MAL219691214E3

Supercapacitor, ENYCAP™, 15 F, 5.6 V, Radial Leaded, -20%, +80%, 11 mm, 1000 hours @ 85°C

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: VISHAY
Product type: EDLC - Electric Double Layer Capacitors
Capacitance:15F; Voltage Rating:5.6V; Capacitor Terminals:Radial Leaded; Product Range:VISHAY - 196 HVC ENYCAP Series; Capacitance Tolerance:+80%, -; Available until stocks are exhausted
ESR: 10ohm
SVHC: No SVHC (25-Jun-2025)
Capacitance: 15F
Voltage(DC): 5.6V
Lead Spacing: 11mm
Product Range: ENYCAP 196 HVC Series
Product Width: -
Qualification: -
Product Height: 10mm
Product Length: 10mm
Product Diameter: 12mm
Capacitor Mounting: Through Hole
Capacitor Terminals: Radial Leaded
Capacitance Tolerance: -20%, +80%
Lifetime @ Temperature: 1000 hours @ 85°C
Capacitor Case / Package: Can
Operating Temperature Max: 85°C
Operating Temperature Min: -20°C
Delivery and price
Units per pack	200
Price	5.5 €
Current stock	200+
Lead time	30 days
Datasheet
_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

**196 HVC ENYCAP™** 

www.vishay.com 

Vishay BCcomponents 

## **Hybrid Energy Storage Capacitors** 

## **FEATURES** 

- Polarized energy storage capacitor with high capacity and energy density 

- Voltage flexibility: 1.4 V (single cell) to 2.8 V / 4.2 V / 5.6 V / 7.0 V / 8.4 V (multiple cells) 

- Available in stacked through-hole (STH, radial), surface-mount flat (SMF) and lay flat configurations (LFC) with wire and connectors 

- Useful life: up to 2000 h at 85 °C 

- No cell balancing necessary 

- Soft and low transient-voltage-controlled charging characteristic 

- Non-hazardous electrolyte 

- Maintenance-free, no service necessary 

- Evaluation kits for engineering are available under ordering code: MAL219699001E3 

- UL 810A recognized 

- Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 

## **APPLICATIONS** 

- Power backup for memory controller, flash backup, RAID systems, SRAM, DRAM 

- Power failure and write cache protection for enterprise SSD and HDD 

- Real time clock power source 

- Burst power support for flash lights, wireless transmitters 

- Backup power for industrial PC’s and industrial controls 

- Storage device for energy harvesting 

- Emergency light and micro UPS power source 

Image is not to scale 

## **MARKING** 

The capacitors are marked with the following information: 

- Rated capacitance (in F) 

- Rated voltage (in V) 

- Date code 

- Negative / positive terminal identification 

## **PACKAGING** 

Supplied in ESD trays only 

Revision: 16-Dec-2024 

Document Number: 28409 

**1** 

For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

## **196 HVC ENYCAP™** 

www.vishay.com 

## Vishay BCcomponents 

|**QUICK REFERENCE DATA**|**QUICK REFERENCE DATA**|**QUICK REFERENCE DATA**|**QUICK REFERENCE DATA**|**QUICK REFERENCE DATA**|**QUICK REFERENCE DATA**|**QUICK REFERENCE DATA**|
|---|---|---|---|---|---|---|
|**DESCRIPTION**|**VALUE**||||||
||**SINGLE CELL**|**2 CELLS**|**3 CELLS**|**4 CELLS**|**5 CELLS**|**6 CELLS**|
|Nominal case size<br>(Ø D x L in mm)<br>Stacked Through-Hole(STH)|7 x 2.5<br>12 x 2.5<br>35 x 25 x 5|7 x 5<br>12 x 5<br>35 x 25 x 7.5|7 x 7.5<br>12 x 7.5<br>35 x 25 x 10|7 x 10<br>12 x 10<br>35 x 25 x 15|7 x 12.5<br>12 x 12.5<br>35 x 25 x 17.5|7 x 15<br>12 x 15<br>35 x 25 x 20|
|Nominal case size<br>(Ø W x L x H in mm)<br>Surface-Mount Flat(SMF)|7 x 7 x 2.5<br>12 x 12 x 2.5<br>-|7 x 14 x 2.5<br>12 x 24 x 2.5<br>-|13 x 14 x 2.5<br>22 x 24 x 2.5<br>-|14 x 14 x 2.5<br>24 x 24 x 2.5<br>-|-|-|
|Nominal case size<br>(W x L x H in mm)<br>LayFlat(LFC)|14.5 x 12 x 2.5|14.5 x 24 x 2.5|14.5 x 36 x 2.5|14.5 x 48 x 2.5|14.5 x 60 x 2.5|14.5 x 72 x 2.5|
|Rated capacitance range, CR|4.0 F<br>15.0 F<br>90.0 F|4.0 F<br>15.0 F<br>90.0 F|4.0 F<br>15.0 F<br>90.0 F|4.0 F<br>15.0 F<br>90.0 F|4.0 F<br>15.0 F<br>90.0 F|4.0 F<br>15.0 F<br>90.0 F|
|Tolerance on CRat 20 °C|-20 % to +80 %||||||
|Rated voltage, UR|1.4 V|2.8 V|4.2 V|5.6 V|7.0 V|8.4 V|
|Maximum surge voltage,<br>US(max. 30 s)|1.6 V|3.2 V|4.8 V|6.4 V|8.0 V|9.6 V|
|Minimum stored energy|4 Ws<br>17 Ws<br>115 Ws|9 Ws<br>35 Ws<br>230 Ws|13 Ws<br>52 Ws<br>345 Ws|18 Ws<br>70 Ws<br>460 Ws|22 Ws<br>87 Ws<br>575 Ws|27 Ws<br>105 Ws<br>690 Ws|
|Energydensity|9 Ws/gto 13 Ws/g||||||
|Category temperature range|4.0 F: -20 °C to +70 °C||||||
||15.0 F / 90.0 F: -20 °C to +85 °C||||||
|Storage temperature range|-40 °C to +85 °C||||||
|Useful life at UR|4.0 F||15.0 F||90.0 F||
||at 70 °C: 1000 h<br>at 55 °C: 2800 h<br>at 45 °C: 5600 h||at 85 °C: 1000 h<br>at 70 °C: 2800 h<br>at 60 °C: 5600 h||at 85 °C: 2000 h<br>at 70 °C: 5600 h<br>at 60 °C: 11 200 h||
|Shelf life|1000 h at upper categorytemperature||||||
|Climatic categoryIEC 60068|25 / 085 / 21||||||



|**SELECTION CHART FOR CR, UR, AND FORM AT UPPER CATEGORY TEMPERATURE(UCT)**|**SELECTION CHART FOR CR, UR, AND FORM AT UPPER CATEGORY TEMPERATURE(UCT)**|**SELECTION CHART FOR CR, UR, AND FORM AT UPPER CATEGORY TEMPERATURE(UCT)**|**SELECTION CHART FOR CR, UR, AND FORM AT UPPER CATEGORY TEMPERATURE(UCT)**|**SELECTION CHART FOR CR, UR, AND FORM AT UPPER CATEGORY TEMPERATURE(UCT)**|**SELECTION CHART FOR CR, UR, AND FORM AT UPPER CATEGORY TEMPERATURE(UCT)**|**SELECTION CHART FOR CR, UR, AND FORM AT UPPER CATEGORY TEMPERATURE(UCT)**|**SELECTION CHART FOR CR, UR, AND FORM AT UPPER CATEGORY TEMPERATURE(UCT)**|
|---|---|---|---|---|---|---|---|
|**CR**<br>**(F)**|**FORM**|**UR (V)**||||||
|||**1.4**|**2.8**|**4.2**|**5.6**|**7.0**|**8.4**|
|4|A2|7.0 x 2.5|7.0 x 5.0|7.0 x 7.5|7.0 x 10.0|7.0 x 12.5|7.0 x 15.0|
||B2|7.0 x 2.5|7.0 x 5.0|7.0 x 7.5|7.0 x 10.0|7.0 x 12.5|7.0 x 15.0|
||B3|||||||
||C|7.0 x 7.0 x 2.5|-|-|-|-|-|
||D|7.0 x 7.0 x 2.5|-|-|-|-|-|
||E|-|7.0 x 14.0 x 2.5|13.0 x 14.0 x 2.5|14.0 x 14.0 x 2.5|-|-|
|15|A2|12.0 x 2.5|12.0 x 5.0|12.0 x 7.5|12.0 x 10.0|12.0 x 12.5|12.0 x 15.0|
||B2|12.0 x 2.5|12.0 x 5.0|12.0 x 7.5|12.0 x 10.0|12.0 x 12.5|12.0 x 15.0|
||B3|||||||
||C|12.0 x 12.0 x 2.5|-|-|-|-|-|
||D|12.0 x 12.0 x 2.5|-|-|-|-|-|
||E|-|12.0 x 24.0 x 2.5|22.0 x 24.0 x 2.5|24.0 x 24.0 x 2.5|-|-|
||F|14.5 x 12.0 x 2.5|14.5 x 24.0 x 2.5|14.5 x 36.0 x 2.5|14.5 x 48.0 x 2.5|14.5 x 60.0 x 2.5|14.5 x 72.0 x 2.5|
|90|G|35 x 25 x 5|35 x 25 x 7.5|35 x 25 x 10|35 x 25 x 15|35 x 25 x 17.5|35 x 25 x 20|
||H|||||||



Revision: 16-Dec-2024 

Document Number: 28409 

**2** 

For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

**196 HVC ENYCAP™** 

www.vishay.com 

Vishay BCcomponents 

## **DIMENSIONS** in millimeters **AND AVAILABLE FORMS** 

## **STACKED THROUGH HOLE CONFIGURATION (STH): Examples VERTICAL MOUNT** 

**==> picture [277 x 259] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ø Dmax.<br>- -<br>Lmax.<br>   6       (2 x)+ 0.5- 0.5 +<br>+ -<br>Ø 0.8 Ø 0.64<br>F<br>i [en]<br> Fig. 1 -  Form A2:  Stacked Through Hole (example 4 cells, 2 pins)  [(1)]<br>Ø Dmax. Lmax.<br>+ -<br>3.5       (2 x)+ 0.5- 0.5<br>. aid bE ©<br>F<br>Ø 0.64<br>**----- End of picture text -----**<br>


## **STACKED THROUGH HOLE CONFIGURATION (STH): Examples HORIZONTAL MOUNT** 

Fig. 2 - **Form B2:** Stacked Through Hole (example 5 cells, 2 pins)[(1)] 

**==> picture [241 x 111] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ø Dmax. Lmax.<br>+ -<br>i W r hk) 3.5       (3 x)+ 0.5- 0.5<br>Ø 0.64 (3 x) F<br>F1<br>+ | L_.|<br>**----- End of picture text -----**<br>


Fig. 3 - **Form B3:** Stacked Through Hole (example 4 cells, keyed polarity - 3 pins)[(1)] 

**Note** 

> (1) Bottom and top are not isolated 

## **SURFACE MOUNT FLAT CONFIGURATION (SMF): Examples** 

**==> picture [348 x 95] intentionally omitted <==**

**----- Start of picture text -----**<br>
Lmax.<br>- 1<br>3.8 max. + 0.1 (2 x) Ø Dmax. 3 (2 x)<br>+ 0.5 0.5 (2 x) + 0.5<br>4       (2 x)- 0.5 a 3.5       (2 x)- 0.5<br>Fig. 4 -  Form C:  Surface Mount Flat (single cell, keyed polarity)<br>**----- End of picture text -----**<br>


Document Number: 28409 

Revision: 16-Dec-2024 

**3** 

For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

**196 HVC ENYCAP™** 

**==> picture [502 x 648] intentionally omitted <==**

**----- Start of picture text -----**<br>
Vv www.vishay.com Vishay BCcomponents<br>_ R1.5<br>(inner radius) 0 .75 (2 x)<br>0.5 Ø 7.5 max. 3 [+0.5] -0.5<br>+<br>1.35<br>8.9       (2 x)+0.5-0.5<br>Fig. 5 -  Form D1:  Surface Mount Flat (single cell, keyed polarity)<br>0.1 (2 x)<br>-<br>2.8 max. Ø 12.5 max. 3 [+ 0.5] - 0.5<br>+ 3.5 [+ 0.2] - 0.2<br>= an Ø Dmax. San 1.0 (2 x)<br>Fig. 6 -  Form D2:  Surface Mount Flat (single cell, keyed polarity)<br>0.5 (2 x)<br>1 (2 x)<br>+ Ø Dmax. 3 (2 x) 3.8 max.<br>0.1 (2 x)<br>-<br>moa + 0.5 [aQ@=<br>4       (2 x)- 0.5<br>Fig. 7 -  Form E2:  Surface Mount Flat<br>+ - 3 (2 x)<br>0.1 (2 x)<br>3.8 max. Hmax.<br>0.5 (2 x)<br>1 (2 x)<br>4 ± 1 (2 x)<br>Lmax.<br>Fig. 8 -  Form E3:  Surface Mount Flat<br>3 (2 x)<br>1 (2 x)<br>+ 3.8 max. Hmax.<br>-<br>0.5 (2 x)<br>4      (2 x)+ 1- 1 0.1 (2 x)<br>Lmax.<br>Fig. 9 -  Form E4:  Surface Mount Flat<br>0.1 (2 x)<br>2.8 max.<br>(including tags thickness)<br>**----- End of picture text -----**<br>


