M18SP6DQ

M18 Series Sensor 

## Features 

- 18 mm threaded-barrel sensor 

- 10 V DC to 30 V DC; choose SPDT (complementary) NPN or PNP outputs (150 mA maximum, each) 

- Easy to use; no adjustments are necessary 

- • Advanced self-diagnostics with separate alarm output (U.S. patent 5087838 (see Specifications)); dual LED system indicates sensor performance 

- Choice of integral cable or M12 quick disconnect connector 

- • Completely epoxy-encapsulated to provide superior durability, designed to meet rigorous IP69K standards for use in high pressure washdowns 

- • Brackets available for a wide array of mounting options 

## WARNING: 

- Do not use this device for personnel protection 

- Using this device for personnel protection could result in serious injury or death. 

- This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. 

## Models 

M18 Series Sensing Mode Options 

**==> picture [475 x 80] intentionally omitted <==**

**----- Start of picture text -----**<br>
P<br>OPPOSED POLAR RETRO DIFFUSE FIXED-FIELD<br>ie ee Pi<br>To order the 9 m (30 ft) cable model (not available for all models), add the suffix  W/30  (M18SN6R W/30). Models with a QD connector<br>require a mating cable.<br>**----- End of picture text -----**<br>


Opposed-Mode Emitter (E) and Receiver (R) 

**==> picture [455 x 280] intentionally omitted <==**

**----- Start of picture text -----**<br>
Models (Infrared, 950 nm) Range Cable Output Type<br>M186E 2 m (6.5 ft)<br>M186EQ 4-pin M12 QD -<br>M186EQP 150 mm cable with a 4-pin M12 QD<br>M18SN6R 2 m (6.5 ft)<br>20 m (66 ft) NPN<br>M18SN6RQ 4-pin M12 QD<br>M18SP6R 2 m (6.5 ft)<br>M18SP6RQ 4-pin M12 QD PNP<br>M18SP6RQP 150 mm cable with a 4-pin M12 QD<br>Retroreflective Mode (Infrared, 950 nm)<br>Models Range Cable Output Type<br>M18SN6L 2 m (6.5 ft)<br>NPN<br>M18SN6LQ 4-pin M12 QD<br>2 m (79 in)<br>M18SP6L 2 m (6.5 ft)<br>PNP<br>M18SP6LQ 4-pin M12 QD<br>Polarized Retroreflective Mode (Visible Red, 680 nm)<br>Models Range Cable Output Type<br>M18SN6LP 2 m (6.5 ft)<br>2 m (79 in) NPN<br>M18SN6LPQ 4-pin M12 QD<br>Continued on page 2<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. 

Original Instructions 14-Apr-26 

www.bannerengineering.com 

p/n: 49201 Rev E 

M18 Series Sensor 

**==> picture [500 x 383] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 1<br>Models Range Cable Output Type<br>M18SP6LP 2 m (6.5 ft)<br>PNP<br>M18SP6LPQ 4-pin M12 QD<br>Diffuse Mode (Infrared, 880 nm)<br>Models Range Cable Output Type<br>M18SN6D 2 m (6.5 ft)<br>NPN<br>M18SN6DQ 4-pin M12 QD<br>100 mm (4 in)<br>M18SP6D 2 m (6.5 ft)<br>PNP<br>M18SP6DQ 4-pin M12 QD<br>M18SN6DL 2 m (6.5 ft)<br>NPN<br>M18SN6DLQ 4-pin M12 QD<br>300 mm (12 in)<br>M18SP6DL 2 m (6.5 ft)<br>PNP<br>M18SP6DLQ 4-pin M12 QD<br>Fixed-Field Mode<br>Models Cutoff Point Cable Output Type<br>M18SN6FF25Q 4-pin M12 QD NPN<br>M18SP6FF25 25 mm (1 in) 2 m (6.5 ft)<br>PNP<br>M18SP6FF25Q 4-pin M12 QD<br>M18SN6FF50 2 m (6.5 ft)<br>NPN<br>M18SN6FF50Q 4-pin M12 QD<br>50 mm (2 in)<br>M18SP6FF50 2 m (6.5 ft)<br>PNP<br>M18SP6FF50Q 4-pin M12 QD<br>M18SN6FF100 2 m (6.5 ft)<br>NPN<br>M18SN6FF100Q 4-pin M12 QD<br>100 mm (4 in)<br>M18SP6FF100 2 m (6.5 ft)<br>PNP<br>M18SP6FF100Q 4-pin M12 QD<br>**----- End of picture text -----**<br>


The following models are no longer available for order but are still covered by the information in this document. 

