LUTM-UP817A1P

LUTM-UP817A1P LUTM 

**LUMINESCENCE SENSORS** 

**LUTM-UP817A1P | LUTM** LUMINESCENCE SENSORS 

**==> picture [96 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ordering information<br>**----- End of picture text -----**<br>


**Type Part no.** ~~|~~ LUTM-UP817A1P 1087463 Other models and accessories www.sick.com/LUTM 

Illustration may differ 

Detailed technical data 

## Features 

|**Dimensions (W x H x D)**|12 mm x 31.5 mm x 21 mm|
|---|---|
|**Sensing distance**|≤ 12.5 mm1)|
|**Housing design**|Small|
|**Working range**|8 mm ... 20 mm|
|**Light source**|LED, UV2)|
|**Wave length**|370 nm|
|**Light emission**|Long side|
|**Light spot size**|2 mm x 2.5 mm3)|
|**Light spot direction**|Vertical|
|**Receiving range**|450 nm ... 750 nm|
|**Adjustment**|Cable, IO-Link|
|**Teach-in mode**|2-point teach-in static/dynamic|
|**Output function**|Light/dark switching4)|



- 1) From leading edge of lens. 

- 2) Average service life: 100,000 h at TU = +25 °C. 

- 3) At sensing distance. 

- 4) L/D switching via teach-in. 

**Product data sheet | 2023-10-31 09:58:37 Subject to change without notice** 

**2** 

**LUMINESCENCE SENSORS | SICK** 

**LUTM-UP817A1P | LUTM** LUMINESCENCE SENSORS 

## Mechanics/electronics 

|**Supply voltage**|12 V DC ... 24 V DC1)|
|---|---|
|**Ripple**|≤ 5 Vpp 2)|
|**Current consumption**|≤ 50 mA3)|
|**Switching frequency**|6 kHz4)|
|**Response time**|80 µs5)|
|**Jitter**|40 µs|
|**Switching output**|PNP|
|**Switching output (voltage)**|PNP: HIGH = UV≤ 2 V / LOW approx. 0 V|
|**Switching mode**|Light/dark switching|
|**Output current Imax.**|< 100 mA6)|
|**Connection type**|Male connector M8, 4-pin|
|**Protection class**|III|
|**Circuit protection**|UVconnections, reverse polarity protected<br>Output Q short-circuit protected<br>Interference pulse suppression|
|**Enclosure rating**|IP67|
|**Weight**|70 g|
|**Housing material**|Plastic, ABS|



- 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A. 

- 2) May not exceed or fall below Uv tolerances. 

- 3) Without load. 

- 4) With light/dark ratio 1:1. 

- 5) Signal transit time with resistive load. 

- 6) At supply voltage > 24 V, Imax = 30 mA. Imax is consumption count of all Qn. 

## Communication interface 

|**IO-Link**|✔, IO-Link V1.1|
|---|---|
|VendorID|26|
|DeviceID HEX|800072|
|DeviceID DEC|8388722|
|**Cycle time**|2.3 ms|
|**Process data structure A**|Bit 0 = switching signal QL1<br>Bit 1 = Quality of Run Alarm<br>Bit 2 = Teach successful<br>Bit 3 = Teach busy<br>Bit 4 ... 15 = empty|
|**Process data structure B**|Bit 0 = switching signal QL1<br>Bit 1 = Quality of Run Alarm<br>Bit 2 = Teach successful<br>Bit 3 = Teach busy<br>Bit 4 ... 15 = empty<br>Bit 6 ... 15 = measuring value|
|Ambient data||
|**Ambient operating temperature**|–10 °C ... +55 °C|
|**Ambient temperature, storage**|–20 °C ... +75 °C|
|**Shock load**|According to IEC 60068|



**2023-10-31 09:58:37 | Product data sheet Subject to change without notice** 

**LUMINESCENCE SENSORS | SICK** 

**3** 

**LUTM-UP817A1P | LUTM** LUMINESCENCE SENSORS 

## **UL File No.** 

NRKH.E348498 & NRKH7.E348498 

## Classifications 

|**eCl@ss 5.0**|27270908|
|---|---|
|**eCl@ss 5.1.4**|27270908|
|**eCl@ss 6.0**|27270908|
|**eCl@ss 6.2**|27270908|
|**eCl@ss 7.0**|27270908|
|**eCl@ss 8.0**|27270908|
|**eCl@ss 8.1**|27270908|
|**eCl@ss 9.0**|27270908|
|**eCl@ss 10.0**|27270908|
|**eCl@ss 11.0**|27270908|
|**eCl@ss 12.0**|27270908|
|**ETIM 5.0**|EC001822|
|**ETIM 6.0**|EC001822|
|**ETIM 7.0**|EC001822|
|**ETIM 8.0**|EC001822|
|**UNSPSC 16.0901**|39121528|



Dimensional drawing (Dimensions in mm (inch)) 

**==> picture [272 x 202] intentionally omitted <==**

**----- Start of picture text -----**<br>
12 0.5 21<br>(0.47) (0.02) (0.83) 3<br>4<br>aa | ‘am<br>2<br>1<br>3<br>3<br>(0.12)<br>9.7<br>- if<br>(0.38)<br>0.9<br>(0.04)<br>0.5<br>(0.02)<br> (1.00) 1.12)( 1.24)(<br>9<br>(0.35)<br>25.4 28.5  31.5<br>9.7<br>(0.38)<br>11.5 (0.45)<br>**----- End of picture text -----**<br>


① Center of optical axis, sender 

- ② Center of optical axis, receiver 

③ Mounting holes M3 

- ④ Display and adjustment elements 

**4** 

**Product data sheet | 2023-10-31 09:58:37 Subject to change without notice** 

**LUMINESCENCE SENSORS | SICK** 

**LUTM-UP817A1P | LUTM** LUMINESCENCE SENSORS 

## Adjustments 

Display and adjustment elements 

**==> picture [65 x 108] intentionally omitted <==**

**----- Start of picture text -----**<br>
2 3<br>1<br>①   Teach-in button<br>②   LED yellow<br>③   LED green<br>**----- End of picture text -----**<br>


## Connection diagram 

## Cd-309 

BN 1 + (L+) WH 2 Q BU 3 **-** (M) BK 4 Q/C 

**2023-10-31 09:58:37 | Product data sheet Subject to change without notice** 

**LUMINESCENCE SENSORS | SICK** 

**5** 

**LUTM-UP817A1P | LUTM** LUMINESCENCE SENSORS 

## Concept of operation 

Setting the switching threshold (dynamic) 

**1. Position background 2. Move at least the fluorecent mark and background using the light spot.** 

Press the teach-in button and Keep the teach-in button keep it pressed. LED flashing > 3 < 30 s pressed. slowly. 

Release the teach-in button. 

Yellow LED will illuminate, when emitted light is on the fluorecent mark. 

## **Sensitivity setting** 

Signal strength 1st press Mark signal of button Switching threshold 2nd press Background signal of button ~~A~~ t 

## **Switching characteristics** 

Static teach-in: light/dark setting is defined using teach-in sequence. Dynamic teach-in: switching output active on fluorecent mark, if background is longer in the field of view during the teach-in. The switching threshold is set automatically between the background and the mark. 

Teach-in can also be performed using an external control signal (only dynamic teach-in). 

Keylock activation and deactivation: hold down teach-in button > 30 s. 

Teach-in failure: yellow LED indicator and the transmitted light of the sensor flashing quickly. For dynamic teach-in with ET signal (5 Hz) via switching output Q. 

Setting the switching threshold (static) 

**1. Position fluorecent mark 2. Position background** 

**==> picture [212 x 27] intentionally omitted <==**

**----- Start of picture text -----**<br>
Press and hold teach-in   Press and hold teach-in<br>button > 1 < 3 s. button < 3 s.<br>Yellow LED flashes slowly. Yellow LED goes out.<br>**----- End of picture text -----**<br>


**6 LUMINESCENCE SENSORS | SICK** 

**Product data sheet | 2023-10-31 09:58:37 Subject to change without notice** 

**LUTM-UP817A1P | LUTM** LUMINESCENCE SENSORS 

## Sensing distance 

**==> picture [399 x 254] intentionally omitted <==**

**----- Start of picture text -----**<br>
Relative sensitivity in %<br>120 % [ J Jf J J fF J fo py fy pp pp pp pp pp<br>pf | ft fy py fy pp<br>} | | Jf | | f tf fT ft fy ft fy ft ft<br>} | | | | | | | | | | tf | | tf f | tf ft ty ft tt<br>100 % pot ft ft tT |<br>A<br>pj | Jf J | J fT Tg fT UR<br>poof ft yf fy ge<br>po | | | | fF | | pf | cP cP Um<br>80 % A<br>pf | J fy PT<br>| {| ft J fp Tt<br>| | | yf<br>60 % poj fp<br>poofpoof f| t | | | e<br>pf |ffAD<br>ty<br>p | | | | | ft poypy ft<br>40 % a a a a ee A ee a ee Pe a ee ee as ee ee ee, ee<br>p}op AR<br>} | | | | || gywe| | ff t ytfy fytyyy<br>pj | | | ym fy fy tp<br>20 % po | | | | wt<br>p | | | | gm fT ft ff<br>} | | | wm | tT TT<br>0 % [emer TTTT<br>0 5 10 15 20 25<br>(0.20) (0.39) (0.59) (0.79) (0.89)<br>Sensing distance in mm (inch)<br>**----- End of picture text -----**<br>


## Recommended accessories 

> Other models and accessories > www.sick.com/LUTM 

||**Brief description**|**Type**|**Part no.**|
|---|---|---|---|
|Cloning module<br>~~[~~<br>~~el~~||||
|~~el~~<br>||IO-Link version V1.1, Port class 2, PIN 2, 4, 5 galvanically connected, Supply voltage<br>18 V DC ... 32 V DC (limit values, operation in short-circuit protected network max. 8 A)<br>||IOLP2ZZ-M3201<br>(SICK Memory Stick)<br>~~[~~|1064290<br>~~[~~|
|~~el~~|IO-Link V1.1 Class A port, USB2.0 port, optional external power supply 24V / 1A|IOLA2US-01101<br>(SiLink2 Master)<br>~~[~~|1061790<br>~~[~~|
|Mounting brackets and plates<br>~~[~~||||
|—|Stainless steel (1.4301)|BEF-WN-G6<br>~~[~~|2062909<br>~~[~~|
|Plug connectors and cables<br>~~[~~||||
||Head A: female connector, M8, 4-pin, straight, A-coded<br>Head B: Flying leads<br>Cable: Sensor/actuator cable, PVC, unshielded, 5 m|YF8U14-<br>050VA3XLEAX|2095889|
||Head A: male connector, M8, 4-pin, straight<br>Cable: unshielded|STE-0804-G|6037323|



**2023-10-31 09:58:37 | Product data sheet Subject to change without notice** 

**LUMINESCENCE SENSORS | SICK** 

**7** 

**LUTM-UP817A1P | LUTM** LUMINESCENCE SENSORS 

- **Brief description Type Part no.** 

- Sensor Integration Gateway • **Further functions:** Web server integrated, USB connection for easy configuration of SIG200-0A0412200 1089794 the SIG200 Sensor Integration Gateway with SOPAS ET, the engineering tool from SICK, logic editor is available for easy configuration of logic functions 

- • **Connection CONFIG:** 1 x M8, 4-pin female connector, USB 2.0 (USB-A) • **Logic editor:** yes • **Communication interface:** IO-Link, USB, Ethernet, PROFINET, REST API • **Product category:** IO-Link Master • **Further functions:** Web server integrated, USB connection for easy configuration of SIG200-0A0G12200 1102605 the SIG200 Sensor Integration Gateway with SOPAS ET, the engineering tool from SICK, logic editor is available for easy configuration of logic functions 

- • **Connection CONFIG:** 1 x M8, 4-pin female connector, USB 2.0 (USB-A) • **Logic editor:** yes • **Communication interface:** IO-Link, USB, Ethernet, REST API • **Product category:** IO-Link Master 

- ~~: i~~ 

||**Type**|**Part no.**|
|---|---|---|
|Function Block Factory|||
|• **Description:**The Function Block Factory supports common programmable logic controllers<br>(PLCs) from various manufacturers, such as Siemens, Beckhoff, Rockwell Automation and<br>B&R. More information on the FBF can be found <a href=https://fbf.cloud.sick.com tar-<br>get="_blank"> here</a>.|Function Block Factory|On request|



**Product data sheet | 2023-10-31 09:58:37 Subject to change without notice** 

**8 LUMINESCENCE SENSORS | SICK** 

## SICK At A GlAnCe 

SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. 

We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. 

Comprehensive services complete our offering: SICK lifetime Services provide support throughout the machine life cycle and ensure safety and productivity. 

For us, that is “Sensor Intelligence.” 

## WOrldWIde preSenCe: 

Contacts and other locations www.sick.com 

SICK AG | Waldkirch | Germany | www.sick.com