Vishay BCcomponents 

Revision: 16-Dec-2024 

Document Number: 28409 

**4** 

For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

## **196 HVC ENYCAP™** 

www.vishay.com 

Vishay BCcomponents 

## **LAY FLAT CONFIGURATION (LFC) WITH CONNECTOR: Example 5 cells in series** 

**==> picture [472 x 464] intentionally omitted <==**

**----- Start of picture text -----**<br>
Red (AWG 28, UL 1061) + Pin 1: red<br>Ø Dmax.<br>Black (AWG 28, UL 1061) - Pin 2: black<br>Molex connector;<br>Housing: 51146-0200<br>Terminal: 50641-8041<br>3.5 max.<br>Lmax. 50 [+ 5] - 5<br>Fig. 10 -  Form F:  Lay Flat (example for 5 cells)<br>35 max.<br>-<br>Lmax. 25 max. - +<br>+ 1       (2 x)+ 0.5- 0.5<br>4 (3 x)<br>0.25 (2 x)<br>F1 F<br>an oe := — —<br>Fig. 11 -  Form G:  Stacked Through Hole Oval (PCBD)<br>35 max.<br>0.5<br>—a_<br>Lmax.<br>+ -<br>5 + 0.5- 0.5 1 (3 x) 0.2 (2 x)<br>TE F1 im F<br>+ 0.5 - 0.5<br>4        (2 x)<br>**----- End of picture text -----**<br>


Fig. 12 - **Form H:** Stacked Through Hole Oval Horizontal 

Revision: 16-Dec-2024 

Document Number: 28409 

**5** 

For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

## **196 HVC ENYCAP™** 

www.vishay.com 

## Vishay BCcomponents 

**Table 1** 

## **DIMENSIONS** in millimeters, **MASS AND PACKAGING QUANTITIES** 

|**DIMENSIONS**in millimeters,**MASS AND PACKAGING QUANTITIES**|**DIMENSIONS**in millimeters,**MASS AND PACKAGING QUANTITIES**|**DIMENSIONS**in millimeters,**MASS AND PACKAGING QUANTITIES**|**DIMENSIONS**in millimeters,**MASS AND PACKAGING QUANTITIES**|**DIMENSIONS**in millimeters,**MASS AND PACKAGING QUANTITIES**|**DIMENSIONS**in millimeters,**MASS AND PACKAGING QUANTITIES**|**DIMENSIONS**in millimeters,**MASS AND PACKAGING QUANTITIES**|
|---|---|---|---|---|---|---|
|**NOMINAL CASE SIZE**<br>**D x L x H (mm)**|**FORM**|**Ø Dmax.**|**Lmax.**|**L1max.(1)**|**Hmax.**|**MASS**<br>**(g)**|
|7.0 x 7.0 x 2.5|A2, B2, B3|7.5|2.6|2.6 ± 0.5|-|0.5|
|7.0 x 7.0 x 2.5|C|7.5|7.0|7.0 + 8.0|-|0.5|
|7.0 x 7.0 x 2.5|D1|7.5|7.0|7.0 + 4.0|-|0.5|
|7.0 x 7.0 x 5.0|A2, B2, B3|7.5|5.0|5.0 ± 0.5|-|0.8|
|7.0 x 7.0 x 7.5|A2, B2, B3|7.5|7.5|7.5 ± 0.5|-|1.5|
|7.0 x 7.0 x 10.0|A2, B2, B3|7.5|10.0|10.0 ± 0.5|-|1.8|
|7.0 x 7.0 x 12.5|A2, B2, B3|7.5|12.0|12.0 ± 0.5|-|2.5|
|7.0 x 7.0 x 15.0|A2, B2, B3|7.5|16.0|16.0 ± 0.5|-|3.0|
|12.0 x 12.0 x 2.5|A2, B2, B3|12.5|2.8|2.8 ± 0.5|-|1.2|
|12.0 x 12.0 x 2.5|C|12.5|12.5|12.5 + 8.0|-|1.0|
|12.0 x 12.0 x 2.5|D2|12.5|12.5|12.5 + 4.0|-|1.0|
|12.0 x 12.0 x 5.0|A2, B2, B3|12.5|5.0|5.0 ± 0.5|-|2.2|
|12.0 x 12.0 x 7.5|A2, B2, B3|12.5|7.5|7.5 ± 0.5|-|3.3|
|12.0 x 12.0 x 10.0|A2, B2, B3|12.5|10.0|10.0 ± 0.5|-|4.0|
|12.0 x 12.0 x 12.5|A2, B2, B3|12.5|12.5|12.5 ± 0.5|-|5.4|
|12.0 x 12.0 x 15.0|A2, B2, B3|12.5|15.0|15.0 ± 0.5|-|6.5|
|7.0 x 14.0 x 2.5|E2|7.5|15.0|15.0 + 10.0|-|1.0|
|12.0 x 24.0 x 2.5|E2|12.5|24.0|24.0 + 10.0|-|2.0|
|13.0 x 14.0 x 2.5|E3|14.0|15.0|15.0 + 10.0|14.0|1.2|
|22.0 x 24.0 x 2.5|E3|24.0|24.0|24.0 + 10.0|22.5|3.3|
|14.0 x 14.0 x 2.5|E4|15.0|15.0|15.0 + 10.0|15.0|1.5|
|24.0 x 24.0 x 2.5|E4|24.0|24.0|24.0 + 10.0|24.0|4.4|
|14.5 x 12.0 x 2.5|F|14.5|12.0|12.0 + 50.0|-|1.0|
|14.5 x 24.0 x 2.5|F|14.5|24.0|24.0 + 50.0|-|3.0|
|14.5 x 36.0 x 2.5|F|14.5|36.0|36.0 + 50.0|-|4.0|
|14.5 x 48.0 x 2.5|F|14.5|48.0|48.0 + 50.0|-|6.0|
|14.5 x 60.0 x 2.5|F|14.5|60.0|60.0 + 50.0|-|7.5|
|14.5 x 72.0 x 2.5|F|14.5|72.0|72.0 + 50.0|-|9.0|
|35 x 25 x 5.0|G, H|35 x 25|3.6|3.6 ± 1.0|-|7.5|
|35 x 25 x 7.5|G, H|35 x 25|6.8|6.8 ± 1.0|-|15.0|
|35 x 25 x 10.0|G, H|35 x 25|10.0|10.0 ± 1.0|-|22.5|
|35 x 25 x 15.0|G, H|35 x 25|13.0|13.0 ± 1.0|-|30.0|
|35 x 25 x 17.5|G, H|35 x 25|16.8|16.8 ± 1.0|-|45.0|
|35 x 25 x 20.0|G, H|35 x 25|20.1|20.1 ± 1.0|-|50.0|



## **Note** 

> (1) L1max. includes tags 

Revision: 16-Dec-2024 

Document Number: 28409 

**6** 

For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

**196 HVC ENYCAP™** 

www.vishay.com 

## Vishay BCcomponents 

|**ELECTRICAL DATA**|**ELECTRICAL DATA**|
|---|---|
|**SYMBOL**|**DESCRIPTION**|
|CR|Rated capacitance, tolerance -20 % / +80 %,<br>measured byconstant current discharge method|
|UCT|Upper categorytemperature|
|IL|Max. leakage current after 24 h at UR|
|RI|Max. internal resistance at 1 kHz|



## **ORDERING EXAMPLE** 

Hybrid Storage Capacitor 15 F / 1.4 V 

Nominal case size: Ø 12.0 mm x 2.5 mm; Form B3 Ordering code: MAL219691211E3 

## **Note** 

- Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa and RH = 45 % to 75 % 

## **Table 2** 

|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|**UR**<br>**(V)**|**CR**<br>**(F)**|**NOMINAL**<br>**CASE SIZE**<br>**Ø D x L**<br>**D x L x H**<br>**(mm)**|**CASE**<br>**CODE **|**FORM**|**F**<br>**(mm)**|**F1**<br>**(mm)**|**UCT**<br>**(°C)**|**IL**<br>**24 h**<br>**(mA)**|**ESR**<br>**AC(1)**<br>**1 kHz**<br>**(**Ω**)**|**ESR**<br>**DC(2)**<br>**(**Ω**)**|**MIN.**<br>**STORAGE**<br>**ENERGY**<br>**(Ws)**|**PACKAGING**<br>**QUANTITIES**|**ORDERING CODE**|
|**STACKED THROUGH HOLE CONFIGURATION(STH) - VERTICAL MOUNT**||||||||||||||
|1.4|4|7.0 x 2.5|2pin|A2|7.5|-|70|0.03|2.5|7.5|4.6|80|MAL219691101E3|
|2.8|4|7.0 x 5.0|2pin|A2|7.5|-|70|0.03|5.0|15.0|9.2|80|MAL219691102E3|
|4.2|4|7.0 x 7.5|2pin|A2|7.5|-|70|0.03|7.5|22.5|13.8|80|MAL219691103E3|
|5.6|4|7.0 x 10.0|2pin|A2|7.5|-|70|0.03|10.0|30.0|18.4|80|MAL219691104E3|
|7.0|4|7.0 x 12.5|2pin|A2|7.5|-|70|0.03|12.5|37.5|23.0|84|MAL219691105E3|
|8.4|4|7.0 x 15.0|2pin|A2|7.5|-|70|0.03|15.0|45.0|27.6|84|MAL219691106E3|
|1.4|15|12.0 x 2.5|2pin|A2|12.5|-|85|0.12|0.6|2.5|17.5|80|MAL219691201E3|
|2.8|15|12.0 x 5.0|2pin|A2|12.5|-|85|0.12|1.2|5.0|35.0|80|MAL219691202E3|
|4.2|15|12.0 x 7.5|2pin|A2|12.5|-|85|0.12|1.8|7.5|52.5|80|MAL219691203E3|
|5.6|15|12.0 x 10.0|2pin|A2|12.5|-|85|0.12|2.4|10.0|70.0|80|MAL219691204E3|
|7.0|15|12.0 x 12.5|2pin|A2|12.5|-|85|0.12|3.0|12.5|87.5|90|MAL219691205E3|
|8.4|15|12.0 x 15.0|2pin|A2|12.5|-|85|0.12|3.6|15.0|105.0|90|MAL219691206E3|
|**STACKED THROUGH HOLE CONFIGURATION(STH) - HORIZONTAL MOUNT**||||||||||||||
|1.4|4|7.0 x 2.5|2pin|B2|3.2|-|70|0.03|2.5|7.5|4.6|100|MAL219691121E3|
|2.8|4|7.0 x 5.0|2pin|B2|5.4|-|70|0.03|5.0|15.0|9.2|100|MAL219691122E3|
|4.2|4|7.0 x 7.5|2pin|B2|7.5|-|70|0.03|7.5|22.5|13.8|96|MAL219691123E3|
|5.6|4|7.0 x 10.0|2pin|B2|8.8|-|70|0.03|10.0|30.0|18.4|96|MAL219691124E3|
|7.0|4|7.0 x 12.5|2pin|B2|12|-|70|0.03|12.5|37.5|23.0|60|MAL219691125E3|
|8.4|4|7.0 x 15.0|2pin|B2|14.5|-|70|0.03|15.0|45.0|27.6|60|MAL219691126E3|
|1.4|15|12.0 x 2.5|2pin|B2|3.2|-|85|0.12|0.6|2.5|17.5|100|MAL219691221E3|
|2.8|15|12.0 x 5.0|2pin|B2|5.8|-|85|0.12|1.2|5.0|35.0|100|MAL219691222E3|
|4.2|15|12.0 x 7.5|2pin|B2|8.3|-|85|0.12|1.8|7.5|52.5|80|MAL219691223E3|
|5.6|15|12.0 x 10.0|2pin|B2|11.0|-|85|0.12|2.4|10.0|70.0|90|MAL219691224E3|
|7.0|15|12.0 x 12.5|2pin|B2|13.4|-|85|0.12|3.0|12.5|87.5|40|MAL219691225E3|
|8.4|15|12.0 x 15.0|2pin|B2|15.7|-|85|0.12|3.6|15.0|105.0|40|MAL219691226E3|
|1.4|4|7.0 x 2.5|3pin|B3|2.8|2.5|70|0.03|2.5|7.5|4.6|100|MAL219691111E3|
|2.8|4|7.0 x 5.0|3pin|B3|5.1|2.5|70|0.03|5.0|15.0|9.2|100|MAL219691112E3|
|4.2|4|7.0 x 7.5|3pin|B3|7.5|2.5|70|0.03|7.5|22.5|13.8|96|MAL219691113E3|
|5.6|4|7.0 x 10.0|3pin|B3|10.0|2.5|70|0.03|10.0|30.0|18.4|96|MAL219691114E3|
|7.0|4|7.0 x 12.5|3pin|B3|12.0|2.5|70|0.03|12.5|37.5|23.0|60|MAL219691115E3|
|8.4|4|7.0 x 15.0|3pin|B3|14.5|2.5|70|0.03|15.0|45.0|27.6|60|MAL219691116E3|
|1.4|15|12.0 x 2.5|3pin|B3|3.2|5.0|85|0.12|0.6|2.5|17.5|100|MAL219691211E3|
|2.8|15|12.0 x 5.0|3pin|B3|5.8|5.0|85|0.12|1.2|5.0|35.0|100|MAL219691212E3|
|4.2|15|12.0 x 7.5|3pin|B3|8.0|5.0|85|0.12|1.8|7.5|52.5|80|MAL219691213E3|
|5.6|15|12.0 x 10.0|3pin|B3|11.0|5.0|85|0.12|2.4|10.0|70.0|90|MAL219691214E3|
|7.0|15|12.0 x 12.5|3pin|B3|13.0|5.0|85|0.12|3.0|12.5|87.5|40|MAL219691215E3|
|8.4|15|12.0 x 15.0|3pin|B3|16.0|5.0|85|0.12|3.6|15.0|105.0|40|MAL219691216E3|



Revision: 16-Dec-2024 

Document Number: 28409 

**7** 

For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

## **196 HVC ENYCAP™** 

www.vishay.com 

## Vishay BCcomponents 

|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|**ELECTRICAL DATA AND ORDERING INFORMATION**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|**UR**<br>**(V)**|**CR**<br>**(F)**|**NOMINAL**<br>**CASE SIZE**<br>**Ø D x L**<br>**D x L x H**<br>**(mm)**|**CASE**<br>**CODE **|**FORM**|**F**<br>**(mm)**|**F1**<br>**(mm)**|**UCT**<br>**(°C)**|**IL**<br>**24 h**<br>**(mA)**|**ESR**<br>**AC(1)**<br>**1 kHz**<br>**(**Ω**)**|**ESR**<br>**DC(2)**<br>**(**Ω**)**|**MIN.**<br>**STORAGE**<br>**ENERGY**<br>**(Ws)**|**PACKAGING**<br>**QUANTITIES**|**ORDERING CODE**|
|**SURFACE MOUNT FLAT CONFIGURATION (SMF)**||||||||||||||
|1.4|4|7.0 x 7.0 x 2.5|2 pin|C|-|-|70|0.03|2.5|7.5|4.6|50|MAL219691131E3|
|1.4|15|12.0 x 12.0 x 2.5|2 pin|C|-|-|85|0.12|0.6|2.5|17.5|100|MAL219691231E3|
|1.4|4|7.0 x 7.0 x 2.5|2 pin|D1|-|-|70|0.03|2.5|7.5|4.6|50|MAL219691141E3|
|1.4|15|12.0 x 12.0 x 2.5|2 pin|D2|-|-|85|0.12|0.6|2.5|17.5|100|MAL219691241E3|
|2.8|4|7.0 x 14.0 x 2.5|2 pin|E2|-|-|70|0.03|5.0|15.0|9.2|50|MAL219691152E3|
|2.8|15|12.0 x 24.0 x 2.5|2 pin|E2|-|-|85|0.12|1.2|5.0|35.0|50|MAL219691252E3|
|4.2|4|13.0 x 14.0 x 2.5|2 pin|E3|-|-|70|0.03|7.5|22.5|13.8|70|MAL219691153E3|
|4.2|15|22.0 x 24.0 x 2.5|2 pin|E3|-|-|85|0.12|1.8|7.5|52.5|35|MAL219691253E3|
|5.6|4|14.0 x 14.0 x 2.5|2 pin|E4|-|-|70|0.03|10.0|30.0|18.4|70|MAL219691154E3|
|5.6|15|24.0 x 24.0 x 2.5|2 pin|E4|-|-|85|0.12|2.4|10.0|70.0|35|MAL219691254E3|
|**LAY FLAT CONFIGURATION (LFC)**||||||||||||||
|1.4|15|14.5 x 12.0 x 2.5|2 pin|F|-|-|85|0.12|0.6|2.5|17.5|40|MAL219691261E3|
|2.8|15|14.5 x 24.0 x 2.5|2 pin|F|-|-|85|0.12|1.2|5.0|35.0|40|MAL219691262E3|
|4.2|15|14.5 x 36.0 x 2.5|2 pin|F|-|-|85|0.12|1.8|7.5|52.5|40|MAL219691263E3|
|5.6|15|14.5 x 48.0 x 2.5|2 pin|F|-|-|85|0.12|2.4|10.0|70.0|20|MAL219691264E3|
|7.0|15|14.5 x 60.0 x 2.5|2 pin|F|-|-|85|0.12|3.0|12.5|87.5|20|MAL219691265E3|
|8.4|15|14.5 x 72.0 x 2.5|2 pin|F|-|-|85|0.12|3.6|15.0|105.0|20|MAL219691266E3|
|**STACKED THROUGH HOLE OVAL**||||||||||||||
|1.4|90|35 x 25 x 5.0|3 pin|G|5|10|85|0.5|0.015|0.045|115.0|25|MAL219690106E3|
|2.8|90|35 x 25 x 7.5|3 pin|G|7.5|10|85|0.5|0.03|0.090|230.0|25|MAL219690103E3|
|4.2|90|35 x 25 x 10.0|3 pin|G|10|10|85|0.5|0.04|0.135|345.0|25|MAL219690101E3|
|5.6|90|35 x 25 x 15.0|3 pin|G|12.5|10|85|0.5|0.06|0.180|460.0|25|MAL219690102E3|
|7.0|90|35 x 25 x 17.5|3 pin|G|17.5|10|85|0.5|0.075|0.225|575.0|25|MAL219690107E3|
|8.4|90|35 x 25 x 20.0|3 pin|G|20.0|10|85|0.5|0.09|0.270|690.0|25|MAL219690108E3|
|**STACKED THROUGH HOLE OVAL HORIZONTAL**||||||||||||||
|1.4|90|35 x 25 x 5.0|3 pin|H|25|10|85|0.5|0.015|0.045|115.0|25|MAL219690116E3|
|2.8|90|35 x 25 x 7.5|3 pin|H|25|10|85|0.5|0.03|0.090|230.0|25|MAL219690113E3|
|4.2|90|35 x 25 x 10.0|3 pin|H|25|10|85|0.5|0.04|0.135|345.0|25|MAL219690111E3|
|5.6|90|35 x 25 x 15.0|3 pin|H|25|10|85|0.5|0.06|0.180|460.0|25|MAL219690112E3|
|7.0|90|35 x 25 x 17.5|3 pin|H|25|10|85|0.5|0.075|0.225|575.0|25|MAL219690117E3|
|8.4|90|35 x 25 x 20.0|3 pin|H|25|10|85|0.5|0.09|0.270|690.0|25|MAL219690118E3|



## **Notes** 

> (1) ESR AC 1 kHz are typical values 

> (2) ESR DC are typical values 

## **Table 3** 

|**LOAD CURRENTS AND VOLTAGES**|**LOAD CURRENTS AND VOLTAGES**|**LOAD CURRENTS AND VOLTAGES**|**LOAD CURRENTS AND VOLTAGES**|**LOAD CURRENTS AND VOLTAGES**|
|---|---|---|---|---|
|**CR**<br>**(F)**|**RECOMMENDED**<br>**CHARGE CURRENT**|**MAX. CHARGE**<br>**CURRENT**|**MAX. DISCHARGE**<br>**CURRENT**|**LOWEST DISCHARGE**<br>**VOLTAGE(1)**|
|4|2 mA to 8 mA|14 mA|25 mA|n x 0.8 V|
|15|5 mA to 20 mA|50 mA|70 mA|n x 0.8 V|
|90|0.3 A to 1 A|1.5 A|3 A|n x 0.8 V|



## **Note** 

> (1) n... number of cells, permanent operation below lowest discharge voltage is not permitted 

Revision: 16-Dec-2024 

Document Number: 28409 

**8** 

For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

**196 HVC ENYCAP™** 

www.vishay.com 

## Vishay BCcomponents 

## **MEASURING OF CHARACTERISTICS** 

## **CAPACITANCE (C)** 

Capacitance shall be measured by constant current discharge method. 

## **DISCHARGE CURRENT AS A FUNCTION OF RATED CAPACITANCE** 

|**DISCHARGE CURRENT AS A FUNCTION OF**<br>**RATED CAPACITANCE**|**DISCHARGE CURRENT AS A FUNCTION OF**<br>**RATED CAPACITANCE**|**DISCHARGE CURRENT AS A FUNCTION OF**<br>**RATED CAPACITANCE**|**DISCHARGE CURRENT AS A FUNCTION OF**<br>**RATED CAPACITANCE**|**DISCHARGE CURRENT AS A FUNCTION OF**<br>**RATED CAPACITANCE**|**DISCHARGE CURRENT AS A FUNCTION OF**<br>**RATED CAPACITANCE**|**DISCHARGE CURRENT AS A FUNCTION OF**<br>**RATED CAPACITANCE**|**DISCHARGE CURRENT AS A FUNCTION OF**<br>**RATED CAPACITANCE**|
|---|---|---|---|---|---|---|---|
|**PARAMETER**|||**VALUE**||||**UNIT**|
|Rated capacitance,CR|||4||15|90|F|
|Discharge|current,ID||4||15|90|mA|
|_U_R<br>_U_1<br>_U_2||||_t_1<br>_t_2<br>Δ_U_3<br>(s)||||
|||||||||
|||||||||
|||||||||
|||||||||
|||||||||
|||30 min||||||



Fig. 13 - Voltage Diagram for Capacitance Measurement 

Capacitance value CR is given by discharge current ID, time t and rated voltage UR, according to the following equation: 

- CR Rated capacitance, in F 

- UR Rated voltage, in V 

- U1 Starting voltage, in V 

- U2 Ending voltage, in V 

- ΔU3 Voltage drop at internal resistance, in V t1 reached, in sTime from start of discharge until voltage U1 is 

- t2 reached, in sTime from start of discharge until voltage U2 is 

- ID Discharge current, in A 

|**CAPACITANCE**|**CAPACITANCE**|**CAPACITANCE**|**CAPACITANCE**|**CAPACITANCE**|**CAPACITANCE**|**CAPACITANCE**|
|---|---|---|---|---|---|---|
|**C (F)**|**ID (A)**|**UR (V)**|**U1 (V)**|**U2 (V)**|**t1 (s)**|**t2 (s)**|
|90|0.090|1.4|1.3|0.7|5|> 600|
|90|0.090|2.8|2.7|1.9|5|> 600|
|90|0.090|4.2|4.0|3.1|5|> 600|
|90|0.090|5.6|5.4|4.4|5|> 600|
|90|0.090|7.0|6.7|5.6|5|> 600|
|90|0.090|8.4|8.1|6.9|5|> 600|
|**Note**|||||||



- For U2 see also Table 5 

**==> picture [148 x 82] intentionally omitted <==**

**----- Start of picture text -----**<br>
A<br>Constant<br>+ current<br>V C<br>discharger<br>**----- End of picture text -----**<br>


Fig. 14 - Test Circuit for Capacitance Measurement 

## **INTERNAL RESISTANCE (RI) AT 1 kHz** 

RI(Ω) = U----------------C(V) 10[-3] 1 mA A + C V 1 kHz Fig. 15 - Test Circuit for RI Measurement 

## **LEAKAGE CURRENT (IL)** 

CR(F) = I----------------------------------------------------------D(AU) x t1(V( )2 - U(s)2 - t(V1)(s)) For ID, U1, and U2 the following definitions have to be used: 

## **Table 4** 

|**CAPACITANCE**|**CAPACITANCE**|**CAPACITANCE**|**CAPACITANCE**|**CAPACITANCE**|**CAPACITANCE**|**CAPACITANCE**|
|---|---|---|---|---|---|---|
|**C (F)**|**ID (A)**|**UR (V)**|**U1 (V)**|**U2 (V)**|**t1 (s)**|**t2 (s)**|
|4|0.004|1.4|1.3|0.7|5|> 600|
|4|0.004|2.8|2.7|1.9|5|> 600|
|4|0.004|4.2|4.0|3.1|5|> 600|
|4|0.004|5.6|5.4|4.4|5|> 600|
|4|0.004|7.0|6.7|5.6|5|> 600|
|4|0.004|8.4|8.1|6.9|5|> 600|
|15|0.015|1.4|1.3|0.7|5|> 600|
|15|0.015|2.8|2.7|1.9|5|> 600|
|15|0.015|4.2|4.0|3.1|5|> 600|
|15|0.015|5.6|5.4|4.4|5|> 600|
|15|0.015|7.0|6.7|5.6|5|> 600|
|15|0.015|8.4|8.1|6.9|5|> 600|



Leakage current shall be measured after 30 min application of rated voltage UR: 

**==> picture [65 x 25] intentionally omitted <==**

**==> picture [181 x 116] intentionally omitted <==**

**----- Start of picture text -----**<br>
V<br>RS   100 Ω<br>+ +<br>C<br>Fig. 16 - Test Circuit for Leakage Current<br>**----- End of picture text -----**<br>


Revision: 16-Dec-2024 

Document Number: 28409 

**9** 

For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

**196 HVC ENYCAP™** 

www.vishay.com 

Vishay BCcomponents 

**==> picture [238 x 154] intentionally omitted <==**

**----- Start of picture text -----**<br>
100 000<br>IL Curve 1: 90 F (1.4 V to 8.4 V)<br>(μA) Curve 2: 15 F (1.4 V to 8.4 V)<br>10 000 Curve 3: 4 F (1.4 V to 8.4 V)<br>1000<br>1<br>100<br>2<br>10 3<br>1<br>0 10 20 30 40 50 60 70 80<br>Time (h)<br>**----- End of picture text -----**<br>


Fig. 17 - Typical Leakage Current at 20 °C as a Function of Time 

**Table 5** 

|**VOLTAGE TO BE USED FOR SERIES CONNECTION**|**VOLTAGE TO BE USED FOR SERIES CONNECTION**|**VOLTAGE TO BE USED FOR SERIES CONNECTION**|**VOLTAGE TO BE USED FOR SERIES CONNECTION**|
|---|---|---|---|
|**N CELLS IN SERIES**|**UR (V)**|**U1 (V)**|**U2 (V)**|
|1|1.4|1.3|0.7|
|2|2.8|2.7|1.9|
|3|4.2|4.0|3.1|
|4|5.6|5.4|4.4|
|5|7.0|6.7|5.6|
|6|8.4|8.1|6.9|



## **DISCHARGE CHARACTERISTICS** 

Backup time of 196 HVC series capacitors depends on minimum memory holding voltage and discharge current (corresponding with the current consumption of the load). 

For minimum backup times of standard and vertical miniaturized series see Fig. 18 to Fig. 20 (charging time ≥ 24 h and CC-CV charging according to table 3). 

