Image not available
Illustrative purposes only
LPZ3314-105MRB
Power Inductor (SMD), 1 mH, 100 mA, Shielded, 90 mA, LPZ
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: COILCRAFT
- Product type: SMD Power Inductors
- Inductance: 1mH
- Product Range: LPZ
- Product Width: 3.3mm
- Product Height: 1.3mm
- Product Length: 3.3mm
- DC Resistance Max: 31ohm
- RMS Current (Irms): 100mA
- Power Inductor Case: 3.3mm x 3.3mm x 1.3mm
- Inductance Tolerance: ± 20%
- Inductor Construction: Shielded
- Saturation Current (Isat): 90mA
| Delivery and price | |
|---|---|
| Units per pack | 5000 |
| Price | 0.518 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
Document 1244-1 ## **Shielded Power Inductors High Inductance** - High inductance values (220 – 4700 µH) not available in the corresponding LPS series of parts - Rugged construction improves pick and place operation ## **Core material** Ferrite **Core and winding loss** See www.coilcraft.com/coreloss **Environmental** RoHS compliant, halogen free **Terminations** RoHS compliant matte tin over nickel over silver. **Ambient temperature** –40°C to +85°C with I rms current, +85°C to +125°C with derated current **Storage temperature** Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C **Resistance to soldering heat** Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles **Moisture Sensitivity Level (MSL)** 1 (unlimited floor life at <30°C / 85% relative humidity) **Failures in Time (FIT) / Mean Time Between Failures (MTBF)** 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 **PCB washing** Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. ||**Inductance**2|**DCR max**3|**SRF typ**4||**Isat(A)**5||**Irms**|**rms(A)**6| |---|---|---|---|---|---|---|---|---| |**Part number**1|**±20%(µH)**|**(Ohms)**|**(MHz)**|**10% drop 20% dro**|**20% drop 30% dro**|**30% drop**|**20°C rise 40°C rise**|**20°C rise 40°C rise**| |LPZ3008-224MR_|220|11.5|9.0|0.067|0.073|0.076|0.100|0.145| |LPZ3008-334MR_|330|18.0|7.0|0.059|0.064|0.066|0.090|0.130| |LPZ3010-334MR_|330|18.5|7.0|0.10|0.105|0.115|0.085|0.11| |LPZ3015-334MR_|330|23.0|5.0|0.10|0.11|0.11|0.070|0.095| |LPZ3314-105MR_|1000|31.0|3.0|0.090|0.099|0.100|0.082|0.100| |LPZ3314-155MR_|1500|44.0|2.7|0.080|0.086|0.090|0.060|0.080| |LPZ4012-335MR_|3300|65.0|0.95|0.074|0.078|0.080|0.050|0.065| |LPZ4018-155MR_|1500|25.0|2.4|0.095|0.10|0.105|0.080|0.11| |LPZ4018-185MR_|1800|31.5|2.3|0.090|0.095|0.10|0.070|0.095| |LPZ4018-225MR_|2200|32.5|2.1|0.088|0.094|0.10|0.070|0.090| |LPZ4018-335MR_|3300|48.0|1.6|0.082|0.092|0.094|0.055|0.075| |LPZ4414-155MR_|1500|26.4|2.2|0.096|0.099|0.10|0.085|0.11| |LPZ4414-185MR_|1800|35.0|1.9|0.089|0.094|0.097|0.075|0.10| |LPZ4414-225MR_|2200|42.5|1.9|0.082|0.089|0.092|0.065|0.080| |LPZ4414-335MR_|3300|56.0|1.3|0.072|0.078|0.083|0.055|0.070| |LPZ5010-105MR_|1000|28.0|3.0|0.087|0.096|0.10|0.080|0.11| |LPZ5015-335MR_|3300|55.0|1.7|0.064|0.072|0.076|0.055|0.075| |LPZ5015-475MR_|4700|80.0|1.4|0.062|0.069|0.072|0.045|0.065| 1. When ordering, please specify **termination** and **packaging** codes: ~~U_—_ -~~ **LPZ3008-334MRC** - **Termination: R** = RoHS compliant matte tin over nickel over silver. Special order, added cost: **Q** = RoHS tin-silver-copper (95.5/4/0.5) or **P** = non-RoHS tin-lead (63/37). - **Packaging: C** = 7″ machine-ready reel. EIA-481 embossed plastic tape). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. - Refer to Doc 362 “Soldering Surface Mount Components” before soldering. - **B** = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. - **D** = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked Document 1244-1 Revised 01/05/15 Document 1244-2 ## **Shielded Power Inductors – LPZ3008** ## **L vs Current** **==> picture [244 x 402] intentionally omitted <==** **----- Start of picture text -----**<br> 1000<br>800<br>700<br>600<br>500<br>400<br>330 µH<br>300<br>220 µH<br>200<br>100<br>0.0001 0.001 0.01 0.10<br>Current (A)<br>Current