MC002240

**PCB Mount Solid State Relay Single Phase AC Output** 

Compliant **Description** This is printed board mounted solid state relay. Suitable for important industrial applications such as the control of the electromagnetic valve, motor, incandescent lamp. Control voltage is 12V DC, RoHS opto-isolation between input and output, the output is zero crossing and random on. 

## **Features** 

- Opto-isolation 

- Load Current: 0.1A-2A @24-280V AC 

- Control Voltage: 12V DC 

- Dielectric Strength: 2500VACrms 

- TRIAC Output 

- PCB Mounted 

## **Application** 

Suitable for the control of electromagnetic valve, motor and incandescent lamp. 

## **Technical Specification** 

|**Technical Specification**|**Technical Specification**|**Technical Specification**|
|---|---|---|
|**Input Circuit**|||
|Control Voltage Range|12V DC|9.6 - 14.4V DC|
|Must Turn-on Voltage||9.6V DC|
|Must Turn-off Voltage||1V DC|
|Maximum Input Current||25mA|
|**Output Circuit**|||
|Load Voltage Range||24-280V AC|
|Transient Over voltage||600Vpk|
|Maximum Surge Current[@10 ms]|2A|35A|
|Maximum Turn-on Time|Random-On|1ms|
||Zero Crossing|10ms|
|Maximum Turn-off Time||10ms|
|Load Current Range|2A|0.1 ~ 2A|
|Maximum Off-state Leakage<br>Current[@Rated Voltage]||1.5mA|
|Maximum On-state Voltage<br>Drop [@Rated Current]||1.5Vrms|
|Minimum Off-state dv/dt<br>[@Maximum Rated Voltage]||200V/μs|
|**General Information**|||
|Dielectric Strength,<br>Input/Output[50/60Hz]||2500V ACrms|
|Insulation Resistance||1000MΩ(@500V DC)|



Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro 

Page <1> 28/04/20 V1.0 

## **PCB Mount Solid State Relay Single Phase AC Output** 

|Ambient OperatingTemperature Range|-30°C ~ +80°C|
|---|---|
|Ambient Storage|-30°C ~ +100°C|
|Weight[Typical]|3g|



## **Installation Drawing** 

## **T Type Footprint** 

## **Wiring Diagram** 

1.80.3 Dimensions : Millimetres 

## **Thermal Curve** 

## **Part Number Table** 

|**Part Number Table**||
|---|---|
|**Description**|**Part Number**|
|SSR, PCB Mount, 2A, 240V AC, 12V DC, Zero Crossing, T Footprint|rint<br>MC002239|
|SSR, PCB Mount, 2A, 240V AC, 12V DC, Random Turn On, T Footprint|rint<br>MC002240|



**Important Notice :** This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. 

Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro 

28/04/20 V1.0 

Page <2>