M323M-00000P-017BG

## M3200 

## Pressure Transducer 

## SPECIFICATIONS 

- **Analog Outputs (V/mA)** 

- **14-Bit Digital Output for Pressure and 11-Bit for Temperature** 

- **CE Compliance** 

- **Weatherproof** 

- **0.5% zero offset** , **1.5 % accuracy (Total error band)** 

The M3200 pressure transducer from the Microfused line of TE is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. 

## FEATURES 

- One Piece Stainless Steel Construction 

- Digital Pressure and Temperature Output or Analog mV/Amplified Output 

- Compact 

- 17-4PH Stainless Steel 

- Customizable 

## APPLICATIONS 

- Pumps and Compressors 

- Hydraulic/Pneumatic Systems 

- Automotive Test Systems 

- Energy and Water Management 

- Medical Gas Pressure 

- Leak Detection 

The transducer pressure cavity is machined from a solid piece of 17-4PH stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. With excellent durability, there are no welds or organics exposed to the pressure media. 

TE’s proprietary Microfused technology, derived from demanding aerospace applications, employs micromachined silicon piezoresistive strain gages fused with high temperature glass to a stainless-steel diaphragm. This approach achieves media compatibility simply and elegantly while providing an exceptionally stable sensor without the PN junctions of conventional micromachined sensors. 

This product is geared towards industrial and commercial OEMs for small to high volume applications. Standard configurations are suitable for many applications. Please contact factory for your customization needs. 

- Remote Measuring Systems 

- General Pressure Measurements 

08/2018 

SENSOR SOLUTIONS ///M3200 

Page 1 

M3200 Pressure Transducer 

## STANDARD RANGES 

|**Range (psi)**|**Range (bar)**|**Gage/Compound**|
|---|---|---|
|0 to 100|0 to 007||
|0 to 250|0 to 017||
|0 to 500|0 to 035||
|0 to 01k|0 to 070||
|0 to 2k5|0 to 170||
|0 to 05k|0 to 350||
|0 to 7k5|0 to 500||
|0 to 10k|0 to 700||



## PERFORMANCE SPECIFICATIONS (ANALOG) 

## **Unless otherwise specified: All parameters measured at 25°C** 

|Accuracy<br>(Combined linearity, hysteresis & repeatability)|-0.25||0.25|% F.S BFSL||
|---|---|---|---|---|---|
|Zero offset|-0.5||0.5|%F.S.|@ 25°C|
|Pressure Cycles|1.0E+6|||0~F.S. Cycles||
|Proof Pressure|2X|||Rated||
|Burst Pressure|5X|||Rated|≤20kpsi|
|Isolation, Body to Any Lead|50|||MΩ|@ 250VDC|
|Load Resistance (RL)|>100|||kΩ|Voltage Output|
|Load Resistance|<(SupplyVoltage-9V)/0.02A|||Ω|Current Output|
|Current Consumption|||5|mA|Voltage Output|
|Dielectric Strength|||2|mA|@500 VAC1 min|
|Long Term Stability (1 year)|-0.25||0.25|%Span||
|Total Error Band|-1.5||1.5|%F.S.|Over comp. temp|
|Compensated Temperature|-20||85|°C||
|Operating Temperature|-40||125|°C|Except Cable<br>105°C max|
|Storage Temperature|-40||125|°C|Except Cable<br>105°C max|
|Weather proof Rating|IP67 for cable & M12 type, IP66 for Packard type, IP65 for Form C type||||e<br>Note 1|
|Rise Time (10% - 90%)|<2 ms(mV Output); <3ms(mA Output)|||||
|Wetted Material|17-4PH Stainless Steel|||||
|Shock|50g, 11 msec Half Sine Shockper MIL-STD-202G, Method 213B, Condition A|||||
|Vibration|±20g, MIL-STD-810C, Procedure 514.2-2, Curve L|||||



**Compliances[6]** 

EN 55022 Emissions Class A & B 

IEC 61000-4-2 Electrostatic discharge immunity (4kv contact / 8kv air discharge) 

IEC 61000-4-3 Radiated, Radio-Frequency Electromagnetic field immunity (10 V/m; 80M-1GHz; 3 V/m, 1.4 – 2.0GHz; 1 V/m, 2.0 – 2.7GHz) IEC 61000-4-4 Electrical Fast Transient/Burst Immunity (±1kV) 

IEC 61000-4-5 Surge (line to line: ±1.0kV/42Ω; Line to case: ±1.0kV/42Ω) 

IEC 61000-4-6 Immunity to conducted disturbances, induced by radio-frequency fields (150k-80MHz, 3VRMS for current output model, 10VRMS for voltage model) 

