Image not available
Illustrative purposes only
LS240D12
Solid State Relay, LS Series, SIP, SPST-NO, 12 A, 280 Vrms, PCB, Through Hole, Zero Crossing
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: SENSATA/CRYDOM
- Product type:
- Contact Configuration:SPST-NO; Load Current:12A; Operating Voltage Max:280Vrms; Relay Mounting:PCB; Relay Terminals:Through Hole; Switching Mode:Zero Crossing; Operating Voltage Min:24V
- Load Current: 12A
- Product Range: LS Series
- Relay Mounting: PCB
- Switching Mode: Zero Crossing
- Relay Terminals: Through Hole
- Control Voltage Max: 10VDC
- Control Voltage Min: 4VDC
- Contact Configuration: SPST-NO
- Operating Voltage Max: 280Vrms
- Operating Voltage Min: 24Vrms
| Delivery and price | |
|---|---|
| Units per pack | 20 |
| Price | 29.4 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**PCB Mount** _DataSheet_ ## _**LS Series**_ ## • SIP SSR - Ratings to 12A @ 280 VAC - SCR output for heavy industrial loads - DC control - Zero Voltage Turn-on (resistive loads) or Instantenous Turn-on (inductive loads) output ## **PRODUCT SELECTION** |**Control Voltage 8A 12A**|**Control Voltage 8A 12A**|**Control Voltage 8A 12A**| |---|---|---| |4-10 VDC|LS240D8|LS240D12| |20-28 VDC|LSE240D8|LSE240D12| ## **AVAILABLE OPTIONS** **==> picture [299 x 80] intentionally omitted <==** **----- Start of picture text -----**<br> Operational Current<br>Operational Voltage240: 24-280 VAC 8: 8 Amps<br>Series 12: 12 Amps<br>LS E 240 D 12 R<br>Control Voltage Control Input Voltage Switching Type<br>Blank: 4-10 VDC D: DC Input Blank: Zero Voltage Turn-On<br>E: 20-28 VDC R: Instantaneous Turn-On<br>**----- End of picture text -----**<br> Required for valid part number For options only and not required for valid part number ## **OUTPUT SPECIFICATIONS[(1)]** |**Description**|**LS240D8**|**LS240D12**| |---|---|---| |Operating Voltage (47-63Hz) [Vrms]|24-280|24-280| |Transient Overvoltage [Vpk]|600|600| |Maximum Off-State Leakage Current @ Rated Voltage[mArms]|0.1|0.1| |Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec](2)|500|500| |Maximum Load Current [Arms](3)|8|12| |Minimum Load Current[Arms]|0.15|0.15| |Maximum Surge Current (16.6ms)[Apk]|80|120| |Maximum On-State Voltage Drop @ Rated Current [Vpk]|1.6|1.6| |Thermal Resistance Junction to Case(Rjc) [°C/W]|2.2|2.0| |Minimum Power Factor (with Maximum Load)|0.5|0.5| FDE-07-01 REV. A **Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2017 Crydom Inc. Specifications subject to change without notice. ## **PCB Mount** _DataSheet_ ## **INPUT SPECIFICATIONS[(1)]** |**Description**|**LS**|**LSE**| |---|---|---| |Control Voltage Range|4-10 VDC|20-28 VDC| |Must Turn On Voltage|4.0 VDC|20 VDC| |Must Turn Off Voltage|1.0 VDC|1.0 VDC| |Typical Input Current @ Nominal Voltage|15 mA|15 mA| |Nominal Input Impedance|270 Ohm|1500 Ohm| |Maximum Turn-on Time[msec]|1/2 Cycle|1/2 Cycle| |Maximum Turn-Off Time [msec]|1/2 Cycle|1/2 Cycle| ## **GENERAL SPECIFICATIONS[(1)]** |**GENERAL SPECIFICATIONS (1)**|| |---|---| |**Description**|**Parameters**| |Dielectric Strength, Input/Output/Base (50/60Hz)|2500 Vrms| |Minimum Insulation Resistance (@ 500 VDC)|109Ohm| |Maximum Capacitance, Input/Output|10 pF| |Ambient Operating Temperature Range|-30 to 80°C| |Ambient Storage Temperature Range|-30 to 125°C| |Weight (typical)|0.6 oz. (17 gr)| |Encapsulation|Thermally Conductive Epoxy| ## **GENERAL NOTES** **(1)** **(2)** Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 **(3)** See Current Derating Curve. ## **WIRING