- M18SN6FF25 

- Several 9 m cable (W/ 30) models 

## Fixed-Field Tips 

For highest sensitivity, the sensor-to-object distance should be such that the object will be sensed at or near the point of maximum excess gain. 

The background must be beyond the cutoff distance. Following these two guidelines makes it possible to detect objects of low reflectivity, even against close-in reflective backgrounds. 

In the drawings and discussion, E, R1, and R2 identify how the sensor’s three optical elements (Emitter “E”, Near Detector “R1”, and Far Detector “R2”) line up across the face of the sensor. In "Figure: Reflective Background - Problem" on page 3, "Figure: Reflective Background - Solution" on page 3, and "Figure: Object Beyond Cutoff - Problem" on page 3, these elements align vertically. In "Figure: Object Beyond Cutoff - Solution" on page 3, the elements align horizontally. 

Note how the position of the tabs on the front of the sensor helps to define the sensing axis of the sensor (Sensing Axis). The sensing axis becomes important in situations like those illustrated in "Figure: Object Beyond Cutoff - Problem" on page 3 and "Figure: Object Beyond Cutoff - Solution" on page 3. 

As a general rule, the most reliable sensing of an object approaching from the side occurs when the line of approach is parallel to the sensing axis. 

page 2 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

14-Apr-26 

M18 Series Sensor 

**==> picture [500 x 145] intentionally omitted <==**

**----- Start of picture text -----**<br>
Reflective Background - Problem<br>Sensing Axis Reflective Background - Solution<br>Fixed SensingField Fixed Sensing Cutoff<br>Cutoff Field Distance<br>Distance<br>Reflective<br>M18FF Sensor Background<br>M18FF Sensor<br>Core of<br>E EmittedBeam E Core ofEmittedBeam<br>R2R1 StrongDirect R2R1<br>Reflection<br>to R1 E = Emitter Strong<br>SensingAxis ER1 == EmitterNear Detector ReflectiveBackground R1R2 == Near DetectorFar Detector DirectReflectionAway From<br>R2 = Far Detector Sensor<br>E<br>R2<br>R1<br>**----- End of picture text -----**<br>


Background Reflectivity and Placement . Avoid mirror-like backgrounds that produce specular reflections. False sensor response will occur if a background surface reflects the sensor’s light more strongly to the near detector (R1) than to the far detector (R2). The result is a false ON condition ("Figure: Reflective Background - Problem" on page 3). Use of a diffusely-reflective (matte) background will cure this problem. Other possible solutions are to either angle the sensor or angle the background (in any plane) so that the background does not reflect back to the sensor ("Figure: Reflective Background - Solution" on page 3). 

An object beyond the cutoff distance, either moving or stationary (and when positioned as shown in "Figure: Object Beyond Cutoff - Problem" on page 3), can cause unwanted triggering of the sensor because it reflects more light to the near detector than to the far detector. Remedy the problem easily by rotating the sensor 90° ("Figure: Object Beyond Cutoff - Solution" on page 3) to align the sensing axis horizontally. The object then reflects the R1 and R2 fields equally, resulting in no false triggering. A better solution, if possible, may be to reposition the object or the sensor. 

Unwanted triggering of the sensor from an object beyond the cutoff can also be caused by attempting to sense a small object moving perpendicular to the sensor face, or by an object moving through the off-center position shown. Making the object larger, centering the sensor relative to the object, or rotating the sensor to place the sensing axis perpendicular to the longer dimension of the object ("Figure: Object Beyond Cutoff - Solution" on page 3) will solve the problem. 

**==> picture [500 x 207] intentionally omitted <==**

**----- Start of picture text -----**<br>
Object Beyond Cutoff - Problem<br>Fixed Sensing Reflective<br>Field<br>Background or Object Beyond Cutoff - Solution<br>Moving Object<br>Cutoff Fixed Sensing Cutoff<br>M18FF Sensor Distance Field Distance<br>E Reflective<br>Background<br>R2 M18FF Sensor or Moving<br>R1 Object<br>R2 Response E, R2, R1<br>E = Emitter<br>R1 = Near Detector R1 Response<br>R2 = Far Detector Area of R1 Response E = Emitter<br>R1 = Near Detector<br>Area of R2 Response R2 = Far Detector<br>Area of R1 and R2 Response Area of R1 and R2 Response<br>**----- End of picture text -----**<br>


## Wiring 

**==> picture [500 x 124] intentionally omitted <==**

**----- Start of picture text -----**<br>
NPN Standard PNP Standard Emitters Standard<br> bu (3) 10-30 V DC– bn (1) 10–30 V DC+ bn (1)<br>bn (1) + bu (3) – +<br>10–30 V DC<br>bk (4) Load Light operate bk (4) Load Light operate<br>bu (3)<br>wh (2) Load Dark operate wh (2) Load Dark operate –<br>Continued on page 4<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 3 of 8 

14-Apr-26 

M18 Series Sensor 

**==> picture [500 x 210] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 3<br>NPN Alarm Connections PNP Alarm Connections Emitter Alarm Connections<br>bn (1) – bu (3) + bn (1) +<br>bu (3) 10–30 V DC+ bn (1) 10–30 V DC– bu (3) 10–30 V DC−<br>bk (4) Load bk (4) Load bk (4)<br>not used<br>wh (2)<br>wh (2) Alarm Alarm wh (2) not used<br>4-pin M12 male QD<br>2 1<br>1. brown<br>2. white<br>3. blue<br>4. black<br>3 4<br>**----- End of picture text -----**<br>


## Specifications 

Supply Voltage 

10 to 30 V DC (10% maximum ripple) 

Supply Current (Exclusive of Load Current) Diffuse: 25 mA Fixed-field: 35 mA Opposed Mode Emitters: 25 mA Opposed Mode Receivers: 20 mA Retroreflective, Non-Polarized: 25 mA Retroreflective, Polarized: 30 mA 

## Supply Protection Circuitry 

Protected against reverse polarity and transient voltages 

Indicators 

Two LEDs (green and yellow) 

Green solid: power to the sensor is ON 

Green flashing: output is overloaded Amber solid: normally open output is conducting Amber flashing: excess gain marginal (1-1.5×) in light condition 

Construction 

Housings: Stainless Steel 

Lenses: Lexan® (opposed models) or acrylic 

## Connections 

2 m (6.5 ft) unterminated 4-wire PVC-jacketed cable, 9 m (30 ft) unterminated 4-wire PVC-jacketed cable, or Integral 4-pin M12 male quick-disconnect connector 

## Configuration 

SPDT (complementary) solid-state DC switch; choose NPN (current sinking) or PNP (current sourcing) models. Light operate: Normally open output conducts when the sensor sees its own (or the emitter’s) modulated light Dark operate: Normally closed output conducts when the sensor sees dark; the normally closed output may be wired as a normally open alarm output, depending upon connection to the power supply (U.S. patent 5087838) 

## Output Rating 

150 mA maximum (each) in standard wiring; When wired for alarm output, the total load may not exceed 150 mA 

OFF-State Leakage Current: < 1 microamp at 30 V DC ON-State Saturation Voltage: < 1V at 10 mA dc; < 1.5 V at 150 mA DC 

## Output Protection Circuitry 

Protected against false pulse on power-up and continuous overload or short circuit of outputs 

## Output Response Time 

Opposed mode: 3 milliseconds ON, 1.5 milliseconds OFF 

Polarized Retro, Non-polarized Retro, Fixed-field, and Diffuse: 3 milliseconds ON and OFF 

NOTE: 100 millisecond delay on power-up; outputs do not conduct during this time 

## Repeatability 

Opposed mode: 375 microseconds 

Polarized Retro, Non-Polarized Retro, Fixed-field and Diffuse modes: 750 microseconds 

Repeatability and response are independent of signal strength 

## Rating 

Leakproof design rated NEMA 6P, IP69K* (DIN 40050) 

* Cabled models meet IP69K if the cable is protected from high-pressure spray 

## Vibration and Mechanical Shock 

All models meet Mil. Std. 202F requirements. 

Method 201A (Vibration; frequency 10 to 60 Hz, max., double amplitude 0.06" acceleration 10G). 

Method 213B conditions H&I (Shock: 75G with unit operating; 100G for non-operation) 

## Operating Conditions 

–40 °C to +70 °C (–40 °F to +158 °F) 

90% at +50 °C maximum relative humidity (non-condensing) 

page 4 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

14-Apr-26 

M18 Series Sensor 

## Dimensions 

**==> picture [431 x 201] intentionally omitted <==**

**----- Start of picture text -----**<br>
Models with Attached Cable<br>Amber LED Models with 4-pin M12 Quick Disconnect<br>output indicator<br>Amber LED<br>Green LED<br>Jam nuts output indicator<br>2 m (2 provided) power indicator<br>(6.5 ft) Cable<br>M18 x 1 mm<br>Green LED thread<br>power indicator<br>37.0 mm<br>59.2 mm*<br>[1.46"] 78.0 mm*<br>[2.33"]<br>[3.07"]<br>* Polarized retroreflective and fixed-field cabled models = 65.0 mm  * Polarized retroreflective and fixed-field QD models = 83.8 mm<br>(3.30 in)<br>**----- End of picture text -----**<br>


* Polarized retroreflective and fixed-field QD models = 83.8 mm (3.30 in) 

* Polarized retroreflective and fixed-field cabled models = 65.0 mm (2.56 in) 

## Performance Curves 

The excess gain curves above show excess gain vs. sensing distance for M18 Series fixed-field sensors with 25-, 50- and 100-millimeter cutoffs. Maximum excess gain for the 25-mm models occurs at a lens-to-object distance of about 7 mm; for the 50-mm models, at about 10 mm; and for the 100-mm models, at about 20 mm. Sensing at or near these distances will make maximum use of each sensor’s available sensing power. Backgrounds and background objects must always be placed beyond the cutoff distance. 

These excess gain curves were generated using a white test card of 90% reflectance. Objects with reflectivity of less than 90% reflect less light back to the sensor, and thus require proportionately more excess gain in order to be sensed with the same reliability as more reflective objects. When sensing an object of very low reflectivity, it may be important to sense it at or near the distance of maximum excess gain. 

The effects of object reflectivity on cutoff distance, though small, may be important for some applications. Sensing of objects of less than 90% reflectivity causes the cutoff distances to be “pulled” slightly closer to the sensor. For example, an excess gain of 1 for an object that reflects 1/10 as much light as the 90% white card is represented by the heavy horizontal graph line at excess gain = 10. An object of this reflectivity results in far limit cutoffs of approximately 20, 40 and 70 mm (for 25-, 50- and 100-mm cutoff models, respectively). 

Objects with reflectivity greater than 90% return more light to the sensor. For this reason, highly reflective backgrounds or background objects such as mirrors, polished metal, and other sources of specular reflections require special consideration. To use a highly reflective background, place it as far beyond the cutoff distance as possible and angle it to direct reflected light away from the sensor. 

## Opposed-Mode Emitter (E) and Receiver (R) 

**==> picture [500 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
1000<br>M18 Series<br>M18 Series<br>Opposed Mode 1500 mm 60 in<br>Opposed Mode<br>1000 mm 40 in<br>100<br>500 mm 20 in<br>0 0<br>500 mm 20 in<br>10<br>1000 mm 40 in<br>1500 mm 60 in<br>1 0 5 m 10 m 15 m 20 m 25 m<br>.1 m 1 m 10 m 100 m 16 ft 32 ft 49 ft 66 ft 82  ft<br>.33 ft 3.3 ft 33 ft 330 ft<br>Distance<br>Distance<br>Excess Gain<br>Beam Pattern<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 5 of 8 