08/2018 

SENSOR SOLUTIONS ///M3200 

Page 2 

M3200 Pressure Transducer 

## PERFORMANCE SPECIFICATIONS (DIGITAL) 

## **Unless otherwise specified: All parameters measured at 25°C & 3.3vDC** 

|Output at Zero Pressure|750|1000|1250|Count||
|---|---|---|---|---|---|
|Output at FS Pressure|14720|15000|15250|Count||
|Current Consumption|||3.5|mA||
|Current Consumption (sleep mode)|||5|µA||
|Supply Voltage|2.7||5.0|V||
|Proof Pressure|2X|||Rated||
|Burst Pressure|5X|||Rated|No More than<br>20kpsi|
|Isolation, Body to Any Lead|50|||MΩ|@ 250VDC|
|Pressure Cycles|1.00E+6|||0~F.S. Cycles||
|Pressure Accuracy (RSS combined<br>Non-Linearity, Hysteresis &<br>Repeatability)|-0.25||0.25|%F.S. BFSL|@ 25°C|
|Temperature Accuracy|-3||3|°C|Note 2|
|Long Term Stability (1 year)|-0.25||0.25|%F.S.||
|Total Error Band|-1.5||1.5|%F.S.|Over compTemp.|
|Compensated Temperature|0||55|°C||
|Compensated Temperature Output|512||1075|Count|For reference|
|Operating Temperature|-20||+85|°C||
|Storage Temperature|-40||+85|°C||
|Response time|||3|ms @ 4MHz|Non-sleep mode,<br>note 3|
|Response time|||8.4|ms @ 4MHz|Sleepmode, note 3|
|Wetted Material (except elastomer seal)|17-4PH Stainless Steel|||||
|Shock|50g, 11 msec Half Sine Shockper MIL-STD-202G, Method 213B, Condition A|||||
|Weather proof Rating3|IP67|||||
|Vibration|±20g, MIL-STD-810C, Procedure 514.2-2, Curve L|||||



**Compliance[6]** 

## EN 55011 Emissions Class A & B 

IEC 61000-4-2 Electrostatic Discharge Immunity (4kV contact/8kV air discharge) 

IEC 61000-4-3 Radiated Radio-Frequency Electromagnetic Field Immunity (1V/m, 80M-1GHz; 3 V/m, 1.4 – 2.0GHz; 1V/m, 2.0-2.7GHz) 

IEC 61000-4-4 Electrical Fast Transient/Burst Immunity (±1kV) 

IEC 61000-4-6 immunity to conducted disturbances, induced by radio-frequency fields (150k-80MHz, 3VRMS) 

## **Notes** 

1. Weather-proof ratings are met when the mating connectors are properly installed and cable termination to dry and clean area. For Cable option, IP67 is guaranteed under room temperature. 

2. Reflect pressure port diaphragm temperature over the compensated temperature range. 

3. Response time is from power on to reading measurement data. 

4. For all CE compliance test, max allowed output deviation is ±1.5%F.S. 

5. All Configurations are built with Voltage Reverse and output Short-Circuit Protections. 

6. For communication and interfacing, refer to document ‘Interfacing to MEAS Digital Pressure Modules’ online 

08/2018 

SENSOR SOLUTIONS ///M3200 

Page 3 

M3200 Pressure Transducer 

## DIMENSIONS 

**==> picture [62 x 85] intentionally omitted <==**

**----- Start of picture text -----**<br>
AS<br>©<br>I=L<br>**----- End of picture text -----**<br>


|se|se|se|se|se|se|se|se|se|
|---|---|---|---|---|---|---|---|---|
|**Digital Output I2C Wiring**<br>Connection<br>**+Supply**<br>**-Supply**<br>**SCL**<br>**SDA**<br>se<br>~~CO~~|||||||||
||**Cable**||RED||BLACK|WHITE<br>GREEN|||
|**Current Output Wiring**<br>Connection<br>**+Supply**<br>**M12**|||**-Supply**<br>1||**NC. Pins**<br>3|4|**PREF Vent**<br>2||
|**Packard A**||A|B||C||Hole through||
||||||||connector||
|Packard B||B|A||C||Hole through||
||||||||connector||
|**Form C**||1|2||3, 4||Thread through|Thread through|
||||||||connector||
|**Cable**<br>**M12**||Red<br>1|Black<br>3||-<br>2,4||In Cable<br>Hole through<br>connector||