DIAGRAM** **==> picture [277 x 206] intentionally omitted <==** **----- Start of picture text -----**<br> 4 -VDC<br>V3 +VDC<br>B<br>2 LOAD VAC<br>Load can be used wired in position A or B<br>1 LOAD VAC<br>A<br>Trigger<br>Circuit<br>**----- End of picture text -----**<br> **Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2017 Crydom Inc. Specifications subject to change without notice. **PCB Mount** _DataSheet_ ## **MECHANICAL SPECIFICATIONS** Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] **==> picture [339 x 202] intentionally omitted <==** **----- Start of picture text -----**<br> 0.52 0.40<br>0.45 Ø 0.14 [13.1] [10.2]<br>[11.4]<br>4 - [3.6] ro,<br>0.15<br>[3.7]<br>| — 2<br>[31.0]1.22 [26.5]1.05 | 0.90 | crydom LS240D12<br>[22.7]<br>12A 240VAC 4-10VDC 0.16<br>1 ~ 2 me +3 -4 h [4.1]<br>0.16 .032<br>[4.0] [0.8]<br>0.11<br>| ft ge [2.9±.25] Gf | 0.032 ± .005 ~ 0.44<br>SQ. [.80 ±.13] [11.1]<br>0.40 (4 Places)<br>[10.2]<br>0.30 0.20<br>[7.6] [5.1]<br>1.40<br>[35.5]<br>**----- End of picture text -----**<br> ## **THERMAL DERATE INFORMATION** **==> picture [211 x 133] intentionally omitted <==** **----- Start of picture text -----**<br> 8 Amp<br>4ºC/W 6ºC/W 8ºC/W 10ºC/W No Heatsink<br>8<br>6<br>4<br>2<br>0<br>20 30 40 50 60 70 80<br>Ambient Temperature (ºC)<br>Load Current (Amps)<br>**----- End of picture text -----**<br> **==> picture [218 x 139] intentionally omitted <==** **----- Start of picture text -----**<br> 12 Amp<br>4ºC/W 6ºC/W 8ºC/W 10ºC/W No Heatsink<br>12<br>10<br>8<br>6<br>4<br>2<br>0<br>10 20 30 40 50 60 70 80<br>Ambient Temperature (ºC)<br>Load Current (Amps)<br>**----- End of picture text -----**<br> ## **AGENCY APPROVALS** Designed in accordance with the requirements of IEC 62314 E116950 Rev. 080417 ECN 20291 **Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2017 Crydom Inc. Specifications subject to change without notice. **PCB Mount** _DataSheet_ ## **DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO /** 危险 **HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI** 存在电击、 **ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA** 爆炸或电弧 **SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O** 闪烁危险 **EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSI OR ARC FLASH.** • Desconectar • Eteindre **EXPLOSION. ONE.** • 在操作此设 • Disconnect all todos los toutes les • Stellen Sie • Spenga tutta 备之前请先 power before suministros de sources jeglichen l'alimentazion 关闭电源。 installing or energia a este d'énergie de Strom ab, der e che fornisce working with equipo antes cet appareil dieses Gerät questa this equipment. de trabajar avant de versorgt, bevor apparecchiatu 若不遵守这些说明， con este equipo. travailler Sie an dem ra prima del 可能会导致严重的 • Verify all dessus de cet Gerät Arbeiten lavorare a questa 人身伤害甚至死亡。 connections • Verificar todas appareil durchführen apparecchiatu ra and replace all las conexiones • Vor dem covers before y colocar todas • Vérifier tous • Verificare tutti Drehen auf turning on las tapas antes connections, et i collegamenti Energie alle power. de energizer remettre tous Anschlüsse e sostituire el equipo. couverts en tutte le coperture **Failure to follow** olace avant de überprüfen prima della **these El** mettre sous und alle rotazione **instructions will incumplimiento** Abdeckungen sull'alimentazi one **result in death de estas De non-suivi de** ersetzen. **or serious injury. instrucciones ces instructions Unterlassung L'omissione di puede provocar provoquera la dieser seguire queste la muerte o mort ou des Anweisungen istruz ioni lesiones serias. lésions sérieuses können zum provocherà la sérieuses. Tode oder zu morte o di schweren lesioni serie Verletzungen führen.** **Failure to follow these instructions will result in death or serious injury.** ## **WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA /** 警告 ## **RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE** - The product's side panels may be hot, allow - the product to cool before touching. - Follow proper mounting instructions including - torque values. - Do not allow liquids or foreign objects to enter - this product. **Failure to follow these instructions can result in serious injury, or equipment damage.** ## **RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD** - Los paneles laterales del producto pueden - estar calientes. Esperar que el producto se enfríe antes de tocarlo. - Respetar las instrucciones de montaje, y en - particular los pares de apretado. - No dejar que penetren líquidos o cuerpos - extraños en el producto. **Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales.** **GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG** ## **RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER** **•** Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher. - Die Seitenwände können heiß sein. Lassen Sie - das Produkt abkühlen, bevor Sie es berühren. - Beachten Sie die Montageanweisungen, - Respecter les consignes de montage, et - notamment les couples de serrage. - Führen Sie keine Flüssigkeiten oder - Fremdkörper in das Produkt ein. - Ne pas laisser pénétrer de liquide ni de corps - étrangers à l'intérieur du produit. **Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann des lésions corporelles graves ou des Körperverletzung oder Materialschäden dommages matériels. zur Folge haben.** ## 材料损坏和高温外壳的危险性 ## **RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO** - 产品的一侧面板可能很热，在其冷却前请 - 不要触碰。 **•** I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo. - 遵照正确的安装说明，包括扭矩值。 - 请勿让液体及其他异物进入本产品。 - Seguire le istruzioni di montaggio corrette. - Non far entrare liquidi o oggetti estranei in questo - apparecchio. > **La mancata osservanza di questa precauzione può** 如不能正确执行这些操作说明， > **causare gravi rischi per l'incolumità personale o** 极有可能造成严重人体伤害或者设备的损坏。 **danni alle apparecchiature.** **Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2017 Crydom Inc. Specifications subject to change without notice. **PCB Mount** _DataSheet_ ## **ANNEX - ENVIROMENTAL INFORMATION** The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. |Part<br>Name|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements|Toxic or hazardous Substance and Elements| |---|---|---|---|---|---|---| ||Lead<br>(Pb)|Mercury<br>(Hg)|Cadmium<br>(Cd)|Hexavalent<br>Chromium<br>(Cr (VI))|Polybrominated<br>biphenyls<br>(PBB)|Polybrominated<br>diphenyl ethers<br>(PBDE)| |Semiconductor die||||||| |Solder||||||| ## 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 |件<br>部<br>名称|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素|有毒有害物质或元素| |---|---|---|---|---|---|---| ||铅<br>(Pb)|汞<br>(Hg)|镉<br>(Cd)|六价铬<br>(Cr (VI))|多溴联苯<br>(PBB)|多溴二苯醚<br>(PBDE)| |半导体芯片||||||| |焊接点||||||| **==> picture [96 x 94] intentionally omitted <==** **----- Start of picture text -----**<br> 50<br>**----- End of picture text -----**<br> **Do not forget to visit us at:** _**www.crydom.com**_ Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
Updated at June 5, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →