LR6-USBK

||Drawing No.|Rev.|Page|
|---|---|---|---|
||LR6-USBW-W18|F|1 / 7|



## **SPECIFICATIONS** 

Product Name: USB Signal Tower / Body Unit Model: LR6-3USB□-RYG／LR6-USB□ 

|Drawing No.|Rev.|Page|
|---|---|---|
|LR6-USBW-W18|F|2 / 7|



## **1. General Specifications** 

|**1. General Specifications**|**1. General Specifications**|**1. General Specifications**|**1. General Specifications**|**1. General Specifications**|||
|---|---|---|---|---|---|---|
|Model|||||LR6-□USB□||
|Rated Voltage|||||5V DC(USB Bus Power)||
|OperatingVoltage Range|||||Rated Voltage±5%(Compliant with USB 2.0 standard)||
|Rated Current Consumption||||Max.|500mA||
|OperatingAmbient Temperature|||||-20℃-  +50℃||
|OperatingAmbient Humidity|||||90% RH or less(No Condensation)||
|Storage Ambient Temperature|||||-30℃-  +60℃||
|Storage Ambient Humidity|||||90% RH or less(No Condensation)||
||MountingLocation||||Indoor Only||
||MountingDirection||||Upright||
||Protection Rating||||IP 65(IEC 60529)/ NEMA TYPE 4X,13||
||Environmental Condition||||Upright||
|Supported LED Unit(Optional)|||||LR6-E-□ (□=R,Y,G,B,C),LR6-E-□Z(□=R,Y,G,B),LR6-E-MZ||
|LED Unit Control|||||Light On,Pattern On(4 Types)||
|Buzzer||Operation|||Sound On,Sound Pattern(4 Types)||
|||Frequency|||13 Types||
|||Sound Pressure<br>Condition<br>Environmental|||Typ. 80dB(Sound Reduction: Approximately-10dB)||
||||Condition<br>Environmental||Buzzer Frequency: 2349.3Hz<br>Front direction from the Buzzer Aperture, at 1m||
|Mass(Tolerance:±10%)|||||LR6-USB□：140g LR6-3USB□-RYG：320g||
|Outer Dimensions|||||Refer to the Outer Dimension Drawing||
|Communication Method|||||USB2.0 Full Speed||
|Software Library(DLL)<br>Supported OS|||||Windows 8.1(Excludes Windows 8 RT),Windows 10<br>Windows 7, Windows 8(Excludes Windows 8 RT),||
|Conformity Standards|||||EMC Directive (EN 61000-6-3, EN 61000-6-2, EN55032 ClassB, EN55035)<br>KC (KN 61000-6-2 /6-4)<br>UL 60950-1 ,CAN/CSA C22.2 No. UL60950-1-07<br>FCC Part 15 Subpart B Class B<br>ICES-003<br>RoHS Directive(EN IEC 63000)||
|Operation Unit|||||Volume Switch x1(Sound Pressure: High/Low 2 Levels)||
|Accessories|||||Flanged Nut(M4)x3,Cable Tie x1||
|Option|||||Wallmount Bracket|SZK-003□|
||||||Pole Bracket|SZP-004□|
||||||Aluminum Pole|POLE-□00A21K,POLE-□00A21,|
||||||Pole MountingBase|SZ-016A,SZ-010|
||||||L Bracket|Incompatible|
||||||MountingBracket|SZW-002W|
|Limitations|||||Units other than the correspondingLED unit can not be connected.||
||||||You cannot connect more than one LED unit(LR6-E-□,LR6-E-□Z)of the same color.||
||||||Whenyou use LR6-E-MZ,you cannnot connect anyother units.||
||||||Whenyou use LR6-E-MZ,there are two types of LED lightpatterns.||
|Remark|||||UL/cUL Listed<br>CE Marking||



|Drawing No.|Rev.|Page|
|---|---|---|
|LR6-USBW-W18|F|3 / 7|



**==> picture [496 x 290] intentionally omitted <==**

**----- Start of picture text -----**<br>
2. Model<br>2.1. Model Number Configuration<br>・<br>USB Signal Tower<br>- -<br>ＬＲ ６ ３ Ｕ Ｓ Ｂ □ ＲＹＧ<br>Size Body Color LED Unit Color<br>6 φ60 W Off-White R Red<br>K Black Y Amber<br>Signal Tower Tiers *K type is an international model. G Green<br>3 3 tiers USB Signal Tower From top to bottom<br>・Body Unit<br>-<br>ＬＲ ６ Ｕ ＳＢ □<br>Size Body Color<br>6 φ60 W Off-White<br>K Black<br>*K type is an international model.<br>**----- End of picture text -----**<br>


