LR5-02LENW

Drawing No. LR5-02WE-W18 

Rev. B 

Page 1/8 

## **SPECIFICATIONS** 

Product Name:Signal Tower with Ethernet Model:LR5-02□ENW、LR5-□02□E□W-□ 

|Drawing No.|Rev.|Page|
|---|---|---|
|LR5-02WE-W18|B|2/8|



## **1 ． General Specifications** 

|**1．General Specifications**|**1．General Specifications**|**1．General Specifications**||||||
|---|---|---|---|---|---|---|---|
|Rated Voltage|||24V DC|||||
|OperatingVoltage Range|||Rated Voltage ± 10%|||||
|Rated Current<br>Consumption|||Main Unit||||Typ.15 mA   Max. 20 mA|
||||LED Unit||||Typ.40 mA   Max. 45 mA(per tier)|
||||Buzzer Unit||||Typ.40 mA   Max. 45 mA|
|OperatingAmbient Temperature|||-20℃ ～+50℃|||||
||OperatingAmbient Humidity||90% RH or less,no freezing,no condensation|||||
||Storage Ambient Temperature||-30℃ ～+60℃|||||
||Storage Ambient Humidity||90% RH or less,no freezing,no condensation|||||
||MountingLocation||Indoors|||||
||MountingDirection||Upright|||||
||Protection Rating||WE Type||IP 65(IEC 60529)|||
||||LE Type||IP 54(IEC 60529)|||
||Environmental Condition||Upright|||||
||Insulation Resistance||More than 5M Ω at 500 VDC between the livepart and non-current carryingmetallicpart|||||
||Withstand Voltage||500 VAC applied for 1 min between live part<br>and non-current carryingmetallicpart without breakinginsulation|||||
||Mass (Tolerance:±10%)||(LED Unit)+[Buzzer Unit]|||||
||||WE Type||0.1kg+(0.04kg)×Tiers +[0.05kg]|||
||||LE Type||0.39kg+(0.04kg)×Tiers +[0.05kg]|||
||Outer Dimensions||Refer to the Outer Dimension Drawing|||||
||Buzzer Sound<br>/Typical Frequency||No.1|Rapid intermittent beep/ 3,378Hz||||
||||No.2|Continuous beepsound / 3,378Hz||||
||||No.3|Rapid Hi-Lo / 2,016Hz&3,012Hz||||
||||No.4|Sweepsound / 1,000Hz-4,032Hz||||
||Setting||Dependingon DIP Switch Settings Refer to the 7.Buzzer Pattern Set-up|||||
||Sound  Pressure Level||Typ.85dB|||||
||||Sound Reduction Approx. -10dB<br>Dependingon DIP Switch Settings     Refer to the 7.Buzzer Pattern Set-up|||||
||Environmental Condition||Buzzer sound No.4 was measured from the total circumfrence of the Buzzer Unit at 1m|||||
|Interfaces||Power Supply|Screwless Terminal Block(24V DC)|||||
||||Supported<br>Wire Diameter|||Single wire：φ0.5～1.2mm Stranded wire：0.2-1.5mm2(AWG24-16)||
|||Ethernet|RJ-45 Connector|||||
|Network Communication Format|||Ethernet (IEEE802.3 Conformity)<br>10BASE-T/100BASE-TX(Auto-MDI/MDIX)|||||
|Operation Interface|||Switch for Initialize ×1pc|||||
|Accessories|||WE Type||Hexagon nut with flange(M3)×3pcs|||
||||LE Type||L-bracket ×1pc|||
|Supported Unit|||LED Unit||||LR5-E-□、LR5-E-□Z<br>*Maximum number of 5 tiers for LED Units|
||||Buzzer Unit||||LR5-BW|
||||WD transmitter||||WDT-5LR-Z2|
|Supported Option|||Wall-Mount Bracket||||SZK-002W,SZK-001U|
||||Circular Bracket||||SZ-010|
||||L-bracket||||SZL-001|
||||Circular Bracket||||SZW-001W|
||||MountingBracket||||SZW-002W|
||||AC Adapter||||ADP-001C|



|||Drawing No.|Rev.|Page|
|---|---|---|---|---|
|||LR5-02WE-W18|B|3/8|
||||||
|Conformity Standards|UL 508 ,CAN/CSA C22.2 No.14-18<br>FCC Part15 SubpartB(Class A), ICES-003 Issue 7(Class A)<br>EN 61000-6-4, EN 61000-6-2, EN IEC 63000<br>KS C 9610-6-4,KS C 9610-6-2||||
|Remarks|・Due to the characteristics of the LED elements, a variation in difference of<br>the color tone and brightness of every product may occur<br>・Conforms to the CE/UKCA requirements<br>・UL Recognized Component(File No.E215660)<br>・Modbus is a registered trademark of Modicon Inc.<br>(Schneider Automation International).<br>・Microsoft Edge is registered trademark of Microsoft Corporation in the United States<br>and other countries.<br>・Google Chrome is a trademark or registered trademark of Google LLC.||||



## **2.Model Number Configuration** 

**==> picture [449 x 351] intentionally omitted <==**

**----- Start of picture text -----**<br>
Unit Model(Body Unit)<br>L R 5 －0 2 Ｗ ＥＮＷ<br>Size Body Color<br>5 Φ50 W Off-white<br>Rated Voltage Mounting/Wiring<br>02 24V DC WE Direct mounting, Ethernet communication<br>LE Mounting with pole/L-bracket, Ethernet communication<br>Assembly Model<br>—<br>L R 5 －3 0 2 ＷＥＢＷ ＲY G<br>LED Unit Color<br>R Red<br>Body Color Y Amber<br>Size Rated Voltage W Off-white G Green<br>5 Φ50 02 24V DC B Blue<br>Buzzer Unit C White<br>Tiers B With buzzer From top to bottom<br>1 1Tier N No buzzer<br>2 2Tiers<br>3 3Tiers Mounting/Wiring<br>4 4Tiers WE Direct mounting, Ethernet communication<br>5 5Tiers LE Mounting with pole/L-bracket, Ethernet communication<br>**----- End of picture text -----**<br>


|Drawing No.|Rev.|Page|
|---|---|---|
|LR5-02WE-W18|B|4/8|



## **3.Action Specifications** 

|**3.Action Specifications**||||
|---|---|---|---|
|LED unit operation control||7patterns + off can be controlled for each LED unit color||
||Flashing<br>Pattern|1|Continuous ON|
|||2|Flashing(Slow) 【0.5sec ON / 0.5sec OFF】|
|||3|Flashing(Medium) 【0.25sec ON / 0.25sec OFF】|
|||4|Flashing(Fast) 【0.125sec ON / 0.125sec OFF】|
|||5|Single Flash|
|||6|Double Flash|
|||7|Triple Flash|
|Buzzer unit operation control||ON/OFF control||



※ The intermittent buzzer and the LED pattern do not synchronize. 

## **4.Function Specifications** 

## 4.1 LED unit, Buzzer unit control function 

|4.1 LED unit, Buzzer unit control|function|
|---|---|
|Modbus/TCP|Controllable with Modbus/TCP Command|
|HTTP/HTTPS|Controllable with HTTP/HTTPS Command|
|Socket Communication|Controllable with PNS Command|
|4.2 Status Acquisition Function||
|Modbus/TCP|Current status of Signal Tower, Buzzer<br>can be acquired byModbus/TCP Command.|
|HTTP/HTTPS|Current status of Signal Tower, Buzzer and Firmware Version<br>can be acquired byHTTP/HTTPS Command.|
|Socket Communication|Current status of Signal Tower,Buzzer can be acquired byPNS Command.|



## 4.3 External Monitoring Function 

|Ping M|onitoring|Network abnormalitydetection bysendingPingnetwork devices|
|---|---|---|
||Number of Monitoring|1|
||MonitoringCycle|1～600 seconds|
||SendingCount|The number of times to detect can be set from 1 to 30.|
||Number of Sending|The number of sendingPingbyone monitoringcan be set from 1 to 3.|
|Number of Monitoring<br>Modbus/TCP Monitoring||Monitor the connection status with the Modbus/TCP master|
||Number of Monitoring|1|
|4.4 Setting Function|||
|<br>Automatic Network Setting||Network setting in this product can communicate with<br>a DHCP server to be set automatically.|
|Configuration Setting||Various configurations of the Main Unit can be read and written as settingfiles|
|Main Unit Setting||Various settings of the main body can be done with a web browser.<br>Supported browsers：Microsoft Edge,Google Chrome|
|Firmware Update||Firmware of the main unit can be updated usingWEB browser.|
|Languages supported<br>on the settingscreen||Japanese, English, Traditional Chinese, Sinplified Chinese, Korean, Thai<br>German,French,Italian,Spanish|



Drawing No. Rev. Page LR5-02WE-W18 B 5/8 

## **5.Wiring** 

- ・Fuse 

Fuse Rating 250V / 1A 

   - ※Reccomended Fuse : 250V/1A (5 × 20mm Fast-Acting Glass Body Cartridge Fuse) 

- ・LAN cable 

Since the RJ-45 connector at the end of the LAN cable is connected to the body, it should meet the dimensional requirements shown below. 

**==> picture [257 x 175] intentionally omitted <==**

**----- Start of picture text -----**<br>
WE RJ-45 connector<br>Wire entry hole’ Jy > Pa<br>(¢20mm) L<br>JJn : 4 a<br>LE Type NeX |N< ™ 40 mm<br>Inner diameter of pole)<br>(¢ 15.5mm)<br>*When using the wall-mount bracket SZK-002W and SZK-001U,<br>you have to use LAN cable with a diameter of 15 mm or less.<br>**----- End of picture text -----**<br>


Drawing No. Rev. Page LR5-02WE-W18 B 6/8 

## **6.Outer Dimensions** 

**==> picture [472 x 621] intentionally omitted <==**

**----- Start of picture text -----**<br>
6.1 [WE] Direct mounting<br>φ50 Unit：mm<br>|}<—>|<br>φ50<br>1<br>53.5<br>2<br>19<br>40 40<br>3 3<br>LR5-02WE   :   99<br>LR5-102WE : 173.5<br>LR5-102WE : 139<br>LR5-202WE : 213.5<br>| | LR5-202WE : 179<br>LR5-302WE : 253.5<br>LR5-302WE : 219<br>LR5-402WE : 293.5<br>LR5-402WE : 259<br>LR5-502WE : 333.5<br>LR5-502WE : 299<br>4 4<br>80 80<br>5 5<br>12 12<br>6 6<br>7 7<br>RJ-45 ~_S Mounting dimensions<br>terminalot AN wy) Soe|<br> block “el as Ce<br>initialize —--L. +<br>Removed Direct Mount Bracket<br>Switch for | (oe $30<br>120° ASO ]<br>No. Name Material<br>1 Buzzer Unit PC(Off-white) Dame<br>2 Head Cover PC(Off-white) Namie (G20) Untimm)<br>3 Globe PC(Color based on LED unit)<br>4 Body PC(Off-white)<br>5 Direct Mount Bracket PC(Off-white)<br>6 Waterproof Packing Silicone Rubber<br>7 Mounting Bolt(M3) Steel<br>**----- End of picture text -----**<br>


※Maximum Board Thickness：7 

|Drawing No.|Rev.|Page|
|---|---|---|
|LR5-02WE-W18|B|7/8|



**==> picture [476 x 608] intentionally omitted <==**

**----- Start of picture text -----**<br>
6.2 [LE] Mounting with pole/L-bracket,<br>φ50 Unit：mm<br>k—|<br>φ50<br>1 53.5 2<br>19<br>3 40 3 40<br>a :<br>LR5-02LE   : 114<br>LR5-102LE : 188.5<br>LR5-102LE : 154<br>LR5-202LE : 228.5<br>LR5-202LE : 194<br>LR5-302LE : 268.5<br>LR5-302LE : 234<br>LR5-402LE : 308.5<br>LR5-402LE : 274<br>LR5-502LE : 348.5<br>LR5-502LE : 314<br>4 4<br>(20) (20)<br>5 5<br>φ21.7 φ21.7<br>6 6<br>( H—, (280 (). (280 terminal blockSwitch for . Raw/<br>initialize<br>9 9 Removed Pole Mount Bracket<br>(32)<br>8 8 (20)<br>7 80<br>7 u \<br>20 55<br>No. Name Material Mounting dimensions<br>12 Head CoverBuzzer Unit PC(OffPC(Off--white)white) Va L-bracket Outline<br>3 Globe PC(Color based on LED unit) 2-611 PT a<br>4 Body PC(Off-white)<br>5 Pole Bracket PC<br>6 Pole AL<br>|~e— + pe<br>7 Rubber Bushing EPR<br>8 L-bracket Steel (t=3)<br>9 Hexagon Nut M22 SUM<br>**----- End of picture text -----**<br>


|Drawing No.|Rev.|Page|
|---|---|---|
|LR5-02WE-W18|B|8/8|



## **7.Buzzer Pattern Set-up** 

If your product is a model with a buzzer unit ( B ), you can set a buzzer sound and volume. To set them, you have to remove the buzzer unit and configure the DIP switches on its bottom.