LR10-02WJNW

|Drawing No.|Rev.|Page|
|---|---|---|
|LR10-502WJNW-W18|A|1 / 9|



## SPECIFICATIONS 

|[1.GeneralSpecifications]|[1.GeneralSpecifications]|[1.GeneralSpecifications]|||||
|---|---|---|---|---|---|---|
|Product Name|||Signal Tower||||
|Model|||LR10-□02□□W||LR10-□M2WJ□W||
|Rated Voltage|||24V DC||100-240V AC(50/60Hz)||
|OperatingVoltage Range<br>~~SSS~~|||21.6-26.4V DC<br>~~SSS~~||90-250V AC<br>~~SSS~~||
|Rated Power<br>Consumption<br>(Per Unit)<br>~~SSS~~<br>~~——————~~||Typ.<br>~~SSS~~|LED Unit：1.4W(※1)<br>~~SSS~~||LED Unit：1.6W(※1)<br>~~SSS~~||
||||Buzzer Unit：1.7W(※2)<br>~~SSS~~||Buzzer Unit：2.0W(※2)<br>~~SSS~~||
||||BodyUnit：0.4W(※3)<br>~~SSS~~||BodyUnit：0.7W(※3)<br>~~SSS~~||
|||Max.<br>~~SSS~~<br>~~——————~~|LED Unit：1.6W(※1)<br>~~SSS~~<br>~~——————~~||LED Unit：2.0W(※1)<br>~~SSS~~<br>~~——————~~||
||||Buzzer Unit：2.0W(※2)<br>~~SSS~~<br>~~——————~~||Buzzer Unit：2.3W(※2)<br>~~SSS~~<br>~~——————~~||
||||BodyUnit：0.4W(※3)<br>~~SSS~~<br>~~——————~~||BodyUnit：0.8W(※3)<br>~~SSS~~<br>~~——————~~||
|Inrush Current<br>~~SSS~~<br>~~——————~~|||None<br>~~SSS~~<br>~~——————~~||Less than 50A/2ms<br>~~SSS~~<br>~~——————~~||
|Standby Power<br>Consumption<br>~~i~~|||LED Unit：0.2W<br>~~————____"”|yTN~~||LED Unit：0.3W<br>~~————____"”|yTN~~||
||||Buzzer Unit：0.2W<br>~~————____"”|yTN~~||Buzzer Unit：0.4W<br>~~————____"”|yTN~~||
||||BodyUnit：0.2W<br>~~————____"”|yTN~~||BodyUnit：0.7W<br>~~————____"”|yTN~~||
|OperatingAmbient Temperature|||-20℃to +50℃||||
|OperatingAmbient Humidity|||Less than 90 %(No condensation)||||
|Storage Ambient Temperature|||-30℃to +60℃||||
|Storage Ambient Humidity|||Less than 90 %(No condensation)||||
|MountingLocation|||Indoor / Outdoor *TYPE 4X indoor use only.(UL50E)||||
|MountingDirection<br>~~—————————————~~|||Upright / Inverted<br>~~—————————————~~||||
|Protection Rating<br>Environmental<br>~~—————————————~~|||IP6X,IPX6(IEC 60529),IPX9K(ISO 20653)/TYPE 4X,13(NEMA,UL50E)<br>~~—————————————~~||||
||Environmental<br>~~—————————————~~||Upright<br>~~—————————————~~||||
|Insulation Resistance<br>~~a ~~|||More than 1MΩ at  500VDC between live part<br>and non-current carryingmetallicpart<br> ~~ee~~<br>~~ee~~||More than 1MΩ at  500VDC between live part<br>and non-current carryingmetallicpart<br>~~ee~~<br>~~ee~~||
|Withstand Voltage<br>~~ee~~|||500VAC applied for 1min between live part and non-<br>current carrying metallic part without breaking insulation<br>~~ee~~<br>~~ee~~||1500VAC applied for 1min between live part and non-<br>current carrying metallic part without breaking insulation<br>~~ee~~<br>~~ee~~||
|Buzzer Sound /<br>Typical Frequency<br>Setting<br>~~ee~~|||No.1<br>~~ee~~|Rapid Intermittent Beep/2,941Hz<br>~~ee~~<br>~~ee~~|No.2<br>~~ee~~|Continuous BeepSound/2,941Hz<br>~~ee~~<br>~~ee~~|
||||No.3<br>~~ee~~|Rapid Hi-Low/2,000Hz&3,012Hz<br>~~ee~~|No.4<br>~~ee~~|SweepSound/1,000Hz-4,032Hz<br>~~ee~~|
||Setting<br>~~ee~~||Dependingon DIP Switch Settings. Refer to the 6.Buzzer Pattern Set-up<br>~~ee~~||||
|Environmental Condition<br>Sound Pressure Level(Typ.)<br>~~SOT~~|||92dB<br>~~SOT~~||||
||Environmental Condition<br>~~SOT~~||Buzzer sound No.4 was measured from the total circumfrence of the Buzzer Unit at 1m<br>~~SOT~~||||
|Setting<br>Flash Pattern<br>~~Se~~|||Continuous / Blinking,Rotating,Triple-Flash,Dimmed continuous / Dimmed Blinking<br>~~Se~~||||
||Setting<br>~~Se~~||Refer to the 5.2 Flash Pattern Setting<br>~~Se~~||||
|Rotation FlashingRate(Typ.)<br>~~Se~~|||120rpm±15%(102-138rpm)<br>~~Se~~||||
|FlashingRate(Typ.)|||Blinking/Dimmed Blinking：60 Flashes Per Minute,Triple-Flash：120 Flashes Per Minute||||
|Outer Dimensions|||Refer to the 3.MountingDimensional Drawing||||
|Conformity<br>Standards<br>~~oe~~<br>~~jp]~~|UL<br>~~oe~~||UL508,CSA-C22.2 No.14(File No.E215660)<br>~~oe~~||||
||CE Marking<br>UKCA Marking<br>~~oe~~||EN61000-6-4, EN61000-6-2,<br>EN IEC 63000<br>~~oe~~||EN61000-6-4, EN61000-6-2,<br>EN IEC 63000,<br>EN60947-5-1,EN62471<br>~~oe~~||
||KC<br>~~oe~~||KS C 9610-6-4,KS C 9610-6-2<br>~~oe~~||||
||FCC<br>~~oe~~||FCC Part15 SubpartB ClassA<br>~~oe~~||||
||IC<br>~~oe~~<br>~~jp]~~||ICES-003 Class A<br>~~oe~~<br>~~jp]___|~~||||
||EAC<br>~~oe~~<br>~~jp]~~||TR CU 020<br>TR EAEU 037<br>~~oe~~<br>~~jp]___|~~||TR CU 020,<br>TR EAEU 037,TR CU 004<br>~~oe~~<br>~~___|~~||



|~~rr~~|~~rr~~|~~rr~~|~~rr~~|~~rr~~|~~rr~~|DrawingNo.<br>~~rr~~|DrawingNo.<br>~~rr~~|Rev.|Rev.|Page|
|---|---|---|---|---|---|---|---|---|---|---|
|||||||LR10-502WJNW-W18<br>~~rr~~||A||2 / 9|
|Mass<br>(Tolerance<br>±10%）|Assembly<br>model<br>WJ<br>~~peed~~||Tiers<br>~~a~~<br>~~a~~|LR10-□02WJNW<br>~~ee~~<br>~~es~~|LR10-□02WJBW<br>~~rr~~<br>~~es~~<br>~~es~~||LR10-□M2WJNW<br>~~rr~~||LR10-□M2WJBW||
||||1<br>~~a~~<br>~~a~~<br>~~ee~~|0.83kg<br>~~ee ~~<br>~~es~~<br>~~ee~~|0.89kg<br> ~~es~~<br>~~es~~<br>~~es~~||0.85kg<br>~~Ge~~||0.91kg||
||||2<br>~~a~~<br>~~ee~~<br>~~a~~|1.01kg<br>~~es~~<br>~~ee~~<br>~~es~~|1.07kg<br>~~es~~<br>~~es~~<br>~~es ne~~||1.04kg<br>~~Ge~~<br>~~ne~~||1.10kg||
||||3<br>~~ee~~<br>~~a~~<br>~~a~~|1.20kg<br>~~ee~~<br>~~es~~<br>~~es~~|1.26kg<br>~~es~~<br>~~es ne~~<br>~~es ne~~||1.22kg<br>~~Ge~~<br>~~ne~~<br>~~ne~~||1.28kg||
||||4<br>~~a~~<br>~~a~~<br>~~es~~|1.38kg<br>~~es~~<br>~~es~~<br>~~es~~|1.44kg<br>~~es ne~~<br>~~es ne~~<br>~~es~~||1.41kg<br>~~ne~~<br>~~ne~~||1.47kg||
||||5<br>~~a~~<br>~~es~~<br>~~peed~~|1.57kg<br>~~es~~<br>~~es~~<br>~~peed~~|1.63kg<br>~~es ne~~<br>~~es~~<br>~~peed~~||1.59kg<br>~~ne~~<br>~~peed~~||1.65kg<br>~~ee~~||
||Unit Model WJ<br>~~es~~<br>~~peed~~|||0.64kg<br>~~es~~<br>~~peed~~|~~es~~<br>~~peed~~||0.66kg<br>~~peed~~||~~ee~~||
||Assembly<br>model<br>WM<br>~~peed~~<br>~~ee~~<br>~~es~~||Tiers<br>~~peed~~<br>~~ee~~|LR10-□02WMNW<br>~~peed~~<br>~~ee~~|||~~peedee~~<br>~~ee~~||||
||||3<br>~~peed~~<br>~~ee~~<br>~~es~~|1.15kg<br>~~peed~~<br>~~ee~~<br>~~Cs~~|||~~peed ee~~<br>~~ee~~<br>~~Cs~~||||
||Unit Model WM<br>~~es~~|||0.59kg<br>~~Cs~~|||~~Cs~~||||
|Remarks<br>~~es~~||Due to the characteristics of the LED elements, there may be a slight variation in color tone and brightness<br>between products.<br>※1 Environmental Condition:Flash Pattern "Continuous"<br>※2 Environmental Condition:Buzzer Sound "No.4 Sweep Sound"<br>※3 Environmental Condition:Signal Wire×8 - Common are short-circuited.<br>~~esCs~~|||||||||



[2.Model Number Configuration] 

## ＜ **Assembly Model** ＞ 

**==> picture [441 x 382] intentionally omitted <==**

**----- Start of picture text -----**<br>
- -<br>L R 1 0 3 02 WJ N W RYG<br>■ Tiers ■ Rated Voltage ■ Buzzer ■ Body Colo ｒ ■ LED Unit Co lor<br>1 ： 1Tier 02 ： 24V DC B ： With Buzzer W ： Off-white R ： Red<br>2 ： 2Tiers M2 ： 100-240V AC N ： No Buzzer Y ： Amber<br>3 ： 3Tiers G ： Green<br>4 ： 4Tiers B ： Blue<br>5 ： 5Tiers ■ Mounting/Wiring C ： White<br>WJ ： Direct Mount/Cabtyre Cord  From top to bottom<br>WM ： Direct Mount/M12 Connector (Only 02 type)<br>Unit Model(Body Unit) ＞<br>-<br>L R 1 0 02 WJ N W<br>■ Rated Voltage ■ Buzzer ■ Body Colo ｒ<br>02 ： 24V DC N ： No Buzzer W ： Off-white<br>M2 ： 100-240V AC<br>■ Mounting/Wiring<br>WJ ： Direct Mount/Cabtyre Cord<br>WM ： Direct Mount/M12 Connector (Only 02 type)<br>**----- End of picture text -----**<br>


＜ **Unit Model(Body Unit)** ＞ 

|DrawingNo.|Rev.|Page|
|---|---|---|
|LR10-502WJNW-W18|A|3 / 9|



## [3.Outer Dimensions] 

**==> picture [501 x 680] intentionally omitted <==**

**----- Start of picture text -----**<br>
CJ WJ Direct Mount with Cabtyre Cord （Unit:mm）<br>LR10-□□WJBW LR10-□□WJNW<br>© 100<br>① © 100<br>②<br>“oe) Nc<br>③ ③<br>) te! O<br>tt<br>LR10-02 / M2 : 100<br>LR10-1□ : 179.5<br>LR10-1□ : 160<br>LR10-2□ : 239.5<br>LR10-2□ : 220<br>1 LR10-3□ : 299.5 rl<br>LR10-3□ : 280<br>LR10-4□ : 359.5<br>LR10-4□ : 340<br>LR10-5□ : 419.5<br>LR10-5□ : 400<br>!I LR10-102 : 193.5<br>④ ④<br>-<br>⑤ ⑤<br>⑥ ⑥<br>⑦ ⑦<br>・Maximum Board Thickness ： 6<br>・Cabtyre Cord po Accessory<br>Plain Washer(M5) Nut(M5)<br>Wire Diameter : (ø8.5)<br>SUS SUS<br>Power Supply Wire : AWG18<br>Signal Wire : AWG24<br>Cord Length : (500) 3 pcs. 3 pcs.<br>Number Name Material UL Flammability<br>1 Buzzer Case PC V-0<br>2 Head Cover PC V-0<br>3 Globe PC V-2<br>4 Body PC 5VA<br>5 Mount PC HB<br>6 Mounting Gasket Silicone Rubber -<br>7 Cabtyre Cord PVC VW-1<br>**----- End of picture text -----**<br>


Drawing No. Rev. Page LR10-502WJNW-W18 A 4 / 9 

**==> picture [458 x 388] intentionally omitted <==**

**----- Start of picture text -----**<br>
LJ WM Direct Mount/M12 Connector （Unit:mm）<br>LR10-□02WMNW<br>©100<br>①<br>ae Number Name Material UL Flammability<br>1 Head Cover PC V-0<br>② 2 Globe PC V-2<br>3 Body PC 5VA<br>i:<br>4 Mount PC HB<br>5 Mounting Gasket Silicone Rubber -<br>6 M12 Connector (12pin female) Nickel Plating -<br>|»<br>Accessory<br>LR10-02 : 100<br>Plain Washer(M5) Nut(M5)<br>LR10-302 : 280<br>SUS SUS<br>3 pcs. 3 pcs.<br>③<br>・Maximum Board Thickness ： 6<br>— N<br>④<br>⑤<br>⑥<br>**----- End of picture text -----**<br>


|M12 Connector Pin Configuration|M12 Connector Pin Configuration|M12 Connector Pin Configuration|M12 Connector Pin Configuration|M12 Connector Pin Configuration|Pin No.|Function Name|
|---|---|---|---|---|---|---|
||||||1|BlinkingCommon|
|113||2|10||2<br>3|LED C<br>LED B|
|4|||ee|1|4<br>5|LED G<br>Common|
||||||6|LED Y|
|||||9|7|Power Supply|
|6|5||8|12|8<br>9<br>10|LED R<br>Buzzer<br>Power Supply|
||||||11|Pattern1|
||||||12|Pattern2|



**==> picture [193 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
Drawing No. Rev. Page<br>LR10-502WJNW-W18 A<br>5 / 9<br>**----- End of picture text -----**<br>


**==> picture [458 x 35] intentionally omitted <==**

**----- Start of picture text -----**<br>
[4.Mounting Diagram]<br>（Unit:mm）<br>**----- End of picture text -----**<br>


**==> picture [461 x 288] intentionally omitted <==**

**----- Start of picture text -----**<br>
Drawing No. Rev. Page<br>LR10-502WJNW-W18 A<br>6 / 9<br>[5.Wiring Diagram]<br>5.1 Wiring Example<br>Wiring Example Index<br>LED Red Red / 9<br>)11<br>1i] i]<br>Function Name Pin No.<br>(WMIM12 Connector)<br>1<br>1<br>1<br>i<br>i]<br>1<br>i<br>Lead Wire Color<br>([WJ] Cabtyre code type)<br>(Note) The lead wire color does not<br>indicate the LED luminescence color.<br>5.1.1 【LR10-02】Wiring Example<br>**----- End of picture text -----**<br>


**==> picture [193 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
Drawing No. Rev. Page<br>LR10-502WJNW-W18 A<br>7 / 9<br>**----- End of picture text -----**<br>


Drawing No. Rev. Page LR10-502WJNW-W18 A 8 / 9 

## 5.1.2 【LR10-M2】Wiring Example 

**==> picture [31 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
L N<br>**----- End of picture text -----**<br>


**==> picture [37 x 23] intentionally omitted <==**

**----- Start of picture text -----**<br>
L 240 VAC N<br>**----- End of picture text -----**<br>


Drawing No. Rev. Page LR10-502WJNW-W18 A 9 / 9 

## 5.2 Flash Pattern Setting 

It can be switched to Continuous, Rotating, Triple-Flash, or Dimmed continuous by shorting the common line with Pattern 1 or Pattern 2. The settings are shown in the table below. 

## ■Setup Table 

**==> picture [241 x 171] intentionally omitted <==**

**----- Start of picture text -----**<br>
Wiring<br>Flash Pattern<br>pattern1-Common pattern2-Common<br>OFF OFF Continuous<br>ON OFF Rotating<br>OFF ON Triple-Flash<br>ON ON Dimmed continuous<br>Signal line<br>02 M2<br>Current Capacity (Is) 10mA or more 10mA or more<br>Withst and Voltage (Vs) 30V or more 30V or more<br>Lealage Current (I) 0.1mA or less 0.1mA or less<br>**----- End of picture text -----**<br>


## 5.3 External Contact Capacity 

## ■Signal line 

## ■Recommended Fuse 

Fuse Rating 250V / 1A 

## [6.Buzzer Pattern Set-up] 

Set up the preferred pattern, using the DIP Switch after removing the buzzer unit.