M18GRY2PQ

EZ-LIGHT® Indicators for 3-Color, 7-Function 

## Features 

DC-operated LED indicators with solid ON or flashing capability and an integral M12 quick-disconnect connector[(1)] 

Choose from red, yellow, or green ON, flashing, or rotating (depending on wiring)[(2)] . 

To view or download the latest technical information about this product, including specifications, dimensions, accessories, and wiring, go to www.bannerengineering.com. 

- WARNING: • Do not use this device for personnel protection • Using this device for personnel protection could result in serious injury or death. • This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or deenergized (off) output condition. 

## Models 

**==> picture [397 x 216] intentionally omitted <==**

**----- Start of picture text -----**<br>
Models Construction Inputs<br>M18GRY2PQ PNP<br>Nickel-plated brass housing, M18x1 thread; thermoplastic diffuser. Fully<br>M18GRY2NQ encapsulated; IP67. NPN<br>K50LGRY2PQ PNP<br>30 mm threaded polycarbonate base, translucent polycarbonate dome. Fully<br>K50LGRY2NQ encapsulated; IP67, IP69K per ISO 20653. NPN<br>K50FLGRY2PQ PNP<br>Polycarbonate base, translucent polycarbonate dome. Fully encapsulated;<br>K50FLGRY2NQ IP67, IP69K per ISO 20653. NPN<br>K80LGRY2PQ  [(3)] PNP<br>ABS and polycarbonate base, translucent polycarbonate dome. Electronics fully<br>K80LGRY2NQ encapsulated; IP67. NPN<br>**----- End of picture text -----**<br>


The following models are no longer available for order but are still covered by the information in this document. 

**==> picture [397 x 44] intentionally omitted <==**

**----- Start of picture text -----**<br>
Models Construction Inputs<br>T30GRY2PQ PNP<br>Thermoplastic polyester housing, thermoplastic diffuser. Fully encapsulated;<br>T30GRY2NQ IP67. NPN<br>**----- End of picture text -----**<br>


Other Models: Standard integral quick-disconnect connector models are listed (mating cordset required). To order 2 m (6.5 ft) cabled models, omit suffix Q from model number (example, M18GRY2P). To order models with 150 mm (6 in) PVC-jacketed cable with 5-pin M12 quick-disconnect connector, replace suffix Q with QP (example, M18GRY2PQP). 

## Wiring 

Select from 7 operating schemes, depending on wiring 

|LED Function|PNP Models|PNP Models|PNP Models|PNP Models|NPN Models|NPN Models|NPN Models|NPN Models|
|---|---|---|---|---|---|---|---|---|
||Brown Wire|White Wire|Black Wire|Blue Wire|Blue Wire|White Wire|Black Wire|Brown Wire|
|Red ON|+V DC|||0 V DC|0 V DC|||+V DC|
|Red Flashing|+V DC||+V DC|0 V DC|0 V DC||0 V DC|+V DC|
|Yellow ON||+V DC||0 V DC||0 V DC||+V DC|



(1) Pin 5 is not used; connects to 4-wire quick-disconnect cordset. If a cordset other than those specified in this document is used, use a 5-pin mating cordset. 

(2) Contact Factory for other colors/color combinations, including: blue, white, orange. 

(3) K80L Models: Standard integral 5-pin M12 quick-disconnect connector models are listed (mating cordset required). For terminal-wired model, omit suffix Q (example, K80LGRY2P). 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