14-Apr-26 

M18 Series Sensor 

## Retroreflective Mode 

**==> picture [500 x 435] intentionally omitted <==**

**----- Start of picture text -----**<br>
1000 1000<br>M18 Series M18 Series<br>Non-Polarized Retro Polarized Retro<br>120 mm Non-Polarized RetroM18 Series 4.7 in 150 mm M18 SeriesPolarized Retro 6 in<br>100 100 80 mm 3.2 in 100 mm 4 in<br>40 mm 1.6 in 50 mm 2 in<br>with BRT-3 Reflector 0 with BRT-3 Reflector 0 0 with BRT-3 Reflector 0<br>with BRT-3 Reflector 40 mm 1.6 in 50 mm 2 in<br>10 10 80 mm 3.2 in 100 mm 4 in<br>120 mm 4.7 in 150 mm 6 in<br>0 .5 m 1.0 m 1.5 m 2.0 m 2.5 m 0 .5 m 1.0 m 1.5 m 2.0 m 2.5 m<br>1 1 1.6 ft 3.2 ft 4.8 ft 6.4 ft 8.0  ft 1.6 ft 3.2 ft 4.8 ft 6.4 ft 8.0  ft<br>.01 m .1 m 1 m 10 m .01 m .1 m 1 m 10 m Distance Distance<br>.033 ft .33 ft 3.3 ft 33 ft .033 ft .33 ft 3.3 ft 33 ft<br>Distance Distance<br>Diffuse Mode<br>1000 1000<br>M18 Series M18 Series<br>Short RangeDiffuse Mode Diffuse ModeLong Range 15 mm M18 Series 0.6 in 15 mm Long Range DiffuseM18 Series 0.6 in<br>Short Range Diffuse<br>100 100 Maximum Gain 10 mm 0.4 in 10 mm 0.4 in<br>5 mm 0.2 in 5 mm 0.2 in<br>Maximum Gain 0 0 0 0<br>5 mm 0.2 in 5 mm 0.2 in<br>10 10 10 mm 0.4 in 10 mm 0.4 in<br>15 mm 0.6 in 15 mm 0.6 in<br>Minimum Gain Minimum Gain<br>0 25 mm 50 mm 75 mm 100 mm 125 mm 0 80 mm 160 mm 240 mm 320 mm 400 mm<br>1 1 1 in 2 in 3 in 4 in 5 in 3 in 6 in 9 in 12 in 15 in<br>1 mm 10 mm 100 mm 1000 mm 1 mm 10 mm 100 mm 1000 mm Distance Distance<br>.04 in .4 in 4 in 40 in .04 in .4 in 4 in 40 in<br>Distance Distance<br>Fixed-Field Mode<br>1000 1000 1000<br>M18 Series M18 Series M18 Series<br>Fixed-field mode Fixed-field mode Fixed-field mode<br>with 25 mm far with 50 mm far with 100 mm far<br>limit cutoff limit cutoff limit cutoff<br>100 100 100<br>10 10 10<br>1 1 1<br>.1 mm 1 mm 10 mm 100 mm .1 mm 1 mm 10 mm 100 mm .1 mm 1 mm 10 mm 100 mm<br>.004 in .04 in .4 in 4 in .004 in .04 in .4 in 4 in .004 in .04 in .4 in 4 in<br>Distance Distance Distance<br>Excess Gain Excess Gain Beam Pattern Beam Pattern<br>Excess Gain Excess Gain Beam Pattern Beam Pattern<br>Excess Gain Excess Gain Excess Gain<br>**----- End of picture text -----**<br>


## Accessories 

## Cordsets 

**==> picture [500 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-Pin Single-Ended M12 Female Cordsets<br>Model Length Style Dimensions Pinout (Female)<br>MQDC-406 2 m (6.56 ft) 44 Typ.<br>MQDC-415 5 m (16.4 ft)<br>1 = Brown<br>MQDC-430 9 m (29.5 ft) 1 2 2 = White<br>M12 x 1 3 = Blue<br>Straight ø 14.5 5 4 = Black5 = Not used<br>Ø5.2 mm 4 3<br>MQDC-450 15 m (49.2 ft)<br>7 mm<br>58 mm<br>Continued on page 7<br>**----- End of picture text -----**<br>


page 6 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

14-Apr-26 

M18 Series Sensor 

**==> picture [500 x 174] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 6<br>4-Pin Single-Ended M12 Female Cordsets<br>Model Length Style Dimensions Pinout (Female)<br>MQDC-406RA 2 m (6.56 ft) 32 Typ.<br>[1.26"]<br>MQDC-415RA 5 m (16.4 ft)<br>MQDC-430RA 9 m (29.5 ft)<br>30 Typ. 2<br>[1.18"] 3<br>1<br>Right-Angle 4<br>M12 x 1<br>ø 14.5 [0.57"]<br>MQDC-450RA 15 m (49.2 ft)<br>Ø5.2 mm<br>7 mm<br>58 mm<br>**----- End of picture text -----**<br>


## Mounting Brackets 

All measurements are listed in millimeters, unless noted otherwise. The measurements provided are subject to change. 

**==> picture [429 x 455] intentionally omitted <==**

**----- Start of picture text -----**<br>
• Right-angle mounting bracket with a curved slot for versatile orientation 30<br>• 12-ga. stainless steel<br>• 18 mm sensor mounting hole C 41<br>• Clearance for M4 (#8) hardware A B<br>• CAD Files: DXF, PDF, IGS, STP<br>46<br>Hole center spacing:  A to B = 24.2<br>A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5<br>40<br>• 18 mm split clamp, black thermoplastic polyester A<br>• Stainless steel mounting hardware included 45<br>• CAD Files: DXF, PDF, IGS, STP B<br>A = ø 3 mm (2)<br>B = ø 18 mm 13<br>51<br>• 18 mm swivel bracket with M18 × 1 internal thread<br>B<br>• Black thermoplastic polyester<br>• Stainless steel swivel locking hardware included 42<br>• CAD Files: DXF, PDF, IGS, STP<br>Hole center spacing:  A = 36.0<br> A = ø 5.3, B = ø 18.0 25 A<br>C<br>• 2-piece universal swivel bracket<br>• 300 series stainless steel<br>• Stainless steel swivel locking hardware included A<br>• Mounting hole for 18 mm sensor 137<br>• CAD Files: DXF, PDF, IGS, STP B<br>Hole center spacing:  A = 25.4, B = 46.7<br> B = 6.9 × 32.0, C = ø 18.3 64 42<br>68<br>• Flat-mount swivel bracket with extended range of motion A<br>• Black reinforced thermoplastic polyester and 316 stainless steel B<br>• Stainless steel swivel locking hardware included 57<br>• CAD Files: DXF, PDF, IGS, STP<br>Hole center spacing:  A=50.8 78<br> A=ø 7, B=ø 18<br>**----- End of picture text -----**<br>


## SMB18A 

Hole center spacing: A to B = 24.2 Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5 

## SMB18C 

A = ø 3 mm (2) Hole size: B = ø 18 mm 

## SMB18SF 

Hole center spacing: A = 36.0 Hole size: A = ø 5.3, B = ø 18.0 

## SMB18UR 

Hole center spacing: A = 25.4, B = 46.7 Hole size: B = 6.9 × 32.0, C = ø 18.3 

## SMB30SK 

Hole center spacing: A=50.8 Hole size: A=ø 7, B=ø 18 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 7 of 8 

14-Apr-26 

M18 Series Sensor 

## Aperture Kits 

**==> picture [168 x 126] intentionally omitted <==**

**----- Start of picture text -----**<br>
NOTE:  Aperture adds 3/16" to sensor length.<br>Aperture styles<br>eo<br>Round Rectangular<br>Aperture<br>(Rectangular type shown)<br>Lens<br>Housing O-ring (2)<br>22.4 mm<br>(0.88") 12.7 mm<br>Outside Diameter (0.50")<br>**----- End of picture text -----**<br>


## AP18SC Aperture Kit 

Kit includes black acetal round apertures of 0.5 mm (0.02 in), 1 mm (0.04 in), and 2.5 mm (0.10 in) diameter. Each kit also includes a thread-on aperture housing, a Teflon FEP® lens, and two 0-rings. 

Used with S18, M18. 

## AP18SR Aperture Kit 

Kit includes black acetal rectangular apertures of 0.5 mm (0.02 in) wide, 1.0 mm (0.04 in) wide, and 2.5 mm (0.10 in) wide. Each kit also includes a thread-on aperture housing, a Teflon FEP® lens, and two 0-rings. 

Used with S18, M18. 

## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

page 8 of 8 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

14-Apr-26