**==> picture [234 x 157] intentionally omitted <==**

**----- Start of picture text -----**<br>
10 [5]<br>Backup<br>time<br>(s)<br>10 [4]<br>10 [3]<br>10 [2]<br>10<br>C = 4 F (1.4 V to 8.4 V)<br>1<br>0.1 1 10 100<br>Discharge current (mA)<br>**----- End of picture text -----**<br>


Fig. 18 - Typical Backup Time as a Function of Discharge Current 

**==> picture [234 x 159] intentionally omitted <==**

**----- Start of picture text -----**<br>
10 [6]<br>Backup<br>time<br>(s)<br>10 [5]<br>10 [4]<br>10 [3]<br>10 [2]<br>10<br>C = 15 F (1.4 V to 8.4 V)<br>1<br>0.1 1 10 100<br>Discharge current (mA)<br>**----- End of picture text -----**<br>


Fig. 19 - Typical Backup Time as a Function of Discharge Current 

Revision: 16-Dec-2024 

Document Number: 28409 

**10** For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

**196 HVC ENYCAP™** 

www.vishay.com 

## Vishay BCcomponents 

**==> picture [234 x 158] intentionally omitted <==**

**----- Start of picture text -----**<br>
10 [6]<br>Backup<br>time<br>(s)10 [5]<br>10 [4]<br>10 [3]<br>10 [2]<br>10<br>C = 90 F (1.4 V to 8.4 V)<br>1<br>1 10 100 1000 10 000<br>Discharge current (mA)<br>**----- End of picture text -----**<br>


Fig. 20 - Typical Backup Time as a Function of Discharge Current 

## **CHARGE CHARACTERISTICS** 

**==> picture [236 x 378] intentionally omitted <==**

**----- Start of picture text -----**<br>
Charge cc 4 mA/5.6 V and discharge 4 mA/3.2 V<br>6 10<br>Voltage<br>5 7.5<br>4 5<br>3 2.5<br>2 0<br>1 -2.5<br>Current<br>0 -5<br>0 5 10 15 20 25<br>t (min)<br>Fig. 21 - Constant Current (CC) with V-Limit Charging Method at RT<br>Typical Charge / Discharge Characteristics at RT: 4 F / 5.6 V<br>Charge cc 10 mA/5.6 V and discharge 15 mA/3.2 V<br>6 40<br>Voltage<br>5 30<br>4 20<br>3 10<br>2 0<br>1 -10<br>Current<br>0 -20<br>0 5 10 15 20 25 30 35 40 45 50<br>t (min)<br>Voltage (V)<br>Current (mA)<br>Voltage (V)<br>Current (mA)<br>**----- End of picture text -----**<br>


Fig. 21 - Constant Current (CC) with V-Limit Charging Method at RT Typical Charge / Discharge Characteristics at RT: 4 F / 5.6 V 

Fig. 23 - Constant Current (CC) with V-Limit Charging Method at RT Typical Charge / Discharge Characteristics at RT: 15 F / 5.6 V 

**==> picture [237 x 377] intentionally omitted <==**

**----- Start of picture text -----**<br>
Charge cccv 4 mA/5.6 V + 30 min and discharge 4 mA/3.2 V<br>6 10<br>Voltage<br>5 7.5<br>4 5<br>3 2.5<br>2 0<br>1 -2.5<br>Current<br>0 -5<br>0 10 20 35 40 50 60 70 80<br>t (min)<br>Fig. 22 - Constant Current (CC)-Constant Voltage (CV)<br>Charging Method at RT<br>Typical Charge / Discharge Characteristics at RT: 4 F / 5.6 V<br>Charge cccv 10 mA/5.6 V + 30 min and discharge 15 mA/3.2 V<br>6 40<br>Voltage<br>5 30<br>4 20<br>3 10<br>2 0<br>1 Current -10<br>0 -20<br>0 10 20 35 40 50 60 70 80 90<br>t (min)<br>Voltage (V)<br>Current (mA)<br>Voltage (V)<br>Current (mA)<br>**----- End of picture text -----**<br>


Fig. 24 - Constant Current (CC)-Constant Voltage (CV) Charging Method at RT Typical Charge / Discharge Characteristics at RT: 15 F / 5.6 V 

## **Note** 

- Charge and discharge cycles at room temperature (RT) - maximal 50 000 cycles at room temperature allowed! 

Revision: 16-Dec-2024 

Document Number: 28409 

**11** For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

**196 HVC ENYCAP™** 

www.vishay.com 

## Vishay BCcomponents 

**==> picture [503 x 165] intentionally omitted <==**

**----- Start of picture text -----**<br>
Charge cc 300 mA / 5.6 V and discharge 1 A / 3.2 V Charge cccv 300 mA / 5.6 V + 30 min and discharge 1 A / 3.2 V<br>6 1500 6 1500<br>Voltage<br>5 1000 5 Voltage 1000<br>4 500 4 500<br>3 0 3 0<br>2 -500 2 -500<br>Current Current<br>1 -1000 1 -1000<br>0 -1500 0 -1500<br>0 2 4 6 8 10 12 14 16 18 20 0 10 20 35 40 50 60<br>t (min) t (min)<br>Voltage (V) Voltage (V)<br>Current (mA) Current (mA)<br>**----- End of picture text -----**<br>


Fig. 25 - Constant Current (CC) with V-Limit Charging Method at RT Typical Charge / Discharge Characteristics at RT: 90 F / 5.6 V 

Fig. 26 - Constant Current (CC)-Constant Voltage (CV) Charging Method at RT Typical Charge / Discharge Characteristics at RT: 90 F / 5.6 V 

## **Note** 

- Charge and discharge cycles at room temperature (RT) - maximal 50 000 cycles at room temperature allowed! 

|**CHARGING VOLTAGE AT DIFFERENT TEMPERATURES**|**CHARGING VOLTAGE AT DIFFERENT TEMPERATURES**|**CHARGING VOLTAGE AT DIFFERENT TEMPERATURES**|**CHARGING VOLTAGE AT DIFFERENT TEMPERATURES**|**CHARGING VOLTAGE AT DIFFERENT TEMPERATURES**|
|---|---|---|---|---|
|**OPERATING TEMPERATURE RANGE**|**0 °C UP TO +45 °C**||**+45 °C UP TO +60 °C**|**+60 °C UP TO +70 °C / +85 °C**|
|Charge voltage|1 cell|UR+ 0.03 V|UR|UR- n(1)x 0.0015 x (T[°C] - 45)|
||2 cells|UR+ 0.06 V|||
||3 cells|UR+ 0.09 V|||
||> 4 cells|UR+ 0.10 V|||



## **Notes** 

- Capacitor is polarized, product will be damaged if reverse charged 

- Voltages higher than specified need to be avoided; otherwise reduction of life time, internal gas generation or damage of HVC hybrid capacitor will occur 

- For other operating temperatures, a temperature derating factor has to be considered for correct charging voltage 

- Surge voltage is only allowed a few seconds per day, but not as a charging process 

- (1) n... number of cells 

## **DERATING** 

Working voltage at temperatures above 60 °C should be below rated voltage UR. A derating-factor of -1.5 mV/°C per cell is recommended. 

## **PRODUCT AND MOUNTING CHARACTERISTICS** 

## **Attention: parts are pre-charged at delivery - handle appropriate.** 

At delivery products are pre-charged and voltage over terminals is near nominal voltage. Short circuiting of product terminals is permitted. Do not short circuit permanently. Short circuiting of charged cells may heat up the cells. 

For printed circuit board mounting it has to be taken into account, that for certain form factors top and bottom of products may not be insulated. 

Capacitor disposal methods should be in accordance with local and state regulations. 

Revision: 16-Dec-2024 

Document Number: 28409 

**12** For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

_**End of Life - Last Available Purchase Date: 29-August-2025**_ 

## **196 HVC ENYCAP™** 

www.vishay.com 

Vishay BCcomponents 

## **Table 6.1** 

## **TEST PROCEDURES AND REQUIREMENTS** 

|**TEST PROCEDURES AND REQUIREMENTS**|**TEST PROCEDURES AND REQUIREMENTS**|**TEST PROCEDURES AND REQUIREMENTS**|**TEST PROCEDURES AND REQUIREMENTS**|
|---|---|---|---|
|**NAME OF TEST**|**ENYCAP**<br>**TESTS**<br>**SUBCLAUSE**|**PROCEDURE**<br>**(quick reference**)|**REQUIREMENTS(2)**|
|Damp heat, steady state|4.12|500 h at 55 °C; RH 90 % to 95 %; no voltage applied|ΔC/C: ± 30 %<br>RI ≤4 x spec. limit<br>IL ≤2 x spec. limit|
|Endurance|4.13.1|Tamb= 70 °C / 85 °C; rated voltage URapplied;<br>4.0 F, 15 F: 1000 h<br>90 F: 2000 h|ΔC/C: ± 30 %<br>RI ≤4 x spec. limit<br>IL ≤2 x spec. limit|
|Useful life|4.13.2|Tamb= 70 °C / 85 °C; rated voltage URapplied;<br>4.0 F, 15 F: 1000 h<br>90 F: 2000 h|ΔC/C: ± 30 %<br>RI ≤4 x spec. limit<br>IL ≤2 x spec. limit|
|Storage at upper category<br>temperature|4.17|Tamb= 70 °C / 85 °C; no voltage applied;<br>1000 h|ΔC/C: ± 30 %<br>RI ≤4 x spec. limit<br>IL ≤2 x spec. limit|
|Self discharge|4.1.5|24 h storage at room temperature after application<br>of URfor 1 h|Remaining voltage:≥(URx 0.9)|
|Characteristics at high and<br>low temperature|4.19|Step 1: reference measurement at 20 °C of C, RI, and IL<br>Step 2: measurement at -20 °C<br>Step 3: measurement at +20 °C<br>Step 4: measurement at +70 °C<br>Step5: measurement at +20 °C|ΔC/C: ± 30 % of +20 °C value<br>RI ≤5 x the +20 °C value<br>IL ≤4 x the +20 °C value|
|Surge voltage|4.15|Max. 30 s at room temperature<br>US= n(1)x 1.6 V|No change of parameter!<br>After surge voltage, discharge<br>product below rated voltage|



## **Notes** 

- (1) n... number of cells 

- (2) RI equals ESRAC or ESRDC 

**Table 6.2: Stacked Through Hole configuration (STH), Surface Mount Flat configuration (SMF), and Lay Flat configuration with Connector** 

## **TEST PROCEDURES AND REQUIREMENTS** 

|**TEST PROCEDURES AND REQUIREMENTS**|**TEST PROCEDURES AND REQUIREMENTS**|**TEST PROCEDURES AND REQUIREMENTS**|**TEST PROCEDURES AND REQUIREMENTS**|
|---|---|---|---|
|**NAME OF TEST**|**ENYCAP**<br>**TESTS**<br>**SUBCLAUSE**|**PROCEDURE**<br>**(quick reference**)|**REQUIREMENTS(1)**|
|Robustness of terminations|4.4|Tensile strength; application of load force in pin / tab<br>direction for 10 s:<br>10 N: for product size Ø≥8 mm<br>5 N: forproduct size Ø < 8 mm|No breaks|
|Resistance to soldering heat|4.5|260 °C; 5 s|ΔC/C: ± 10 %<br>RIand IL ≤spec. limit|
|Solderability|4.6|Solder bath;236 °C;2 s;onepin immersed|≥75 % tinning|
|Vibration|4.8|10 Hz to 55 Hz; 1.5 mm; 3 directions;<br>2 hper direction|ΔC/C: ± 10 %<br>RIand IL ≤spec. limit|



## **Notes** 

- Robustness - bending limited to ± 15°, force in direction of tab / pin, no twisting allowed 

- Solder bath test: max. allowed case temperature during test is e.g. 85 °C or immersion of one (1) pad only 

- Wave soldering allowed 

- (1) RI equals ESRAC or ESRDC 

## **SOLDERING** 

As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering connections. However, the maximum specified soldering time and case temperature should never be exceeded. 

## **EVALUATION KIT** 

Evaluation kits are available under ordering code: MAL219699001E3. The engineering kit includes a charge and discharge demo board with different 196 HVC capacitor samples. 

For further details, please contact hybridstorage@vishay.com. 

_Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability._ 

Document Number: 28409 

Revision: 16-Dec-2024 

**13** 

For technical questions, contact: hybridstorage@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 

**Legal Disclaimer Notice** Vishay 

www.vishay.com 

## **Disclaimer** 

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. 

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. 

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. 

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. 

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. 

Vishay products are not designed for use in life-saving or life-sustaining applications or any application in which the failure of the Vishay product could result in personal injury or death unless specifically qualified in writing by Vishay. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. 

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 

Document Number: 91000 

_**© 2024 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED**_ 

Revision: 01-Jul-2024 

**1** 

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Updated at April 29, 2026
Vishay is a global leader in the manufacturing of discrete semiconductors and passive electronic components. Renowned for its exceptional quality and engineering expertise, the company produces highly reliable solutions that drive innovation across the industrial, automotive, telecommunications, and consumer electronics markets. From advanced factory automation to vehicle electrification, Vishay components provide the foundational building blocks for modern electronic design. The company's expansive portfolio is heavily focused on efficient power management, signal routing, and energy storage. Within its passive component lineup, Vishay is recognized for its extensive array of high-performance capacitors, including robust aluminium electrolytic, film, and polymer variants, alongside highly efficient power inductors. In the realm of discrete semiconductors, Vishay is a premier manufacturer of single and dual MOSFETs, as well as a vast selection of Schottky, Zener, and fast-recovery rectifier diodes designed for demanding power applications. Furthermore, Vishay delivers industry-leading circuit protection and thermal management solutions. With a broad offering of transient voltage suppressors (TVS diodes) and temperature-sensing NTC thermistors, these components are engineered to safeguard sensitive circuitry against both electrical and thermal overstress. By combining this vital mix of advanced discretes and passives, Vishay enables engineers to develop robust, space-saving, and highly resilient electronic systems.
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →