Image not available
Illustrative purposes only
LPV-100-24
LED Driver, ITE, 100 W, 24 VDC, 4.2 A, Constant Voltage, 90 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type: AC / DC LED Power Supplies
- Output Power Max:100W; Output Voltage Max:24V; Output Current:4.2A; LED Driver Mode:Constant Voltage; Input Voltage Min:90V; Input Voltage Max:264V; Product Range:LPV-100 Series; SVHC:No
- SVHC: No SVHC (25-Jun-2025)
- Product Range: LPV-100
- Output Current: 4.2A
- LED Driver Mode: Constant Voltage
- Output Power Max: 100W
- Input Voltage Max: 264V
- Input Voltage Min: 90V
- Output Voltage Max: 24VDC
- Power Supply Applications: ITE
| Delivery and price | |
|---|---|
| Units per pack | 100 |
| Price | 23.77 € |
| Current stock | 100+ |
| Lead time | 30 days |
Datasheet
100W Single Output Switching Power Supply L P \- 1 0 0 series ## ~~a~~ ## Features: ## * Constant voltage design **==> picture [167 x 83] intentionally omitted <==** **----- Start of picture text -----**<br> wv”<br>—— SS =<br>a<br>€ a<br>ym 1<br>oy<br>**----- End of picture text -----**<br> - Universal AC input / Full range - * Fully encapsulated with IP67 level (Note.8) - Withstand 300VAC surge input for 5 seconds - * Protections: Short circuit/ Over current/ Over voltage - Fully isolated plastic case - Cooling by free air convection - * 100% full load burn-in test - Low cost, high reliability * Suitable for LED lighting and moving sign applications(Note 7.) **==> picture [65 x 19] intentionally omitted <==** **----- Start of picture text -----**<br> SPECIFICATION<br>**----- End of picture text -----**<br> - 2 years warranty [G] 1P67 C E INPUT mores ENVIRONMENT EMC ~~EO~~ 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit. 8. Suitable for indoor use or outdoor use without direct sunlight exposure. File Name:LPV-100-SPEC 2012-03-26 **==> picture [513 x 730] intentionally omitted <==**
Updated at April 17, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →