MCOB200016AV-YP

**Sauls Wharf House Crittens Road Great Yarmouth Norfolk NR31 0AG** 

Telephone +44 (0)1493 602602 Email:sales@midasdisplays.com Email:tech@midasdisplays.com www.midasdisplays.com 

|MCOB200016AV-YP|MCOB200016AV-YP|200 x 16|200 x 16|OLED Module|
|---|---|---|---|---|
|**Specification **|||||
|Version:    1|||Date:  20/11/2016||
|**Revision**|||||
|1|17/11/2016||First Issue||



|DisplayFeatures|DisplayFeatures|||
|---|---|---|---|
|Resolution|200 x 16|||
|Appearance|Yellow on Black|||
|Logic Voltage|5V|||
|Interface|Parallel|||
|Module Size|182.00 x 38.50 x 9.30mm|||
|OperatingTemperature|-40°C ~ +80°C|BoxQuantity|Weight / Display|
|Construction|COB|---|---|



* - For full design functionality, please use this specification in conjunction with the MD0010 specification. (Provided Separately) 

|**Display Accessories**|**Display Accessories**||**Optional Variants**||
|---|---|---|---|---|
|**Part Number**|**Description**||**Appearance**|**Voltage**|



Page 1 of 16 

## **General Specification** 

The Features is described as follow: 

- Module dimension: 182.0 x 38.5 x 9.3 (MAX) mm 

- View area: 154.4 x 16.5 mm 

- Active area: 123.95 x 11.15 mm 

- Dot Matrix: 200*16 

- Dot size: 0.57 x 0.65 mm 

- Dot pitch: 0.62 x 0.70 mm 

- Duty: 1/16 

- Emitting Color: OLED , Yellow 

## **Interface Pin Function** 

|**Pin No. Symbol**|**Pin No. Symbol**|**Level**|**Description**|
|---|---|---|---|
|1|VSS|0V|Ground|
|2|VDD|5.0V|Supply Voltage for logic|
|3|NC|－||
|4|RS|H/L|H: DATA, L: Instruction code|
|5|R/W|H/L|H: Read(Module→MPU) L: Write(MPU→Module)|
|6|E|H,H→L|Chip enable signal|
|7|DB0|H/L|Data bit 0|
|8|DB1|H/L|Data bit 1|
|9|DB2|H/L|Data bit 2|
|10|DB3|H/L|Data bit 3|
|11|DB4|H/L|Data bit 4|
|12|DB5|H/L|Data bit 5|
|13|DB6|H/L|Data bit 6|
|14|DB7|H/L|Data bit 7|
|15|CS1|－|Chip1 select input pin|
|16|CS2|－|Chip2 select input pin|



Page 2 of 16 

## **Counter Drawing & Block Diagram** 

**==> picture [402 x 746] intentionally omitted <==**

**----- Start of picture text -----**<br>
38.5 0.5<br>23.7 9.9<br>16.5(VA) 13.5<br>11.15(AA) 15.825<br>3.50<br>a an<br>17.78 12.8<br>(P2.54*7)<br>0.70<br>0.65<br>[ 3! ge | !<br>26.5 8.5<br>H<br>Page 3 of 16<br>31.835 16.3 14.65<br>3.5<br>2 16<br>1 15<br>3.50<br>2.50<br>SCALE 1/1<br>PIN DETAIL 2.54<br>16- 1.8 PAD 16- 1.0 PTH<br>200*16<br>175.0 182.0 0.5<br>157.7<br>123.95(AA) 154.4(VA)<br> DOTS<br>SCALE 10/1 DOT SIZE<br>0.57 0.62<br>4- 5.5 PTH 4- 3.5 PTH<br>The non-specified tolerance of dimension is<br>1.6<br>0.3mm.<br>4.7<br>9.3MAX<br>16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1<br>CS2 CS1 DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 E R/W RS NC Vdd Vss<br>**----- End of picture text -----**<br>


Page 4 of 16 

## **Absolute Maximum Ratings** 

|**Item**|**Symbol**|**Min**|**Max**|**Unit**|**Notes**|
|---|---|---|---|---|---|
|Operating Temperature|TOP|-40|+80|℃||
|Storage Temperature|TST|-40|+80|℃||
|Supply Voltage For Logic|VDD-VSS|-0.3|5.3|V||



## **Electrical Characteristics** 

|**Item**|**Symbol**|**Condition**|**Min**|**Typ**|**Max**|**Unit**|
|---|---|---|---|---|---|---|
|Supply Voltage For Logic VDD-VSS|Supply Voltage For Logic VDD-VSS|－|4.8|5.0|5.3|V|
|Input High Volt.|VIH|－|0.8 VDD|－|VDD|V|
|Input Low Volt.|VIL|－|GND|－|0.2 VDD|V|
|Output High Volt.|VOH|IOH=-0.5mA 0.8 VDD|IOH=-0.5mA 0.8 VDD|－|VDD|V|
|Output Low Volt.|VOL|IOL=0.5mA|GND|－|0.2 VDD|V|
|50% Check Board<br>Operating Current|IDD|VDD=5V|42|50|60|mA|



Note: In order to avoid any possible damages, 3V or 3.3V logic I/O for VDD 5V OLED module is not recommended. 

Page 5 of 16 

## **Optical Characteristics** 

|**Item**|**Symbol**|**Condition**|**Min**|**Typ**|**Max**|**Unit**|
|---|---|---|---|---|---|---|
|View Angle|(V)θ|－|160|－|－|deg|
||(H)φ|－|160|－|－|deg|
|Contrast Ratio|CR|Dark|2000:1|－|－|－|
|Response Time|T rise|－|－|10|－|μs|
||T fall|－|－|10|－|μs|
|Display with 50% check Board Brightness|||70|90|－|cd/m2|
|CIEx(Yellow)||(CIE1931)|0.45|0.47|0.49|－|
|CIEy(Yellow)||(CIE1931)|0.48|0.50|0.52|－|



## **OLED Lifetime** 

|ITEM|Conditions|Min|Typ|Remark|
|---|---|---|---|---|
|Operating<br>Life Time|Ta=25℃<br>/ Initial 50% check Board<br>Typical Brightness Value|80,000<br>Hrs|100,000<br>Hrs|Note|



## Note: 

1. Life time is defined the amount of time when the luminance has decayed to <50% of the initial value. 

2. This analysis method uses life data obtained under accelerated conditions to extrapolate an estimated probability density function ( _pdf_ ) for the product under normal use conditions. 

3. Screen saving mode will extend OLED lifetime. 

Page 6 of 16 

## **Reliability** 

## **Content of Reliability Test** 

|**Content of Reliability Testy Test Test**|**Content of Reliability Testy Test Test**|**Content of Reliability Testy Test Test**|**Content of Reliability Testy Test Test**|
|---|---|---|---|
|**Environmental Test**<br>~~pe~~||||
|**Test Item**<br>~~a~~|**Content of Test**<br>~~ee~~|**Test Condition**<br>~~ee~~|**Applicable**<br>**Standard**<br>~~ee~~|
|High<br>Temperature<br>storage<br>~~a ee~~|Endurance test applying the high<br>storage temperature for a long time.<br>~~ee~~|240hrs<br>~~ee~~|——<br>~~ee~~|
|Low<br>Temperature<br>storage<br>~~a~~|Endurance test applying the low storage<br>temperature for a long time.<br>|Endurance test applying the low storage<br>240hrs<br>|——<br>|
|High<br>Temperature<br>Operation<br>~~ee~~<br>~~es~~|Endurance test applying the electric<br>stress (Voltage & Current) and the<br>thermal stress to the element for a long<br>time.<br>~~ee~~<br>|240hrs<br>~~ee~~<br>|——<br>~~ee~~<br>|
|Low<br>Temperature<br>Operation<br>~~es~~|Endurance test applying the electric<br>stress under low temperature for a long<br>time.<br>|240hrs<br>|——<br>|
|High<br>Temperature/<br>Humidity<br>Storage<br>~~esIIMs~~|Endurance test applying the high<br>temperature and high humidity storage<br>for a long time.<br>~~IIMs~~|240hrs<br>~~IIMs~~|——<br>~~IIMs~~|
|Temperature<br>Cycle|Endurance test applying the low and<br>high temperature cycle.<br>30min    5min     30min<br>1 cycle|100 cycles|——|
|Mechanical Test<br>~~pn~~<br>~~poeefen|~~<br>|pores<br>~~i~~||||
|Vibration test<br>~~poeefen~~<br>~~i~~|Endurance test applying the vibration<br>during transportation and using.<br>~~efen|~~<br>~~wanoraqross~~<br>|10~22Hz→1.5mmp-p<br>22~500Hz→1.5G<br>Total0.5hr<br>~~wanoraqross~~<br>|pores<br>|——<br>~~wanoraqross~~<br>pores<br>|
|Shock test<br>~~poeefen~~<br>~~i~~|Constructional and mechanical<br>endurance test applying the shock<br>during transportation.<br>~~efen |~~<br>|50G Half sin<br>wave 11 ms<br>3 times of each<br>direction<br>|pores<br>|——<br>pores<br>|
|Atmospheric<br>pressure test<br>~~po~~|Endurance test applying the<br>atmospheric pressure during<br>transportation byair.<br>~~po~~|115mbar<br>40hrs<br>~~po~~|——<br>~~po~~|
|Others<br>~~pe~~||||
|Static<br>electricity test|Endurance test applying the electric<br>stress to the terminal.|VS=±600V(contact),<br>±800v(air),<br>RS=330Ω<br>CS=150pF<br>10 times|——|



*** Supply voltage for OLED system =Operating voltage at 25℃ 

Page 7 of 16 

## **Test and measurement conditions** 

1. All measurements shall not be started until the specimens attain to temperature stability. After the completion of the described reliability test, the samples were left at room temperature for 2 hrs prior to conducting the failure test at 23±5°C; 55±15% RH. 

2. All-pixels-on is used as operation test pattern. 

3. The degradation of Polarizer are ignored for High Temperature storage, High Temperature/ Humidity Storage, Temperature Cycle 

## **Evaluation criteria** 

1. The function test is OK. 

2. No observable defects. 

3. Luminance: > 50% of initial value. 

4. Current consumption: within ± 50% of initial value. 

## **APPENDIX:** 

## **RESIDUE IMAGE** 

Because the pixels are lighted in different time, the luminance of active pixels may reduce or differ from inactive pixels. Therefore, the residue image will occur. To avoid the residue image, every pixel needs to be lighted up uniformly. 

Page 8 of 16 

## **Inspection specification** 

|NO<br>~~eG~~|Item<br>~~eG~~|Criterion<br>~~eG~~|AQL<br>~~eG~~|
|---|---|---|---|
|01|Electrical<br>Testing|1.1 Missing vertical, horizontal segment, segment contrast<br>defect.<br>1.2 Missing character , dot or icon.<br>1.3 Display malfunction.<br>1.4 No function or no display.<br>1.5 Current consumption exceeds product specifications.<br>1.6 OLED viewing angle defect.<br>1.7 Mixed product types.<br>1.8 Contrast defect.|0.65|
|02<br>~~i~~|Black or<br>white<br>spots on<br>OLED<br>(display<br>only)<br>~~i 2.1~~|three white or black spots present.<br>2.2 Densely spaced: No more than two spots or lines within<br>3mm.<br>~~2.1 White and blackspots on display 10.25mm, no more than~~|2.5<br>~~-~~|
|03<br>~~i~~|OLED<br>black<br>spots,<br>white<br>spots,<br>contamina<br>tion<br>(non-displ<br>ay)<br>~~i 2.1~~|3.1 Round type : As<br>following drawing<br>Φ=( x + y ) / 2<br>SIZE<br>Acceptable Q<br>TY<br>Φ≦0.10<br>Accept no<br>dense<br>0.10＜Φ≦0.20<br>2<br>0.20＜Φ≦0.25<br>1<br>0.25＜Φ<br>0<br>~~2.1 White and blackspots on display 10.25mm, no more than ~~|2.5<br> ~~-~~|
|||3.2 Line type : (As followingdrawing)<br>Length<br>Width<br>Acceptable Q TY<br>---<br>W≦0.02<br>Accept no dense<br>L≦3.0<br>0.02＜W≦0.03<br>2<br>L≦2.5<br>0.03＜W≦0.05<br>---<br>0.05＜W<br>As round type|2.5|
|04|Polarizer<br>bubbles|If bubbles are visible,<br>judge using black spot<br>specifications, not easy<br>to find, must check in<br>specify direction.<br>Size Φ<br>Acceptable Q TY<br>Φ≦0.20<br>Accept no dense<br>0.20＜Φ≦0.50<br>3<br>0.50＜Φ≦1.00<br>2<br>1.00＜Φ<br>0<br>TotalQTY<br>3<br>~~ee~~<br>~~ee~~<br>~~ee~~|2.5|



Page 9 of 16 

|NO<br>~~a~~|Item|Criterion|AQL|
|---|---|---|---|
|05<br>~~a~~|Scratches|Follow NO.3 OLED black spots, white spots, contamination||
|06|Chipped<br>glass|Symbols Define:<br>x: Chip length      y: Chip width     z: Chip thickness<br>k: Seal width       t: Glass thickness  a: OLED side length<br>L: Electrode pad length:<br>6.1 General glass chip :<br>6.1.1 Chip on panel surface and crack between panels:<br>z: Chip thickness<br>y: Chip width<br>x: Chip length<br>Z≦1/2t<br>Not over viewing<br>area<br>x≦1/8a<br>1/2t＜z≦2t<br>Not exceed 1/3k<br>x≦1/8a<br>☉If there are 2 or more chips, x is total length of each chip.<br>6.1.2 Corner crack:<br>z: Chip thickness<br>y: Chip width<br>x: Chip length<br>Z≦1/2t<br>Not over viewing<br>area<br>x≦1/8a<br>1/2t＜z≦2t<br>Not exceed 1/3k<br>x≦1/8a<br>☉If there are 2 or more chips, x is the total length of each chip.<br>,<br>K<br>SeN<br>2|2.5|



Page 10 of 16 

**==> picture [471 x 532] intentionally omitted <==**

**----- Start of picture text -----**<br>
ee NO Item  Criterion  AQL<br>Symbols :<br>x: Chip length      y: Chip width     z: Chip thickness<br>k: Seal width       t: Glass thickness  a: OLED side length<br>L: Electrode pad length<br>6.2 Protrusion over terminal :<br>6.2.1 Chip on electrode pad :<br>Z<br>y: Chip width  x: Chip length  z: Chip thickness<br>y≦0.5mm  x≦1/8a  0  ＜ z ≦ t<br>6.2.2 Non-conductive portion:<br>Li L<br>Glass<br>06  2.5<br>crack  nl pie Z yy eres z 7<br>A A<br>y: Chip width  x: Chip length  z: Chip<br>thickness<br>y≦ L  x≦1/8a  0  ＜ z ≦ t<br>☉If the chipped area touches the ITO terminal, over 2/3 of the ITO<br>must remain and be inspected according to electrode terminal<br>specifications.<br>☉If the product will be heat sealed by the customer, the alignment<br>mark not be damaged.<br>6.2.3 Substrate protuberance and internal crack.<br>x<br>y: width  x: length<br>y≦1/3L  x ≦ a<br>**----- End of picture text -----**<br>


