LUTM-UP81162P

LUTM-UP81162P LUTM 

**LUMINESCENCE SENSORS** 

**LUTM-UP81162P | LUTM** LUMINESCENCE SENSORS 

Ordering information **Type Part no.** LUTM-UP81162P 1067295 Other models and accessories www.sick.com/LUTM ~~a~~ 

## CE @: 

## Detailed technical data 

## Features 

|**Dimensions (W x H x D)**<br>**Sensing distance**|12 mm x 31.5 mm x 21 mm<br>12.5 mm1)|
|---|---|
|**Housing design (light emission)**<br>**Operating range**|Rectangular<br>8 mm ... 20 mm|
|**Light source**|LED, Ultraviolet light2)|
|**Wave length**|370 nm|
|**Light emission**|Long side|
|**Light spot size**|2 mm x 2.5 mm3)|
|**Light spot direction**|Vertical|
|**Receiving range**<br>**Adjustment**|450 nm ... 750 nm<br>Teach-in button|
|**Teach-in mode**<br>**Output function**|2-point teach-in static/dynamic<br>Light/dark switching4)|



- 1) From front edge of lens. 

- 2) Average service life: 100,000 h at TU = +25 °C. 

- 3) At sensing distance. 

- 4) L/D switching via teach-in. 

## Mechanics/electronics 

|**Supply voltage**<br>**Ripple**|12 V DC ... 24 V DC1)<br>≤ 5 Vpp 2)|
|---|---|



- 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A. 

- 2) May not exceed or fall below Uv tolerances. 

- 3) Without load. 

- 4) With light/dark ratio 1:1. 

- 5) Signal transit time with resistive load. 

- 6) At supply voltage > 24 V, Imax = 30 mA. Imax is consumption count of all Qn. 

**Online data sheet | 2017-05-19 10:10:09 Subject to change without notice** 

**2** 

**REGISTRATION SENSORS | SICK** 

**LUTM-UP81162P | LUTM** LUMINESCENCE SENSORS 

|**Power consumption**|≤ 50 mA3)|
|---|---|
|**Switching frequency**|6 kHz4)|
|**Response time**|80 µs5)|
|**Jitter**|40 µs|
|**Output type**|PNP|
|**Switching output (voltage)**|PNP: HIGH = VS– ≤ 2 V / LOW approx. 0 V|
|**Switching output**|Light/dark switching|
|**Output current Imax.**|< 100 mA6)|
|**Input, teach-in (ET)**|PNP<br>Teach: U = 10 V ... < UV<br>Run: U < 2 V|
|**Connection type**|Cable with M12 male connector, 4-pin, 0.2 m|
|**Protection class**|III|
|**Circuit protection**|UVconnections, reverse polarity protected<br>Output Q short-circuit protected<br>Interference pulse suppression|
|**Enclosure rating**|IP67|
|**Weight**|70 g|
|**Housing material**|ABS|



- 1) Limit values: DC 12 V (–10 %) ... DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A. 

- 2) May not exceed or fall below Uv tolerances. 

- 3) Without load. 

- 4) With light/dark ratio 1:1. 

- 5) Signal transit time with resistive load. 

- 6) At supply voltage > 24 V, Imax = 30 mA. Imax is consumption count of all Qn. 

## Ambient data 

|**Ambient operating temperature**|–10 °C ... +55 °C|
|---|---|
|**Ambient storage temperature**|–20 °C ... +75 °C|
|**Shock load**|According to IEC 60068|
|**UL File No.**|NRKH.E348498 & NRKH7.E348498|



## Classifications 

|**ECl@ss 5.0**|27270908|
|---|---|
|**ECl@ss 5.1.4**|27270908|
|**ECl@ss 6.0**|27270908|
|**ECl@ss 6.2**|27270908|
|**ECl@ss 7.0**|27270908|
|**ECl@ss 8.0**|27270908|
|**ECl@ss 8.1**|27270908|
|**ECl@ss 9.0**|27270908|
|**ETIM 5.0**|EC001822|
|**ETIM 6.0**|EC001822|
|**UNSPSC 16.0901**|39121528|



**2017-05-19 10:10:09 | Online data sheet Subject to change without notice** 

**REGISTRATION SENSORS | SICK** 

**3** 

**LUTM-UP81162P | LUTM** LUMINESCENCE SENSORS 

Dimensional drawing (Dimensions in mm (inch)) 

**==> picture [183 x 237] intentionally omitted <==**

**----- Start of picture text -----**<br>
21<br>(0.83)<br>9.9<br>0.5<br>12 (0.39)<br>(0.02)<br>(0.47)<br>= te<br>18.3<br>(0.72)<br>fy (2<br>3<br>| (0.12)<br>—<br>E =<br>) (0.04)<br>0.5 0.02(  0.9<br>9 )<br>(0.35) (1.00) 1.12( (1.24)<br>25.4  28.5  31.5<br>)<br>9.7 0.38(<br>(12.01)<br> 305<br>**----- End of picture text -----**<br>


① Optical axis receiver 

- ② Optical axis sender 

- ③ M3 mounting hole 

- ④ Cable with male connector 

Adjustments 

**==> picture [49 x 53] intentionally omitted <==**

**----- Start of picture text -----**<br>
PU 1 2<br>3<br>**----- End of picture text -----**<br>


- ① Status indicator LED, yellow: Status switching output Q 

- ② LED indicator green: Supply voltage active 

- ③ Teach-in button 

Connection diagram 

Cd-023 

**==> picture [48 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
brn 1<br>+ (L+)<br>wht 2<br>Teach<br>blk 4<br>Q<br>blu 3<br>– (M)<br>**----- End of picture text -----**<br>


**Online data sheet | 2017-05-19 10:10:09 Subject to change without notice** 

**4** 

**REGISTRATION SENSORS | SICK** 

**LUTM-UP81162P | LUTM** LUMINESCENCE SENSORS 

## Concept of operation 

Setting the switching threshold (dynamic) 

## **1. Position background 2. Move at least the fluorecent mark and background using** 

**the light spot.** 

Press the teach-in button and Keep the teach-in button keep it pressed. LED flashing > 3 < 30 s pressed. slowly. 

Release the teach-in button. 

Yellow LED will illuminate, when emitted light is on the fluorecent mark. 

## **Sensitivity setting** 

Signal strength 1st press Mark signal of button Switching threshold 2nd press Background signal of button ~~A~~ 

t 

## **Switching characteristics** 

Static teach-in: light/dark setting is defined using teach-in sequence. Dynamic teach-in: switching output active on fluorecent mark, if background is longer in the field of view during the teach-in. The switching threshold is set automatically between the background and the mark. 

Teach-in can also be performed using an external control signal (only dynamic teach-in). 

Keylock activation and deactivation: hold down teach-in button > 30 s. 

Teach-in failure: yellow LED indicator and the transmitted light of the sensor flashing quickly. For dynamic teach-in with ET signal (5 Hz) via switching output Q. 

Setting the switching threshold (static) 

**1. Position fluorecent mark 2. Position background** 

**==> picture [212 x 27] intentionally omitted <==**

**----- Start of picture text -----**<br>
Press and hold teach-in   Press and hold teach-in<br>button > 1 < 3 s. button < 3 s.<br>Yellow LED flashes slowly. Yellow LED goes out.<br>**----- End of picture text -----**<br>


**2017-05-19 10:10:09 | Online data sheet Subject to change without notice** 

**REGISTRATION SENSORS | SICK** 

**5** 

**LUTM-UP81162P | LUTM** LUMINESCENCE SENSORS 

## Characteristic curve 

**==> picture [399 x 254] intentionally omitted <==**

**----- Start of picture text -----**<br>
Relative sensitivity in %<br>120 %<br>a<br>aa a a a a a a ee ee ee<br>a a a a a a a Ba a a Ba a ae a<br>pj ft of of ty fp yp fy yp<br>100 % a<br>a a a a a a a a ee<br>a a i ee eee<br>a a A, a eee eee<br>ee eee) ee, ee ee ee eee<br>a eS ee ee eee ee<br>80 % Pop oy fy pp A<br>aa| aeeee<br>ee ee ee ee ee eee<br>eeeee ee ee ee ee, Nee eee eee<br>60 % eeee ee eee eee, ee eee<br>Aa<br>aa | a eS<br>aa a a a a a ee ee,<br>40 % aa a a ee,<br>a RN a PN es aces en ee ee ee ee,<br>a ee ne ey Aa a ee i i ee ee ee ee ee ee, e e<br>poof | | | } gy yt RS<br>a a a A a a a a ee ee<br>poof | | tT<br>20 % P| | | | gw oy ft tf yy yy py<br>ey, a a a a a a a ee<br>a a a 2 a a a a a a a a ee ee ee<br>2a a a a a a a a a a ee ee ee ee<br>a A a a a a a a a i ee eeee ee<br>0 % a<br>0 5 10 15 20 25<br>(0.20) (0.39) (0.59) (0.79) (0.89)<br>Sensing distance in mm (inch)<br>**----- End of picture text -----**<br>