## **Voltage Output Wiring** 

|2.03Max.a<br>3<br>SS|2.03Max.a<br>3<br>SS|2.03Max.a<br>3<br>SS|2.03Max.a<br>3<br>SS|2.03Max.a<br>3<br>SS|2.03Max.a<br>3<br>SS|2.03Max.a<br>3<br>SS|
|---|---|---|---|---|---|---|
|**Voltage Output Wiring**|||||||
|**Connection**|**+Supply**|**-Supply**|**+Output**|**-Output**|**NC.**<br>**Pins***|**PREF Vent**|
|**Packard A**|A|B|C|-|-|Hole through Connector|
|**Packard B**|B|A|C|-|-|Hole through Connector|
|**Form C**|1|2|3|-|4|Thread through Connector|
|**Cable**|Red|Black|White|Not connected|-|In Cable|
|M12|1|3|2||4|Hole through Connector|



08/2018 

SENSOR SOLUTIONS ///M3200 

Page 4 

M3200 Pressure Transducer 

## Notes: 

- *NC. Pins are reserved for factory use only. **DO NOT CONNECT.** 

- **For cable connections, drain wire is internally terminated to pressure port. 

drain wire is not available for I2C output option 

- *** Cable material `：` 4C*22AWG + DRAIN + AL.MYLAR  + PVC Jacket 

Transmitter of gage pressure type requires vent to atmosphere on the pressure reference side. 

 Accomplished via cable from transmitter or through customer mating connector/cable assembly which has internal vent path (end of cable should be terminated to clean & dry area) 

Weather-proof Ratings are met when Mating Connectors are installed properly, and cable termination is to dry and clean area. 

## PRESSURE PORTS 

|**Code**|**Pressure Port**|**Dim C**|**Recommended Torque [Nm]**|
|---|---|---|---|
|4|7/16-20 UNF Male SAE J1926-2 Straight Thread<br>O-Ring BUNA-N 90SH ID8.92xW1.83mm|0.45 [11.43]|18-20|
|5|1/4-18 NPT|0.65 [16.51]|2-3 TFFT*|
|6|1/8-27 NPT|0.53 [13.46]|2-3 TFFT*|
|B|G1/4 JIS B2351 with NBR O-ring|0.47 [11.94]|30-35|
|E|1/4-19 BSPT|0.50 [12.70]|2-3 TFFT*|
|P|7/16-20 UNF Female SAE J513 Straight Thread<br>w/ Integral Valve Depressor|0.43 [10.92]|15-16|



- *Turn From Finger Tight 

08/2018 

SENSOR SOLUTIONS ///M3200 

Page 5 

M3200 Pressure Transducer 

## DIGITAL PRESSURE OUTPUT 

|DIGITAL PRESSURE OUTPUT|||
|---|---|---|
|**% Output**|**Digital Counts (Decimal)**|**Digital Counts (Hex)**|
|0%|1000|0x3E8|
|5%|1700|0X6A4|
|10%|2400|0X960|
|50%|8000|0X1F40|
|90%|13600|0X3520|
|95%|14300|0X37DC|
|100%|15000|0X3A98|



08/2018 

SENSOR SOLUTIONS ///M3200 

Page 6 

M3200 Pressure Transducer 

## DIGITAL TEMPERATURE OUTPUT 

|**Output °C**|**Digital Counts (Decimal)**|**Digital counts**|
|---|---|---|
|0|512|0x200|
|10|614|0x266|
|25|767|0x2FF|
|40|921|0x399|
|55|1075|0x433|



08/2018 

SENSOR SOLUTIONS ///M3200 

Page 7 

M3200 Pressure Transducer 

## OUTPUT (ANALOG) 

|**Code**|**Output**|**Supply**|**Ratiometricity**|**Red**|**Black**|**Green**|**White**|
|---|---|---|---|---|---|---|---|
|**3**|0.5 – 4.5V|5 ± 0.25V|5 ± 0.25V<br>Yes|+Supply|Common|Not connected|Not connected<br>+Output|
|**5**|4 – 20mA|9 – 30V|No|+Supply|-Supply|Not connected|Not connected<br>Not connected|
|**6**|0 – 5 V|8 – 30V|No|+Supply|-Supply|Not connected|Not connected<br>+Output|
|**7**|0 – 10 V|12 – 30 V|12 – 30 V<br>No|+Supply|-Supply|Not connected|Not connected<br>+Output|
|**8**|1 – 5 V|8 – 30 V|No|+Supply|-Supply|Not connected|Not connected<br>+Output|



## OUTPUT (DIGITAL) 

|OUTPUT (DIGITAL)|OUTPUT (DIGITAL)||||||
|---|---|---|---|---|---|---|
|**Code**|**Output**|**Supply**|**Red**|**Black**|**Green**|**White**|
|**J**|I2C|2.7 – 5.0V|2.7 – 5.0V<br>+Supply|-Supply|SDA|SCL|



08/2018 

SENSOR SOLUTIONS ///M3200 

Page 8 

M3200 Pressure Transducer 

ORDERING INFORMATION For Analog Output: M32 3 4 – 00000 4 – 250P G **Output Pressure Type Code** Output **G** Gage **3** 0.5-4.5V **C** Compound **5** 4-20mA Compound pressure range is -14.7 to XXX psiG or -1 to XXX barG. **6** 0-5V i.e. 200PC: -14.7 to 200psiG, 020BC: -1 to 20 barG **7** 0-10V **8** 1~5V **Pressure Range psi bar STD STD** ~~=A —~~ **Connection** ~~es~~ **100P 007B 4** Packard A Connector ~~PO—“(—tstsSd~~ **250P 017B 6** Form C with Mating Connector **500P 035B 9** Packard B Connector **01KP 070B D** M12 Connector **2K5P 170B L** Cable 0.5m **05KP 350B M** Cable 1m **7K5P 500B N** Cable 2m ~~———~~ **10KP 700B P** Cable 5m Pressure Ranges between 100-10000psi (7-700bar) are all available.  Change Pressure Number Accordingly **Snubber Pressure Port 0** No snubber **Code** Description **1** With snubber* **4** 7/16-20 UNF Male SAE J1926-2 Straight Thread O-ring 90SH ID8.92xW1.83mm *Available for G1/4 port only,  more snubber option, please consult with factory ~~— ——_~~ **5** 1/4-18 NPT **6** 1/8-27 NPT For Digital Output, see “For Digital Output” Ordering Information **B** G1/4 JIS B2351 with NBR O-ring All Configurations are built with Voltage Reverse and Output Short-Circuit Protections. ~~——~~ **E** 1/4-19 BSPT **P** 7/16-20 UNF Female SAE J513 Straight Thread || with Integral Valve Depressor | 

Click here for Torque Recommendation 

08/2018 

SENSOR SOLUTIONS ///M3200 

Page 9 

M3200 Pressure Transducer For Digital Output: M32 J L – 000 0 0 4 – 250P G **Output Pressure Type Code** Output **G** Gage **J** I[2] C **C** Compound **Connection** Compound pressure range is -14.7 to XXX psiG or -1 to XXX barG. Ex. 200PC: -14.7 to 200psiG, 020BC: -1 to 20 barG **L** Cable 0.5m **M** Cable 1m **Pressure Range D** M12 connector **psi bar STD STD Snubber 100P 007B 0** No snubber **250P 017B 1** With snubber* **500P 035B 01KP 070B** *Available for G1/4 port only,More snubber options, please consult with factory. **2K5P 170B 05KP 350B 7K5P 500B Sleep Mode (Digital ONLY) 10KP 700B 0** Non-Sleep Mode **1** Sleep Mode Pressure Ranges between 100-10000psi (7-700bar) are all available.  Change Pressure Number Accordingly **Pressure Port** ~~|=~~ **Digital Address (Digital ONLY) Code** Description **0** 0X28H **4** 7/16-20 UNF Male SAE J1926-2 Straight Thread O-ring BUNA-N 90SH ID8.92xW1.83mm **1** 0X36H **5** 1/4-18 NPT **2** 0X46H **6** 1/8-27 NPT **3** 0X48H **B** G1/4 JIS B2351 with NBR O-ring **4** 0X51H **E** 1/4-19 BSPT **P** 7/16-20 UNF Female SAE J513 Straight Thread ~~= =~~ with Integral Valve Depressor Click here for Torque Recommendation All Configurations are built with Voltage Reverse and Output Short-Circuit Protections. **NORTH AMERICA EUROPE ASIA** Measurement Specialties, Inc., Measurement Specialties (Europe), Ltd., Measurement Specialties (China), Ltd., a TE Connectivity Company a TE Connectivity Company a TE Connectivity Company Phone: +1 800-522-6752 Phone: +31 73 624 6999 Phone: +86 0400-820-6015 Email: customercare.lcsb@te.com Email: customercare.shzn@te.com 

Measurement Specialties, Inc., a TE Connectivity Company Phone: +1 800-522-6752 Email: customercare.frmt@te.com 

## **TE.com/sensorsolutions** 

Measurement Specialties, Inc., a TE Connectivity company. 

Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. 

The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2018 TE Connectivity Ltd. family of companies All Rights Reserved. 

08/2018 

SENSOR SOLUTIONS ///M3200 

Page 10