6.0|mA|
|||Note 7|-|4.5|6.8|mA|
|Sleep Mode Current for VDD|IDD,SLEEP|||1|5|μA|
|Sleep Mode Current for VCC|ICC,SLEEP||-|2|10|μA|



Note 4: Brightness (Lbr) and Supply Voltage for Display (VCC) are subject to the change of the panel 

characteristics and the customer’s request. 

Note 5: VDD = 2.8V, VCC = 7.25V, 30% Display Area Turn on. Note 6: VDD = 2.8V, VCC = 7.25V, 50% Display Area Turn on. 

Note 7: VDD = 2.8V, VCC = 7.25V, 100% Display Area Turn on. 

## **Optical Characteristics** 

|Item|Symbol|Conditions|Min.|Typ|Max.|Unit|
|---|---|---|---|---|---|---|
|Brightness(White)|Lbr|Note 4|120|150|-|cd/㎡|
|C.I.E. (White)|(X)<br>(Y)|C.I.E 1931|0.25<br>0.27|0.29<br>0.31|0.33<br>0.35||
|Dark Room Contrast|CR|-|-|>10000:1|-||
|Viewing angle range|-|-|-|Free|-|Degree|



* Optical measurement taken at VDD = 2.8V, VCC = 7.25V. 

## **Absolute Maximum rating** 

|**Item**|**Symbol**|**Min.**|**Typ.**|**Max.**|**Unit**|**Notes**|
|---|---|---|---|---|---|---|
|Supply Voltage for Logic|VDD|-0.3|-|4|Volt|1,2|
|Supply Voltage for Display|Vcc|0|-|11|Volt|1,2|
|Life Time (80 cd/㎡)||---|40,000|---|Hour|3|



Note 1: All the above voltages are on the basis of “VSS = 0V”. 

Note 2: When this module is used beyond the above absolute maximum ratings, permanent breakage of the module may occur. Also, for normal operations, it is desirable to use this module under the conditions according to Section 3. “Optics ”. If this module is used beyond these conditions, malfunctioning of the module can occur and the reliability of the module may deteriorate. 

Note 3: VCC = 7.25V, Ta = 25°C, 50% Checkerboard. 

## **AC Characteristics** 

please refer “SSD1306 specification. 

## **Actual Application Example** 

Command usage and explanation of an actual example 

## < Initialization> 

If the noise is accidentally occurred at the displaying window during the operation, please reset the display in order to recover the display function. 

<Power down Sequence> 

- <Entering Sleep Mode> 

<Exiting Sleep Mode>