## Recommended accessories 

> Other models and accessories > www.sick.com/LUTM 

||**Brief description**|**Type**|**Part no.**|
|---|---|---|---|
|Universal bar clamp systems||||
||Universal clamp bracket for rod mounting, steel, zinc coated, without mounting hard-<br>ware|BEF-KHS-KH1|2022726|
||Plate L for universal clamp bracket, steel, zinc coated, universal clamp and mounting<br>hardware included|BEF-KHS-L01|2023057|
||Plate N08 for universal clamp bracket, Zinc plated steel (sheet), Zinc die cast (clamping<br>bracket), Universal clamp (5322626), mounting hardware|BEF-KHS-N08|2051607|
||Plate N08N for universal clamp bracket, Stainless steel 1.4571 (sheet), Stainless steel<br>1.4408 (clamp), Universal clamp (5322626), mounting hardware|BEF-KHS-N08N|2051616|
||Mounting bar, straight, 200 mm, steel, steel, zinc coated, without mounting hardware|BEF-MS12G-A|4056054|
||Mounting bar, straight, 300 mm, steel, steel, zinc coated, without mounting hardware|BEF-MS12G-B|4056055|
||Mounting bar, L-shaped, 150 mm x 150 mm, steel, steel, zinc coated, without mounting<br>hardware|BEF-MS12L-A|4056052|
||Mounting bar, L-shaped, 250 x 250 mm, steel, steel, zinc coated, without mounting<br>hardware|BEF-MS12L-B|4056053|
|Device protection (mechanical)||||
||Stainless steel 1.4301 (SVS 304), 3 mm thick protective sleeve for G6, stainless steel<br>1.4301, mounting hardware included|BEF-SG-G6|2069044|



**Online data sheet | 2017-05-19 10:10:09 Subject to change without notice** 

**6** 

**REGISTRATION SENSORS | SICK** 

**LUTM-UP81162P | LUTM** LUMINESCENCE SENSORS 

|~~ee~~|**Brief description**<br>|**Type**<br>|**Part no.**<br>|
|---|---|---|---|
|Mounting brackets and plates<br>~~eeeee~~||||
|~~eee~~|Mounting bracket for wall mounting, Stainless steel, mounting hardware included<br>~~eee~~|BEF-W100-A<br>~~eee~~<br>~~ae~~|5311520<br>~~eee~~<br>~~ae~~|
|~~LC.~~|Mounting bracket for floor mounting, steel, zinc coated, mounting hardware included<br>~~LC.~~|BEF-W100-B<br>~~LC.~~<br>~~ae~~|5311521<br>~~LC.~~<br>~~ae~~|
||Mounting bracket for W100 with specific bore-hole arrangements, steel, zinc coated<br>~~LC.~~|BEF-WN-W100-S01<br>~~LC.~~<br>~~ae~~|4073866<br>~~LC.~~<br>~~ae~~|
|~~LC.~~|Adapter plate KT3 to KTM, Stainless steel, fastening screws included<br>~~LC.~~|BEF-AP-KTMS01<br>~~LC.~~<br>~~ae~~|2068786<br>~~LC.~~<br>~~ae~~<br>~~ae~~|
|Plug connectors and cables<br>~~ne~~<br>~~ae~~||||
|~~ne~~|Head A: female connector, M12, 4-pin, straight<br>Head B: cable<br>Cable: PVC, unshielded, 2 m<br>~~ne~~|DOL-1204-G02M<br>~~ne~~|6009382<br>~~ne~~<br>~~ae~~|
||Head A: female connector, M12, 4-pin, straight<br>Head B: cable<br>Cable: PVC, unshielded, 5 m|DOL-1204-G05M|6009866|
||Head A: female connector, M12, 4-pin, angled<br>Head B: cable<br>Cable: PVC, unshielded, 2 m|DOL-1204-W02M|6009383|
||Head A: female connector, M12, 4-pin, angled<br>Head B: cable<br>Cable: PVC, unshielded, 5 m|DOL-1204-W05M<br>~~)~~|6009867<br>~~)~~|
|~~i~~|Head A: female connector, M12, 4-pin, straight<br>Head B: -<br>Cable: unshielded<br>~~i~~|DOS-1204-G<br>~~i~~<br>~~)~~|6007302<br>~~i~~<br>~~)~~|
|~~i~~|Head A: female connector, M12, 4-pin, angled<br>Head B: -<br>Cable: unshielded<br>~~i~~|DOS-1204-W<br>~~i~~<br>~~)~~|6007303<br>~~i~~<br>~~)~~|



**2017-05-19 10:10:09 | Online data sheet Subject to change without notice** 

**REGISTRATION SENSORS | SICK** 

**7** 

## SICK At A GlAnCe 

SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. 

We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. 

Comprehensive services complete our offering: SICK lifetime Services provide support throughout the machine life cycle and ensure safety and productivity. 

For us, that is “Sensor Intelligence.” 

## WOrldWIde preSenCe: 

Contacts and other locations www.sick.com 

SICK AG | Waldkirch | Germany | www.sick.com