Image not available
Illustrative purposes only
LSH14LIGHT FLC
Battery, 3.6 V, C, Lithium Thionyl Chloride, 3.6 Ah, Raised Positive and Flat Negative, 1
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: SAFT
- Product type: Batteries - Non-Rechargeable
- SVHC: No SVHC (27-Jun-2024)
- Weight: 51g
- Pack Quantity: 1
- Product Range: -
- Battery Voltage: 3.6V
- External Height: 50.4mm
- Battery Capacity: 3.6Ah
- Battery IEC Code: -
- Battery NEDA Code: -
- Battery Size Code: C
- Battery Terminals: Raised Positive and Flat Negative
- External Diameter: 26mm
- Battery Technology: Lithium Thionyl Chloride
| Delivery and price | |
|---|---|
| Units per pack | 20 |
| Price | 35.12 € |
| Current stock | 10+ |
| Lead time | 30 days |
## Primary lithium battery LSH 14 “light” 3.6 V Primary lithium-thionyl chloride (Li-SOCl2) High power C-size spiral cell (non-restricted for transport) ## **Benefits** - G High voltage response, stable during most of the lifetime of the application - G High drain/pulse capability - G Wide operating temperature range _(-60°C/85°C)_ - G Easy integration in compact system - G Low self-discharge rate _(less than 3% after 1year of storage at +20°C)_ - G Non-restricted for transport ## **Key features** - G Stainless steel container - G Hermetic glass-to-metal sealing - G Built-in safety vent - G Finish with 5 A fuse - G Non-flammable electrolyte ## **Main applications** - G Radiocommunication and other military applications - G Alarms and security systems - G Beacons and emergency location transmitters - G GPS - G Metering systems - G Sonobuoys ## **Cell size references UM2 – R14 – C** PO ## **Electrical characteristics** _(typical values relative to cells stored for one year or less at + 30°C max.)_ **==> picture [299 x 55] intentionally omitted <==** **----- Start of picture text -----**<br> |||| |---|---|---| |Nominal capacity|3.6 Ah| |(at 15 mA + 20°C|2.0 V cut off. The capacity restored by the cell varies| |according to current drain, temperature and cut off)| |Open circuit voltage|(at +20°C)|3.67 V| |Nominal voltage|(at 1mA +20°C)|3.6 V| **----- End of picture text -----**<br> ## Pulse capability: Typically up to 2000 mA _(2000 mA/0.1 second pulses, drained every 2 mn at + 20°C from undischarged cells with 10 µA base current, yield voltage readings above_ _3.0 V. The readings may vary according to the pulse characteristics, the temperature, and the cell's previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft)_ Maximum recommended continuous current 1300 mA _(to maintain cell heating within safe limits. Battery packs may imply lower level of maximum current and may request specific thermal protection. Consult Saft)_ **==> picture [323 x 179] intentionally omitted <==** **----- Start of picture text -----**<br> |||| |---|---|---| |Storage|(recommended)|+ 30°C (+ 86°F) max| |(for more severe conditions, consult Saft)| |Operating temperature range|- 60°C/+|85°C| |(Operation at extreme T may lead to reduced capacity and|(- 76°F/+185°F)| |lower voltage readings at the beginning of pulses. Consult Saft)| |Physical characteristics| |Diameter|(max)|26.0 mm (1.02 in)| |Height|(max)|50.4 mm (1.98 in)| |Typical weight|51 g (1.8 oz)| |Li metal content|below 1 g| |Available termination suffix| |CN, CNR|radial tabs| |3 PF, 3 PF RP|radial pins| |CNA (AX)|axial leads| |FL|flying leads ...etc.| **----- End of picture text -----**<br> October 2006 ## LSH 14 “light” a **==> picture [84 x 8] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions in mm.<br>**----- End of picture text -----**<br> **==> picture [291 x 316] intentionally omitted <==** **----- Start of picture text -----**<br> ao Pt Bill<br>oe | NS | lll<br>opt LE TTTPANT<br>aeLTETE E<br>1 40 100 1000<br>Current (mA)<br>Voltage plateau versus Current and Temperature (at mid-discharge)<br>Se eeel<br>se tHEEEE TEE TET<br>ol Saa|<br>3.0oeset |PT|| TUTEUEET,|LEfeEta\ TT Pe ETTTTT<br>oat | THI TET TT Ty ti ETT<br>ee a |<br>so} TI | R I E SEE ETT<br>wp E T<br>0.1 1 10 100 4000<br>Time (hours)<br>Cell voltage (V)<br>Cell voltage (V)<br>**----- End of picture text -----**<br> **Typical discharge profiles at + 20°C** ## **Storage** - The storage area should be clean, cool (preferably not exceeding + 30°C), dry and ventilated. ## **Warning** - Fire, explosion and burn hazard. - Do not recharge, short circuit, crush, disassemble, heat above 100°C (212°F), incinerate, or expose contents to water. - Do not solder directly to the cell (use tabbed cell versions instead). **==> picture [291 x 135] intentionally omitted <==** **----- Start of picture text -----**<br> os PE Prt e |<br>TI I E<br>eenN<br>1 10 100 4000<br>Current (mA)<br>Restored Capacity versus Current and Temperature (2.0 V cut off)<br>Capacity (Ah)<br>**----- End of picture text -----**<br> Doc. N[o] 31046-2-1006 ## **Saft** ## **Specialty Battery Group** 12, rue Sadi Carnot 93170 Bagnolet - France Tel +33 (0)1 49 93 19 18 Fax +33 (0)1 49 93 19 69 Information in this document is subject to change without notice and becomes contractual only after written confirmation by Saft. For more details on primary lithium technologies please refer to Primary Lithium Batteries Selector Guide Doc N[o] 31048-2. Published by the Communications Department. Photo credit: Saft Société anonyme au capital de 31 944 000 RCS Bobigny B 383 703 873 Produced by Arthur Associates **www.saftbatteries.com**
Updated at April 28, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →