LS17330 FLC

## Primary lithium battery LS 17330 

3.6 V Primary lithium-thionyl chloride (Li-SOCl2) High energy density 2∕3 A-size bobbin cell 

## **Benefits** 

- l High voltage response, stable during most of the lifetime of the application 

- l Wide operating temperature range _(-  60°C/+  85°C)_ 

- l Low self-discharge rate _(less than 1 % after 1 year of storage at + 20°C)_ 

- l Easy integration into compact systems 

**2∕3 A** 

## **Cell size reference** 

## **Electrical characteristics** 

_(typical values relative to cells stored for one year or less at + 30°C max.)_ 

|Nominal capacity<br>_(at 3 mA + 20°C 2.0 V cut-off. The capacity restored by the cell varies_|_(at 3 mA + 20°C 2.0 V cut-off. The capacity restored by the cell varies_|2.1 Ah|
|---|---|---|
|_according to current drain, temperature and cut-off)._|_according to current drain, temperature and cut-off)._||
|Open circuit voltage<br>Nominal voltage<br>Nominal energy|(at + 20°C)<br>(at 0.2 mA + 20°C)|3.67 V<br>3.6 V<br>7.56 Wh|



Pulse capability: Typically up to 120 mA 

## **Key features** 

- l Hermetic glass-to-metal sealing 

- l Non-flammable electrolyte 

- l Underwriters Laboratories _(UL)_ Component Recognition _(File Number MH 12802)_ 

- l Compliant with IEC 60086-4 safety standard and IEC 60079-11 intrinsic safety standard 

- l Non-restricted for transport/ Non-assigned to Class 9 according to the UN Recommendations on the transport of dangerous goods - Model Regulations 

## **Main applications** 

- l Utility metering 

- l Automatic meter reading 

_(120 mA/0.1 second pulses, drained every 2 mn at + 20°C from undischarged cells with 10 μA base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft)_ 

|Maximum recommended continuous current<br>_(Higher currents possible, consult Saft)_||25 mA|
|---|---|---|
|Storage<br>_(recommended)_<br>_(for more severe conditions, consult Saft)_||+ 30°C (+ 86°F) max|
|Operating temperature range<br>_(Operation above ambient T may lead to reduced capacity and_<br>_lower voltage readings at the beginning of pulses. Consult Saft)_||- 60°C/+ 85°C<br>(- 76°F/+ 185°F)|
|**Physical characteristics**|||
|Diameter (max)||16.5 mm (0.65 in)|
|Height (max)||33.4 mm (1.31 in)|
|Typical weight||14.4 g (0.5 oz)|
|Li metal content||approx. 0.6 g|
|Available termination suffix|||
|CNR, CNR OP<br>2 PF, 3 PF, 3 PF RP<br>CNA (AX)|rectangular radial tabs<br>radial pins<br>axial leads|rectangular radial tabs|



- l Alarms and security devices 

- l Tollgate systems 

- l Memory back-up 

- l Tracking systems 

- l Automotive electronics 

- l Professional electronics 

May 2010 

## LS 17330 

**==> picture [141 x 165] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ø 4.0<br>max<br>|<br>|<br>=<br>7<br>1.2<br>| ± 0.2 _ ,<br>33.1  Ø 16.3<br> ± 0.3 ± 0.2<br>0.5<br>± 0.1<br>a li<br>—— —<br>Ø 8.7<br>\ 4<br> ±  0.3<br>Dimensions in m m.<br>**----- End of picture text -----**<br>


## **Storage** 

- The storage area should be clean, cool _(preferably not exceeding + 30°C)_ , dry and ventilated. 

## **Warning** 

- Fire, explosion and burn hazard. 

- Do not recharge, short circuit, crush, disassemble, heat above 100°C _(212°F)_ , incinerate, or expose contents to water. 

- Do not solder directly to the cell _(use tabbed cell versions instead)_ . 

**==> picture [255 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Voltage plateau versus Current and Temperature (at mid-discharge)<br>**----- End of picture text -----**<br>


**==> picture [340 x 522] intentionally omitted <==**

**----- Start of picture text -----**<br>
3.8<br>3.7 PE TYET<br>3.6 pfee<br>3.5 | | | Pr See<br>3.4 PT | Pre RENTTT<br>3.33.2 PTaPATOWN NAT + 55°C TT<br>3.1 PT | + 70°C<br>3.0 a A AAT NNN + 20°C TT<br>2.9 PTTENNeeNee - 20°C<br>2.8 aeeONT TTT<br>2.7 a |<br>2.6 - 40°C eee<br>2.5 a ee<br>0.1 1 10 100 1000<br>Current (mA)<br>PE TTNT<br>Typical discharge profiles at + 20°C<br>3.7<br>3.5<br>e S<br>3.3<br>— — ee |<br>3.1<br>2.9 e| T ee WD |<br>2.7 a a 0||<br>2.5<br>a|<br>2.3<br>a eH<br>2.1<br>1.9 a|ee |<br>1.7 |<br>1.5 p e<br>0.1 1 10 100 1000<br>Time (hours)<br>Restored Capacity versus Current and Temperature (2.0 V cut-off)<br>2.4<br>2.2<br>La<br>+ 20°C<br>2.0<br>Po eet too TE EE TTT<br>1.8 - 20°C<br>pt ee |TT<br>1.6 Poeer + 55°C + 70°C TTT<br>1.4 Po FN SRR<br>1.2 poRR - 40°C AT<br>1.0<br>PoP SS AR<br>0.8 potETTee AN SRN TT<br>0.6 a ee,ONT ASNT<br>0.4 potESETee SSS<br>0.2 PTT TEAS<br>0 a eee<br>0.1 1 10 100<br>Current (mA)<br> Cell voltage (V)<br>Cell voltage (V)<br>30 Ohms/100 mA 60 Ohms/53 mA 120 Ohms/27 mA 400 Ohms/8.5 mA 1000 Ohms/3.6 mA<br>Capacity (Ah)<br>**----- End of picture text -----**<br>


## **Saft** 

## **Specialty Battery Group** 

12, rue Sadi Carnot 93170 Bagnolet - France Tel  +33 1 49 93 19 18 Fax +33 1 49 93 19 69 

River Drive, South Shields Tyne & Wear, NE33 2TR - UK Tel +44 191 456 1451 Fax +44 191 456 6383 

Doc. Nº 31040-2-0510 

Information in this document is subject to change without notice and becomes contractual only after written confirmation by Saft. For more details on primary lithium technologies please refer to Primary Lithium Batteries Selector Guide Doc Nº 31048-2. Published by the Communications Department. Photo credit: Saft Société anonyme au capital de 31 944 000 € RCS Bobigny B 383 703 873 

Produced in the UK by Arthur Associates Limited 

**www.saftbatteries.com**