M6J200A3106

## Product Data Sheet 

## **Class J Fused Distribution Block** 

## M6J200Ax106 

Replace “x” with 1 or 3 for number of poles 

## **Wire Range** 

- Line:  250 kcmil - #6 AWG CU 

- Load: (6) #2 - #14 AWG 

## **Electrical Ratings** 

- 110 - 200A Max 

   - Amperage rating based on maximum fuse rating for that physical size 

- 600 Volts AC 

- Approved for 200,000 Amp Withstand Rating 

## **Agency Compliance** 

- UL Listed, Fuse holder standards UL 4248-1 and UL 4248-8 

- UL File No. IZLT.E35113 

- UL Feeder Circuit Compliant PerUL508A 

- CSA File No. LR21455 

- RoHS Compliant 

## **Material Information** 

- Insulator base: 

   - High Impact Thermoplastic 

   - Flammability rating of insulator base UL94 V-0 

   - Insulator base maximum temperature rating: 125°C (UL RTI) 

   - Use outside these ratings needs to be judged in the end-use application 

- Connector: Aluminum, tin plated 

- Terminal set screws: Aluminum, tin plated 

- 5/16” Belleville Washer: Steel, zinc plated 

- Bolt: Steel, nickel plated 

- Connector mounting screws: Steel, zinc plated 

www.marathonsp.com 

1 

## Product Data Sheet 

## **Termination Specifications** 

|LINE<br>Side|Wire Size<br>(CU Stranded)|Torque|Wires/ Terminal|Wire Class (UL)|
|---|---|---|---|---|
||250 kcmil - #1|275 in·lbs|1|B, C|
||#2 - #6|120 in·lbs|1|B,C|



- Wire Strip length - 15/16” 

- Hex key needed - 5/16” 

|LOAD<br>Side|Wire Size<br>(CU Stranded)|Torque|Wires/ Terminal|Wire Class (UL)|
|---|---|---|---|---|
|a ~~a~~<br>~~rr~~|#2 - #6<br>~~a~~|50 in·lbs|1|B,C|
||#8<br>~~a~~<br>~~rr~~|40 in·lbs<br>~~ee~~|1<br>~~ee~~|B,C<br>~~ee~~|
||#10-14<br>~~rr~~|35 in·lbs<br>~~ee~~|1<br>~~ee~~|B,C<br>~~ee~~|



- Solid copper wire range: 10 - 14 

- Aluminum wire range: #2-12 AWG 

- Wire strip length: 

   - 9/16 in. (14mm) top row 

   - 1 1/16 in. (27mm) bottom row 

- Terminal screw drive: 5/32 in. Hex 

## **Installation & Accessories** 

- Mounting (Panel): 

   - For use with 1/4” (M6) fastener, 

   - Mounting torque to be determined in end use application. Not to exceed 25 lbf-in (2.8 N-M) 

- Fuse Installation: 

   - Fuses are to be mounted with the hardware supplied. 

   - Fuse mounting torque not to exceed 70 lbf-in (7.9 N-M) 

- Cover: 

   - Snap on cover with translucent material 

   - Catalog number: CJ6200M 

REV-A 08/08/20 

www.marathonsp.com 

2 

## Product Data Sheet 

## **Drawing** 

REV-A 08/08/20 

www.marathonsp.com 

3