Page 11 of 16 

|NO|Item|Criterion|AQL|
|---|---|---|---|
|07|Cracked<br>glass|The OLED with extensive crack is not acceptable.|2.5|
|08|Backlight<br>elements|8.1 Illumination source flickers when lit.<br>8.2 Spots or scratched that appear when lit must be judged.<br>Using OLED spot, lines and contamination standards.<br>8.3 Backlight doesn’t light or color wrong.|0.65<br>2.5<br>0.65|
|09|Bezel|9.1 Bezel may not have rust, be deformed or have<br>fingerprints, stains or other contamination.<br>9.2 Bezel must comply with job specifications.|2.5<br>0.65|
|10|PCB、COB|10.1 COB seal may not have pinholes larger than 0.2mm or<br>contamination.<br>10.2 COB seal surface may not have pinholes through to the<br>IC.<br>10.3 The height of the COB should not exceed the height<br>indicated in the assembly diagram.<br>10.4 There may not be more than 2mm of sealant outside the<br>seal area on the PCB. And there should be no more than<br>three places.<br>10.5 No oxidation or contamination PCB terminals.<br>10.6 Parts on PCB must be the same as on the production<br>characteristic chart. There should be no wrong parts,<br>missing parts or excess parts.<br>10.7 The jumper on the PCB should conform to the product<br>characteristic chart.<br>10.8 If solder gets on bezel tab pads, OLED pad, zebra pad<br>or screw hold pad, make sure it is smoothed down.|2.5<br>2.5<br>0.65<br>2.5<br>2.5<br>0.65<br>0.65<br>2.5|
|11|Soldering|11.1 No un-melted solder paste may be present on the PCB.<br>11.2 No cold solder joints, missing solder connections,<br>oxidation or icicle.<br>11.3 No residue or solder balls on PCB.<br>11.4 No short circuits in components on PCB.|2.5<br>2.5<br>2.5<br>0.65|



Page 12 of 16 

|NO|Item|Criterion|AQL|
|---|---|---|---|
|12|General<br>appearance|12.1 No oxidation, contamination, curves or, bends on<br>interface Pin (OLB) of TCP.<br>12.2 No cracks on interface pin (OLB) of TCP.<br>12.3 No contamination, solder residue or solder balls on<br>product.<br>12.4 The IC on the TCP may not be damaged, circuits.<br>12.5 The uppermost edge of the protective strip on the<br>interface pin must be present or look as if it cause the<br>interface pin to sever.<br>12.6 The residual rosin or tin oil of soldering (component or<br>chip component) is not burned into brown or black color.<br>12.7 Sealant on top of the ITO circuit has not hardened.<br>12.8 Pin type must match type in specification sheet.<br>12.9 OLED pin loose or missing pins.<br>12.10 Product packaging must the same as specified on<br>packaging specification sheet.<br>12.11 Product dimension and structure must conform to<br>product specification sheet.|2.5<br>0.65<br>2.5<br>2.5<br>2.5<br>2.5<br>2.5<br>0.65<br>0.65<br>0.65<br>0.65|



Page 13 of 16 

|**Check Item**|**Classification**|**Criteria**|
|---|---|---|
|No Display|Major||
|Missing Line|Major|r<br>|<br>f<br>|<br>j<br>i<br>fi|
|Pixel Short|Major|SERRE SERRE<br>CEEBRE a JS Se<br>{<br>4h|
|Darker Short|Major|ial<br>1<br>|<br>|<br>|<br>~~|~~<br>~~|~~<br>[<br>]|
|Wrong Display|Major|~~|~~<br>|<br>|<br>i<br>i<br>L<br>eer<br>ls eo|
|Un-uniform<br>B/A x 100% < 70%<br>A/C x 100% < 70%|Major|~~r~~<br>~~f~~<br>~~‘~~<br>~~|~~<br>~~7~~<br>|<br>{<br>k<br>Be<br>Peet<br>) EE |<br>A|Normal<br>| |<br>||<br>B<br>Dark Pixel<br>_ Fe)<br>scFa ieht Pixel<br>Pee<br>Be|



Page 14 of 16 

## **Precautions in use of OLED Modules** 

- (1) Avoid applying excessive shocks to module or making any alterations or modifications to it. 

- (2) Don’t make extra holes on the printed circuit board, modify its shape or change the components of OLED display module. 

- (3) Don’t disassemble the OLED display module. 

- (4) Don’t operate it above the absolute maximum rating. 

- (5) Don’t drop, bend or twist OLED display module. 

- (6) Soldering: only to the I/O terminals. 

- (7) Storage: please storage in anti-static electricity container and clean environment. 

- (8) It's pretty common to use "Screen Saver" to extend the lifetime and Don't use fix information for long time in real application. 

- (9) Don't use fixed information in OLED panel for long time, that will extend "screen burn" effect time.. 

- (10) Midas has the right to change the passive components, including R2and R3 adjust resistors.  (Resistors, capacitors and other passive components will have different appearance and color caused by the different supplier.) 

(11) Midas have the right to change the PCB Rev. (In order to satisfy the supplying stability, management optimization and the best product performance...etc, under the premise of not affecting the electrical characteristics and external dimensions, Midas have the right to modify the version.) 

## **1. Handling Precautions** 

- (1) Since the display panel is being made of glass, do not apply mechanical impacts such us dropping from a high position. 

- (2) If the display panel is broken by some accident and the internal organic substance leaks out, be careful not to inhale nor lick the organic substance. 

- (3) If pressure is applied to the display surface or its neighborhood of the OLED display module, the cell structure may be damaged and be careful not to apply pressure to these sections. 

- (4) The polarizer covering the surface of the OLED display module is soft and easily scratched. Please be careful when handling the OLED display module. 

- (5) When the surface of the polarizer of the OLED display module has soil, clean the surface. It takes advantage of by using following adhesion tape. 

- Scotch Mending Tape No. 810 or an equivalent 

Never try to breathe upon the soiled surface nor wipe the surface using cloth containing solvent Also, pay attention that the following liquid and solvent may spoil the polarizer: 

- Water 

- Ketone 

- Aromatic Solvents 

- (6) Hold OLED display module very carefully when placing OLED display module into the System housing. Do not apply excessive stress or pressure to OLED display module. And, do not over bend the film with electrode pattern layouts. These stresses will influence the 

display performance. Also, secure sufficient rigidity for the outer cases. 

Page 15 of 16 

- (7) Do not apply stress to the LSI chips and the surrounding molded sections. 

- (8) Do not disassemble nor modify the OLED display module. 

- (9) Do not apply input signals while the logic power is off. 

- (10) Pay sufficient attention to the working environments when handing OLED display modules to prevent occurrence of element breakage accidents by static electricity. 

- Be sure to make human body grounding when handling OLED display modules. 

- Be sure to ground tools to use or assembly such as soldering irons. 

- To suppress generation of static electricity, avoid carrying out assembly work under dry environments. 

- Protective film is being applied to the surface of the display panel of the OLED display 

- module. Be careful since static electricity may be generated when exfoliating the protective film. 

- (11) Protection film is being applied to the surface of the display panel and removes the protection film before assembling it. At this time, if the OLED display module has been stored surface of the display panel after removed of the film. In such case, remove the residue material by the method introduced in the above Section 5. 

- (12) If electric current is applied when the OLED display module is being dewed or when it is placed under high humidity environments, the electrodes may be corroded and be careful to avoid the above. 

## **2. Storage Precautions** 

- (1) When storing OLED display modules, put them in static electricity preventive bags avoiding exposure to direct sun light nor to lights of fluorescent lamps. And, also, avoiding high temperature and high humidity environment or low temperature (less than 0°C) environments.(We recommend you to store these modules in the packaged state when they were shipped from Midas Displays. At that time, be careful not to let water drops adhere to the packages or bags nor let dewing occur with them. 

- (2) If electric current is applied when water drops are adhering to the surface of the OLED display module, when the OLED display module is being dewed or when it is placed under high humidity environments, the electrodes may be corroded and be careful about the above. 

## **3. Designing Precautions** 

- (1) The absolute maximum ratings are the ratings which cannot be exceeded for OLED display module, and if these values are exceeded, panel damage may be happen. 

- (2) To prevent occurrence of malfunctioning by noise, pay attention to satisfy the VIL and VIH specifications and, at the same time, to make the signal line cable as short as possible. 

- (3) We recommend you to install excess current preventive unit (fuses, etc.) to the power circuit (VDD). (Recommend value: 0.5A) 

- (4) Pay sufficient attention to avoid occurrence of mutual noise interference with the neighboring devices. 

- (5) As for EMI, take necessary measures on the equipment side basically. 

- (6) When fastening the OLED display module, fasten the external plastic housing section. 

- (7) If power supply to the OLED display module is forcibly shut down by such errors as taking out the main battery while the OLED display panel is in operation, we cannot guarantee the quality of this OLED display module. Connection (contact) to any other potential than the above may lead to rupture of the IC. 

Page 16 of 16