Original Instructions 19-Jun-25 

p/n: 121902 Rev. L 

EZ-LIGHT® Indicators for 3-Color, 7-Function 

**==> picture [526 x 132] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||
|---|---|---|---|---|---|---|---|---|
|Continued from page 1|
|PNP Models|NPN Models|
|LED Function|
|Brown Wire|White Wire|Black Wire|Blue Wire|Blue Wire|White Wire|Black Wire|Brown Wire|
|Yellow Flashing|+V DC|+V DC|0 V DC|0 V DC|0 V DC|+V DC|
|Green ON|+V DC|0 V DC|0 V DC|+V DC|
|Green Flashing|+V DC|+V DC|0 V DC|0 V DC|0 V DC|+V DC|
|Rotating Red-Green-|+V DC|+V DC|+V DC|0 V DC|0 V DC|0 V DC|0 V DC|+V DC|
|Yellow|
|Only quick-disconnect wiring is shown; cabled wiring is functionally identical.|
|PNP Models|NPN Models|

**----- End of picture text -----**<br>


Only quick-disconnect wiring is shown; cabled wiring is functionally identical. 

G = Green R = Red Y = Yellow X = Not Used 

## Specifications 

Supply Voltage and Current 

M18 Models: 10 V DC to 30 V DC at 40 mA max. 

T30 Models: 10 V DC to 30 V DC at 50 mA max. 

K50L, K50FL and K80L Models: 18 to 30 V DC at 50 mA max. 

Indicators 

Entire translucent diffuser or dome provides indication. LEDs are independently selected: Green, Red, Yellow, ON steady or flashing. For other colors/combinations, contact Factory for availability 

Connections 

K80L Models: Integral 5-pin M12 male quick-disconnect connector standard. Terminal-wired models available for use with bulk cable; compression fitting optional. Contact Factory for cable information. Other Models: Integral 5-pin M12 male quick-disconnect connector (Q); 150 mm (6 in) PVC-jacketed cable with a 5-pin M12 male quickdisconnect connector (QP), (do not use center pin 5); or 2 m (6.5 ft) unterminated 5-wire PVC-jacketed cable 

Operating Conditions 

Temperature: –40 °C to +50 °C (–40 °F to +122 °F) 

Input Response Time 

Indicator ON: 250 ms (max.) Indicator OFF: 10 ms (max.) 

## Indicator Flash Rate 

Single Color: 1 second flash rate (500 ms ON) Three Color: 1.5 second rotation rate (500 ms per color) 

Environmental Rating 

Rated IP67. K80L has encapsulated electronics only; other models fully encapsulated. 

- K50L, and K50FL quick-disconnect models meet IP69K per ISO 20653 

Cabled models also meet IP69K if the cable and cable entrance are protected from high-pressure spray. 

## Certifications 

All models: 

Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM 

## K50L, K50FL, and T30 models only: 

Turck Banner LTD Blenheim House Blenheim Court Wickford, Essex SS11 8YT GREAT BRITAIN 

**==> picture [42 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
K50L models only:<br>**----- End of picture text -----**<br>


## Required Overcurrent Protection 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. 

For additional product support, go to www.bannerengineering.com. 

**==> picture [140 x 57] intentionally omitted <==**

**----- Start of picture text -----**<br>
Supply  Supply<br>Required Overcurrent  Required Overcurrent<br>Wiring  Wiring<br>Protection (A) Protection (A)<br>(AWG) (AWG)<br>20 5.0 26 1.0<br>22 3.0 28 0.8<br>24 1.0 30 0.5<br>**----- End of picture text -----**<br>


page 2 

19-Jun-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

EZ-LIGHT® Indicators for 3-Color, 7-Function 

Dimensions 

**==> picture [544 x 371] intentionally omitted <==**

**----- Start of picture text -----**<br>
M18 Models T30 Models K50L Models<br>Ø16.5 mm<br>(0.65") 50.0 mm (1.97")<br>Ø 40.0 mm<br>(1.57")<br>63.7 mm<br>61 mm (2.4")  M30 x 1.5Thread (2.51") (mounting nut M30 x 1.5  38 mm (1.50")*<br>included)<br>30 mm  Max. Torque 4.5 Nm<br>(1.2") 45.0 mm (40 in-lbf) 20 mm (0.79")<br>M12 X 1 (1.77")<br>Internal Threads<br>Ø 15 mm Max. Torque 2.25 Nm½ - 14 NPSM  11 mm (0.43")<br>(0.59") (20 in-lbf)<br>M18 X 1 23 mm<br>M12 X 1 (0.9")<br>K50FL Models K80L Models<br>44.6 [1.76"]<br>80.8 mm<br>(3.18")<br>Ø50 [1.97"]<br>65.0 mm(2.56") 66.3 mm(2.61") 109.5 mm(4.31")<br>60.0<br>[2.36"]<br>35.0<br>[1.38"] 65.0 mm<br>(2.56")<br>2x 5.0 [0.20"]<br>16.0 [0.63"] 2x 5.5 [0.21"] Internal Threads ½ - 14 NPSM<br>2x 5.0 [0.20"] 17.0 [0.67"] Max. Torque 1.12 Nm (10 in–lbf) 4X Ø 5.5 mm (Ø 0.22") with supplied screws 26.0 mm Max. Torque 2.25 Nm (20 in–lbf)<br>40.0 [1.58"] (1.02")<br>4X 8–32 UNC  M12 X 1<br>Max. Torque 1.12 Nm (10 in–lbf)<br>**----- End of picture text -----**<br>


## Accessories 

## Cordsets 

**==> picture [544 x 270] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-Pin Single-Ended M12 Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC-406 2 m (6.56 ft)  44 Typ.<br>MQDC-415 5 m (16.4 ft)<br>MQDC-430 9 m (29.5 ft)  2<br>M12 x 1 1<br>Straight  ø 14.5 3<br>Ø5.2 mm 4 5<br>MQDC-450 15 m (49.2 ft)<br>7 mm<br>58 mm 1 = Brown<br>2 = White<br>3 = Blue<br>MQDC-406RA 2 m (6.56 ft)  32 Typ. 4 = Black<br>[1.26"] 5 = Not used<br>MQDC-415RA 5 m (16.4 ft)<br>MQDC-430RA 9 m (29.5 ft)<br>30 Typ. 2<br>[1.18"] 3<br>1<br>Right-Angle  4<br>M12 x 1<br>MQDC-450RA 15 m (49.2 ft)  ø 14.5 [0.57"]<br>Ø5.2 mm<br>7 mm<br>58 mm<br>**----- End of picture text -----**<br>


To order bulk cable for terminal-wired K80L models, contact the factory. If cables other than those listed are used, use a 5-pin mating cable. 

19-Jun-25 

page 3 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

EZ-LIGHT® Indicators for 3-Color, 7-Function 

## Brackets 

For use with M18 and T18 models or base-mount T30 models: 

- 30 

- • Right-angle mounting bracket with a curved slot for versatile orientation • 12-ga. stainless steel C 41 • 18 mm sensor mounting hole A B • Clearance for M4 (#8) hardware 46 

## SMB18A 

Hole center spacing: A to B = 24.2 Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5 

Other available 18 mm dia. brackets: 

- SMB1815SF SMB18Q SMB18SF SMB312PD SMBAMS18RA SMBAMS18P 

## For use with T30 models or base-mount K50L models: 

SMB30A 

- 45 C 

- • Right-angle bracket with curved slot for versatile orientation 61 • Clearance for M6 (¼ in) hardware • Mounting hole for 30 mm sensor B • 12-ga. stainless steel A 69 

Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5 

- Other available 30 mm diameter brackets are: SMBAMS30RA SMBAMS30P SMB30SC SMB30SC SMB30MM SMB3018SC 

K50FL models include a 48 mm (1.9 inch) circular velcro mounting kit for easy mounting with no additional hardware: 

- SMBDX80DIN • Black reinforced thermoplastic • Bracket for mounting on a 35 mm DIN rail 

**==> picture [38 x 42] intentionally omitted <==**

**----- Start of picture text -----**<br>
89<br>89<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

19-Jun-25 

page 4 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com