Derating<br>120<br>110<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30<br>20<br>Isat<br>10<br>Irms<br>0<br>-40 -20 0 20 40 60 80 100 120 140<br>Ambient temperature (°C)<br>Inductance (µH)<br>Percent of rated Current<br>25°C<br>**----- End of picture text -----**<br> ## **L vs Frequency** **==> picture [242 x 185] intentionally omitted <==** **----- Start of picture text -----**<br> 1000<br>800<br>700<br>600<br>500<br>400<br>330 µH<br>300<br>220 µH<br>200<br>100<br>0.01 0.1 1 10<br>Frequency (MHz)<br>Inductance (µH)<br>**----- End of picture text -----**<br> **==> picture [83 x 14] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions are in [inches ]<br>mm<br>**----- End of picture text -----**<br> **Weight** 22 – 25 mg **Packaging** 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth **Recommended pick and place nozzle** OD: 3 mm; ID: ≤ 1.5 mm **==> picture [113 x 44] intentionally omitted <==** **==> picture [188 x 46] intentionally omitted <==** Document 1244-2 Revised 01/05/15 **==> picture [82 x 33] intentionally omitted <==** Document 1244-3 ## **Shielded Power Inductors – LPZ3010** ## **L vs Current** **==> picture [244 x 402] intentionally omitted <==** **----- Start of picture text -----**<br> 1000<br>800<br>700<br>600<br>500<br>400<br>330 µH<br>300<br>200<br>100<br>0.0001 0.001 0.01 0.10<br>Current (A)<br>Typical Current Derating<br>120<br>110<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30<br>20<br>Isat<br>10<br>Irms<br>0<br>-40 -20 0 20 40 60 80 100 120 140<br>Ambient temperature (°C)<br>Inductance (µH)<br>Percent of rated Current<br>25°C<br>**----- End of picture text -----**<br> ## **L vs Frequency** **==> picture [242 x 185] intentionally omitted <==** **----- Start of picture text -----**<br> 1000<br>800<br>700<br>600<br>500<br>400<br>330 µH<br>300<br>200<br>100<br>0.01 0.1 1 10<br>Frequency (MHz)<br>Inductance (µH)<br>**----- End of picture text -----**<br> **==> picture [83 x 14] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions are in [inches ]<br>mm<br>**----- End of picture text -----**<br> **Weight** 25 – 32 mg **Packaging** 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth **Recommended pick and place nozzle** OD: 3 mm; ID: ≤ 1.5 mm **==> picture [113 x 44] intentionally omitted <==** **==> picture [188 x 46] intentionally omitted <==** Document 1244-3 Revised 01/05/15 **==> picture [82 x 33] intentionally omitted <==** Document 1244-4 ## **Shielded Power Inductor – LPZ3015** ## **L vs Current** **==> picture [243 x 404] intentionally omitted <==** **----- Start of picture text -----**<br> 1000<br>800<br>700<br>600<br>500<br>400<br>330 µH<br>300<br>200<br>100<br>0.001 0.01 0.1 1.0<br>Current (A)<br>Current Derating<br>120<br>110<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30<br>20<br>Isat<br>10<br>Irms<br>0<br>-40 -20 0 20 40 60 80 100 120 140<br>Ambient temperature (°C)<br>25°C<br>Inductance (µH)<br>Percent of rated current<br>**----- End of picture text -----**<br> ## **L vs Frequency** **==> picture [242 x 185] intentionally omitted <==** **==> picture [83 x 14] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions are in [inches ]<br>mm<br>**----- End of picture text -----**<br> **Weight** 40 – 45 mg **Packaging** 1000/7″ reel; 3500/13″ reel; Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth **Recommended pick and place nozzle** OD: 3 mm; ID: ≤ 1.5 mm **==> picture [113 x 44] intentionally omitted <==** **==> picture [188 x 46] intentionally omitted <==** Document 1244-4 Revised 01/05/15 **==> picture [43 x 33] intentionally omitted <==** Document 1244-5 ## **– Shielded Power Inductors LPZ3314** ## **Typical L vs Current** ## **Typical L vs Frequency** ## **Current Derating** **==> picture [242 x 175] intentionally omitted <==** **----- Start of picture text -----**<br> 120<br>110<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30<br>20<br>Isat<br>10<br>Irms<br>0<br>-40 -20 0 20 40 60 80 100 120 140<br>Ambient temperature (°C)<br>25°C<br>Percent of rated current<br>**----- End