## 2.2. Model Number List 

LR6-3USBW-RYG LR6-USBW LR6-3USBK-RYG LR6-USBK 

## **3. Function Specification** 

## 3.1 Function overview 

|3.1 Function overview|||
|---|---|---|
|USB Comunication Function|A function for connecting and communicating with the host PC via USB<br>cable.<br>Use software library (DLL).|－|
|LED Unit Control Function|A function for the host PC to control the LED Unit via USB<br>Control Items: Light on / Light off/ Pattern on|Refer to<br>3.2.1|
|Buzzer Function|A function for the host PC to sound the buzzer built into the body unit<br>via USB communication.<br>Control Items: Buzzer on / Buzzer off/ Sound Pattern|Refer to<br>3.2.2|
|Buzzer Volume Change Function|A function for changing the buzzer volume via switch on the body unit.<br>・Change Levels：2 Levels (H：High Volume／L：Low Volume)<br> ・Initial Value：H|-|



|Drawing No.|Rev.|Page|
|---|---|---|
|LR6-USBW-W18|F|4 / 7|



## 3.2. Function Detail 

## 3.2.1. LED Unit Control Function 

|LED Unit<br>Control||Light On(On)|Turns the LED Unit on,and keeps it on.|Turns the LED Unit on,and keeps it on.|Turns the LED Unit on,and keeps it on.|Turns the LED Unit on,and keeps it on.|Turns the LED Unit on,and keeps it on.|Turns the LED Unit on,and keeps it on.|Turns the LED Unit on,and keeps it on.|Turns the LED Unit on,and keeps it on.|
|---|---|---|---|---|---|---|---|---|---|---|
|||Light Off(Off)|Turns off the LED Unit.This is the initial state after the bodyunit is started.||||||||
|||Pattern On|Specify one of four types of LED patterns to illuminate the LED Unit.<br>Operation of LEDpatterns for one cycle is shown in the followingtimingcharts.||||||||
|||LED Pattern 1|ON<br>(250msec)|||**OFF**<br>**(250msec)**||ON<br>(250msec)||**OFF**<br>**(250msec)**|
||||||||||||
|||LED Pattern 2|ON<br>(500msec)|||||**OFF**<br>**(500msec)**|||
||||||||||||
|||LED Pattern 3|||||||||
||||ON<br>(80msec)|**OFF**<br>**(170msec)**||ON<br>(80msec)|**OFF**<br>**(670msec)**||||
||||||||||||
|||LED Pattern 4|||||||||
||||ON<br>(100msec)|**OFF**<br>**(400msec)**||||ON<br>(100msec)|**OFF**<br>**(400msec)**||
||||||||||||
||Pattern On<br>*When usingLR6-E-MZ<br>LED Pattern 1<br>LED Pattern 2||Specify one of two types of LED patterns to illuminate the LED Unit.<br>Operation of LEDpatterns for one cycle is shown in the followingtimingcharts.||||||||
|||LED Pattern 1|||||||||
||||**OFF**<br>**(100msec)**|ON<br>(150msec)||**OFF**<br>**(350msec)**|||ON<br>(150msec)|**OFF**<br>**(250msec)**|
||||||||||||
|||LED Pattern 2|||||||||
||||**OFF**<br>**(100msec)**|ON<br>(400msec)||||**OFF**<br>**(500msec)**|||
||||||||||||
|3.2.2. Buzzer Function|||||||||||
|Buzzer Control||Sound On|From 13 different sound pitches, select one for Sound A to emit the buzzer.<br>・For the buzzer, select from continuous operation or operate for a specified<br>number of times(1 to 15). Operatingone time lasts one second.||||||||
|||Sound Off|Stopthe buzzer. This is the initial state after the bodyunit is started.||||||||
|||Sound Pattern|Operation of buzzerpatterns for one cycle is shown in the followingtimingcharts.<br>･For the sound pattern, select from fontinuous operqation or operate for a<br>specified number of times(1 to 15). Operating one time is one cycle charts.<br>Specify one of four types of buzzer patterns for the buzzer.<br>･Configure the buzzer pattern by selecting two sounds(for Sound A and Sound<br>B) from 13 different sound pitches.||||||||
|||Buzzer Pattern 1|||||||||
||||Sound A<br>(250msec)|||Sound B<br>(250msec)||Sound A<br>(250msec)||Sound B<br>(250msec)|
||||||||||||
|||Buzzer Pattern 2|||||||||
|||||Sound A<br>(500msec)||||Sound B<br>(500msec)|||
||||||||||||
|||Buzzer Pattern 3|||||||||
||||Sound A<br>(80msec)|Sound B<br>(170msec)||Sound A<br>(80msec)|Sound B<br>(670msec)||||
||||||||||||
|||Buzzer Pattern 4|||||||||
||||Sound A<br>(100msec)|Sound B<br>(400msec)||||Sound A<br>(100msec)|Sound B<br>(400msec)||
||||||||||||
|Select Pitch<br>（Sound A, Sound B）||||Pitch|Frequency（Ref. Value）|||Scale|Frequency（Ref. Value）||
|||||(Stop)|-|||E♭7|2489.0Hz||
|||||A6|1760.0Hz|||E7|2637.0Hz||
|||||B♭6|1864.7Hz|||F7|2793.8Hz||
|||||B6|1975.5Hz|||G♭7|2960.0Hz||
|||||C7|2093.0Hz|||G7|3136.0Hz||
|||||D♭7|2217.5Hz|||A♭7|3322.4Hz||
|||||D7|2349.3Hz|||A7|3520.0Hz||



|Drawing No.|Rev.|Page|
|---|---|---|
|LR6-USBW-W18|F|5 / 7|



## [Handling Precaution] 

## ◆About handling this product 

- ・This product (including software) is shipped only after undergoing strict quality controls and inspections. However, should you encounter any issues, please contact your PATLITE sales representative. 

・This product (software is included) is for the use of general office work, home and for personal use, it has been developed, designed and manufactured for general applications, such as for industry, and it is not designed for applications which demands high safety requirements, such as equipment or systems used in connection directly, or indirectly, with human life.Understand prior to use, that no responsibility is taken at our company for damages or other disadvantages, due to customers using this product beyond the scope of its general application, or from any claims from third parties.When using this product for applications in which equipment of higher reliability than the general application demands, such as a computer system, etc., use suitable safety design countermeasures against system failure, etc. 

・The suitability of this product in the system, with other machines and equipment, shall be tested and confirmed by the customer. We assume no responsibility regarding this. Design safety into the system to cope with misoperation, misuse, going offline, and other unforeseen operation of this product. 

・We bear no responsibility for damages, lost opportunities, lost profits, compensation for accidents, or other costs including but not limited to personnel, construction, transportation, and shipping costs, related to using this product. We bear no responsibility for defects in other products, regardless of the other product's connection to this product (such as a communication line), or for the cost of repairing damages, losses, defects, or recovering lost data related to using the other products, including but not limited to personnel, construction, transportation, and shipping costs. ・To improve the functionality in the software for this product, we will update the software at our own discretion. We bear no responsibility for the results of software updates, such as damages, lost opportunities, lost profits, compensation for accidents, or other costs including but not limited to personnel, construction, transportation, and shipping costs, related to using this product. We bear no responsibility for defects in other products, regardless of the other product's connection to this product (such as a communication line), or for the cost of repairing damages, losses, defects, or recovering lost data related to using other products, including but not limited to personnel, construction, transportation, and shipping costs. 

- ・Note the following statements regarding the software for this product, which require prior written consent from PATLITE: 

- ＊Do not duplicate the software for this product. 

- ＊Do not alter, combine, reverse-engineer, decompile, or disassemble the software for this product. 

- ＊Do not license, rent, or resell the software for this product to a third party. 

- ＊Do not store the software of this product on a network so it can be transmitted to a third party. 

- ＊Do not remove the copyright notice or other trademark and company rights attached to the software for this product. 

## ◆Things you should always do for your safety 

- ・Avoid spilling liquids (such as water or chemicals) into this product. Avoid dropping foreign metallic objects (such as copper wire) into this product. Failure to follow these instructions could result in electric shock or equipment damage. 

- ・Do not drop or hit this product. Failure to follow these instructions could result in electric shock or equipment damage. 

- ・Do not apply too much force to switches and buttons on this product. Failure to follow this instruction could result in equipment damage. 

## ◆Installation 

- ・Turn off the power when wiring, inspecting, or repairing this product. Failure to follow this instruction could result in equipment damage. ・Do not install in locations near fire, or environments with high temperature and humidity. Do not install this product where corrosive or flammable gas is present. ・Do not install on an unstable surface. Failure to follow these instructions could result in injury or equipment damage. 

- ・This product is rated for indoor use only. Please install and use this product indoors only. 

- ・Avoid the following locations for installation of this product. 

- ＊Places exposed to direct sunlight. 

- ＊Places near fire or environments with high temperatures and humidity. 

- ＊Environments where temperature changes are severe, and where there is condensation. 

＊Environments with poor breathability and ventilation. ＊Places where external vibrations are directly transmitted to this product. ＊Environments where corrosive gas is present. ＊Locations exposed to salty sea air. ＊Locations near strong magnetic fields. ＊Environments where there is dust, iron powder, and so on. ＊Environments where chemicals and oil mist are present. ◆About maintenance ・Do not clean this product with volatile chemicals such as benzine or thinners, or with chemical wiping cloths as it could damage the product. ・Please clean this product with a soft, dry cloth. ・If the dry cloth is unable to clean off any dirt and grime, wipe the product firmly with a slightly water-moistened cloth. 

**==> picture [69 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
LR6-USBW- W 18<br>**----- End of picture text -----**<br>


**==> picture [33 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
6 / 7<br>**----- End of picture text -----**<br>


**==> picture [70 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
LR6-USBW- W 18<br>**----- End of picture text -----**<br>


**==> picture [33 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
7 / 7<br>**----- End of picture text -----**<br>