of picture text -----**<br> **==> picture [105 x 139] intentionally omitted <==** **==> picture [60 x 60] intentionally omitted <==** **==> picture [82 x 14] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions are in [inches ]<br>mm<br>**----- End of picture text -----**<br> **Weight** 44.1 – 46.5 mg **Packaging** 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth **Recommended pick and place nozzle** OD: 3.3 mm; ID: ≤ 1.65 mm **==> picture [113 x 44] intentionally omitted <==** **==> picture [188 x 46] intentionally omitted <==** Document 1244-5 Revised 01/05/15 **==> picture [43 x 33] intentionally omitted <==** Document 1244-6 ## **– Shielded Power Inductors LPZ4012** ## **Typical L vs Current** ## **Typical L vs Frequency** **==> picture [505 x 314] intentionally omitted <==** **----- Start of picture text -----**<br> 0.1535 ±0.003*<br>Current Derating 3,90 ±0,076<br>120<br>110<br>100 0.1535 ±0.003* Winding<br>3,90 ±0,076 direction<br>90 XXX X<br>80<br>70 Dash Internal<br>60 number code Recommended<br>Land Pattern<br>50<br>0.0433 ±0.004* 0.105<br>40 1,10 ±0,10 2,66<br>30 0.059<br>1,50<br>20<br>Isat<br>10 Irms 0.0305<br>0 0.110 0.045 0,775 0.153<br>-40 -20 0 20 40 60 80 100 120 140 2,79 1,15 3,89<br>Ambient temperature (°C)<br>0.129<br>0.060<br>3,28<br>1,52<br>0.173<br>* Dimensions are of the case not including 4,40<br>the termination. For maximum overall<br>dimensions including the termination, add<br>0.005 in / 0,13 mm.<br>For optional tin-lead and tin-silver-copper<br>terminations, dimensions are for the<br>mounted part. Dimensions before mounting<br>can be an additional 0.005 inch / 0,13 mm). Dimensions are in [inches ]<br>mm<br>Percent of rated current 25°C<br>**----- End of picture text -----**<br> ## **Current Derating** **Weight** 54 – 64 mg **Packaging** 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.25 mm thick, 8 mm pocket spacing, 1.32 mm pocket depth **Recommended pick and place nozzle** OD: 4 mm; ID: ≤ 2 mm **==> picture [117 x 44] intentionally omitted <==** **==> picture [188 x 46] intentionally omitted <==** Document 1244-6 Revised 01/05/15 **==> picture [82 x 33] intentionally omitted <==** Document 1244-7 ## **– Shielded Power Inductors LPZ4018** ## **Typical L vs Current** ## **Typical L vs Frequency** **==> picture [242 x 186] intentionally omitted <==** ## **Current Derating** **==> picture [242 x 176] intentionally omitted <==** **----- Start of picture text -----**<br> 120<br>110<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30<br>20<br>Isat<br>10<br>Irms<br>0<br>-40 -20 0 20 40 60 80 100 120 140<br>Ambient temperature (°C)<br>25°C<br>Percent of rated current<br>**----- End of picture text -----**<br> **==> picture [84 x 14] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions are in [inches ]<br>mm<br>**----- End of picture text -----**<br> **Weight** 90 – 100 mg **Packaging** 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth **Recommended pick and place nozzle** OD: 4 mm; ID: ≤ 2 mm **==> picture [113 x 44] intentionally omitted <==** **==> picture [188 x 46] intentionally omitted <==** Document 1244-7 Revised 01/05/15 Document 1244-8 ## **– Shielded Power Inductors LPZ4414** ## **Typical L vs Current** ## **Typical L vs Frequency** **==> picture [242 x 185] intentionally omitted <==** **==> picture [505 x 315] intentionally omitted <==** **----- Start of picture text -----**<br> 0.169 ±0.004*<br>Current Derating 4,30 ±0,10<br>120<br>110<br>100 0.169 ±0.004* Winding<br>4,30 ±0,10 direction<br>90 XXXX<br>80<br>70<br>Dash Internal<br>60 number code<br>50<br>40 0.05511,40 max* Recommended<br>Land Pattern<br>30<br>0.059 0.128<br>20<br>Isat 1,50 3,25<br>10<br>Irms<br>0<br>-40 -20 0 20 40 60 80 100 120 140<br>Ambient temperature (°C) 0.0300,75 typ 0.1854,70 0.113,008 0.1243,15 0.0551,40<br>0.030 0.059<br>0,75 [typ] 1,50<br>0.118<br>* Dimensions are of the case not including 3,00<br>the termination. For maximum overall<br>0.185<br>dimensions including the termination, add<br>0.005 in / 0,13 mm. 4,70<br>For optional tin-lead and tin-silver-copper<br>terminations, dimensions are for the<br>mounted part. Dimensions before mounting<br>can be an additional 0.005 inch / 0,13 mm). Dimensions are in [inches ]<br>mm<br>25°C<br>Percent of rated current<br>**----- End of picture text -----**<br> ## **Current Derating** **Weight** 82.3 – 89.8 mg **Packaging** 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth **Recommended pick and place nozzle:** OD: 4.5 mm; ID: ≤ 2 mm **==> picture [117 x 44] intentionally omitted <==** **==> picture [188 x 46] intentionally omitted <==** Document 1244-8 Revised 01/05/15 **==> picture [82 x 33] intentionally omitted <==** Document 1244-9 ## **Shielded Power Inductor – LPZ5010** ## **Typical L vs Current** ## **Typical L vs Frequency** ## **Current Derating** **==> picture [243 x 175] intentionally omitted <==** **----- Start of picture text -----**<br> 120<br>110<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30<br>20<br>Isat<br>10<br>Irms<br>0<br>-40 -20 0 20 40 60 80 100 120 140<br>Ambient temperature (°C)<br>25°C<br>Percent of rated current<br>**----- End of picture text -----**<br> **==> picture [83 x 14] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions are in [inches ]<br>mm<br>**----- End of picture text -----**<br> **Weight** 70 – 75 mg **Packaging** 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.02 mm pocket depth **Recommended pick and place nozzle** OD: 5 mm; ID: ≤ 2.5 mm **==> picture [113 x 44] intentionally omitted <==** **==> picture [188 x 46] intentionally omitted <==** Document 1244-9 Revised 01/05/15 **==> picture [43 x 33] intentionally omitted <==** Document 1244-10 ## **Shielded Power Inductors – LPZ5015** ## **Typical L vs Current** ## **Typical L vs Frequency** **==> picture [243 x 183] intentionally omitted <==** ## **Typical Current Derating** **==> picture [242 x 176] intentionally omitted <==** **----- Start of picture text -----**<br> 120<br>110<br>100<br>90<br>80<br>70<br>60<br>50<br>40<br>30<br>20<br>Isat<br>10<br>Irms<br>0<br>-40 -20 0 20 40 60 80 100 120 140<br>Ambient temperature (°C)<br>25°C<br>Percent of rated current<br>**----- End of picture text -----**<br> **==> picture [88 x 14] intentionally omitted <==** **----- Start of picture text -----**<br> inches<br>Dimensions are in<br>mm<br>**----- End of picture text -----**<br> **Weight** 102 – 107 mg **Packaging** 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.57 mm pocket depth **Recommended pick and place nozzle** OD: 5 mm; ID: ≤ 2.5 mm **==> picture [113 x 44] intentionally omitted <==** **==> picture [188 x 46] intentionally omitted <==** Document 1244-10 Revised 01/05/15
Updated at February 9, 2023
Coilcraft is a globally recognized leader in the design and manufacture of high-performance magnetic components. Renowned for its engineering excellence, reliable delivery, and stringent quality standards, the company provides essential solutions for a wide array of demanding applications, including signal processing, RF, power management, and timing circuits. Our comprehensive portfolio of Coilcraft components is centered on their industry-leading inductor technologies. This encompasses a vast selection of high-efficiency power inductors designed to optimize modern power supply architectures, alongside precision RF inductors engineered to deliver exceptional stability and performance in high-frequency communications and wireless applications. To support complete electromagnetic compatibility and comprehensive circuit design, we also offer a variety of Coilcraft's specialized magnetic solutions. This includes robust common mode chokes and filters for effective EMC and RFI suppression, current sensing transformers, and a selection of inductor kits and assortments that provide design engineers with versatile options for rapid prototyping and development.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →